summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-11-30nouveau/tu102: flush all pdbs on vmm flushDave Airlie
This is a hack around a bug exposed with the GSP code, I'm not sure what is happening exactly, but it appears some of our flushes don't result in proper tlb invalidation for out BAR2 and we get a BAR2 fault from GSP and it all dies. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231130010852.4034774-1-airlied@gmail.com
2023-11-30nouveau/gsp: document some aspects of GSP-RMTimur Tabi
Document a few aspects of communication with GSP-RM. These comments are derived from notes made during early development of GSP-RM support in Nouveau, but were not included in the initial patch set. Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Timur Tabi <ttabi@nvidia.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122202840.2565153-1-ttabi@nvidia.com
2023-11-29drm/panel: nt36523: fix return value check in nt36523_probe()Yang Yingliang
mipi_dsi_device_register_full() never returns NULL pointer, it will return ERR_PTR() when it fails, so replace the check with IS_ERR(). Fixes: 0993234a0045 ("drm/panel: Add driver for Novatek NT36523") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231129090715.856263-1-yangyingliang@huaweicloud.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231129090715.856263-1-yangyingliang@huaweicloud.com
2023-11-29drm/panel: starry-2081101qfh032011-53g: Fine tune the panel power sequencexiazhengqiao
For the "starry, 2081101qfh032011-53g" panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 6069b66cd962 ("drm/panel: support for STARRY 2081101QFH032011-53G MIPI-DSI panel") Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com
2023-11-29nouveau/gsp: replace zero-length array with flex-array member and use ↵Gustavo A. R. Silva
__counted_by Fake flexible arrays (zero-length and one-element arrays) are deprecated, and should be replaced by flexible-array members. So, replace zero-length array with a flexible-array member in `struct PACKED_REGISTRY_TABLE`. Also annotate array `entries` with `__counted_by()` to prepare for the coming implementation by GCC and Clang of the `__counted_by` attribute. Flexible array members annotated with `__counted_by` can have their accesses bounds-checked at run-time via `CONFIG_UBSAN_BOUNDS` (for array indexing) and `CONFIG_FORTIFY_SOURCE` (for strcpy/memcpy-family functions). This fixes multiple -Warray-bounds warnings: drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1069:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1070:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1071:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1072:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] While there, also make use of the struct_size() helper, and address checkpatch.pl warning: WARNING: please, no spaces at the start of a line This results in no differences in binary output. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZVZbX7C5suLMiBf+@work
2023-11-29nouveau/gsp/r535: remove a stray unlock in r535_gsp_rpc_send()Dan Carpenter
This unlock doesn't belong here and it leads to a double unlock in the caller, r535_gsp_rpc_push(). Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Timur Tabi <ttabi@nvidia.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/a0293812-c05d-45f0-a535-3f24fe582c02@moroto.mountain
2023-11-29nouveau: find the smallest page allocation to cover a buffer alloc.Dave Airlie
With the new uapi we don't have the comp flags on the allocation, so we shouldn't be using the first size that works, we should be iterating until we get the correct one. This reduces allocations from 2MB to 64k in lots of places. Fixes dEQP-VK.memory.allocation.basic.size_8KiB.forward.count_4000 on my ampere/gsp system. Cc: stable@vger.kernel.org # v6.6 Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230811031520.248341-1-airlied@gmail.com
2023-11-28drm/gpuvm: Fix deprecated license identifierThomas Hellström
"GPL-2.0-only" in the license header was incorrectly changed to the now deprecated "GPL-2.0". Fix. Cc: Maxime Ripard <mripard@kernel.org> Cc: Danilo Krummrich <dakr@redhat.com> Reported-by: David Edelsohn <dje.gcc@gmail.com> Closes: https://lore.kernel.org/dri-devel/5lfrhdpkwhpgzipgngojs3tyqfqbesifzu5nf4l5q3nhfdhcf2@25nmiq7tfrew/T/#m5c356d68815711eea30dd94cc6f7ea8cd4344fe3 Fixes: f7749a549b4f ("drm/gpuvm: Dual-licence the drm_gpuvm code GPL-2.0 OR MIT") Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231106114827.62492-1-thomas.hellstrom@linux.intel.com
2023-11-28Revert "drm/bridge: panel: Add a device link between drm device and panel ↵Linus Walleij
device" This reverts commit 199cf07ebd2b0d41185ac79b895547d45610b681. This patch creates bugs on devices where the DRM device is the ancestor of the panel devices. Attempts to fix this have failed because it leads to using device core functionality which is questionable. Reported-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.org
2023-11-28Revert "driver core: Export device_is_dependent() to modules"Linus Walleij
This reverts commit 1d5e8f4bf06da86b71cc9169110d1a0e1e7af337. Greg says: "why exactly is this needed? Nothing outside of the driver core should be needing this function, it shouldn't be public at all (I missed that before.) So please, revert it for now, let's figure out why DRM thinks this is needed for it's devices, and yet no other bus/subsystem does." Link: https://lore.kernel.org/dri-devel/2023112739-willing-sighing-6bdd@gregkh/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-1-69bb05048dae@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-1-69bb05048dae@linaro.org
2023-11-28Revert "drm/bridge: panel: Check device dependency before managing device link"Linus Walleij
This reverts commit 39d5b6a64ace77d0c11c398d272218df5f939abb. This patch was causing build errors by using an unexported function from the device core, which Greg questions the saneness in exporting. Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.org
2023-11-27dma-buf: fix check in dma_resv_add_fenceChristian König
It's valid to add the same fence multiple times to a dma-resv object and we shouldn't need one extra slot for each. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: a3f7c10a269d5 ("dma-buf/dma-resv: check if the new fence is really later") Cc: stable@vger.kernel.org # v5.19+ Link: https://patchwork.freedesktop.org/patch/msgid/20231115093035.1889-1-christian.koenig@amd.com
2023-11-27driver core: Export device_is_dependent() to modulesLiu Ying
Export device_is_dependent() since the drm_kms_helper module is starting to use it. Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231127051414.3783108-2-victor.liu@nxp.com
2023-11-25drm/bridge: panel: Check device dependency before managing device linkLiu Ying
Some panel devices already depend on DRM device, like the panel in arch/arm/boot/dts/st/ste-ux500-samsung-skomer.dts, because DRM device is the ancestor of those panel devices. device_link_add() would fail by returning a NULL pointer for those panel devices because of the existing dependency. So, check the dependency by calling device_is_dependent() before adding or deleting device link between panel device and DRM device so that the link is managed only for independent panel devices. Fixes: 887878014534 ("drm/bridge: panel: Fix device link for DRM_BRIDGE_ATTACH_NO_CONNECTOR") Fixes: 199cf07ebd2b ("drm/bridge: panel: Add a device link between drm device and panel device") Reported-by: Linus Walleij <linus.walleij@linaro.org> Closes: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231123032615.3760488-1-victor.liu@nxp.com
2023-11-21nouveau/gsp: allocate enough space for all channel ids.Dave Airlie
This probably isn't the ideal fix, but we ended up using chids sparsely, and lots of things rely on indexing into the full range, so just allocate the full range up front. The GSP code fixes 8 channels into a userd page, but we end up using a single userd page per channel so end up sparsely using the range. Fixes a few crashes seen with multiple channels. Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/277 Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121201109.2988516-1-airlied@gmail.com
2023-11-21drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBPCong Yang
The refresh reported by modetest is 60.46Hz, and the actual measurement is 60.01Hz, which is outside the expected tolerance. Adjust hporch and pixel clock to fix it. After repair, modetest and actual measurement were all 60.01Hz. Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime /DSI CLK. Assume that the DSI controller could not make the mode that we requested(presumably it's PLL couldn't generate the exact pixel clock?). If you use a different DSI controller, you may need to readjust these parameters. Now this panel looks like it's only used by me on the MTK platform, so let's change this set of parameters. Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com
2023-11-21drm/ast: Disconnect BMC if physical connector is connectedThomas Zimmermann
Many user-space compositors fail with mode setting if a CRTC has more than one connected connector. This is the case with the BMC on Aspeed systems. Work around this problem by setting the BMC's connector status to disconnected when the physical connector has a display attached. This way compositors will only see one connected connector at a time; either the physical one or the BMC. Suggested-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: e329cb53b45d ("drm/ast: Add BMC virtual connector") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> # v6.6+ Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116130217.22931-1-tzimmermann@suse.de
2023-11-21accel/ivpu/37xx: Fix hangs related to MMIO resetJacek Lawrynowicz
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET register. IP will be reset by FLR or by entering d0i3. Also IP reset during power_up is not needed as the VPU is already in reset. Removing MMIO reset improves stability as it a partial device reset that is not safe in some corner cases. This change also brings back ivpu_boot_pwr_domain_disable() that helps to properly power down VPU when it is hung by a buggy workload. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR") Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
2023-11-20drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP fullJonas Karlman
Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328 and RK3399 result in wrong colors being displayed. The issue can be observed using modetest: modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24 modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24 Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP full framework (IP version 3.x) compared to VOP little framework (2.x). Fix colors by applying different rb swap for VOP full framework (3.x) and VOP little framework (2.x) similar to vendor 4.4 kernel. Fixes: 85a359f25388 ("drm/rockchip: Add BGR formats to VOP") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: Diederik de Haas <didi.debian@cknow.org> Reviewed-by: Christopher Obbard <chris.obbard@collabora.com> Tested-by: Christopher Obbard <chris.obbard@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se
2023-11-19drm/panel: simple: Fix Innolux G101ICE-L01 timingsMarek Vasut
The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de
2023-11-19drm/panel: simple: Fix Innolux G101ICE-L01 bus flagsMarek Vasut
Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description, ones which match both the datasheet and the panel display_timing flags . Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de
2023-11-17drm/panel: auo,b101uan08.3: Fine tune the panel power sequenceXuxin Xiong
For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel") Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com
2023-11-15nouveau: don't fail driver load if no display hw present.Dave Airlie
If we get back ENODEV don't fail load. There are nvidia devices that don't have display blocks and the driver should work on those. Fixes: 15740541e8f0 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM") Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/270 Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231115143933.261287-1-airlied@gmail.com
2023-11-15drm: panel-orientation-quirks: Add quirk for Lenovo Legion GoBrenton Simpson
The Legion Go has a 2560x1600 portrait screen, with the native "up" facing the right controller (90° CW from the rest of the device). Signed-off-by: Brenton Simpson <appsforartists@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231114233859.274189-1-appsforartists@google.com
2023-11-15accel/ivpu: avoid build failure with CONFIG_PM=nArnd Bergmann
The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org (cherry picked from commit 1470acbef122c7e2e588f6346ce459c26d0568a2) Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2023-11-14nouveau: use an rwlock for the event lock.Dave Airlie
This allows it to break the following circular locking dependency. Aug 10 07:01:29 dg1test kernel: ====================================================== Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------ Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock: Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: but task is already holding lock: Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: which lock already depends on the new lock. Aug 10 07:01:29 dg1test kernel: the existing dependency chain (in reverse order) is: Aug 10 07:01:29 dg1test kernel: -> #3 (&event->list_lock#2){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: -> #2 (&device->intr.lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #1 (&event->refs_lock#4){....}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #0 (&fctx->lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: other info that might help us debug this: Aug 10 07:01:29 dg1test kernel: Chain exists of: &fctx->lock --> &device->intr.lock --> &event->list_lock#2 Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario: Aug 10 07:01:29 dg1test kernel: CPU0 CPU1 Aug 10 07:01:29 dg1test kernel: ---- ---- Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock); Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock); Aug 10 07:01:29 dg1test kernel: *** DEADLOCK *** Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236: Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: stack backtrace: Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10 Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 Aug 10 07:01:29 dg1test kernel: Call Trace: Aug 10 07:01:29 dg1test kernel: <TASK> Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90 Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110 Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700 Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc> Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206 Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0 Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950 Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001 Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490 Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280 Aug 10 07:01:29 dg1test kernel: </TASK> Signed-off-by: Dave Airlie <airlied@redhat.com> Tested-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107053255.2257079-1-airlied@gmail.com
2023-11-14nouveau/gsp/r535: Fix a NULL vs error pointer bugDan Carpenter
The r535_gsp_cmdq_get() function returns error pointers but this code checks for NULL. Also we need to propagate the error pointer back to the callers in r535_gsp_rpc_get(). Returning NULL will lead to a NULL pointer dereference. Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/f71996d9-d1cb-45ea-a4b2-2dfc21312d8c@kili.mountain
2023-11-14nouveau/gsp/r535: uninitialized variable in r535_gsp_acpi_mux_id()Dan Carpenter
The if we hit the "continue" statement on the first iteration through the loop then "handle_mux" needs to be set to NULL so we continue looping. Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1d864f6e-43e9-43d8-9d90-30e76c9c843b@moroto.mountain
2023-11-12wifi: iwlwifi: fix system commands group orderingMiri Korenblit
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by: Damian Tometzki <damian@riscv-rocks.de> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-11-12Merge tag 'parisc-for-6.7-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
2023-11-10Merge tag 'fbdev-for-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and cleanups from Helge Deller: - fix double free and resource leaks in imsttfb - lots of remove callback cleanups and section mismatch fixes in omapfb, amifb and atmel_lcdfb - error code fix and memparse simplification in omapfb * tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits) fbdev: fsl-diu-fb: mark wr_reg_wa() static fbdev: amifb: Convert to platform remove callback returning void fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning fbdev: hyperv_fb: fix uninitialized local variable use fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void fbdev: omapfb/tfp410: Convert to platform remove callback returning void fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void fbdev: omapfb/opa362: Convert to platform remove callback returning void fbdev: omapfb/hdmi: Convert to platform remove callback returning void fbdev: omapfb/dvi: Convert to platform remove callback returning void fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void fbdev: omapfb/dpi: Convert to platform remove callback returning void fbdev: omapfb/analog-tv: Convert to platform remove callback returning void fbdev: atmel_lcdfb: Convert to platform remove callback returning void fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs ...
2023-11-10Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Daniel Vetter: "Dave's VPN to the big machine died, so it's on me to do fixes pr this and next week while everyone else is at plumbers. - big pile of amd fixes, but mostly for hw support newly added in 6.7 - i915 fixes, mostly minor things - qxl memory leak fix - vc4 uaf fix in mock helpers - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE" * tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits) drm/amdgpu: fix error handling in amdgpu_vm_init drm/amdgpu: Fix possible null pointer dereference drm/amdgpu: move UVD and VCE sched entity init after sched init drm/amdgpu: move kfd_resume before the ip late init drm/amd: Explicitly check for GFXOFF to be enabled for s0ix drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2) drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5) drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support drm/amdgpu: fix software pci_unplug on some chips drm/amd/display: remove duplicated argument drm/amdgpu: correct mca debugfs dump reg list drm/amdgpu: correct acclerator check architecutre dump drm/amdgpu: add pcs xgmi v6.4.0 ras support drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3 drm/amdgpu: disable smu v13.0.6 mca debug mode by default drm/amdgpu: Support multiple error query modes drm/amdgpu: refine smu v13.0.6 mca dump driver drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2) drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV drm: amd: Resolve Sphinx unexpected indentation warning ...
2023-11-10Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken MediaTek firmware: - Move the MediaTek GIC quirk handling from irqchip to core. Before the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware issues") temporarily addressed this issue. Fixed now at a deeper level in the arch code - Reject events meant for other PMUs in the CoreSight PMU driver, otherwise some of the core PMU events would disappear - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers, causing some events to be invisible - Remove duplicate declaration of __arm64_sys##name following the patch to avoid prototype warning for syscalls - Typos in the elf_hwcap documentation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/syscall: Remove duplicate declaration Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW" arm64: Move MediaTek GIC quirk handling from irqchip to core arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers perf: arm_cspmu: Reject events meant for other PMUs Documentation/arm64: Fix typos in elf_hwcaps
2023-11-10Merge tag 'amd-drm-next-6.7-2023-11-10' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.7-2023-11-10: amdgpu: - SR-IOV fixes - DMCUB fixes - DCN3.5 fixes - DP2 fixes - SubVP fixes - SMU14 fixes - SDMA4.x fixes - Suspend/resume fixes - AGP regression fix - UAF fixes for some error cases - SMU 13.0.6 fixes - Documentation fixes - RAS fixes - Hotplug fixes - Scheduling entity ordering fix - GPUVM fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com
2023-11-10Merge tag 'spi-fix-v6.7-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of fixes that came in during the merge window: one Kconfig dependency fix and another fix for a long standing issue where a sync transfer races with system suspend" * tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Fix null dereference on suspend spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
2023-11-10Merge tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix broken cache-flush support for Micron eMMCs - Revert 'mmc: core: Capture correct oemid-bits for eMMC cards' MMC host: - sdhci_am654: Fix TAP value parsing for legacy speed mode - sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750 - vub300: Fix an error path in probe" * tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER Revert "mmc: core: Capture correct oemid-bits for eMMC cards" mmc: vub300: fix an error code mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A mmc: sdhci_am654: fix start loop index for TAP value parsing
2023-11-10Merge tag 'pwm/for-6.7-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "This contains two very small fixes that I failed to include in the main pull request" * tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix double shift bug pwm: samsung: Fix a bit test in pwm_samsung_resume()
2023-11-10Merge tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - nvme keyring config compile fixes (Hannes and Arnd) - fabrics keep alive fixes (Hannes) - tcp authentication fixes (Mark) - io_uring_cmd error handling fix (Anuj) - stale firmware attribute fix (Daniel) - tcp memory leak (Christophe) - crypto library usage simplification (Eric) - nbd use-after-free fix. May need a followup, but at least it's better than what it was before (Li) - Rate limit write on read-only device warnings (Yu) * tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux: nvme: keyring: fix conditional compilation nvme: common: make keyring and auth separate modules blk-core: use pr_warn_ratelimited() in bio_check_ro() nbd: fix uaf in nbd_open nvme: start keep-alive after admin queue setup nvme-loop: always quiesce and cancel commands before destroying admin q nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue() nvme-auth: always set valid seq_num in dhchap reply nvme-auth: add flag for bi-directional auth nvme-auth: auth success1 msg always includes resp nvme: fix error-handling for io_uring nvme-passthrough nvme: update firmware version after commit nvme-tcp: Fix a memory leak nvme-auth: use crypto_shash_tfm_digest()
2023-11-10Merge tag 'ata-6.7-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fixes from Damien Le Moal: - Revert a change in ata_pci_shutdown_one() to suspend disks on shutdown as this is now done using the manage_shutdown scsi device flag (me) - Change the pata_falcon and pata_gayle drivers to stop using module_platform_driver_probe(). This makes these drivers more inline with all other drivers (allowing bind/unbind) and suppress a compilation warning (Uwe) - Convert the pata_falcon and pata_gayle drivers to the new .remove_new() void-return callback. These 2 drivers are the last ones needing this change (Uwe) * tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_gayle: Convert to platform remove callback returning void ata: pata_falcon: Convert to platform remove callback returning void ata: pata_gayle: Stop using module_platform_driver_probe() ata: pata_falcon: Stop using module_platform_driver_probe() ata: libata-core: Fix ata_pci_shutdown_one()
2023-11-10Merge tag 'riscv-for-linus-6.7-mw2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for handling misaligned accesses in S-mode - Probing for misaligned access support is now properly cached and handled in parallel - PTDUMP now reflects the SW reserved bits, as well as the PBMT and NAPOT extensions - Performance improvements for TLB flushing - Support for many new relocations in the module loader - Various bug fixes and cleanups * tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) riscv: Optimize bitops with Zbb extension riscv: Rearrange hwcap.h and cpufeature.h drivers: perf: Do not broadcast to other cpus when starting a counter drivers: perf: Check find_first_bit() return value of: property: Add fw_devlink support for msi-parent RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings riscv: Don't use PGD entries for the linear mapping RISC-V: Probe misaligned access speed in parallel RISC-V: Remove __init on unaligned_emulation_finish() RISC-V: Show accurate per-hart isa in /proc/cpuinfo RISC-V: Don't rely on positional structure initialization riscv: Add tests for riscv module loading riscv: Add remaining module relocations riscv: Avoid unaligned access when relocating modules riscv: split cache ops out of dma-noncoherent.c riscv: Improve flush_tlb_kernel_range() riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb riscv: Improve flush_tlb_range() for hugetlb pages riscv: Improve tlb_flush() ...
2023-11-10Merge tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS updates from Thomas Bogendoerfer: - removed AR7 platform support - cleanups and fixes * tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: AR7: remove platform watchdog: ar7_wdt: remove driver to prepare for platform removal vlynq: remove bus driver mtd: parsers: ar7: remove support serial: 8250: remove AR7 support arch: mips: remove ReiserFS from defconfig MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h> MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning MIPS: KVM: Fix a build warning about variable set but not used MIPS: Remove dead code in relocate_new_kernel mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2 mips: dts: ralink: mt7621: define each reset as an item mips: dts: ingenic: Remove unneeded probe-type properties MIPS: loongson32: Remove dma.h and nand.h
2023-11-10drm/amdgpu: fix error handling in amdgpu_vm_initChristian König
When clearing the root PD fails we need to properly release it again. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-11-10drm/amdgpu: Fix possible null pointer dereferenceFelix Kuehling
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update. Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation") Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-11-10drm/amdgpu: move UVD and VCE sched entity init after sched initAlex Deucher
We need kernel scheduling entities to deal with handle clean up if apps are not cleaned up properly. With commit 56e449603f0ac5 ("drm/sched: Convert the GPU scheduler to variable number of run-queues") the scheduler entities have to be created after scheduler init, so change the ordering to fix this. v2: Leave logic in UVD and VCE code Fixes: 56e449603f0a ("drm/sched: Convert the GPU scheduler to variable number of run-queues") Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: ltuikov89@gmail.com
2023-11-10drm/amdgpu: move kfd_resume before the ip late initTim Huang
The kfd_resume needs to touch GC registers to enable the interrupts, it needs to be done before GFXOFF is enabled to ensure that the GFX is not off and GC registers can be touched. So move kfd_resume before the amdgpu_device_ip_late_init which enables the CGPG/GFXOFF. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-10drm/amd: Explicitly check for GFXOFF to be enabled for s0ixMario Limonciello
If a user has disabled GFXOFF this may cause problems for the suspend sequence. Ensure that it is enabled in amdgpu_acpi_is_s0ix_active(). The system won't reach the deepest state but it also won't hang. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-10Merge tag 'drm-misc-fixes-2023-11-08' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-fixes for v6.7-rc1: qxl: - qxl memory leak fix. syncobj: - Fix waiting for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE vc4: - Fix UAF in mock helpers Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [sima: Stitch together both changelogs from Maarten. Also because of branch history this contains a few more bugfixes which are already in v6.6, but I didn't feel like this justifies some backmerge since there wasn't any real conflict.] Link: https://patchwork.freedesktop.org/patch/msgid/bc8598ee-d427-4616-8ebd-64107ab9a2d8@linux.intel.com
2023-11-10Merge tag 'drm-intel-next-fixes-2023-11-08' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 fixes for v6.7-rc1: - Fix null dereference when perf interface is not available - Fix a -Wstringop-overflow warning - Fix a -Wformat-truncation warning in intel_tc_port_init - Flush WC GGTT only on required platforms - Fix MTL HBR3 rate support on C10 phy and eDP - Fix MTL notify_guc for multi-GT - Bump GLK CDCLK frequency when driving multiple pipes - Fix potential spectre vulnerability Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/878r78xrxd.fsf@intel.com
2023-11-10spi: Fix null dereference on suspendMark Hasemeyer
A race condition exists where a synchronous (noqueue) transfer can be active during a system suspend. This can cause a null pointer dereference exception to occur when the system resumes. Example order of events leading to the exception: 1. spi_sync() calls __spi_transfer_message_noqueue() which sets ctlr->cur_msg 2. Spi transfer begins via spi_transfer_one_message() 3. System is suspended interrupting the transfer context 4. System is resumed 6. spi_controller_resume() calls spi_start_queue() which resets cur_msg to NULL 7. Spi transfer context resumes and spi_finalize_current_message() is called which dereferences cur_msg (which is now NULL) Wait for synchronous transfers to complete before suspending by acquiring the bus mutex and setting/checking a suspend flag. Signed-off-by: Mark Hasemeyer <markhas@chromium.org> Link: https://lore.kernel.org/r/20231107144743.v1.1.I7987f05f61901f567f7661763646cb7d7919b528@changeid Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@kernel.org
2023-11-10pwm: samsung: Fix a bit test in pwm_samsung_resume()Dan Carpenter
The PWMF_REQUESTED enum is supposed to be used with test_bit() and not used as in a bitwise AND. In this specific code the flag will never be set so the function is effectively a no-op. Fixes: e3fe982b2e4e ("pwm: samsung: Put per-channel data into driver data") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-11 18:25:53 +0000