| Age | Commit message (Collapse) | Author |
|---|
|
Current math in cxl_region_perf_data_calculate divides the latency by 1000
every time the function gets called. This causes the region latency to be
divided by 1000 per memory device and the math is incorrect. This is user
visible as the latency access_coordinate exposed via sysfs will show
incorrect latency data.
Normalize values from CDAT to nanoseconds. Adjust sub-nanoseconds latency
to at least 1. Remove adjustment of perf numbers from the generic target
since hmat handling code has already normalized those numbers. Now all
computation and stored numbers should be in nanoseconds.
cxl_hb_get_perf_coordinates() is removed and HB coords are calculated
in the port access_coordinate calculation path since it no longer need
to be treated special.
Fixes: 3d9f4a197230 ("cxl/region: Calculate performance data for a region")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240403154844.3403859-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Current loop in cxl_endpoint_get_perf_coordinates() incorrectly assumes
the Root Port (RP) dport is the one with generic port access_coordinate.
However those coordinates are one level up in the Host Bridge (HB).
Current code causes the computation code to pick up 0s as the coordinates
and cause minimal bandwidth to result in 0.
Add check to skip RP when combining coordinates.
Fixes: 14a6960b3e92 ("cxl: Add helper function that calculate performance data for downstream ports")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240403154844.3403859-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add INTC107B for Lunar Lake and INTC10CB for Arrow Lake ACPI devices IDs.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Link: https://lore.kernel.org/r/20240405122630.32154-1-sumeet.r.pawnikar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If, for example, the power button is configured to suspend, holding it
and releasing it after the machine has suspended, will wake the machine.
Also on some machines, power button release events are sent during
hibernation, even if the button wasn't used to hibernate the machine.
This causes hibernation to be aborted.
Fixes: 0c4cae1bc00d ("PM: hibernate: Avoid missing wakeup events during hibernation")
Signed-off-by: David McFarland <corngood@gmail.com>
Tested-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/878r1tpd6u.fsf_-_@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The modes[] array contains pointers to modes on the connectors'
mode lists, which are protected by dev->mode_config.mutex.
Thus we need to extend modes[] the same protection or by the
time we use it the elements may already be pointing to
freed/reused memory.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10583
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404203336.10454-2-ville.syrjala@linux.intel.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
GPIO_S0_SC57 / GPIO_S0_SC61 can be muxed to PCU_UART_TXD / PCU_UART_RXD,
add a pinconf group for this.
On Bay Trail board schematics using these pins as UART these are
called UART3_TXD / UART3_RXD, name the pinconf group "uart3_grp"
to be consistent with the schematics.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
For all the "score" pin-groups all the intel_pingroup-s to select
the non GPIO function are re-used for byt_score_gpio_groups[].
But this is incorrect since a pin-group includes the mode setting,
which for the non GPIO functions generally is 1, where as to select
the GPIO function mode must be set to 0.
So the GPIO function needs separate intel_pingroup-s with their own mode
value of 0.
Add a new PIN_GROUP_GPIO macro which adds a foo_gpio entry to each
pin-group defined this way and update byt_score_gpio_groups[] to point
to the new foo_gpio entries.
The "sus" usb_oc_grp usb_ulpi_grp and pcu_spi_grp pin-groups are special
because these have a non 0 mode value to select the GPIO functions and
these already have matching foo_gpio pin-groups, leave these are unchanged.
The pmu_clk "sus" groups added in commit 2f46d7f7e959 ("pinctrl: baytrail:
Add pinconf group + function for the pmu_clk") do need to use the new
PIN_GROUP_GPIO macro.
Fixes: 2f46d7f7e959 ("pinctrl: baytrail: Add pinconf group + function for the pmu_clk")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The host1x devices are virtual compound devices and do not perform DMA
accesses themselves, so they do not need to be set up for DMA.
Ideally we would also not need to set up DMA masks for the virtual
devices, but we currently still need those for legacy support on old
hardware.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314154943.2487549-1-thierry.reding@gmail.com
|
|
On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends
on 3 other devices:
Name (_DEP, Package (0x03) // _DEP: Dependencies
{
I2C1,
GPO2,
GPO0
})
acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then
before an acpi_device is created for the BATC handle (and thus before
acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both
GPIO depenencies, with free_when_met not set for the dependencies.
Since there is no adev for BATC yet, there also is no dep_unmet to
decrement. The only result of acpi_scan_clear_dep() in this case is
dep->met getting set.
Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies
the acpi_device gets created for the BATC handle and acpi_scan_dep_init()
runs, this sees 3 dependencies on the acpi_dep_list and initializes
unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep
becomes 2, but since the 2 GPIO deps where already met it never becomes 0
causing battery monitoring to not work.
Fix this by modifying acpi_scan_dep_init() to not increase dep_met for
dependencies which have already been marked as being met.
Fixes: 3ba12d8de3fa ("ACPI: scan: Reduce overhead related to devices with dependencies")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The missing statistics including Rx_Receive_Error_Packets and
Tx_OSize_Packets_Good.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
XGMAC MMC has already added LPI statistics. GMAC MMC lack of these
statistics. Add register definition and reading the LPI statistics
from registers.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a regmap_read_bypassed() to allow reads from the hardware registers
while the regmap is in cache-only mode.
A typical use for this is to keep the cache in cache-only mode until
the hardware has reached a valid state, but one or more status registers
must be polled to determine when this state is reached.
For example, firmware download on the cs35l56 can take several seconds if
there are multiple amps sharing limited bus bandwidth. This is too long
to block in probe() so it is done as a background task. The device must
be soft-reset to reboot the firmware and during this time the registers are
not accessible, so the cache should be in cache-only. But the driver must
poll a register to detect when reboot has completed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240408101803.43183-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The regulator IRQ helper requires caller to provide pointer to IRQ name
which is kept in memory by caller. All other data passed to the helper
in the regulator_irq_desc structure is copied. This can cause some
confusion and unnecessary complexity.
Make the regulator_irq_helper() to copy also the provided IRQ name
information so caller can discard the name after the call to
regulator_irq_helper() completes.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://msgid.link/r/ZhJMuUYwaZbBXFGP@drtxq0yyyyyyyyyyyyydy-3.rev.dnainternet.fi
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is possible that during error recovery and firmware reset,
there is a pending TX PTP packet waiting for the timestamp.
We need to reset this condition so that after recovery, the
tx_avail count for PTP is reset back to the initial value.
Otherwise, we may not accept any PTP TX timestamps after
recovery.
Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since runtime MSIXs vector allocation/free has been removed,
the L2 driver needs to repopulate the MSIX entries for the
ulp client as the irq table may change during the recovery
process.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If ulp = kzalloc() fails, the allocated edev will leak because it is
not properly assigned and the cleanup path will not be able to free it.
Fix it by assigning it properly immediately after allocation.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Acer Predator PH18-71 to acer_quirks with predator_v4
to support mode button and fan speed sensor.
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240329152800.29393-1-bero@baylibre.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/
Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot is able to trigger an uninit-value in geneve_xmit() [1]
Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb->protocol.
If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol,
pskb_inet_may_pull() does nothing at all.
If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.
Add skb_vlan_inet_prepare() to perform a complete mac validation.
Use this in geneve for the moment, I suspect we need to adopt this
more broadly.
v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
- Only call __vlan_get_protocol() for vlan types.
Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/
v2,v3 - Addressed Sabrina comments on v1 and v2
Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/
[1]
BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
geneve_xmit_skb drivers/net/geneve.c:910 [inline]
geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
__dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb")
Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set the correct port when querying PPCNT in multi-port configuration.
Distinguish between cases where switchdev mode was enabled to multi-port
configuration and don't overwrite the queried port to 1 in multi-port
case.
Fixes: 74b30b3ad5ce ("RDMA/mlx5: Set local port to one when accessing counters")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/9bfcc8ade958b760a51408c3ad654a01b11f7d76.1712134988.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ivpu_device->context_xa is locked both in kernel thread and IRQ context.
It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization
otherwise the lock could be acquired from a thread and interrupted by
an IRQ that locks it for the second time causing the deadlock.
This deadlock was reported by lockdep and observed in internal tests.
Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-9-jacek.lawrynowicz@linux.intel.com
|
|
Change "VPU" to "NPU" in ivpu_suspend() so it matches all other error
messages.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-8-jacek.lawrynowicz@linux.intel.com
|
|
DRM_IVPU_PARAM_CORE_CLOCK_RATE returns current NPU frequency which
could be 0 if device was sleeping. This value isn't really useful to
the user space, so return max freq instead which can be used to estimate
NPU performance.
Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up")
Cc: <stable@vger.kernel.org> # v6.7
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-7-jacek.lawrynowicz@linux.intel.com
|
|
This patch improves readability and clarity of MMU error messages.
Previously, the error strings were somewhat confusing and could lead to
ambiguous interpretations, making it difficult to diagnose issues.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-6-jacek.lawrynowicz@linux.intel.com
|
|
Put NPU in D3hot after ivpu_resume() fails to power up the device.
This will assure that D3->D0 power cycle will be performed before
the next resume and also will minimize power usage in this corner case.
Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-5-jacek.lawrynowicz@linux.intel.com
|
|
In case of failed power up we end up left in PCI D3hot
state making it impossible to access NPU registers on retry.
Enter D0 state on retry before proceeding with power up sequence.
Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-4-jacek.lawrynowicz@linux.intel.com
|
|
Always enter D3hot after entering D0i3 an all platforms.
This minimizes power usage.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-3-jacek.lawrynowicz@linux.intel.com
|
|
Return value of drmm_mutex_init(ipc->lock) was unchecked.
Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-2-jacek.lawrynowicz@linux.intel.com
|
|
Guest moved avail idx not used idx when we need to print log if
'(vq->avail_idx - last_avail_idx) > vq->num', so fix it.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20240311082109.46773-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Modules registering driver with register_virtio_driver() might forget to
set .owner field. i2c-virtio.c for example has it missing. The field
is used by some other kernel parts for reference counting
(try_module_get()), so it is expected that drivers will set it.
Solve the problem by moving this task away from the drivers to the core
virtio code, just like we did for platform_driver in
commit 9447057eaff8 ("platform_device: use a macro instead of
platform_driver_register").
Fixes: 3cfc88380413 ("i2c: virtio: add a virtio i2c frontend driver")
Cc: "Jie Deng" <jie.deng@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-1-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
A smp_rmb() has been missed in vhost_enable_notify(), inspired by
Will. Otherwise, it's not ensured the available ring entries pushed
by guest can be observed by vhost in time, leading to stale available
ring entries fetched by vhost in vhost_get_vq_desc(), as reported by
Yihuang Yu on NVidia's grace-hopper (ARM64) platform.
/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
-accel kvm -machine virt,gic-version=host -cpu host \
-smp maxcpus=1,cpus=1,sockets=1,clusters=1,cores=1,threads=1 \
-m 4096M,slots=16,maxmem=64G \
-object memory-backend-ram,id=mem0,size=4096M \
: \
-netdev tap,id=vnet0,vhost=true \
-device virtio-net-pci,bus=pcie.8,netdev=vnet0,mac=52:54:00:f1:26:b0
:
guest# netperf -H 10.26.1.81 -l 60 -C -c -t UDP_STREAM
virtio_net virtio0: output.0:id 100 is not a head!
Add the missed smp_rmb() in vhost_enable_notify(). When it returns true,
it means there's still pending tx buffers. Since it might read indices,
so it still can bypass the smp_rmb() in vhost_get_vq_desc(). Note that
it should be safe until vq->avail_idx is changed by commit d3bb267bbdcb
("vhost: cache avail index in vhost_enable_notify()").
Fixes: d3bb267bbdcb ("vhost: cache avail index in vhost_enable_notify()")
Cc: <stable@kernel.org> # v5.18+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240328002149.1141302-3-gshan@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
A smp_rmb() has been missed in vhost_vq_avail_empty(), spotted by
Will. Otherwise, it's not ensured the available ring entries pushed
by guest can be observed by vhost in time, leading to stale available
ring entries fetched by vhost in vhost_get_vq_desc(), as reported by
Yihuang Yu on NVidia's grace-hopper (ARM64) platform.
/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
-accel kvm -machine virt,gic-version=host -cpu host \
-smp maxcpus=1,cpus=1,sockets=1,clusters=1,cores=1,threads=1 \
-m 4096M,slots=16,maxmem=64G \
-object memory-backend-ram,id=mem0,size=4096M \
: \
-netdev tap,id=vnet0,vhost=true \
-device virtio-net-pci,bus=pcie.8,netdev=vnet0,mac=52:54:00:f1:26:b0
:
guest# netperf -H 10.26.1.81 -l 60 -C -c -t UDP_STREAM
virtio_net virtio0: output.0:id 100 is not a head!
Add the missed smp_rmb() in vhost_vq_avail_empty(). When tx_can_batch()
returns true, it means there's still pending tx buffers. Since it might
read indices, so it still can bypass the smp_rmb() in vhost_get_vq_desc().
Note that it should be safe until vq->avail_idx is changed by commit
275bf960ac697 ("vhost: better detection of available buffers").
Fixes: 275bf960ac69 ("vhost: better detection of available buffers")
Cc: <stable@kernel.org> # v4.11+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240328002149.1141302-2-gshan@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio for v6.9-1
* Fix returned code in the error path in Intel PMIC GPIO drivers
The following is an automated git shortlog grouped by driver:
crystalcove:
- Use -ENOTSUPP consistently
wcove:
- Use -ENOTSUPP consistently
|
|
Similar to the previous commit, we should make sure that all devices are
runtime resumed before printing the clk_summary through debugfs. Failure
to do so would result in a deadlock if the thread is resuming a device
to print clk state and that device is also runtime resuming in another
thread, e.g the screen is turning on and the display driver is starting
up. We remove the calls to clk_pm_runtime_{get,put}() in this path
because they're superfluous now that we know the devices are runtime
resumed. This also squashes a bug where the return value of
clk_pm_runtime_get() wasn't checked, leading to an RPM count underflow
on error paths.
Fixes: 1bb294a7981c ("clk: Enable/Disable runtime PM for clk_summary")
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-6-sboyd@kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
|
|
Doug reported [1] the following hung task:
INFO: task swapper/0:1 blocked for more than 122 seconds.
Not tainted 5.15.149-21875-gf795ebc40eb8 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008
Call trace:
__switch_to+0xf4/0x1f4
__schedule+0x418/0xb80
schedule+0x5c/0x10c
rpm_resume+0xe0/0x52c
rpm_resume+0x178/0x52c
__pm_runtime_resume+0x58/0x98
clk_pm_runtime_get+0x30/0xb0
clk_disable_unused_subtree+0x58/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused+0x4c/0xe4
do_one_initcall+0xcc/0x2d8
do_initcall_level+0xa4/0x148
do_initcalls+0x5c/0x9c
do_basic_setup+0x24/0x30
kernel_init_freeable+0xec/0x164
kernel_init+0x28/0x120
ret_from_fork+0x10/0x20
INFO: task kworker/u16:0:9 blocked for more than 122 seconds.
Not tainted 5.15.149-21875-gf795ebc40eb8 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__switch_to+0xf4/0x1f4
__schedule+0x418/0xb80
schedule+0x5c/0x10c
schedule_preempt_disabled+0x2c/0x48
__mutex_lock+0x238/0x488
__mutex_lock_slowpath+0x1c/0x28
mutex_lock+0x50/0x74
clk_prepare_lock+0x7c/0x9c
clk_core_prepare_lock+0x20/0x44
clk_prepare+0x24/0x30
clk_bulk_prepare+0x40/0xb0
mdss_runtime_resume+0x54/0x1c8
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x68/0x7c
genpd_runtime_resume+0x108/0x1f4
__rpm_callback+0x84/0x144
rpm_callback+0x30/0x88
rpm_resume+0x1f4/0x52c
rpm_resume+0x178/0x52c
__pm_runtime_resume+0x58/0x98
__device_attach+0xe0/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x3c/0x9c
device_add+0x644/0x814
mipi_dsi_device_register_full+0xe4/0x170
devm_mipi_dsi_device_register_full+0x28/0x70
ti_sn_bridge_probe+0x1dc/0x2c0
auxiliary_bus_probe+0x4c/0x94
really_probe+0xcc/0x2c8
__driver_probe_device+0xa8/0x130
driver_probe_device+0x48/0x110
__device_attach_driver+0xa4/0xcc
bus_for_each_drv+0x8c/0xd8
__device_attach+0xf8/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x3c/0x9c
deferred_probe_work_func+0x9c/0xd8
process_one_work+0x148/0x518
worker_thread+0x138/0x350
kthread+0x138/0x1e0
ret_from_fork+0x10/0x20
The first thread is walking the clk tree and calling
clk_pm_runtime_get() to power on devices required to read the clk
hardware via struct clk_ops::is_enabled(). This thread holds the clk
prepare_lock, and is trying to runtime PM resume a device, when it finds
that the device is in the process of resuming so the thread schedule()s
away waiting for the device to finish resuming before continuing. The
second thread is runtime PM resuming the same device, but the runtime
resume callback is calling clk_prepare(), trying to grab the
prepare_lock waiting on the first thread.
This is a classic ABBA deadlock. To properly fix the deadlock, we must
never runtime PM resume or suspend a device with the clk prepare_lock
held. Actually doing that is near impossible today because the global
prepare_lock would have to be dropped in the middle of the tree, the
device runtime PM resumed/suspended, and then the prepare_lock grabbed
again to ensure consistency of the clk tree topology. If anything
changes with the clk tree in the meantime, we've lost and will need to
start the operation all over again.
Luckily, most of the time we're simply incrementing or decrementing the
runtime PM count on an active device, so we don't have the chance to
schedule away with the prepare_lock held. Let's fix this immediate
problem that can be triggered more easily by simply booting on Qualcomm
sc7180.
Introduce a list of clk_core structures that have been registered, or
are in the process of being registered, that require runtime PM to
operate. Iterate this list and call clk_pm_runtime_get() on each of them
without holding the prepare_lock during clk_disable_unused(). This way
we can be certain that the runtime PM state of the devices will be
active and resumed so we can't schedule away while walking the clk tree
with the prepare_lock held. Similarly, call clk_pm_runtime_put() without
the prepare_lock held to properly drop the runtime PM reference. We
remove the calls to clk_pm_runtime_{get,put}() in this path because
they're superfluous now that we know the devices are runtime resumed.
Reported-by: Douglas Anderson <dianders@chromium.org>
Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1]
Closes: https://issuetracker.google.com/328070191
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
|
|
Initialize this kref once we allocate memory for the struct clk_core so
that we can reuse the release function to free any memory associated
with the structure. This mostly consolidates code, but also clarifies
that the kref lifetime exists once the container structure (struct
clk_core) is allocated instead of leaving it in a half-baked state for
most of __clk_core_init().
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-4-sboyd@kernel.org
|
|
We don't need to hold the prepare_lock when dropping a ref on a struct
clk_core. The release function is only freeing memory and any code with
a pointer reference has already unlinked anything pointing to the
clk_core. This reduces the holding area of the prepare_lock a bit.
Note that we also don't call free_clk() with the prepare_lock held.
There isn't any reason to do that.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-3-sboyd@kernel.org
|
|
Removing this assertion lets us move the kref_put() call outside the
prepare_lock section. We don't need to hold the prepare_lock here to
free memory and destroy the clk_core structure. We've already unlinked
the clk from the clk tree and by the time the release function runs
nothing holds a reference to the clk_core anymore so anything with the
pointer can't access the memory that's being freed anyway. Way back in
commit 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of
prepare_lock") we didn't need to have this assertion either.
Fixes: 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of prepare_lock")
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-2-sboyd@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
|
|
Inorder to support shaping and scheduling, Upon class creation
Netdev driver allocates trasmit schedulers.
The previous patch which added support for Round robin scheduling has
a bug due to which driver is not freeing transmit schedulers post
class deletion.
This patch fixes the same.
Fixes: 47a9656f168a ("octeontx2-pf: htb offload support for Round Robin scheduling")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a bug when setting the RSS options in virtio_net that can break
the whole machine, getting the kernel into an infinite loop.
Running the following command in any QEMU virtual machine with virtionet
will reproduce this problem:
# ethtool -X eth0 hfunc toeplitz
This is how the problem happens:
1) ethtool_set_rxfh() calls virtnet_set_rxfh()
2) virtnet_set_rxfh() calls virtnet_commit_rss_command()
3) virtnet_commit_rss_command() populates 4 entries for the rss
scatter-gather
4) Since the command above does not have a key, then the last
scatter-gatter entry will be zeroed, since rss_key_size == 0.
sg_buf_size = vi->rss_key_size;
5) This buffer is passed to qemu, but qemu is not happy with a buffer
with zero length, and do the following in virtqueue_map_desc() (QEMU
function):
if (!sz) {
virtio_error(vdev, "virtio: zero sized buffers are not allowed");
6) virtio_error() (also QEMU function) set the device as broken
vdev->broken = true;
7) Qemu bails out, and do not repond this crazy kernel.
8) The kernel is waiting for the response to come back (function
virtnet_send_command())
9) The kernel is waiting doing the following :
while (!virtqueue_get_buf(vi->cvq, &tmp) &&
!virtqueue_is_broken(vi->cvq))
cpu_relax();
10) None of the following functions above is true, thus, the kernel
loops here forever. Keeping in mind that virtqueue_is_broken() does
not look at the qemu `vdev->broken`, so, it never realizes that the
vitio is broken at QEMU side.
Fix it by not sending RSS commands if the feature is not available in
the device.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Cc: stable@vger.kernel.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During the removal of the idxd driver, registered offline callback is
invoked as part of the clean up process. However, on systems with only
one CPU online, no valid target is available to migrate the
perf context, resulting in a kernel oops:
BUG: unable to handle page fault for address: 000000000002a2b8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 1470e1067 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57
Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023
RIP: 0010:mutex_lock+0x2e/0x50
...
Call Trace:
<TASK>
__die+0x24/0x70
page_fault_oops+0x82/0x160
do_user_addr_fault+0x65/0x6b0
__pfx___rdmsr_safe_on_cpu+0x10/0x10
exc_page_fault+0x7d/0x170
asm_exc_page_fault+0x26/0x30
mutex_lock+0x2e/0x50
mutex_lock+0x1e/0x50
perf_pmu_migrate_context+0x87/0x1f0
perf_event_cpu_offline+0x76/0x90 [idxd]
cpuhp_invoke_callback+0xa2/0x4f0
__pfx_perf_event_cpu_offline+0x10/0x10 [idxd]
cpuhp_thread_fun+0x98/0x150
smpboot_thread_fn+0x27/0x260
smpboot_thread_fn+0x1af/0x260
__pfx_smpboot_thread_fn+0x10/0x10
kthread+0x103/0x140
__pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
__pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
<TASK>
Fix the issue by preventing the migration of the perf context to an
invalid target.
Fixes: 81dd4d4d6178 ("dmaengine: idxd: Add IDXD performance monitor support")
Reported-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240313214031.1658045-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clarify the kernel doc of xdma_fill_descs(), especially how big chunks
will be handled.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/stable/20240327-digigram-xdma-fixes-v1-3-45f4a52c0283%40bootlin.com
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-3-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The current xdma_synchronize method does not properly wait for the last
transfer to be done. Due to limitations of the XMDA engine, it is not
possible to stop a transfer in the middle of a descriptor. Said
otherwise, if a stop is requested at the end of descriptor "N" and the OS
is fast enough, the DMA controller will effectively stop immediately.
However, if the OS is slightly too slow to request the stop and the DMA
engine starts descriptor "N+1", the N+1 transfer will be performed until
its end. This means that after a terminate_all, the last descriptor must
remain valid and the synchronization must wait for this last descriptor to
be terminated.
Fixes: 855c2e1d1842 ("dmaengine: xilinx: xdma: Rework xdma_terminate_all()")
Fixes: f5c392d106e7 ("dmaengine: xilinx: xdma: Add terminate_all/synchronize callbacks")
Cc: stable@vger.kernel.org
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-2-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
descriptor
The addition of interleaved transfers slightly changed the way
addresses inside DMA descriptors are derived, breaking cyclic
transfers.
Fixes: 3e184e64c2e5 ("dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-1-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are several places where either chan->lock or chan->vchan.lock was
not held. Add appropriate locking. This fixes lockdep warnings like
[ 31.077578] ------------[ cut here ]------------
[ 31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0
[ 31.077953] Modules linked in:
[ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ #98
[ 31.078102] Hardware name: xlnx,zynqmp (DT)
[ 31.078169] Workqueue: events_unbound deferred_probe_work_func
[ 31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0
[ 31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0
[ 31.078550] sp : ffffffc083bb2e10
[ 31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168
[ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480
[ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000
[ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000
[ 31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001
[ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def
[ 31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516
[ 31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff
[ 31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000
[ 31.080307] Call trace:
[ 31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0
[ 31.080518] xilinx_dpdma_issue_pending+0x11c/0x120
[ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac
[ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c
[ 31.080825] drm_atomic_helper_commit_planes+0x20c/0x684
[ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0
[ 31.081139] commit_tail+0x234/0x294
[ 31.081246] drm_atomic_helper_commit+0x1f8/0x210
[ 31.081363] drm_atomic_commit+0x100/0x140
[ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384
[ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c
[ 31.081725] drm_client_modeset_commit+0x34/0x5c
[ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168
[ 31.081899] drm_fb_helper_set_par+0x50/0x70
[ 31.081971] fbcon_init+0x538/0xc48
[ 31.082047] visual_init+0x16c/0x23c
[ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634
[ 31.082320] do_take_over_console+0x24c/0x33c
[ 31.082429] do_fbcon_takeover+0xbc/0x1b0
[ 31.082503] fbcon_fb_registered+0x2d0/0x34c
[ 31.082663] register_framebuffer+0x27c/0x38c
[ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c
[ 31.082939] drm_fb_helper_initial_config+0x50/0x74
[ 31.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108
[ 31.083115] drm_client_register+0xa0/0xf4
[ 31.083195] drm_fbdev_dma_setup+0xb0/0x1cc
[ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0
[ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0
[ 31.083616] platform_probe+0x8c/0x13c
[ 31.083713] really_probe+0x258/0x59c
[ 31.083793] __driver_probe_device+0xc4/0x224
[ 31.083878] driver_probe_device+0x70/0x1c0
[ 31.083961] __device_attach_driver+0x108/0x1e0
[ 31.084052] bus_for_each_drv+0x9c/0x100
[ 31.084125] __device_attach+0x100/0x298
[ 31.084207] device_initial_probe+0x14/0x20
[ 31.084292] bus_probe_device+0xd8/0xdc
[ 31.084368] deferred_probe_work_func+0x11c/0x180
[ 31.084451] process_one_work+0x3ac/0x988
[ 31.084643] worker_thread+0x398/0x694
[ 31.084752] kthread+0x1bc/0x1c0
[ 31.084848] ret_from_fork+0x10/0x20
[ 31.084932] irq event stamp: 64549
[ 31.084970] hardirqs last enabled at (64548): [<ffffffc081adf35c>] _raw_spin_unlock_irqrestore+0x80/0x90
[ 31.085157] hardirqs last disabled at (64549): [<ffffffc081adf010>] _raw_spin_lock_irqsave+0xc0/0xdc
[ 31.085277] softirqs last enabled at (64503): [<ffffffc08001071c>] __do_softirq+0x47c/0x500
[ 31.085390] softirqs last disabled at (64498): [<ffffffc080017134>] ____do_softirq+0x10/0x1c
[ 31.085501] ---[ end trace 0000000000000000 ]---
Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20240308210034.3634938-2-sean.anderson@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
drain_workqueue() cannot be called safely in a spinlocked context due to
possible task rescheduling. In the multi-task scenario, calling
queue_work() while drain_workqueue() will lead to a Call Trace as
pushing a work on a draining workqueue is not permitted in spinlocked
context.
Call Trace:
<TASK>
? __warn+0x7d/0x140
? __queue_work+0x2b2/0x440
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? __queue_work+0x2b2/0x440
queue_work_on+0x28/0x30
idxd_misc_thread+0x303/0x5a0 [idxd]
? __schedule+0x369/0xb40
? __pfx_irq_thread_fn+0x10/0x10
? irq_thread+0xbc/0x1b0
irq_thread_fn+0x21/0x70
irq_thread+0x102/0x1b0
? preempt_count_add+0x74/0xa0
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
kthread+0x103/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The current implementation uses a spinlock to protect event log workqueue
and will lead to the Call Trace due to potential task rescheduling.
To address the locking issue, convert the spinlock to mutex, allowing
the drain_workqueue() to be called in a safe mutex-locked context.
This change ensures proper synchronization when accessing the event log
workqueue, preventing potential Call Trace and improving the overall
robustness of the code.
Fixes: c40bd7d9737b ("dmaengine: idxd: process user page faults for completion record")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20240404223949.2885604-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
According to the 'qcom,ipq5332-usb-hsphy.yaml' schema, the 5V
supply regulator must be defined via the 'vdd-supply' property.
The driver however requests for the 'vdda-phy' regulator which
results in the following message when the driver is probed on
a IPQ5018 based board with a device tree matching to the schema:
qcom-m31usb-phy 5b000.phy: supply vdda-phy not found, using dummy regulator
qcom-m31usb-phy 5b000.phy: Registered M31 USB phy
This means that the regulator specified in the device tree never
gets enabled.
Change the driver to use the 'vdd' name for the regulator as per
defined in the schema in order to ensure that the corresponding
regulator gets enabled.
Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver")
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240406-phy-qcom-m31-regulator-fix-v2-1-c8e9795bc071@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A host driver build fix"
* tag 'i2c-for-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pxa: hide unused icr_bits[] variable
|
|
Fix sync mode setting by applying the necessary shift bits.
Fixes: fff7352bf7a3 ("iio: imu: Add support for adis16475")
Signed-off-by: Ramona Gradinariu <ramona.bolboaca13@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240405045309.816328-2-ramona.bolboaca13@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
