summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-12-08usb: misc: rio500: fix result type for error messageKim Jae Joong
Fix variable type for dev_err about usb_bulk_msg() Signed-off-by: Kim Jae Joong <climbbb.kim@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-08net: stmmac: stmmac_platform: use correct setup function for gmac4Niklas Cassel
devicetree binding for stmmac states: - compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" For backwards compatibility: "st,spear600-gmac" is also supported. Previously, when specifying "snps,dwmac-4.10a", "snps,dwmac" as your compatible string, plat_stmmacenet_data would have both has_gmac and has_gmac4 set. This would lead to stmmac_hw_init calling dwmac1000_setup rather than dwmac4_setup, resulting in a non-functional driver. This happened since the check for has_gmac is done before the check for has_gmac4. However, the order should not matter, so it does not make sense to have both set. If something is valid for both, you should do as the stmmac_interrupt does: if (priv->plat->has_gmac || priv->plat->has_gmac4) ... The places where it was obvious that the author actually meant if (has_gmac || has_gmac4) rather than if (has_gmac) has been updated. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: stmmac: dwmac-generic: add missing compatible stringsNiklas Cassel
devicetree binding for stmmac states: - compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" For backwards compatibility: "st,spear600-gmac" is also supported. Since dwmac-generic.c calls stmmac_probe_config_dt explicitly, another alternative would have been to remove all compatible strings other than "snps,dwmac" and "st,spear600-gmac" from dwmac-generic.c. However, that would probably do more good than harm, since when trying to figure out what hardware a certain driver supports, you usually look at the compatible strings in the struct of_device_id, and not in some function defined in a completely different file. No functional change intended. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: ll_temac: Utilize of_get_mac_address()Tobias Klauser
Do not open code getting the MAC address exclusively from the "local-mac-address" property, but instead use of_get_mac_address() which looks up the MAC address using the 3 typical property names. Also avoid casting away the const qualifier of the return value by making temac_init_mac_address() take a const void* address. Follows commit b34296a9c047 ("net: ethoc: Utilize of_get_mac_address()"). Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: axienet: Utilize of_get_mac_address()Tobias Klauser
Do not open code getting the MAC address exclusively from the "local-mac-address" property, but instead use of_get_mac_address() which looks up the MAC address using the 3 typical property names. Also avoid casting away the const qualifier of the return value by making axienet_set_mac_address() take a const void* address. Follows commit b34296a9c047 ("net: ethoc: Utilize of_get_mac_address()"). Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net/mlx5e: Offload TC matching on packets being IP fragmentsOr Gerlitz
Enable offloading of matching on packets being fragments. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: mvneta: Indent some statementsDan Carpenter
These two statements were not indented correctly so it's sort of confusing. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08drivers: net: xgene: uninitialized variable in xgene_enet_free_pagepool()Dan Carpenter
We never set "slots" in this function. Fixes: a9380b0f7be8 ("drivers: net: xgene: Add support for Jumbo frame") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08vhost: remove unnecessary smp_mb from vhost_work_queuePeng Tao
test_and_set_bit() already implies a memory barrier. Signed-off-by: Peng Tao <bergwolf@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08vhost-vsock: remove unused vq variablePeng Tao
Signed-off-by: Peng Tao <bergwolf@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08spi: Add support for Armada 3700 SPI ControllerRomain Perier
Marvell Armada 3700 SoC comprises an SPI Controller. This Controller supports up to 4 SPI slave devices, with dedicated chip selects,supports SPI mode 0/1/2 and 3, CPIO or Fifo mode with DMA transfers and different SPI transfer mode (Single, Dual or Quad). This commit adds basic driver support for FIFO mode. In this mode, dedicated registers are used to store the instruction, the address, the read mode and the data. Write and Read FIFO are used to store the outcoming or incoming data. The data FIFOs are accessible via DMA or by the CPU. Only the CPU is supported for now. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-08rpmsg: qcom_smd: Correct return value for O_NONBLOCKBjorn Andersson
qcom_smd_send() should return -EAGAIN for non-blocking channels with insufficient space, so that we can propagate this event to user space. Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-12-08can: peak: fix bad memory access and free sequence추지호
Fix for bad memory access while disconnecting. netdev is freed before private data free, and dev is accessed after freeing netdev. This makes a slub problem, and it raise kernel oops with slub debugger config. Signed-off-by: Jiho Chu <jiho.chu@samsung.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-08mmc: sdhci-cadence: add Cadence SD4HC supportMasahiro Yamada
Add a driver for the Cadence SD4HC SD/SDIO/eMMC Controller. For SD, it basically relies on the SDHCI standard code. For eMMC, this driver provides some callbacks to support the hardware part that is specific to this IP design. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-08mmc: sdhci: export sdhci_execute_tuning()Masahiro Yamada
Some SDHCI-compat controllers support not only SD, but also eMMC, but they use different commands for tuning: CMD19 for SD, CMD21 for eMMC. Due to the difference of the underlying mechanism, some controllers (at least, the Cadence IP is the case) provide their own registers for the eMMC tuning. This commit will be useful when we want to override .execute_tuning callback (for eMMC HS200 tuning), but still let it fall back to sdhci_execute_tuning() for SD timing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-12-08drm/omap: tpd12s015: fix error handlingTomi Valkeinen
tpd12s015 driver is missing error value handling for gpio initialization, causing 0 to be returned as an error if gpiod_get_* fails. This may cause deferred probing to fail. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-12-08drm/omap: fix primary-plane's possible_crtcsTomi Valkeinen
We set the possible_crtc for all planes to "(1 << priv->num_crtcs) - 1", which is fine as the HW planes can be used fro all crtcs. However, when we're doing that, we are still incrementing 'num_crtcs', and we'll end up with bad possible_crtcs, preventing the use of the primary planes. This patch passes a possible_crtcs mask to plane init function so that we get correct possible_crtc. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-12-08drm: fix possible_crtc's typeTomi Valkeinen
drm_universal_plane_init() and drm_plane_init() take "unsigned long possible_crtcs" parameter, but then stuff it into uint32_t. Change the parameter to uint32_t. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-12-08drm: Take ownership of the dmabuf->obj when exportingChris Wilson
Currently the reference for the dmabuf->obj is incremented for the dmabuf in drm_gem_prime_handle_to_fd() (at the high level userspace interface), but is released in drm_gem_dmabuf_release() (the lowlevel handler). Improve the symmetry of the dmabuf->obj ownership by acquiring the reference in drm_gem_dmabuf_export(). This makes it easier to use the prime functions directly. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Update kerneldoc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161207214527.22533-1-chris@chris-wilson.co.uk
2016-12-08drm: Allow CAP_PRIME on !MODESETDaniel Vetter
vgem (and our igt tests using vgem) need this. I suspect etnaviv will fare similarly. v2. Make it build. Oops. Fixes: d5264ed3823a ("drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver") Cc: Michel Dänzer <michel.daenzer@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161207144939.22756-1-daniel.vetter@ffwll.ch
2016-12-08xen: xenbus: set error code on failurePan Bian
Variable err is initialized with 0. As a result, the return value may be 0 even if get_zeroed_page() fails to allocate memory. This patch fixes the bug, initializing err with "-ENOMEM". Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-12-08xen: set error code on failuresPan Bian
Variable rc is reset in the loop, and its value will be non-negative during the second and after repeat of the loop. If it fails to allocate memory then, it may return a non-negative integer, which indicates no error. This patch fixes the bug, assigning "-ENOMEM" to rc when kzalloc() or alloc_page() returns NULL, and removing the initialization of rc outside of the loop. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-12-08Bluetooth: btmrvl: drop duplicate header slab.hGeliang Tang
Drop duplicate header slab.h from btmrvl_drv.h. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: implement .set_frame_retries ops callbackStefan Schmidt
From firmware version 0.3 onwards we use the TX_ARET mode allowing for automatic frame retransmissions. To actually make use of this feature we need to implement the callback for setting the frame retries. If the firmware version is to old print a warning and return with invalid value. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: try to read permanent extended address from deviceStefan Schmidt
With version 0.3 the atusb firmware offers an interface to read a permanent EUI64 address from the devices EEPROM. This patch checks if the firmware is new enough and tries to read out and use the address. If this does not work we fall back to the original randomly generated address. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: store firmware version after retrieval for later useStefan Schmidt
The firmware versions will be used to enable selective features based on the available firmware on the device. Make sure we do not need to fetch it for every check but store it after the initial retrieval. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-08ieee802154: atusb: sync header file from firmware for new featuresStefan Schmidt
This file is shared between the atusb firmware and the kernel driver. In this update it brings the new interfaces from version 0.3 of the firmware. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-12-07zram: restrict add/remove attributes to root onlySergey Senozhatsky
zram hot_add sysfs attribute is a very 'special' attribute - reading from it creates a new uninitialized zram device. This file, by a mistake, can be read by a 'normal' user at the moment, while only root must be able to create a new zram device, therefore hot_add attribute must have S_IRUSR mode, not S_IRUGO. [akpm@linux-foundation.org: s/sence/sense/, reflow comment to use 80 cols] Fixes: 6566d1a32bf72 ("zram: add dynamic device add/remove functionality") Link: http://lkml.kernel.org/r/20161205155845.20129-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Steven Allen <steven@stebalien.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-08devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locksViresh Kumar
The OPP structures are abused to the best here, without understanding how the OPP core and RCU locks work. In short, the OPP pointer saved in 'rk3399_dmcfreq' can become invalid under your nose, as the OPP core may free it. Fix various abuses around OPP structures and calls. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08devfreq: rk3399_dmc: Remove dangling rcu_read_unlock()Viresh Kumar
This call never had the rcu_read_lock() counterpart. Remove the unlock part as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08devfreq: exynos: Don't use OPP structures outside of RCU locksViresh Kumar
The OPP structures are abused to the best here, without understanding how the OPP core and RCU locks work. In short, the OPP pointer saved 'struct exynos_bus' can become invalid under your nose, as the OPP core may free it. Fix various abuses around OPP structures and calls. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08cpufreq: intel_pstate: Support for energy performance hints with HWPSrinivas Pandruvada
It is possible to provide hints to the HWP algorithms in the processor to be more performance centric to more energy centric. These hints are provided by using HWP energy performance preference (EPP) or energy performance bias (EPB) settings. The scope of these settings is per logical processor, which means that each of the logical processors in the package can be programmed with a different value. This change provides cpufreq sysfs interface to provide hint. For each policy, two additional attributes will be available to check and provide hint. These attributes will only be present when the intel_pstate driver is using HWP mode. These attributes are: - energy_performance_available_preferences - energy_performance_preference To get list of supported hints: $ cat energy_performance_available_preferences default performance balance_performance balance_power power The current preference can be read or changed via cpufreq sysfs attribute "energy_performance_preference". Reading from this attribute will display current effective setting changed via any method. User can write any of the valid preference string to this attribute. User can always restore to power-on default by writing "default". Implementation Since these hints can be provided by direct MSR write or using some tools like x86_energy_perf_policy, the driver internally doesn't maintain any state. The user operation will result in direct read/write of MSR: 0x774 (HWP_REQUEST_MSR). Also driver use read modify write to update other fields in this MSR. Summary of changes: - struct cpudata field epp_saved is renamed to epp_powersave, as this stores the value to restore once policy is switched from performance to powersave to restore original powersave EPP value. - A new struct cpudata field epp_saved is used to store the raw MSR EPP/EPB value when a CPU goes offline or on suspend and restore on online/resume. This ensures that EPP value is restored to correct value irrespective of the means used to set. - EPP/EPB value ranges are fixed for each preference, which can be set for the cpufreq sysfs, so user request is mapped to/from this range. - New attributes are only added when HWP is present. - Since EPP value of 0 is valid the fields are initialized to -EINVAL when not valid. The field epp_default is read only once after powerup to avoid reading on subsequent CPU online operation - New suspend callback to store epp on suspend operation - Don't invalidate old epp_saved field on resume and online as now we can restore last epp value on suspend and this field can still have old EPP value sampled during switch to performance from powersave. - While here optimized setting of cpu_data->epp_powersave = epp in intel_pstate_hwp_set() as this was done in both true and false paths. - epp/epb set function returns error to caller on failure to pass on to user space for display. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08cpufreq: intel_pstate: Add locking around HWP requestsSrinivas Pandruvada
To avoid race conditions from multiple threads, increase the scope of intel_pstate_limits_lock to include HWP requests also. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08Merge tag 'meson-drm-for-4.10' of github.com:superna9999/linux into drm-nextDave Airlie
Add support for the Amlogic Meson Video Processing Unit - Only CVBS/Composite output for Amlogic Meson GXBB/GXL/GXM SoCs - Add MAINTAINERS entry - Add DT bindings documentation * tag 'meson-drm-for-4.10' of github.com:superna9999/linux: MAINTAINERS: add entry for Amlogic DRM drivers dt-bindings: display: add Amlogic Meson DRM Bindings drm: Add support for Amlogic Meson Graphic Controller
2016-12-08Merge tag 'drm-intel-next-fixes-2016-12-07' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-intel into drm-next first set of fixes for -next. * tag 'drm-intel-next-fixes-2016-12-07' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Move priority bumping for flips earlier drm/i915: Hold a reference on the request for its fence chain drm/i915/audio: fix hdmi audio noise issue drm/i915/debugfs: Increment return value of gt.next_seqno drm/i915/debugfs: Drop i915_hws_info drm/i915: Initialize dev_priv->atomic_cdclk_freq at init time drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things drm/i915: Make skl_write_{plane,cursor}_wm() static drm/i915: Complete requests in nop_submit_request drm/i915/gvt: fix lock not released bug for dispatch_workload() err path drm/i915/gvt: fix getting 64bit bar size error drm/i915/gvt: fix missing init param.primary
2016-12-08Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes another regression fix for the shutdown stuff. * 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: just suspend the hw on pci shutdown
2016-12-08PM / sleep: Print active wakeup sources when blocking on wakeup_count readsxing wei
If there are any wakeup events being processed, read operation on /sys/power/wakeup_count will be blocked, so print the names of all active wakeup sources to help to find out who is preventing system suspend from triggering. While at it change pr_info() in pm_print_active_wakeup_sources() to pr_debug() to avoid excessive log noise. Signed-off-by: xing wei <xing.wei@intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08drm: mxsfb: Select DRM_PANELMarek Vasut
Select DRM_PANEL, since the MXSFB driver depends on it. Otherwise, we get the following error when compiling: drivers/built-in.o: In function `mxsfb_probe': core.c:(.text+0x9ce9c): undefined reference to `drm_panel_attach' core.c:(.text+0x9cff0): undefined reference to `drm_panel_detach' drivers/built-in.o: In function `mxsfb_panel_connector_destroy': core.c:(.text+0x9d614): undefined reference to `drm_panel_detach' drivers/built-in.o: In function `mxsfb_create_output': core.c:(.text+0x9d68c): undefined reference to `of_drm_find_panel' make: *** [Makefile:962: vmlinux] Error 1 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Reported-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-12-07clk: clk-wm831x: fix a logic errorPan Bian
Fix bug https://bugzilla.kernel.org/show_bug.cgi?id=188561. Function wm831x_clkout_is_prepared() returns "true" when it fails to read CLOCK_CONTROL_1. "true" means the device is already prepared. So return "true" on the read failure seems improper. Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Fixes: f05259a6ffa4 ("clk: wm831x: Add initial WM831x clock driver") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-08PM / core: Fix bug in the error handling of async suspendSahitya Tummala
If async_suspend is enabled for parent and child devices, then PM framework has to ensure that parent's async suspend gets called only after child's async suspend is done. In case if child's async suspend fails with error, then parent's async suspend must not be invoked. The current code uses async_error to ensure this but there is a problem with it in __device_suspend(). This function notifies the completion of child's async suspend before updating its error via async_error variable. As a result, parent's async suspend gets invoked even though it's child suspend has failed. Fix this bug by updating the async_error before notifying the child's completion. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> [ rjw: Rearranged wthitespace ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-07clk: uniphier: add cpufreq data for LD11, LD20 SoCsMasahiro Yamada
Add more data to 64bit SoCs for the cpufreq support. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-07clk: uniphier: add CPU-gear change (cpufreq) supportMasahiro Yamada
Core support code for CPU frequency changes, which will be used by the generic cpufreq driver. The register view is different from the generic clk-mux; it has a separate status register, and an update bit to load the register setting. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-07Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-12-07 This series contains updates to i40e and i40evf only. Filip modifies the i40e to log link speed change and when the link is brought up and down. Mitch replaces i40e_txd_use_count() with a new function which is slightly faster and better documented so the dim witted can better follow the code. Fixes the locking of the service task so that it is actually done in the service task and not in the scheduling function which calls the service task. Jacob, being the busy little beaver he is, provides most of the changes starting restores a workaround that is still needed in some configurations, specifically the Ethernet Controller XL710 for 40GbE QSFP+. Removes duplicate code and simplifies the i40e_vsi_add_vlan() and i40e_vsi_kill_vlan() functions. Removes detection of PTP frames over L4 (UDP) on the XL710 MAC, since there was a product decision to defeature it. Fixed a previous refactor of active filters which caused issues in the accounting of active_filters. Remaining work was done in the VLAN filters to improve readability and simplify code as much as possible to reduce inconsistencies. Alex fixes foul budget accounting in core code by returning actual work done, capped to budget-1. Henry fixes the "ethtool -p" function for 1G BaseT PHYs. Carolyn adds support for 25G devices for i40e and i40evf. Michal adds functions to apply the correct access method for external PHYs which could use Clause22 or Clause45 depending on the PHY. v2: dropped last patch from previous series, since changes are needed based on feedback from Sergei Shtylyov ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07libata-scsi: disable SCT Write Same for the momentNicolai Stange
SCT Write Same support had been introduced with commit 7b2030942859 ("libata: Add support for SCT Write Same") Some problems, namely excessive userspace segfaults, had been reported at http://lkml.kernel.org/r/20160908192736.GA4356@gmail.com This lead to commit 0ce1b18c42a5 ("libata: Some drives failing on SCT Write Same") which strived to disable SCT Write Same on !ZAC devices. Due to the way this was done and to the logic in sd_config_write_same(), this didn't work for those devices that have ->max_ws_blocks > SD_MAX_WS10_BLOCKS: for these, ->no_write_same and ->max_write_same_sectors would still be non-zero, but ->ws10 == ->ws16 == 0. This would cause sd_setup_write_same_cmnd() to demultiplex REQ_OP_WRITE_SAME requests to WRITE_SAME, and these in turn aren't supported by libata-scsi: EXT4-fs (dm-1): Delayed block allocation failed for inode 2625094 at logical offset 2032 with max blocks 2 with error 121 EXT4-fs (dm-1): This should not happen!! Data will be lost 121 == EREMOTEIO is what scsi_io_completion() asserts in case of invalid opcodes. Back to the original problem of userspace segfaults: this can be tracked down to ata_format_sct_write_same() overwriting the input page. Sometimes, this page is ZERO_PAGE(0) which ceases to be filled with zeros from that point on. Since ZERO_PAGE(0) is used for userspace .bss mappings, code of the following is doomed: static char *a = NULL; /* .bss */ ... if (a) *a = 'a'; This problem is not solved by disabling SCT Write Same for !ZAC devices only. It can certainly be fixed, but the final release is quite close -- so disable SCT Write Same for all ATA devices rather than introducing some SCT key buffer allocation schemes at this point. Fixes: 7b2030942859 ("libata: Add support for SCT Write Same") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-07dummy: expend mtu range for dummy deviceZhang Shengju
After commit 61e84623ace3 ("net: centralize net_device min/max MTU checking"), the mtu range for dummy device becomes [68, 1500]. This patch extends it to [0, 65535]. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07nlmon: use core MTU range checking in nlmon driverZhang Shengju
Since commit 61e84623ace3 ("net: centralize net_device min/max MTU checking"), mtu range is checked at dev_set_mtu(). This patch adds min_mtu for nlmon device and remove unnecessary ndo_change_mtu() function. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07phy: Don't increment MDIO bus refcount unless it's a different ownerFlorian Fainelli
Commit 3e3aaf649416 ("phy: fix mdiobus module safety") fixed the way we dealt with MDIO bus module reference count, but sort of introduced a regression in that, if an Ethernet driver registers its own MDIO bus driver, as is common, we will end up with the Ethernet driver's module->refnct set to 1, thus preventing this driver from any removal. Fix this by comparing the network device's device driver owner against the MDIO bus driver owner, and only if they are different, increment the MDIO bus module refcount. Fixes: 3e3aaf649416 ("phy: fix mdiobus module safety") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07driver: macvlan: Remove the rcu member of macvlan_portGao Feng
When free macvlan_port in macvlan_port_destroy, it is safe to free directly because netdev_rx_handler_unregister could enforce one grace period. So it is unnecessary to use kfree_rcu for macvlan_port. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07driver: ipvlan: Free ipvl_port directly with kfree instead of kfree_rcuGao Feng
There are two functions which would free the ipvl_port now. The first is ipvlan_port_create. It frees the ipvl_port in the error handler, so it could kfree it directly. The second is ipvlan_port_destroy. It invokes netdev_rx_handler_unregister which enforces one grace period by synchronize_net firstly, so it also could kfree the ipvl_port directly and safely. So it is unnecessary to use kfree_rcu to free ipvl_port. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07netvsc: reduce maximum GSO sizestephen hemminger
Hyper-V (and Azure) support using NVGRE which requires some extra space for encapsulation headers. Because of this the largest allowed TSO packet is reduced. For older releases, hard code a fixed reduced value. For next release, there is a better solution which uses result of host offload negotiation. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 13:56:15 +0000