| Age | Commit message (Collapse) | Author |
|---|
|
Ensure that we tell the MAC to take the link down when phylink_stop()
is called, and that this completes prior to phylink_stop() returns.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We do not support SFP modules which require the address change sequence
as detailed by SFF 8472 revision 1.22 section 8.9. Warn when these
modules are inserted, and treat them as SFF8079 modules for ethtool.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are two bits in the option word for the RX_LOS signal. One
reports that the RX_LOS signal is active high, the other reports that
it is active low. When both or neither are set, the result is not
well defined in the specification.
Rather than assuming that neither set means normal RX_LOS, take this
as meaning no RX_LOS signal available, thereby ignoring the signal.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The options word is a be16 quantity, so we need to test the flags
having converted the endian-ness. Convert the flag bits to be16,
which can be optimised by the compiler, rather than converting a
variable at runtime.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix obvious typo that first return value is set but not checked.
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch add the optimization frontend, but adding a new eBPF IR scan
pass "nfp_bpf_opt_ldst_gather".
The pass will traverse the IR to recognize the load/store pairs sequences
that come from lowering of memory copy builtins.
The gathered memory copy information will be kept in the meta info
structure of the first load instruction in the sequence and will be
consumed by the optimization backend added in the previous patches.
NOTE: a sequence with cross memory access doesn't qualify this
optimization, i.e. if one load in the sequence will load from place that
has been written by previous store. This is because when we turn the
sequence into single CPP operation, we are reading all contents at once
into NFP transfer registers, then write them out as a whole. This is not
identical with what the original load/store sequence is doing.
Detecting cross memory access for two random pointers will be difficult,
fortunately under XDP/eBPF's restrictied runtime environment, the copy
normally happen among map, packet data and stack, they do not overlap with
each other.
And for cases supported by NFP, cross memory access will only happen on
PTR_TO_PACKET. Fortunately for this, there is ID information that we could
do accurate memory alias check.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When the gathered copy length is bigger than 32-bytes and within 128-bytes
(the maximum length a single CPP Pull/Push request can finish), the
strategy of read/write are changeed into:
* Read.
- use direct reference mode when length is within 32-bytes.
- use indirect mode when length is bigger than 32-bytes.
* Write.
- length <= 8-bytes
use write8 (direct_ref).
- length <= 32-byte and 4-bytes aligned
use write32 (direct_ref).
- length <= 32-bytes but not 4-bytes aligned
use write8 (indirect_ref).
- length > 32-bytes and 4-bytes aligned
use write32 (indirect_ref).
- length > 32-bytes and not 4-bytes aligned and <= 40-bytes
use write32 (direct_ref) to finish the first 32-bytes.
use write8 (direct_ref) to finish all remaining hanging part.
- length > 32-bytes and not 4-bytes aligned
use write32 (indirect_ref) to finish those 4-byte aligned parts.
use write8 (direct_ref) to finish all remaining hanging part.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
For NFP, we want to re-group a sequence of load/store pairs lowered from
memcpy/memmove into single memory bulk operation which then could be
accelerated using NFP CPP bus.
This patch extends the existing load/store auxiliary information by adding
two new fields:
struct bpf_insn *paired_st;
s16 ldst_gather_len;
Both fields are supposed to be carried by the the load instruction at the
head of the sequence. "paired_st" is the corresponding store instruction at
the head and "ldst_gather_len" is the gathered length.
If "ldst_gather_len" is negative, then the sequence is doing memory
load/store in descending order, otherwise it is in ascending order. We need
this information to detect overlapped memory access.
This patch then optimize memory bulk copy when the copy length is within
32-bytes.
The strategy of read/write used is:
* Read.
Use read32 (direct_ref), always.
* Write.
- length <= 8-bytes
write8 (direct_ref).
- length <= 32-bytes and is 4-byte aligned
write32 (direct_ref).
- length <= 32-bytes but is not 4-byte aligned
write8 (indirect_ref).
NOTE: the optimization should not change program semantics. The destination
register of the last load instruction should contain the same value before
and after this optimization.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
It is usual that we need to check if one BPF insn is for loading/storeing
data from/to memory.
Therefore, it makes sense to factor out related code to become common
helper functions.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add support for emitting commands with field overwrites.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When immed is used with No-Dest, the emitter should use reg.dst instead of
reg.areg for the destination, using the latter will actually encode
register zero.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The NFP normally requires the source operands to be difference addressing
modes, but we should rule out the very special NN_REG_NONE type.
There are instruction that ignores both A/B operands, for example:
local_csr_rd
For these instructions, we might pass the same operand type, NN_REG_NONE,
for both A/B operands.
NOTE: in current NFP ISA, it is only possible for instructions with
unrestricted operands to take none operands, but in case there is new and
similar instructoin in restricted form, they would follow similar rules,
so swreg_to_restricted is updated as well.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
If any of the shift insns in the ld/shift sequence is jump destination,
don't do combination.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
If the mask insn in the ld/mask pair is jump destination, then don't do
combination.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
NFP eBPF offload JIT engine is doing some instruction combine based
optimizations which however must not be safe if the combined sequences
are across basic block boarders.
Currently, there are post checks during fixing jump destinations. If the
jump destination is found to be eBPF insn that has been combined into
another one, then JIT engine will raise error and abort.
This is not optimal. The JIT engine ought to disable the optimization on
such cross-bb-border sequences instead of abort.
As there is no control flow information in eBPF infrastructure that we
can't do basic block based optimizations, this patch extends the existing
jump destination record pass to also flag the jump destination, then in
instruction combine passes we could skip the optimizations if insns in the
sequence are jump targets.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
eBPF insns are internally organized as dual-list inside NFP offload JIT.
Random access to an insn needs to be done by either forward or backward
traversal along the list.
One place we need to do such traversal is at nfp_fixup_branches where one
traversal is needed for each jump insn to find the destination. Such
traversals could be avoided if jump destinations are collected through a
single travesal in a pre-scan pass, and such information could also be
useful in other places where jump destination info are needed.
This patch adds such jump destination collection in nfp_prog_prepare.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This patch adds support for backward jump on NFP.
- restrictions on backward jump in various functions have been removed.
- nfp_fixup_branches now supports backward jump.
There is one thing to note, currently an input eBPF JMP insn may generate
several NFP insns, for example,
NFP imm move insn A \
NFP compare insn B --> 3 NFP insn jited from eBPF JMP insn M
NFP branch insn C /
---
NFP insn X --> 1 NFP insn jited from eBPF insn N
---
...
therefore, we are doing sanity check to make sure the last jited insn from
an eBPF JMP is a NFP branch instruction.
Once backward jump is allowed, it is possible an eBPF JMP insn is at the
end of the program. This is however causing trouble for the sanity check.
Because the sanity check requires the end index of the NFP insns jited from
one eBPF insn while only the start index is recorded before this patch that
we can only get the end index by:
start_index_of_the_next_eBPF_insn - 1
or for the above example:
start_index_of_eBPF_insn_N (which is the index of NFP insn X) - 1
nfp_fixup_branches was using nfp_for_each_insn_walk2 to expose *next* insn
to each iteration during the traversal so the last index could be
calculated from which. Now, it needs some extra code to handle the last
insn. Meanwhile, the use of walk2 is actually unnecessary, we could simply
use generic single instruction walk to do this, the next insn could be
easily calculated using list_next_entry.
So, this patch migrates the jump fixup traversal method to
*list_for_each_entry*, this simplifies the code logic a little bit.
The other thing to note is a new state variable "last_bpf_off" is
introduced to track the index of the last jited NFP insn. This is necessary
because NFP is generating special purposes epilogue sequences, so the index
of the last jited NFP insn is *not* always nfp_prog->prog_len - 1.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Since commit 3a025e1d1c2e ("Add optional check for bad kernel-doc
comments") when built with W=1 build will complain about kdoc errors.
Fix the kdoc issues we have. kdoc is still confused by defines in
nfp_net_ctrl.h but those are not really errors.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
commit c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM")
changed code to increment vb->num_pfns before call to
set_page_pfns(), which used to happen only after.
This patch fixes boot hang for me on ppc64le KVM guests.
Fixes: c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
index can be reused by other virtio device.
Cc: stable@vger.kernel.org
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
On driver remove(), all objects created during probe() should be
removed, but sysfs qemu_fw_cfg/rev file was left. Also reorder
functions to match probe() error cleanup code.
Cc: stable@vger.kernel.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two fixes for nasty kexec/kdump crashes in certain configurations.
A couple of minor fixes for the new TIDR code.
A fix for an oops in a CXL error handling path.
Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh
Salgaonkar, Vaibhav Jain"
* tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Do not assign thread.tidr if already assigned
powerpc: Avoid signed to unsigned conversion in set_thread_tidr()
powerpc/kexec: Fix kexec/kdump in P9 guest kernels
powerpc/powernv: Fix kexec crashes caused by tlbie tracing
cxl: Check if vphb exists before iterating over AFU devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Ensure that debugfs files are removed properly
- Fix missing blk_put_request()
- Deal with errors from blk_get_request()
- Rewind mmc bus suspend operations at failures
- Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex
MMC host:
- sdhci-msm: Make it optional to wait for signal level changes
- sdhci: Avoid swiotlb buffer being full"
* tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: prepend 0x to OCR entry in sysfs
mmc: core: prepend 0x to pre_eol_info entry in sysfs
mmc: sdhci: Avoid swiotlb buffer being full
mmc: sdhci-msm: Optionally wait for signal level changes
mmc: block: Ensure that debugfs files are removed
mmc: core: Do not leave the block driver in a suspended state
mmc: block: Check return value of blk_get_request()
mmc: block: Fix missing blk_put_request()
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes and cleanups from Dave Airlie:
"The main thing are a bunch of fixes for the new amd display code, a
bunch of smatch fixes.
core:
- Atomic helper regression fix.
- Deferred fbdev fallout regression fix.
amdgpu:
- New display code (dc) dpms, suspend/resume and smatch fixes, along
with some others
- Some regression fixes for amdkfd/radeon.
- Fix a ttm regression for swiotlb disabled
bridge:
- A bunch of fixes for the tc358767 bridge
mali-dp + hdlcd:
- some fixes and internal API catchups.
imx-drm:
-regression fix in atomic code.
omapdrm:
- platform detection regression fixes"
* tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits)
drm/imx: always call wait_for_flip_done in commit_tail
omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()
drm: omapdrm: Fix DPI on platforms using the DSI VDDS
omapdrm: hdmi4: Correct the SoC revision matching
drm/omap: displays: panel-dpi: add backlight dependency
drm/omap: Fix error handling path in 'omap_dmm_probe()'
drm/i915: Disable THP until we have a GPU read BW W/A
drm/bridge: tc358767: fix 1-lane behavior
drm/bridge: tc358767: fix AUXDATAn registers access
drm/bridge: tc358767: fix timing calculations
drm/bridge: tc358767: fix DP0_MISC register set
drm/bridge: tc358767: filter out too high modes
drm/bridge: tc358767: do no fail on hi-res displays
drm/bridge: Fix lvds-encoder since the panel_bridge rework.
drm/bridge: synopsys/dw-hdmi: Enable cec clock
drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/fb_helper: Disable all crtc's when initial setup fails.
drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
...
|
|
Pull block fixes from Jens Axboe:
"A selection of fixes/changes that should make it into this series.
This contains:
- NVMe, two merges, containing:
- pci-e, rdma, and fc fixes
- Device quirks
- Fix for a badblocks leak in null_blk
- bcache fix from Rui Hua for a race condition regression where
-EINTR was returned to upper layers that didn't expect it.
- Regression fix for blktrace for a bug introduced in this series.
- blktrace cleanup for cgroup id.
- bdi registration error handling.
- Small series with cleanups for blk-wbt.
- Various little fixes for typos and the like.
Nothing earth shattering, most important are the NVMe and bcache fixes"
* 'for-linus' of git://git.kernel.dk/linux-block: (34 commits)
nvme-pci: fix NULL pointer dereference in nvme_free_host_mem()
nvme-rdma: fix memory leak during queue allocation
blktrace: fix trace mutex deadlock
nvme-rdma: Use mr pool
nvme-rdma: Check remotely invalidated rkey matches our expected rkey
nvme-rdma: wait for local invalidation before completing a request
nvme-rdma: don't complete requests before a send work request has completed
nvme-rdma: don't suppress send completions
bcache: check return value of register_shrinker
bcache: recover data from backing when data is clean
bcache: Fix building error on MIPS
bcache: add a comment in journal bucket reading
nvme-fc: don't use bit masks for set/test_bit() numbers
blk-wbt: fix comments typo
blk-wbt: move wbt_clear_stat to common place in wbt_done
blk-sysfs: remove NULL pointer checking in queue_wb_lat_store
blk-wbt: remove duplicated setting in wbt_init
nvme-pci: add quirk for delay before CHK RDY for WDC SN200
block: remove useless assignment in bio_split
null_blk: fix dev->badblocks leak
...
|
|
Currently, when you disconnect the device, the driver infinitely
resubmits all URBs, so you see:
Rx URB aborted (-32)
in an infinite loop.
Fix this by catching -EPIPE (what we get in urb->status when the device
disconnects) and not resubmitting.
With this patch, I can plug and unplug many times and the driver
recovers correctly.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix typo "analizer" --> "Analyzer".
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for VF610 to report correct state
transitions.
Tested-by: Mirza Krak <mirza.krak@gmail.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The flexcan IP cores used on MX25 and MX35 do not generate Error Passive
IRQs. Update the IP core overview table in the driver accordingly.
Suggested-by: ZHU Yi (ST-FIR/ENG1-Zhu) <Yi.Zhu5@cn.bosch.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
PCI/PCIe drivers for PEAK-System CAN/CAN-FD interfaces do some access to the
PCI config during probing. In case one of these accesses fails, a POSITIVE
PCIBIOS_xxx error code is returned back. This POSITIVE error code MUST be
converted into a NEGATIVE errno for the probe() function to indicate it
failed. Using the pcibios_err_to_errno() function, we make sure that the
return code will always be negative.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
After commit d75b1ade567f ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget.
So we need to return budget if there are still packets to receive.
Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Avoid flooding the kernel log with "Formate error", if incomplete message
are received.
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The conditon in the while-loop becomes true when actual_length is less than
2 (MSG_HEADER_LEN). In best case we end up with a former, already
dispatched msg, that got msg->len greater than actual_length. This will
result in a "Format error" error printout.
Problem seen when unplugging a Kvaser USB device connected to a vbox guest.
warning: comparison between signed and unsigned integer expressions
[-Wsign-compare]
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The allocated buffer was not freed if usb_submit_urb() failed.
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch adds platform specific details for NXP SOC LS1021A to the
flexcan driver code.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Reviewed-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
controllers.
The FlexCAN driver assumed that FlexCAN controller is big endian for
powerpc architecture and little endian for other architectures.
But this may not be the case. FlexCAN controller can be little or big
endian on any architecture. For e.g. NXP LS1021A ARM based SOC has big
endian FlexCAN controller.
Therefore, the driver has been modified to add a provision for both
types of controllers using an additional device tree property. On a
"fsl,p1010-flexcan" device BE is default, on all other devices LE is.
Big Endian controllers should have "big-endian" set in the device tree.
check "Documentation/devicetree/bindings/net/can/fsl-flexcan.txt" for
usage.
This is the standard practice followed in linux. for more info check:
Documentation/devicetree/bindings/common-properties.txt
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Sakar Arora <Sakar.Arora@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Reviewed-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Make c_can_pci_data structures const as they are only used during
a copy operation.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This changes the calculation of the timestamps to use ktime_t
instead of struct timeval as the base. This gets rid of one
of the few remaining users of the deprecated ktime_to_timeval()
and timeval_to_ktime() helpers.
The code should also get more efficient, as we have now removed
all of the divisions.
I have left the cut-off for resetting the counters as 4.200
seconds, in order to leave the behavior unchanged otherwise.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
We want to remove 'struct timeval' and related interfaces since this is
generally not safe for use beyond 2038.
For peak_usb, we can simplify the internal interface by using ktime_t
directly. This should not change any behavior, but it avoids a few
conversions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a regression related to the ACPI EC handling during system
suspend/resume on some platforms and prevent modalias from being
exposed to user space for ACPI device object with "not functional and
not present" status.
Specifics:
- Fix an ACPI EC driver regression (from the 4.9 cycle) causing the
driver's power management operations to be omitted during system
suspend/resume on platforms where the EC instance from the ECDT
table is used instead of the one from the DSDT (Lv Zheng).
- Prevent modalias from being exposed to user space for ACPI device
objects with _STA returning 0 (not present and not functional) to
prevent driver modules from being loaded automatically for hardware
that is not actually present on some platforms (Hans de Goede)"
* tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix regression related to PM ops support in ECDT device
ACPI / bus: Leave modalias empty for devices which are not present
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- add missing module information to the Mediatek cpufreq driver module
(Jesse Chan)
- fix config dependencies for the Loongson cpufreq driver (James Hogan)
- fix two issues related to CPU offline in the cpupower utility
(Abhishek Goel).
* tag 'pm-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: mediatek: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
cpufreq: Add Loongson machine dependencies
cpupower : Fix cpupower working when cpu0 is offline
cpupowerutils: bench - Fix cpu online check
|
|
into drm-fixes
Fixes for 4.15. Highlights:
- DC fixes for S3, gamma, audio, pageflipping, etc.
- fix a regression in radeon from kfd removal
- fix a ttm regression with swiotlb disabled
- misc other fixes
* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux: (36 commits)
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/amd/display: USB-C / thunderbolt dock specific workaround
drm/amd/display: Switch to drm_atomic_helper_wait_for_flip_done
drm/amd/display: fix gamma setting
drm/amd/display: Do not put drm_atomic_state on resume
drm/amd/display: Fix couple more inconsistent NULL checks in dc_resource
drm/amd/display: Fix potential NULL and mem leak in create_links
drm/amd/display: Fix hubp check in set_cursor_position
drm/amd/display: Fix use before NULL check in validate_timing
drm/amd/display: Bunch of smatch error and warning fixes in DC
drm/amd/display: Fix amdgpu_dm bugs found by smatch
drm/amd/display: try to find matching audio inst for enc inst first
drm/amd/display: fix seq issue: turn on clock before programming afmt.
drm/amd/display: fix memory leaks on error exit return
drm/amd/display: check plane state before validating fbc
drm/amd/display: Do DC mode-change check when adding CRTCs
drm/amd/display: Revert noisy assert messages
drm/amd/display: fix split viewport rounding error
drm/amd/display: Check aux channel before MST resume
...
|
|
drm-fixes
mali-dp interface cleanups.
* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
drm: mali-dp: Disable planes when their CRTC gets disabled.
drm: mali-dp: Separate static internal data into a read-only structure.
drm/arm: Replace instances of drm_dev_unref with drm_dev_put.
drm: mali-dp: switch to drm_*_get(), drm_*_put() helpers
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-fixes
This is amdkfd pull request for -rc2. It contains three small fixes to the
CIK SDMA code, compilation error fix in kfd_ioctl.h and fix to accessing
a pointer after it was released.
* tag 'drm-amdkfd-fixes-2017-11-26' of git://people.freedesktop.org/~gabbayo/linux:
uapi: fix linux/kfd_ioctl.h userspace compilation errors
drm/amdkfd: fix amdkfd use-after-free GP fault
drm/amdkfd: Fix SDMA oversubsription handling
drm/amdkfd: Fix SDMA ring buffer size calculation
drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode
|
|
3 hdlcd fixes/cleanups
* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
drm/arm: Replace instances of drm_dev_unref with drm_dev_put.
drm: Fix checkpatch issue: "WARNING: braces {} are not necessary for single statement blocks."
drm: hdlcd: Update PM code to save/restore console.
|
|
git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: fix commit_tail for new drm_atomic_helper_setup_commit
Since commit 080de2e5be2d ("drm/atomic: Check for busy planes/connectors before
setting the commit"), drm_atomic_helper_setup_commit expects that blocking
commits have completed flipping before the commit_tail returns. Add the missing
wait_for_flip_done to commit_tail to ensure this.
* tag 'imx-drm-fixes-2017-11-30' of git://git.pengutronix.de/git/pza/linux:
drm/imx: always call wait_for_flip_done in commit_tail
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Disable transparent huge pages for now until we have a W/A
- Building fix when CONFIG_BACKLIGHT_CLASS_DEVICE is not selected
- GMBUS communication robustness
- Fbdev hotplug handling fix
gvt-fixes-2017-11-28
- regression fix for sane request alloc (Fred)
- locking fix (Changbin)
- fix invalid addr mask (Xiong)
- compression regression fix (Weinan)
- fix default pipe enable for virtual display (Xiaolin)
* tag 'drm-intel-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Disable THP until we have a GPU read BW W/A
drm/i915/gvt: Correct ADDR_4K/2M/1G_MASK definition
drm/i915/gvt: enabled pipe A default on creating vgpu
drm/i915/gvt: Move request alloc to dispatch_workload path only
drm/i915/gvt: remove skl_misc_ctl_write handler
drm/i915/gvt: Fix unsafe locking caused by spin_unlock_bh
drm/i915: fix intel_backlight_device_register declaration
drm/i915/fbdev: Serialise early hotplug events with async fbdev config
drm/i915: Prevent zero length "index" write
drm/i915: Don't try indexed reads to alternate slave addresses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes
omapdrm fixes for 4.15
* Fix platform detection issue causing OMAP3 DPI output to have missing color bits
* Fix platform detection issue causing OMAP4 HDMI audio not to work
* tag 'omapdrm-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()
drm: omapdrm: Fix DPI on platforms using the DSI VDDS
omapdrm: hdmi4: Correct the SoC revision matching
drm/omap: displays: panel-dpi: add backlight dependency
drm/omap: Fix error handling path in 'omap_dmm_probe()'
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for -rc2
- big pile of bridge driver (mostly tc358767), all handled by Archit
and Andrez
- rockchip dsi fix
- atomic helper regression fix for spurious -EBUSY (Maarten)
- fix deferred fbdev fallout (Maarten)
* tag 'drm-misc-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: tc358767: fix 1-lane behavior
drm/bridge: tc358767: fix AUXDATAn registers access
drm/bridge: tc358767: fix timing calculations
drm/bridge: tc358767: fix DP0_MISC register set
drm/bridge: tc358767: filter out too high modes
drm/bridge: tc358767: do no fail on hi-res displays
drm/bridge: Fix lvds-encoder since the panel_bridge rework.
drm/bridge: synopsys/dw-hdmi: Enable cec clock
drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
drm/fb_helper: Disable all crtc's when initial setup fails.
drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
drm/rockchip: dw-mipi-dsi: fix possible un-balanced runtime PM enable
|
