| Age | Commit message (Collapse) | Author |
|---|
|
The concept of transfers is gone since commit 47e9624616c8 ("block:
remove support for cryptoloop and the xor transfer").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While loop_configure simplify assigns the flags passed in by userspace,
loop_set_status only looks at the two changeable flags, and currently
has to do a complicate dance to implement that.
Move assign lo->lo_flags out of loop_set_status_from_info into the
callers and thus drastically simplify the lo_flags handling in
loop_set_status.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper and document the callers that
do not freeze the queue at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace loop_reconfigure_limits with a slightly less encompassing
loop_update_limits that expects the caller to acquire and commit the
queue limits to prepare for sorting out the freeze vs limits lock
ordering.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
This also allows removes the need for the separate __nbd_set_size helper,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock.
Unlike most queue updates this does not use the
queue_limits_commit_update_frozen helper as the nvme driver want the
queue frozen for more than just the limits update.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper that freezes the queue, updates the queue limits and
unfreezes the queue and convert all open coded versions of that to the
new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In some scenarios, some multipath software setup places the
REQ_FAILFAST_DEV flag on I/O to prevent retries and immediately
switch to other paths for issuing I/O commands. This will reflect
on the NVMe read and write commands with the limited retry flag.
However, the current NVMe target side does not handle the limited
retry flag, and the target's underlying driver still retries the
I/O. This will result in the I/O not being quickly switched to
other paths, ultimately leading to increased I/O latency.
When the nvme target receive an rw command with limited retry flag,
handle it in block backend by setting the REQ_FAILFAST_DEV flag to
bio.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Following process can cause nbd_config UAF:
1) grab nbd_config temporarily;
2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:
nbd_genl_disconnect
nbd_disconnect_and_put
nbd_disconnect
flush_workqueue(nbd->recv_workq)
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
nbd_config_put
-> due to step 1), reference is still not zero
3) nbd_genl_reconfigure() queue recv_work() again;
nbd_genl_reconfigure
config = nbd_get_config_unlocked(nbd)
if (!config)
-> succeed
if (!test_bit(NBD_RT_BOUND, ...))
-> succeed
nbd_reconnect_socket
queue_work(nbd->recv_workq, &args->work)
4) step 1) release the reference;
5) Finially, recv_work() will trigger UAF:
recv_work
nbd_config_put(nbd)
-> nbd_config is freed
atomic_dec(&config->recv_threads)
-> UAF
Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so
that nbd_genl_reconfigure() will fail.
Fixes: b7aa3d39385d ("nbd: add a reconfigure netlink command")
Reported-by: syzbot+6b0df248918b92c33e6a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/675bfb65.050a0220.1a2d0d.0006.GAE@google.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250103092859.3574648-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use a plain BLK_MQ_F_* flag to select the round robin tag selection
instead of overlaying an enum with just two possible values into the
flags space.
Doing so allows adding a BLK_MQ_F_MAX sentinel for simplified overflow
checking in the messy debugfs helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250106083531.799976-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only queues that really can't support a scheduler are those that
do not have a gendisk associated with them, and thus can't be used for
non-passthrough commands. In addition to those null_blk can optionally
set the flag, which is a bad odd. Replace the null_blk usage with
BLK_MQ_F_NO_SCHED_BY_DEFAULT to keep the expected semantics and then
remove BLK_MQ_F_NO_SCHED as the non-disk queues never call into
elevator_init_mq or blk_register_queue which adds the sysfs attributes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250106083531.799976-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Lift bio_split_rw_at into blk_rq_append_bio so that it validates the
hardware limits. With this all passthrough callers can simply add
bio_add_page to build the bio and delay checking for exceeding of limits
to this point instead of doing it for each page.
While this looks like adding a new expensive loop over all bio_vecs,
blk_rq_append_bio is already doing that just to counter the number of
segments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20250103073417.459715-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
dev->bounce_size is only initialized after it is used to set the queue
limits. Fix this by using BOUNCE_SIZE instead.
Fixes: a7f18b74dbe17162 ("ps3disk: pass queue_limits to blk_mq_alloc_disk")
Reported-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Closes: https://lore.kernel.org/39256db9-3d73-4e86-a49b-300dfd670212@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/06988f959ea6885b8bd7fb3b9059dd54bc6bbad7.1735894216.git.geert+renesas@glider.be
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BLK_MQ_F_SHOULD_MERGE is set for all tag_sets except those that purely
process passthrough commands (bsg-lib, ufs tmf, various nvme admin
queues) and thus don't even check the flag. Remove it to simplify the
driver interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241219060214.1928848-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace all users of blk_mq_virtio_map_queues with the more generic
blk_mq_map_hw_queues. This in preparation to retire
blk_mq_virtio_map_queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-7-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace all users of blk_mq_pci_map_queues with the more generic
blk_mq_map_hw_queues. This in preparation to retire
blk_mq_pci_map_queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-6-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace all users of blk_mq_pci_map_queues with the more generic
blk_mq_map_hw_queues. This in preparation to retire
blk_mq_pci_map_queues.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-5-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct bus_type has a new callback for retrieving the IRQ affinity for a
device. Hook this callback up for virtio based devices.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-3-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct bus_type has a new callback for retrieving the IRQ affinity for a
device. Hook this callback up for PCI based devices.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20241202-refactor-blk-affinity-helpers-v6-2-27211e9c2cd5@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use page->private to store the index instead of page->index.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241216160849.31739-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using `InPlaceModule` avoids an allocation and an indirection.
Signed-off-by: Benoît du Garreau <benoit@dugarreau.fr>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241204-rnull_in_place-v1-1-efe3eafac9fb@dugarreau.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 43b62ce3ff0a ("block: move bio io prio to a new field"), macro
bio_set_prio() does nothing but set bio->bi_ioprio. All other places just
set bio->bi_ioprio directly, so replace bio_set_prio() remaining
callsites with setting bio->bi_ioprio directly and delete that macro.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20241202111957.2311683-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 43b62ce3ff0a ("block: move bio io prio to a new field"), macro
bio_prio() does nothing but return the value in bio->bi_ioprio. Most other
places just read bio->bi_ioprio directly, so replace bi_ioprio() callsites
with reading bio->bi_ioprio directly and delete that macro.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20241202111957.2311683-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To facilitate testing of kernel functions related to the rotational
feature (BLK_FEAT_ROTATIONAL) of a block device (e.g. NVMe rotational
bit support), add the rotational boolean configfs attribute and module
parameter to the null_blk driver. If set, a null block device will
report being a rotational device through it queue limits features with
the BLK_FEAT_ROTATIONAL flag.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20241126000956.95983-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks)
platforms
- Add missing root #address-cells/#size-cells in default empty DT
- Fix uninitialized variable in of_irq_parse_one()
- Fix interrupt-map cell length check in of_irq_parse_imap_parent()
- Fix refcount handling in __of_get_dma_parent()
- Fix error path in of_parse_phandle_with_args_map()
- Fix dma-ranges handling with flags cells
- Drop explicit fw_devlink handling of 'interrupt-parent'
- Fix "compression" typo in fixed-partitions binding
- Unify "fsl,liodn" property type definitions
* tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Add coreboot firmware to excluded default cells list
of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one()
of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent()
of: Fix refcount leakage for OF node returned by __of_get_dma_parent()
of: Fix error path in of_parse_phandle_with_args_map()
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
of: Add #address-cells/#size-cells in the device-tree root empty node
dt-bindings: Unify "fsl,liodn" type definitions
of: address: Preserve the flags portion on 1:1 dma-ranges mapping
of/unittest: Add empty dma-ranges address translation tests
of: property: fw_devlink: Do not use interrupt-parent directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two more small fixes, correcting the cacheline size on Raspberry Pi 5
and fixing a logic mistake in the microchip mpfs firmware driver"
* tag 'soc-fixes-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes. 16 are cc:stable. 19 are MM and 6 are non-MM.
The usual bunch of singletons and doubletons - please see the relevant
changelogs for details"
* tag 'mm-hotfixes-stable-2024-12-21-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm: huge_memory: handle strsep not finding delimiter
alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUG
alloc_tag: fix module allocation tags populated area calculation
mm/codetag: clear tags before swap
mm/vmstat: fix a W=1 clang compiler warning
mm: convert partially_mapped set/clear operations to be atomic
nilfs2: fix buffer head leaks in calls to truncate_inode_pages()
vmalloc: fix accounting with i915
mm/page_alloc: don't call pfn_to_page() on possibly non-existent PFN in split_large_buddy()
fork: avoid inappropriate uprobe access to invalid mm
nilfs2: prevent use of deleted inode
zram: fix uninitialized ZRAM not releasing backing device
zram: refuse to use zero sized block device as backing device
mm: use clear_user_(high)page() for arch with special user folio handling
mm: introduce cpu_icache_is_aliasing() across all architectures
mm: add RCU annotation to pte_offset_map(_lock)
mm: correctly reference merged VMA
mm: use aligned address in copy_user_gigantic_page()
mm: use aligned address in clear_gigantic_page()
mm: shmem: fix ShmemHugePages at swapout
...
|
|
My tests run an allyesconfig build and it failed with the following errors:
LD [M] samples/kfifo/dma-example.ko
ld.lld: error: undefined symbol: nec7210_board_reset
ld.lld: error: undefined symbol: nec7210_read
ld.lld: error: undefined symbol: nec7210_write
It appears that some modules call the function nec7210_board_reset()
that is defined in nec7210.c. In an allyesconfig build, these other
modules are built in. But the file that holds nec7210_board_reset()
has:
obj-m += nec7210.o
Where that "-m" means it only gets built as a module. With the other
modules built in, they have no access to nec7210_board_reset() and the build
fails.
This isn't the only function. After fixing that one, I hit another:
ld.lld: error: undefined symbol: push_gpib_event
ld.lld: error: undefined symbol: gpib_match_device_path
Where push_gpib_event() was also used outside of the file it was defined
in, and that file too only was built as a module.
Since the directory that nec7210.c is only traversed when
CONFIG_GPIB_NEC7210 is set, and the directory with gpib_common.c is only
traversed when CONFIG_GPIB_COMMON is set, use those configs as the
option to build those modules. When it is an allyesconfig, then they
will both be built in and their functions will be available to the other
modules that are also built in.
Fixes: 3ba84ac69b53e ("staging: gpib: Add nec7210 GPIB chip driver")
Fixes: 9dde4559e9395 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a clang build issue with mediatec vcodec
- add missing variable initialization to dib3000mb write function
* tag 'media/v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinline
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some amd-pstate driver issues:
- Detect preferred core support in amd-pstate before driver
registration to avoid initialization ordering issues (K Prateek
Nayak)
- Fix issues with with boost numerator handling in amd-pstate leading
to inconsistently programmed CPPC max performance values (Mario
Limonciello)"
* tag 'pm-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies
cpufreq/amd-pstate: Store the boost numerator as highest perf again
cpufreq/amd-pstate: Detect preferred core support before driver registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues with the user thermal thresholds feature introduced in
this development cycle (Daniel Lezcano)"
* tag 'thermal-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/thresholds: Fix boundaries and detection routine
thermal/thresholds: Fix uapi header macros leading to a compilation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix reporting of negative temperature, current, and voltage values in
the tmp513 driver
* tag 'hwmon-for-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (tmp513) Fix interpretation of values of Temperature Result and Limit Registers
hwmon: (tmp513) Fix Current Register value interpretation
hwmon: (tmp513) Fix interpretation of values of Shunt Voltage and Limit Registers
|
|
Google Juniper and other Chromebook platforms have a very old bootloader
which populates /firmware node without proper address/size-cells leading
to warnings:
Missing '#address-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Hardware name: Google juniper sku16 board (DT)
...
Missing '#size-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:133 of_bus_n_size_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Tainted: [W]=WARN
Hardware name: Google juniper sku16 board (DT)
These platform won't receive updated bootloader/firmware, so add an
exclusion for platforms with a "coreboot" compatible node. While this is
wider than necessary, that's the easiest fix and it doesn't doesn't
matter if we miss checking other platforms using coreboot.
We may revisit this later and address with a fixup to the DT itself.
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/Z0NUdoG17EwuCigT@sashalap/
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Minor cleanups for bdev/nvme using the helpers introduced
- Revert of a deadlock fix that still needs more work
- Fix a UAF of hctx in the cpu hotplug code
* tag 'block-6.13-20241220' of git://git.kernel.dk/linux:
block: avoid to reuse `hctx` not removed from cpuhp callback list
block: Revert "block: Fix potential deadlock while freezing queue and acquiring sysfs_lock"
nvme: use blk_validate_block_size() for max LBA check
block/bdev: use helper for max block size check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some important, and small, fixes for USB and Thunderbolt
issues that have come up in the -rc releases. And some new device ids
for good measure. Included in here are:
- Much reported xhci bugfix for usb-storage devices (and other
devices as well, tripped me up on a video camera)
- thunderbolt fixes for some small reported issues
- new usb-serial device ids
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: fix ring expansion regression in 6.13-rc1
xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic
thunderbolt: Improve redrive mode handling
USB: serial: option: add Telit FE910C04 rmnet compositions
USB: serial: option: add MediaTek T7XX compositions
USB: serial: option: add Netprisma LCUK54 modules for WWAN Ready
USB: serial: option: add MeiG Smart SLM770A
USB: serial: option: add TCL IK512 MBIM & ECM
thunderbolt: Don't display nvm_version unless upgrade supported
thunderbolt: Add support for Intel Panther Lake-M/P
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A fix for the remove path of the Rockchip driver, the code was just
clearly and obviously wrong"
* tag 'spi-fix-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rockchip-sfc: Fix error in remove progress
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"The recently added regulator-uv-survival-time-ms property was renamed
during the review of the series that added it, but unfortunately only
in the DT binding and not in the code that parses the binding.
This brings the code in line with the binding, if someone started
using the original name we can add compat support for it but there's
nothing upstream yet and it's a very niche feature so hopefully not"
* tag 'regulator-fix-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rename regulator-uv-survival-time-ms according to DT binding
|
|
Pull drm fixes from Dave Airlie:
"Probably the last pull before Christmas holidays, I'll still be around
for most of the time anyways, nothing too major in here, bunch of
amdgpu and i915 along with a smattering of fixes across the board.
core:
- fix FB dependency
- avoid div by 0 more in vrefresh
- maintainers update
display:
- fix DP tunnel error path
dma-buf:
- fix !DEBUG_FS
sched:
- docs warning fix
panel:
- collection of misc panel fixes
i915:
- Reset engine utilization buffer before registration
- Ensure busyness counter increases motonically
- Accumulate active runtime on gt reset
amdgpu:
- Disable BOCO when CONFIG_HOTPLUG_PCI_PCIE is not enabled
- scheduler job fixes
- IP version check fixes
- devcoredump fix
- GPUVM update fix
- NBIO 2.5 fix
udmabuf:
- fix memory leak on last export
- sealing fixes
ivpu:
- fix NULL pointer
- fix memory leak
- fix WARN"
* tag 'drm-fixes-2024-12-20' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/sched: Fix drm_sched_fini() docu generation
accel/ivpu: Fix WARN in ivpu_ipc_send_receive_internal()
accel/ivpu: Fix memory leak in ivpu_mmu_reserved_context_init()
accel/ivpu: Fix general protection fault in ivpu_bo_list()
drm/amdgpu/nbio7.0: fix IP version check
drm/amd: Update strapping for NBIO 2.5.0
drm/amdgpu: Handle NULL bo->tbo.resource (again) in amdgpu_vm_bo_update
drm/amdgpu: fix amdgpu_coredump
drm/amdgpu/smu14.0.2: fix IP version check
drm/amdgpu/gfx12: fix IP version check
drm/amdgpu/mmhub4.1: fix IP version check
drm/amdgpu/nbio7.11: fix IP version check
drm/amdgpu/nbio7.7: fix IP version check
drm/amdgpu: don't access invalid sched
drm/amd: Require CONFIG_HOTPLUG_PCI_PCIE for BOCO
drm: rework FB_CORE dependency
drm/fbdev: Select FB_CORE dependency for fbdev on DMA and TTM
fbdev: Fix recursive dependencies wrt BACKLIGHT_CLASS_DEVICE
i915/guc: Accumulate active runtime on gt reset
i915/guc: Ensure busyness counter increases motonically
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc driver fixes for v6.13-rc4
A single fix for the Auto Update driver, where a mistake in array
indexing (accessing as a u32 rather than a u8) caused the driver to read
the wrong feature disable bits.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
Link: https://lore.kernel.org/r/20241218-suffrage-unfazed-fa0113072a42@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2024-12-18:
amdgpu:
- Disable BOCO when CONFIG_HOTPLUG_PCI_PCIE is not enabled
- scheduler job fixes
- IP version check fixes
- devcoredump fix
- GPUVM update fix
- NBIO 2.5 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218204637.2966198-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13-rc4:
- udma-buf fixes related to sealing.
- dma-buf build warning fix when debugfs is not enabled.
- Assorted drm/panel fixes.
- Correct error return in drm_dp_tunnel_mgr_create.
- Fix even more divide by zero in drm_mode_vrefresh.
- Fix FBDEV dependencies in Kconfig.
- Documentation fix for drm_sched_fini.
- IVPU NULL pointer, memory leak and WARN fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0763051-87b7-483e-89e0-a9f993383450@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: try the outer netns attribute in rtnl_get_peer_net()
- rust: net::phy fix module autoloading
Current release - new code bugs:
- phy: avoid undefined behavior in *_led_polarity_set()
- eth: octeontx2-pf: fix netdev memory leak in rvu_rep_create()
Previous releases - regressions:
- smc: check sndbuf_space again after NOSPACE flag is set in smc_poll
- ipvs: fix clamp() of ip_vs_conn_tab on small memory systems
- dsa: restore dsa_software_vlan_untag() ability to operate on
VLAN-untagged traffic
- eth:
- tun: fix tun_napi_alloc_frags()
- ionic: no double destroy workqueue
- idpf: trigger SW interrupt when exiting wb_on_itr mode
- rswitch: rework ts tags management
- team: fix feature exposure when no ports are present
Previous releases - always broken:
- core: fix repeated netlink messages in queue dump
- mdiobus: fix an OF node reference leak
- smc: check iparea_offset and ipv6_prefixes_cnt when receiving
proposal msg
- can: fix missed interrupts with m_can_pci
- eth: oa_tc6: fix infinite loop error when tx credits becomes 0"
* tag 'net-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: mctp: handle skb cleanup on sock_queue failures
net: mdiobus: fix an OF node reference leak
octeontx2-pf: fix error handling of devlink port in rvu_rep_create()
octeontx2-pf: fix netdev memory leak in rvu_rep_create()
psample: adjust size if rate_as_probability is set
netdev-genl: avoid empty messages in queue dump
net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic
selftests: openvswitch: fix tcpdump execution
net: usb: qmi_wwan: add Quectel RG255C
net: phy: avoid undefined behavior in *_led_polarity_set()
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
can: m_can: fix missed interrupts with m_can_pci
can: m_can: set init flag earlier in probe
rtnetlink: Try the outer netns attribute in rtnl_get_peer_net().
net: netdevsim: fix nsim_pp_hold_write()
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate()
net: ethernet: bgmac-platform: fix an OF node reference leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- mtk-sd: Cleanup the wakeup configuration in error/remove-path
- sdhci-tegra: Correct quirk for ADMA2 length
* tag 'mmc-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mtk-sd: disable wakeup in .remove() and in the error path of .probe()
mmc: sdhci-tegra: Remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix regression in pwm-stm32 driver when converting to new waveform
support
Fabrice Gasnier found and fixed a regression I introduced with
v6.13-rc1 when converting the stm32 pwm driver to support the new
waveform stuff. On some hardware variants this completely broke the
driver"
* tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix complementary output in round_waveform_tohw()
|
|
If a PCIe port only supports a single speed, enabling bandwidth control
is pointless: There's no need to monitor autonomous speed changes, nor
can the speed be changed.
Not enabling it saves a small amount of memory and compute resources,
but also fixes a boot hang reported by Niklas: It occurs when enabling
bandwidth control on Downstream Ports of Intel JHL7540 "Titan Ridge 2018"
Thunderbolt controllers. The ports only support 2.5 GT/s in accordance
with USB4 v2 sec 11.2.1, so the present commit works around the issue.
PCIe r6.2 sec 8.2.1 prescribes that:
"A device must support 2.5 GT/s and is not permitted to skip support
for any data rates between 2.5 GT/s and the highest supported rate."
Consequently, bandwidth control is currently only disabled if a port
doesn't support higher speeds than 2.5 GT/s. However the Implementation
Note in PCIe r6.2 sec 7.5.3.18 cautions:
"It is strongly encouraged that software primarily utilize the
Supported Link Speeds Vector instead of the Max Link Speed field,
so that software can determine the exact set of supported speeds on
current and future hardware. This can avoid software being confused
if a future specification defines Links that do not require support
for all slower speeds."
In other words, future revisions of the PCIe Base Spec may allow gaps
in the Supported Link Speeds Vector. To be future-proof, don't just
check whether speeds above 2.5 GT/s are supported, but rather check
whether *more than one* speed is supported.
Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Closes: https://lore.kernel.org/r/db8e457fcd155436449b035e8791a8241b0df400.camel@kernel.org
Link: https://lore.kernel.org/r/3564908a9c99fc0d2a292473af7a94ebfc8f5820.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonthan.Cameron@huawei.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Supported Link Speeds Vector in the Link Capabilities 2 Register
indicates the *supported* link speeds. The Max Link Speed field in the
Link Capabilities Register indicates the *maximum* of those speeds.
pcie_get_supported_speeds() neglects to honor the Max Link Speed field and
will thus incorrectly deem higher speeds as supported. Fix it.
One user-visible issue addressed here is an incorrect value in the sysfs
attribute "max_link_speed".
But the main motivation is a boot hang reported by Niklas: Intel JHL7540
"Titan Ridge 2018" Thunderbolt controllers supports 2.5-8 GT/s speeds,
but indicate 2.5 GT/s as maximum. Ilpo recalls seeing this on more
devices. It can be explained by the controller's Downstream Ports
supporting 8 GT/s if an Endpoint is attached, but limiting to 2.5 GT/s
if the port interfaces to a PCIe Adapter, in accordance with USB4 v2
sec 11.2.1:
"This section defines the functionality of an Internal PCIe Port that
interfaces to a PCIe Adapter. [...]
The Logical sub-block shall update the PCIe configuration registers
with the following characteristics: [...]
Max Link Speed field in the Link Capabilities Register set to 0001b
(data rate of 2.5 GT/s only).
Note: These settings do not represent actual throughput. Throughput
is implementation specific and based on the USB4 Fabric performance."
The present commit is not sufficient on its own to fix Niklas' boot hang,
but it is a prerequisite: A subsequent commit will fix the boot hang by
enabling bandwidth control only if more than one speed is supported.
The GENMASK() macro used herein specifies 0 as lowest bit, even though
the Supported Link Speeds Vector ends at bit 1. This is done on purpose
to avoid a GENMASK(0, 1) macro if Max Link Speed is zero. That macro
would be invalid as the lowest bit is greater than the highest bit.
Ilpo has witnessed a zero Max Link Speed on Root Complex Integrated
Endpoints in particular, so it does occur in practice. (The Link
Capabilities Register is optional on RCiEPs per PCIe r6.2 sec 7.5.3.)
Fixes: d2bd39c0456b ("PCI: Store all PCIe Supported Link Speeds")
Closes: https://lore.kernel.org/r/70829798889c6d779ca0f6cd3260a765780d1369.camel@kernel.org
Link: https://lore.kernel.org/r/fe03941e3e1cc42fb9bf4395e302bff53ee2198b.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Commit baf4afc5831438 ("drm/sched: Improve teardown documentation")
added a list of drm_sched_fini()'s problems. The list triggers htmldocs
warning (but renders correctly in htmldocs output):
Documentation/gpu/drm-mm:571: ./drivers/gpu/drm/scheduler/sched_main.c:1359: ERROR: Unexpected indentation.
Separate the list from the preceding paragraph by a blank line to fix
the warning. While at it, also end the aforementioned paragraph by a
colon.
Fixes: baf4afc58314 ("drm/sched: Improve teardown documentation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241108175655.6d3fcfb7@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[phasta: Adjust commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217034915.62594-1-bagasdotme@gmail.com
|
