summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-03-13net/wireless: fix spaces and grammar copy/paste in vendor Kconfig help textRandy Dunlap
Lots of the wireless driver vendor Kconfig symol help text says "questions about cards." (2 spaces between "about" and "cards") Besides dropping one of those spaces, it also needs some other word inserted there. Instead of putting each vendor's name there, I chose to say "these" cards in all of the Kconfig help text. Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13ssb: use put_device() if device_register failArvind Yadav
Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13bcma: Prevent build of PCI host features in moduleMatt Redfearn
Attempting to build bcma.ko with BCMA_DRIVER_PCI_HOSTMODE=y results in a build error due to use of symbols not exported from vmlinux: ERROR: "pcibios_enable_device" [drivers/bcma/bcma.ko] undefined! ERROR: "register_pci_controller" [drivers/bcma/bcma.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 To prevent this, don't allow the host mode feature to be built if CONFIG_BCMA=m Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: improve RX packet handling in USB interfacePrameela Rani Garnepudi
Curretly, RX packet processing is done sequencially. To improve the efficiency, RX skb queue is introduced. Here, while preparing RX URB skb is allocated and used for RX buffer. When rx done handler is called, enqueue the skb to rx_q and set the thread event. RX thread is modified to dequeue packets from skb queue and process further. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: use dynamic RX control blocks instead of MAX_RX_URBPrameela Rani Garnepudi
Currently 2 RX control blocks are allocated by default. If wifi alone mode is used rx control block 2 is unusable. So, changes are done accordingly in all places to use RX control blocks dynamically based on coex mode check. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: improve RX handling in SDIO interfacePrameela Rani Garnepudi
Currently, RX packets are handled in interrupt context in SDIO interface. To improve the efficiency of processing RX packets, RX thread and RX skb queues are introduced. When the packet is read from device, driver prepares skb, add to RX queue and trigger RX thread event. RX thread processes the packets from RX queue. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: sdio changes to support BTPrameela Rani Garnepudi
Queue number is correctly updated for BT traffic. Also, kzalloc instead of kmalloc is used for Rx packet allocation. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: add module parameter operating modePrameela Rani Garnepudi
Operating mode determines the support for other protocols. This is made as module parameter for better usage. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: handle BT traffic in driverSiva Rebbagondla
BT frames are passed through coex and hal modules to BUS. After firmware is loaded, based on the operating mode CARD READY frame comes for each protocol. When BT card ready is received, BT attach is called. Protocol operations are exchanged between the modules at initialization time. Build flag CONFIG_RSI_COEX is introduced to enable coex support if CONFIG_BT_RSIHCI is enabled. Coex operations are valid if coex mode is greater than 1 only. Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13Bluetooth: btrsi: add new rsi bluetooth driverPrameela Rani Garnepudi
Redpine bluetooth driver is a thin driver which depends on 'rsi_91x' driver for transmitting and receiving packets to/from device. It creates hci interface when attach() is called from 'rsi_91x' module. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: add coex supportPrameela Rani Garnepudi
With BT support, driver has to handle two streams of data (i.e. wlan and BT). Actual coex implementation is in firmware. Coex module just schedule the packets to firmware by taking them from the corresponding paths. Structures for module and protocol operations are introduced for this purpose. Protocol operations structure is global structure which can be shared among different modules. Move initialization of coex and operating mode values to rsi_91x_init(). Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: add header file rsi_91xPrameela Rani Garnepudi
The common parameters used by wlan and bt modules are add to a new header file "rsi_91x.h" defined in 'include/net' Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: add bluetooth rx endpointSiva Rebbagondla
USB endpoint 1 is used for WLAN which is presently in use. USB endpoint 2 is introduced for BT Rx traffic. Enumeration of Rx BT endpoint and submitting Rx BT URB are added. >From /sys/kernel/debug/usb/devices, Ad=81(I) is for WLAN EP IN and Ad=01(O) is for Wlan EP OUT. Ad=82(I) is for BT EP IN and Ad=02(O) is for BT EP OUT. T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1618 ProdID=9113 Rev= 0.02 S: Manufacturer=Redpine Signals, Inc. S: Product=Wireless USB Network Module S: SerialNumber=000000000001 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 6 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13rsi: add rx control block to handle rx packets in USBPrameela Rani Garnepudi
Rx bluetooth endpoint shall be added in further patches. Rx control block is introduced here to handle Rx packets properly. Separate function is written to initialize the RX control blocks. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt7601u: let mac80211 validate rx CCMP PNLorenzo Bianconi
Apparently the hardware does not perform CCMP PN validation so let mac80211 take care of possible replay attacks in sw. Moreover indicate ICV and MIC had been stripped setting corresponding bits in ieee80211_rx_status. The fix has been validated using 4.2.1 and 4.1.3 tests from the WiFi Alliance vulnerability detection tool. Fixes: c869f77d6abb ("add mt7601u driver") Acked-by: Jakub Kicinski <kubakici@wp.pl> Tested-by: David Park <david.park@hitemengineering.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt7601u: simplify mt7601u_mcu_msg_alloc signatureLorenzo Bianconi
Remove mt7601u_dev parameter from mt7601u_mcu_msg_alloc signature since dev pointer is never used in routine body Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt76x2: remove unnecessary len variable in mt76x2_eeprom_load()Lorenzo Bianconi
Substitute unnecessary len variable in mt76x2_eeprom_load() with MT7662_EEPROM_SIZE macro since len is used just to store eeprom default size. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt7601u: remove a warning in mt7601u_efuse_physical_size_check()Lorenzo Bianconi
Fix the following sparse warning in mt7601u_efuse_physical_size_check: - drivers/net/wireless/mediatek/mt7601u/eeprom.c:77:27: warning: Variable length array is used Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt76x2: add mac80211 {set,get}_antenna callbacksLorenzo Bianconi
Add capability to select tx/rx antennas. Possible values are: - 1: to use only the first antenna - 2: to use only the second antenna - 3: to use both of them Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt76: add mt76_init_stream_cap routineLorenzo Bianconi
Add mt76_init_stream_cap utility routine to set ht/vht sta capabilities related to number of streams currently used by the device (it will be used by mac80211 set_antenna callback) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt76: initialize available_antennas_{tx,rx} infoLorenzo Bianconi
Initialize available_antennas related info in wiphy data structure according to antenna_mask field; antenna_mask info is initialized in device specific code and will be used in mac80211 {set,get}_antenna callbacks Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13usb: musb: Fix external abort in musb_remove on omap2430Merlijn Wajer
This fixes an oops on unbind / module unload (on the musb omap2430 platform). musb_remove function now calls musb_platform_exit before disabling runtime pm. Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-13cxgb4: Add HMA supportArjun Vynipadath
HMA(Host Memory Access) maps a part of host memory for T6-SO memfree cards. This commit does the following: - Query FW to check if we have HMA support. If yes, the params will return HMA size configured in FW. We will dma map memory based on this size. - Also contains changes to get HMA memory information via debugfs. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Michael Werner <werner@chelsio.com> Signed-off-by: Ganesh GR <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13qed: Use after free in qed_rdma_free()Dan Carpenter
We're dereferencing "p_hwfn->p_rdma_info" but that is freed on the line before in qed_rdma_resc_free(p_hwfn). Fixes: 9de506a547c0 ("qed: Free RoCE ILT Memory on rmmod qedr") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13efi/libstub/tpm: Initialize pointer variables to zero for mixed modeArd Biesheuvel
As reported by Jeremy Cline, running the new TPM libstub code in mixed mode (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking the TCG2 protocol, or when accessing the log_tbl pool allocation. The reason turns out to be that in both cases, the 64-bit pointer variables are not fully initialized by the 32-bit EFI code, and so we should take care to zero initialize these variables beforehand, or we'll end up dereferencing bogus pointers. Reported-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hdegoede@redhat.com Cc: jarkko.sakkinen@linux.intel.com Cc: javierm@redhat.com Cc: linux-efi@vger.kernel.org Cc: tweek@google.com Link: http://lkml.kernel.org/r/20180313140922.17266-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13ibmvnic: Fix recent errata commitThomas Falcon
Sorry, one of the patches I sent in an earlier series has some dumb mistakes. One was that I had changed the parameter for the errata workaround function but forgot to make that change in the code that called it. The second mistake was a forgotten return value at the end of the function in case the workaround was not needed. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13cpufreq: scmi: add thermal dependencyArnd Bergmann
A built-in scmi cpufreq driver cannot link against a modular thermal framework: drivers/cpufreq/scmi-cpufreq.o: In function `scmi_cpufreq_ready': scmi-cpufreq.c:(.text+0x40): undefined reference to `of_cpufreq_cooling_register' drivers/cpufreq/scmi-cpufreq.o: In function `scmi_cpufreq_exit': scmi-cpufreq.c:(.text+0x88): undefined reference to `cpufreq_cooling_unregister' This adds a Kconfig dependency that makes sure this configuration is not possible, while allowing all configurations that can work. Note that disabling CPU_THERMAL means we don't care about the THERMAL dependency. Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-13ibmvnic: Handle TSO backing device errataThomas Falcon
TSO packets with one segment or with an MSS less than 224 can cause errors on some backing devices, so disable GSO in those cases. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13ibmvnic: Pad small packets to minimum MTU sizeThomas Falcon
Some backing devices cannot handle small packets well, so pad any small packets to avoid that. It was recommended that the VNIC driver should not send packets smaller than the minimum MTU value provided by firmware, so pad small packets to be at least that long. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13ibmvnic: Account for VLAN header length in TX buffersThomas Falcon
The extra four bytes of a VLAN packet was throwing off TX buffer entry values used by the driver. Account for those bytes when in buffer size and buffer entry calculations Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13ibmvnic: Account for VLAN tag in L2 Header descriptorThomas Falcon
If a VLAN tag is present in the Ethernet header, account for that when providing the L2 header to firmware. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-13ipmi_ssif: Fix kernel panic at msg_done_handlerKamlakant Patel
This happens when BMC doesn't return any data and the code is trying to print the value of data[2]. Getting following crash: [ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address 00000002 [ 484.736496] pgd = ffff0000094a2000 [ 484.739885] [00000002] *pgd=00000047fcffe003, *pud=00000047fcffd003, *pmd=0000000000000000 [ 484.748158] Internal error: Oops: 96000005 [#1] SMP [...] [ 485.101451] Call trace: [...] [ 485.188473] [<ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif] [ 485.195249] [<ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif] [ 485.202038] [<ffff0000080f1430>] kthread+0x108/0x138 [ 485.206994] [<ffff0000080838e0>] ret_from_fork+0x10/0x30 [ 485.212294] Code: aa1903e1 aa1803e0 b900227f 95fef6a5 (39400aa3) Adding a check to validate the data len before printing data[2] to fix this issue. Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-03-13ipmi:pci: Blacklist a Realtek "IPMI" deviceCorey Minyard
Realtek has some sort of "Virtual" IPMI device on the PCI bus as a KCS controller, but whatever it is, it's not one. Ignore it if seen. Reported-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Daniel Drake <drake@endlessm.com>
2018-03-13power: reset: make function sc27xx_poweroff_shutdown staticColin Ian King
The function sc27xx_poweroff_shutdown is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/power/reset/sc27xx-poweroff.c:28:6: warning: symbol 'sc27xx_poweroff_shutdown' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-13drm/meson: Add support for DMT modes on HDMINeil Armstrong
This patch adds support for DMT display modes over HDMI. The modes timings configurations are from the Amlogic Vendor linux tree and tested over multiples monitors. Previously only a selected number of CEA modes were supported. Only these following modes are supported with these changes: - 640x480@60Hz - 800x600@60Hz - 1024x768@60Hz - 1152x864@75Hz - 1280x1024@60Hz - 1600x1200@60Hz - 1920x1080@60Hz The associated code to handle the clock rates is also added. Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520935670-14187-1-git-send-email-narmstrong@baylibre.com
2018-03-13drm/meson: Fix some error handling paths in 'meson_drv_bind_master()'Christophe JAILLET
If one of these functions fail, we whould free 'drm', as alreadry done in the other error handling paths, below and above. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/df47e03d36c2cf7bc37ec3105fc47c16555bd946.1520885192.git.christophe.jaillet@wanadoo.fr
2018-03-13drm/meson: Use drm_dev_put() instead of drm_dev_unref()Christophe JAILLET
According to 'drivers/gpu/drm/drm_drv.c', 'drm_dev_unref()' is just a compatibility alias for 'drm_dev_put()'. So use the latter instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/d4ce46077d3ada7149c4555acfdda8ade4a6cf50.1520885192.git.christophe.jaillet@wanadoo.fr
2018-03-13drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()'Christophe JAILLET
'drm_vblank_init()' can fail. So handle this (unlikely) error. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/6cbf3d70ac3904489c7194c895225c4103aebb96.1520885192.git.christophe.jaillet@wanadoo.fr
2018-03-13Revert "ACPI: battery: Add the ThinkPad "Not Charging" quirk"Rafael J. Wysocki
Revert commit 91eea70e5e5c (ACPI: battery: Add the ThinkPad "Not Charging" quirk) as it is reported to cause user space to misbehave. That appears to be due to bugs in user space, so this commit will go in again after the bugs have been fixed and the fixes have been delivered to users. Link: https://marc.info/?l=linux-acpi&m=152089585129589&w=2 Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-13usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resumeRoger Quadros
In the following test we get stuck by sleeping forever in _dwc3_set_mode() after which dual-role switching doesn't work. On dra7-evm's dual-role port, - Load g_zero gadget driver and enumerate to host - suspend to mem - disconnect USB cable to host and connect otg cable with Pen drive in it. - resume system - we sleep indefinitely in _dwc3_set_mode due to. dwc3_gadget_exit()->usb_del_gadget_udc()->udc_stop()-> dwc3_gadget_stop()->wait_event_lock_irq() To fix this instead of waiting indefinitely with wait_event_lock_irq() we use wait_event_interruptible_lock_irq_timeout() and print and error message if there was a timeout. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Make dwc2_force_mode() staticGrigor Tovmasyan
Declared dwc2_force_mode() function as static, because it was used only in core.c file, for fixing sparse error. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: add support for host mode external vbus supplyAmelie Delaunay
This patch adds a way to enable an external vbus supply in host mode, when dwc2 drvvbus signal is not used. This patch is very similar to the one done in U-Boot dwc2 driver [1]. It also adds dynamic vbus supply management depending on the role and state of the core. [1] https://lists.denx.de/pipermail/u-boot/2017-March/283434.html Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Force mode optimizationsVardan Mikayelyan
If the dr_mode is USB_DR_MODE_OTG, forcing the mode is needed during driver probe to get the host and device specific HW parameters. Then we clear the force mode bits so that the core operates in OTG mode. The force mode bits should not be touched at any other time during the driver lifetime and they should be preserved whenever the GUSBCFG register is written to. The force mode bit values will persist across soft resets of the core. If the dr_mode is either USB_DR_MODE_HOST or USB_DR_MODE_PERIPHERAL, the force mode is set just once at probe to configure the core as either a host or peripheral. Given the above, we no longer need any other reset delays, force delays, or any forced modes anywhere else in the driver. So replace all calls to dwc2_core_reset_and_force_dr_mode() with dwc2_core_reset() and remove all other unnecessary delays. Also remove the dwc2_force_mode_if_needed() function since the "if needed" part is already taken care of by the polling in dwc2_force_mode(). Finally, remove all other calls to dwc2_clear_force_mode(). Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Enable power downJohn Youn
Enable the power down option based on the core capability. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Change hub-control to allow hibernationVardan Mikayelyan
Affected cases: ClearPortFeature's USB_PORT_FEAT_SUSPEND SetPortFeature's USB_PORT_FEAT_SUSPEND USB_PORT_FEAT_RESET Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Add dwc2_handle_gpwrdn_intr() handlerVardan Mikayelyan
The GPWRDN interrupts are those that occur in both Host and Device mode while core is in hibernated state. Export dwc2_core_init to be able to use it in GPWRDN_IDSTS interrupt handler. Here we have duplicated init functions in host and gadget sides so I have left things as it was(used corresponing functions for host and gadget), maybe in the future we'll resolve this problem and will use dwc2_core_init for both sides. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Allow entering hibernation from USB_SUSPEND interruptVardan Mikayelyan
Do changes to allow entering hibernated state from USB_SUSPEND interrupt. All code is added under if conditions and mustn't impact existing functionality. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Add dwc2_enter_hibernation(), dwc2_exit_hibernation()Vardan Mikayelyan
These are wrapper functions which are calling device or host enter/exit hibernation functions. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Add host/device hibernation functionsVardan Mikayelyan
Add host/device hibernation functions which must be wrapped by core's dwc2_enter_hibernation()/dwc2_exit_hibernation() functions. Make dwc2_backup_global_registers dwc2_restore_global_register non-static to use them in both host/gadget sides. Added function names: dwc2_gadget_enter_hibernation() dwc2_gadget_exit_hibernation() dwc2_host_enter_hibernation() dwc2_host_exit_hibernation() Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Add helper functions for restore routineVardan Mikayelyan
Add common (host/device) helper functions, which will be called while exiting from hibernation, from both sides. dwc2_restore_essential_regs() dwc2_hib_restore_common() Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-10-02 15:13:57 +0000