summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-03-29wcn36xx: dequeue all pending indicator messagesDaniel Mack
In case wcn36xx_smd_rsp_process() is called more than once before hal_ind_work was dispatched, the messages will end up in hal_ind_queue, but wcn36xx_ind_smd_work() will only look at the first message in that list. Fix this by dequeing the messages from the list in a loop, and only stop when it's empty. This issue was found during a review of the driver. In my tests, that race never actually occured. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29wcn36xx: Fix firmware crash due to corrupted buffer addressLoic Poulain
wcn36xx_start_tx function retrieves the buffer descriptor from the channel control queue to start filling tx buffer information. However, nothing prevents this same buffer to be concurrently accessed in a concurent tx call, leading to potential buffer coruption and firmware crash (observed during iperf test). The channel control queue should only be accessed and updated with the channel lock. Fix this issue by using a local buffer descriptor which will be copied in the thread-safe wcn36xx_dxe_tx_frame. Note that buffer descriptor size is few bytes so the introduced copy overhead is insignificant. Moreover, this allows to keep the locked section minimal. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29wcn36xx: turn off probe response offloadingRamon Fried
It appears that the WCN36xx firmware doesn't actually respond to probe requests. Until it's resolved, switch the probe response responsibility to the 802.11 layer to allow creation of hidden SSID AP's. Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: add memory dump support QCA9984Anilkumar Kolli
QCA9984/QCA99X0/QCA4019 chipsets have 8 memory regions, dump all of them to the firmware coredump file. Some of the regions need to be read using ioread() so add new region types for them. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> [kvalo: refactoring etc] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: refactor ath10k_pci_dump_memory() in preparation for QCA9984 supportKalle Valo
As QCA9984 needs two region types refactor the code to make it easier add the new types. No functional changes. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: suppress "Unknown eventid: 36925" warningsSathishkumar Muruganandam
FW has Smart Logging feature enabled by default for detecting failures and processing FATAL_CONDITION_EVENTID (36925 - 0x903D) back to host. Since ath10k doesn't implement the Smart Logging and FATAL CONDITION EVENT processing yet, suppressing the unknown event ID warning by moving this under ATH10K_DBG_WMI. Simulated the same issue by having associated STA powered off when ping flood was running from AP backbone. This triggerd STA KICKOUT in AP followed by FATAL CONDITION event 36925. Issue was reproduced and verified in below DUT ------------------------------------------------ AP mode of OpenWRT QCA9984 running 6.0.8 with FW ver 10.4-3.5.3-00053 Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: add FW API 6 firmware image for QCA9377Ryan Hsu
Firmware WLAN.TF.2.1-00014-QCARMSWP-1 now supports reading the board ID information and also required 9 IRAM bank, which older ath10k version don't have the support will fail to be enabled, so in order to maintain the backward compatibility, we need to update the FW API to 6. Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath10k: enable QCA6174/QCA9377 to read the chip temperatureRyan Hsu
The firmware of QCA6174/QCA9377 already support the feature, just enable it to be able to handle the get_temperature command and process the event. You can read the temperature by using the hwmon interface, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Verified with the following hardware and software combination, QCA6174, only firmware-4.bin doesn't support this, otherwise all support. QCA9377, all the firmwares upstreamed support this command Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29Revert "ath10k: send (re)assoc peer command when NSS changed"Karthikeyan Periyasamy
This reverts commit 55884c045d31a29cf69db8332d1064a1b61dd159. When Ath10k is in AP mode and an unassociated STA sends a VHT action frame (Operating Mode Notification for the NSS change) periodically to AP this causes ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during NSS update. Over the time (with a certain client it can happen within 15 mins when there are over 500 of these VHT action frames) continuous calls of WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust. To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS updates and no need to call ath10k_station_assoc(). So revert the original commit from 2014 as it's unclear why the change was really needed. Now the firmware assert doesn't happen anymore. Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053. This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and QCA988x platform with firmware version: 10.2.4-1.0-00036. Firmware Assert log: ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c) ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1 ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386 ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344 ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0002:01:00.0: firmware register dump: ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31 ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60 ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000 ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2 ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000 ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34 ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4 ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4 ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00 ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000 ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000 ath10k_pci 0002:01:00.0: Copy Engine register dump: ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx: ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3 ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213 ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21 ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25 ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104 ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156 ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12 ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1 ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0 ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1 ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0 ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather: ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0 ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0 ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0 ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0 ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0 ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0 ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0 ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0 ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0 ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0 ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0 ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0 ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0 ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath9k: fix DFS detector synchronizationTimothy Redaelli
some userspace programs (e.g. hostapd) need to set the regulatory domain before selecting the operating channel. Synchronize DFS detector regardless of the value of ah->curchan, to avoid situations where wireless scan can't be done on some 5GHz sub-bands, because dfs_region is constantly UNSET. Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Timothy Redaelli <tredaelli@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29USB: serial: ftdi_sio: add Id for Physik Instrumente E-870Teichmann, Martin
This adds support for the Physik Instrumente E-870 PIShift Drive Electronics, a Piezo motor driver. Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-03-29mtd: fsl-quadspi: Remove unneeded driver.bus assignmentBoris Brezillon
platform_driver_register() takes care of assigning driver->bus to &platform_bus_type, no need to explicitly assign it in the driver. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2018-03-29mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clkBoris Brezillon
The core clock field was badly named ->ecc_clk which might lead to some confusion. Rename it ->core_clk. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-03-29mtd: rawnand: s3c2410: enhance the probe function error pathMiquel Raynal
Prepare the migration of the lpc32xx_slc driver to use nand_scan() by cleaning the error path in the probe function. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: tango: fix probe function error pathMiquel Raynal
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: sh_flctl: fix the probe function error pathMiquel Raynal
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: omap2: fix the probe function error pathMiquel Raynal
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: mxc: fix probe function error pathMiquel Raynal
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: denali: fix probe function error pathMiquel Raynal
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: davinci: fix probe function error pathMiquel Raynal
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: cafe: fix probe function error pathMiquel Raynal
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: brcmnand: fix probe function error pathMiquel Raynal
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME modeBoris Brezillon
This mode is not used by any existing setup and should not be used because it overwrites the BBMs. Let's just remove it before someone starts using it. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-03-29mtd: rawnand: marvell: Fix clock resource by adding a register clockGregory CLEMENT
On Armada 7K/8K we need to explicitly enable the register clock. This clock is optional because not all the SoCs using this IP need it but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updated accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: ftl: Use DIV_ROUND_UP()Arushi Singhal
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: Fix some function description mismatches in mtdcore.cXiaolei Li
In mtdcore.c, some function descriptions do not match function definitions. Just fix these mismatches. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: physmap_of: update struct map_info's swap as per map requirementPrabhakar Kushwaha
It is not necessary for all device's maps to be CFI_HOST_ENDIAN. Maps device can be Big endian or little endian. Currently it is being taken care using CONFIG_MTD_CFI_LE_BYTE_SWAP or CONFIG_MTD_CFI_BE_BYTE_SWAP i.e. compile time. Now update struct map_info's swap field based on device characteristics defined in device tree. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: update documentation of mtd_device_parse_register()Rafał Miłecki
In the commit 2c77c57d22adb ("mtd: move code adding master MTD out of mtd_add_device_partitions()") behavior of mtd_device_parse_register() has very slightly changed. It's a pretty non-significant order change to match updated function behavior. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: jedec_probe: add Eon EN29LV400A IDsLinus Walleij
This adds the JEDEC IDs for Eon EN29LV400A variants EN29LV400AB and EN29LV400AT. This chip is found in the D-Link DNS-313. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-28RDMA/CMA: Add rdma_port_space to UAPISteve Wise
Since the rdma_port_space enum is being passed between user and kernel for user cm_id setup, we need it in a UAPI header. So add it to rdma_user_cm.h. This also fixes the cm_id restrack changes which pass up the port space value via the RDMA_NLDEV_ATTR_RES_PS attribute. Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-28nfp: bpf: improve wrong FW response warningsJakub Kicinski
When FW responds with a message of wrong size or type make sure the type is checked first and included in the wrong size message. This makes it easier to figure out which FW command failed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add support for bpf_get_prandom_u32()Jakub Kicinski
NFP has a prng register, which we can read to obtain a u32 worth of pseudo random data. Generate code for it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add support for atomic add of unknown valuesJakub Kicinski
Allow atomic add to be used even when the value is not guaranteed to fit into a 16 bit immediate. This requires the value to be pulled as data, and therefore use of a transfer register and a context swap. Track the information about possible lengths of the value, if it's guaranteed to be larger than 16bits don't generate the code for the optimized case at all. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: expose command delay slotsJakub Kicinski
Allow callers to control the delay slots of commands, instead of giving them just a wait/nowait choice. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add basic support for atomic addsJakub Kicinski
Implement atomic add operation for 32 and 64 bit values. Depend on the verifier to ensure alignment. Values have to be kept in big endian and swapped upon read/write. For now only support atomic add of a constant. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add map deletes from the datapathJakub Kicinski
Support calling map_delete_elem() FW helper from the datapath programs. For JIT checks and code are basically equivalent to map lookups. Similarly to other map helper key must be on the stack. Different pointer types are left for future extension. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add map updates from the datapathJakub Kicinski
Support calling map_update_elem() from the datapath programs by calling into FW-provided helper. Value pointer is passed in LM pointer #2. Keeping track of old state for arg3 is not necessary, since LM pointer #2 will be always loaded in this case, the trivial optimization for value at the bottom of the stack can't be done here. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add helper for basic map call checksJakub Kicinski
Add a verifier helper for performing the basic state checks before a call to a map helper. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add helper for validating stack pointersJakub Kicinski
Our implementation has restriction on stack pointers for function calls. Move the common checks into a helper for reuse. The state has to be encapsulated into a structure to support parameters other than BPF_REG_2. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: rename map_lookup_stack() to map_call_stack_common()Jakub Kicinski
We will reuse most of map call code gen for other map calls. Rename the lookup gen function and use meta->func_id instead of hard-coding lookup. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: detect packet reads could be cached, enable the optimisationJiong Wang
This patch is the front end of this optimisation, it detects and marks those packet reads that could be cached. Then the optimisation "backend" will be activated automatically. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: support unaligned read offsetJiong Wang
This patch add the support for unaligned read offset, i.e. the read offset to the start of packet cache area is not aligned to REG_WIDTH. In this case, the read area might across maximum three transfer-in registers. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: read from packet data cache for PTR_TO_PACKETJiong Wang
This patch assumes there is a packet data cache, and would try to read packet data from the cache instead of from memory. This patch only implements the optimisation "backend", it doesn't build the packet data cache, so this optimisation is not enabled. This patch has only enabled aligned packet data read, i.e. when the read offset to the start of cache is REG_WIDTH aligned. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28Merge tag 'drm-fixes-for-v4.16-rc8' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nothing serious, two amdkfd and two tegra fixes" * tag 'drm-fixes-for-v4.16-rc8' of git://people.freedesktop.org/~airlied/linux: drm/tegra: dc: Using NULL instead of plain integer drm/amdkfd: Deallocate SDMA queues correctly drm/amdkfd: Fix scratch memory with HWS enabled drm/tegra: dc: Use correct format array for Tegra124
2018-03-29Merge tag 'drm/tegra/for-4.16-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v4.16 This contains two small fixes, one which fixes a typo that causes a crash with the new framebuffer modifier query support and another that fixes a build warning. * tag 'drm/tegra/for-4.16-fixes' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: dc: Using NULL instead of plain integer drm/tegra: dc: Use correct format array for Tegra124
2018-03-29Merge branch 'drm-misc-next-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next - Mask mode type garbage from userspace (Ville) Something went wrong on the misc tree side, but I'll pull the patch directly. * 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc: drm: Fix uabi regression by allowing garbage mode->type from userspace
2018-03-28RDMA/ucma: Introduce safer rdma_addr_size() variantsRoland Dreier
There are several places in the ucma ABI where userspace can pass in a sockaddr but set the address family to AF_IB. When that happens, rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6, and the ucma kernel code might end up copying past the end of a buffer not sized for a struct sockaddr_ib. Fix this by introducing new variants int rdma_addr_size_in6(struct sockaddr_in6 *addr); int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr); that are type-safe for the types used in the ucma ABI and return 0 if the size computed is bigger than the size of the type passed in. We can use these new variants to check what size userspace has passed in before copying any addresses. Reported-by: <syzbot+6800425d54ed3ed8135d@syzkaller.appspotmail.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-28net/wireless/iwlwifi: fix iwlwifi_dev_ucode_error tracepointAlexei Starovoitov
fix iwlwifi_dev_ucode_error tracepoint to pass pointer to a table instead of all 17 arguments by value. dvm/main.c and mvm/utils.c have 'struct iwl_error_event_table' defined with very similar yet subtly different fields and offsets. tracepoint is still common and using definition of 'struct iwl_error_event_table' from dvm/commands.h while copying fields. Long term this tracepoint probably should be split into two. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-28net/mediatek: disambiguate mt76 vs mt7601u trace eventsAlexei Starovoitov
two trace events defined with the same name and both unused. They conflict in allyesconfig build. Rename one of them. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-28treewide: remove large struct-pass-by-value from tracepoint argumentsAlexei Starovoitov
- fix trace_hfi1_ctxt_info() to pass large struct by reference instead of by value - convert 'type array[]' tracepoint arguments into 'type *array', since compiler will warn that sizeof('type array[]') == sizeof('type *array') and later should be used instead The CAST_TO_U64 macro in the later patch will enforce that tracepoint arguments can only be integers, pointers, or less than 8 byte structures. Larger structures should be passed by reference. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit (git 2.34.1) at 2025-09-21 10:26:10 +0000