| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Interestingly the recent kmemleak improvements allowed our CI to catch
a couple of percpu leaks addressed here.
We (mostly Jakub, to be accurate) are working to increase review
coverage over the net code-base tweaking the MAINTAINER entries.
Current release - regressions:
- core: harmonize tstats and dstats
- ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels
- eth: tun: revert fix group permission check
- eth: stmmac: revert "specify hardware capability value when FIFO
size isn't specified"
Previous releases - regressions:
- udp: gso: do not drop small packets when PMTU reduces
- rxrpc: fix race in call state changing vs recvmsg()
- eth: ice: fix Rx data path for heavy 9k MTU traffic
- eth: vmxnet3: fix tx queue race condition with XDP
Previous releases - always broken:
- sched: pfifo_tail_enqueue: drop new packet when sch->limit == 0
- ethtool: ntuple: fix rss + ring_cookie check
- rxrpc: fix the rxrpc_connection attend queue handling
Misc:
- recognize Kuniyuki Iwashima as a maintainer"
* tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: stmmac: Specify hardware capability value when FIFO size isn't specified"
MAINTAINERS: add a sample ethtool section entry
MAINTAINERS: add entry for ethtool
rxrpc: Fix race in call state changing vs recvmsg()
rxrpc: Fix call state set to not include the SERVER_SECURING state
net: sched: Fix truncation of offloaded action statistics
tun: revert fix group permission check
selftests/tc-testing: Add a test case for qdisc_tree_reduce_backlog()
netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()
selftests/tc-testing: Add a test case for pfifo_head_drop qdisc when limit==0
pfifo_tail_enqueue: Drop new packet when sch->limit == 0
selftests: mptcp: connect: -f: no reconnect
net: rose: lock the socket in rose_bind()
net: atlantic: fix warning during hot unplug
rxrpc: Fix the rxrpc_connection attend queue handling
net: harmonize tstats and dstats
selftests: drv-net: rss_ctx: don't fail reconfigure test if queue offset not supported
selftests: drv-net: rss_ctx: add missing cleanup in queue reconfigure
ethtool: ntuple: fix rss + ring_cookie check
ethtool: rss: fix hiding unsupported fields in dumps
...
|
|
When we reenable TPH after changing a Steering Tag value, we need the
actual TPH Requester Enable value, not the ST Mode (which only happens to
work out by chance for non-extended TPH in interrupt vector mode).
Link: https://lore.kernel.org/r/13118098116d7bce07aa20b8c52e28c7d1847246.1738759933.git.robin.murphy@arm.com
Fixes: d2e8a34876ce ("PCI/TPH: Add Steering Tag support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wei Huang <wei.huang2@amd.com>
|
|
Commit 1db806ec06b7 ("PCI/ASPM: Save parent L1SS config in
pci_save_aspm_l1ss_state()") aimed to perform L1SS config save for both the
Upstream Port and its upstream bridge when handling an Upstream Port, which
matches what the L1SS restore side does. However, parent->state_saved can
be set true at an earlier time when the upstream bridge saved other parts
of its state. Then later when attempting to save the L1SS config while
handling the Upstream Port, parent->state_saved is true in
pci_save_aspm_l1ss_state() resulting in early return and skipping saving
bridge's L1SS config because it is assumed to be already saved. Later on
restore, junk is written into L1SS config which causes issues with some
devices.
Remove parent->state_saved check and unconditionally save L1SS config also
for the upstream bridge from an Upstream Port which ought to be harmless
from correctness point of view. With the Upstream Port check now present,
saving the L1SS config more than once for the bridge is no longer a problem
(unlike when the parent->state_saved check got introduced into the fix
during its development).
Link: https://lore.kernel.org/r/20250131152913.2507-1-ilpo.jarvinen@linux.intel.com
Fixes: 1db806ec06b7 ("PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219731
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported by: Rafael J. Wysocki <rafael@kernel.org>
Closes: https://lore.kernel.org/r/CAJZ5v0iKmynOQ5vKSQbg1J_FmavwZE-nRONovOZ0mpMVauheWg@mail.gmail.com
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/d7246feb-4f3f-4d0c-bb64-89566b170671@molgen.mpg.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360
|
|
The find_preferred_mode() functions takes the mode_config mutex, but due
to the order most tests have, is called with the crtc_ww_class_mutex
taken. This raises a warning for a circular dependency when running the
tests with lockdep.
Reorder the tests to call find_preferred_mode before the acquire context
has been created to avoid the issue.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-4-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The tests all deviate slightly in how they assign their local pointers
to DRM entities. This makes refactoring pretty difficult, so let's just
move the assignment as soon as the entities are allocated.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-3-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Some tests have the drm pointer assigned multiple times to the same
value. Drop the redundant assignments.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-2-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The light_up_connector helper function in the HDMI infrastructure unit
tests uses drm_atomic_set_crtc_for_connector(), but fails when it
returns an error.
This function can return EDEADLK though if the sequence needs to be
restarted, and WW_MUTEX_SLOWPATH is meant to test that we handle it
properly.
Let's handle EDEADLK and restart the sequence in our tests as well.
Fixes: eb66d34d793e ("drm/tests: Add output bpc tests")
Reported-by: Dave Airlie <airlied@gmail.com>
Closes: https://lore.kernel.org/r/CAPM=9tzJ4-ERDxvuwrCyUPY0=+P44orhp1kLWVGL7MCfpQjMEQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20241031091558.2435850-1-mripard@kernel.org
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-1-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
When there is no dummy cycle in the spi-nor commands, both dummy bus cycle
bytes and width are zero. Because of the cpu's warning when divided by
zero, the warning should be avoided. Return just zero to avoid such
calculations.
Fixes: 1b74dd64c861 ("spi: Add Socionext F_OSPI SPI flash controller driver")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://patch.msgid.link/20250206085747.3834148-1-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
specified"
This reverts commit 8865d22656b4, which caused breakage for platforms
which are not using xgmac2 or gmac4. Only these two cores have the
capability of providing the FIFO sizes from hardware capability fields
(which are provided in priv->dma_cap.[tr]x_fifo_size.)
All other cores can not, which results in these two fields containing
zero. We also have platforms that do not provide a value in
priv->plat->[tr]x_fifo_size, resulting in these also being zero.
This causes the new tests introduced by the reverted commit to fail,
and produce e.g.:
stmmaceth f0804000.eth: Can't specify Rx FIFO size
An example of such a platform which fails is QEMU's npcm750-evb.
This uses dwmac1000 which, as noted above, does not have the capability
to provide the FIFO sizes from hardware.
Therefore, revert the commit to maintain compatibility with the way
the driver used to work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/4e98f967-f636-46fb-9eca-d383b9495b86@roeck-us.net
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Steven Price <steven.price@arm.com>
Fixes: 8865d22656b4 ("net: stmmac: Specify hardware capability value when FIFO size isn't specified")
Link: https://patch.msgid.link/E1tfeyR-003YGJ-Gb@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")
unconditionally switched to printing hex values in
pinconf_generic_dump_one(). However, if a dump format is registered for the
dumped pin, the hex value is printed as well. This hex value does not
necessarily correspond 1:1 with the hardware register value (as noted by
commit 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")). As a
result, user-facing output may include information like:
output drive strength (0x100 uA).
To address this, check if a dump format is registered for the dumped
property, and print the unsigned value instead when applicable.
Fixes: 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/20250205101058.2034860-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Merge the few remaining patches stuck into drm-misc-next-fixes.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 3ca459eaba1bf96a8c7878de84fa8872259a01e3.
The blamed commit caused a regression when neither tun->owner nor
tun->group is set. This is intended to be allowed, but now requires
CAP_NET_ADMIN.
Discussion in the referenced thread pointed out that the original
issue that prompted this patch can be resolved in userspace.
The relaxed access control may also make a device accessible when it
previously wasn't, while existing users may depend on it to not be.
This is a clean pure git revert, except for fixing the indentation on
the gid_valid line that checkpatch correctly flagged.
Fixes: 3ca459eaba1b ("tun: fix group permission check")
Link: https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Stas Sergeev <stsp2@yandex.ru>
Link: https://patch.msgid.link/20250204161015.739430-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM
handler and context") added unnecessary strict handler address checks,
causing the PRM module to fail in translating memory error addresses.
Both static data buffer address and ACPI parameter buffer address may
be NULL if they are not needed, as described in section 4.1.2 PRM Handler
Information Structure of Platform Runtime Mechanism specification [1].
Here are two examples from real hardware:
----PRMT.dsl----
- staic data address is not used
[10Ch 0268 2] Revision : 0000
[10Eh 0270 2] Length : 002C
[110h 0272 16] Handler GUID : F6A58D47-E04F-4F5A-86B8-2A50D4AA109B
[120h 0288 8] Handler address : 0000000065CE51F4
[128h 0296 8] Satic Data Address : 0000000000000000
[130h 0304 8] ACPI Parameter Address : 000000006522A718
- ACPI parameter address is not used
[1B0h 0432 2] Revision : 0000
[1B2h 0434 2] Length : 002C
[1B4h 0436 16] Handler GUID : 657E8AE6-A8FC-4877-BB28-42E7DE1899A5
[1C4h 0452 8] Handler address : 0000000065C567C8
[1CCh 0460 8] Satic Data Address : 000000006113FB98
[1D4h 0468 8] ACPI Parameter Address : 0000000000000000
Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context")
Reported-and-tested-by: Shi Liu <aurelianliu@tencent.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Reviewed-by: Koba Ko <kobak@nvidia.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20250126022250.3014210-1-aubrey.li@linux.intel.com
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Eluktronics MECH-17 (GM7RG7N) needs IRQ overriding for the
keyboard to work.
Adding a DMI_MATCH entry for this laptop model makes the internal
keyboard function normally.
Signed-off-by: Gannon Kolding <gannon.kolding@gmail.com>
Link: https://patch.msgid.link/20250127093902.328361-1-gannon.kolding@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While analysing code for software and OF node for the corner case when
caller asks to read zero items in the supposed to be an array of values
I found that ACPI behaves differently to what OF does, i.e.
1. It returns -EINVAL when caller asks to read zero items from integer
array, while OF returns 0, if no other errors happened.
2. It returns -EINVAL when caller asks to read zero items from string
array, while OF returns -ENODATA, if no other errors happened.
Amend ACPI implementation to follow what OF does.
Fixes: b31384fa5de3 ("Driver core: Unified device properties interface for platform firmware")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250203194629.3731895-1-andriy.shevchenko@linux.intel.com
[ rjw: Added empty line after a conditional ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Ensure cpufreq_driver->set_boost is non-NULL before using it in
cpufreq_online() to prevent a potential NULL pointer dereference.
Reported-by: Gautam Menghani <gautam@linux.ibm.com>
Closes: https://lore.kernel.org/all/c9e56c5f54cc33338762c94e9bed7b5a0d5de812.camel@linux.ibm.com/
Fixes: dd016f379ebc ("cpufreq: Introduce a more generic way to set default per-policy boost flag")
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/20250205181347.2079272-1-aboorvad@linux.ibm.com
[ rjw: Minor edits in the subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Compile-testing without CONFIG_OF leads to a harmless build warning:
drivers/cpufreq/airoha-cpufreq.c:109:34: error: 'airoha_cpufreq_match_list' defined but not used [-Werror=unused-const-variable=]
109 | static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
It would be possible to mark the variable as __maybe_unused to shut up
that warning, but a Kconfig dependency seems more appropriate as this still
allows build testing in allmodconfig and randconfig builds on all
architectures.
An earlier commit, b865a8404642 ("cpufreq: airoha: Depends on OF"),
tried to fix it incorrectly. ARCH_AIROHA already requires CONFIG_OF, so
this change does nothing, and the dependency is still missing for the
COMPILE_TEST case.
Fix it properly.
Fixes: 84cf9e541ccc ("cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver")
Fixes: b865a8404642 ("cpufreq: airoha: Depends on OF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: updated commit log and fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d51d2710061dfa7f2568287c6ed125b858b7318.1738580005.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Passing 0 as the step only works when there are other reasons to break
out of the BPP loop in intel_dp_mtp_tu_compute_config(). Otherwise, an
infinite loop might occur. Fix it by explicitly checking for 0 step.
Fixes: ef0a0757bbea ("drm/i915/dp: compute config for 128b/132b SST w/o DSC")
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: https://lore.kernel.org/r/Z6I0knh2Kt5T0JrT@ideak-desk.fi.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204154925.3001781-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a40e718d34d3d02c781c295466b013415f68c4f1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In adjust_perf() callback, we are setting the max_perf to highest_perf,
as opposed to the correct limit value i.e. max_limit_perf. Fix that.
Fixes: 3f7b835fa4d0 ("cpufreq/amd-pstate: Move limit updating code")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-3-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Scope based guard/cleanup macros should not be used together with goto
labels. Hence, remove the goto label.
Fixes: 6c093d5a5b73 ("cpufreq/amd-pstate: convert mutex use to guard()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-2-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
While the Aeroflex Gaisler GRGPIO driver has no build-time dependency on
gpiolib-of, it supports only DT-based configuration, and is used only on
DT systems. Hence add a dependency on OF, to prevent asking the user
about this driver when configuring a kernel without DT support.
Fixes: bc40668def384256 ("gpio: grgpio: drop Kconfig dependency on OF_GPIO")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/db6da3d11bf850d89f199e5c740d8f133e38078d.1738760539.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Depending on the user config, the leaf entry may be the hog directory,
not line. Check it and lock the correct item.
Fixes: 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on")
Tested-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250203110123.87701-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 56a50667cbcfaf95eea9128d5676af94e54b51a8. Mux
handling is not sufficiently implemented. It needs more time.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
clients"
This reverts commit 3cfe39b3a845593a485ab1c716615979004ef9f6. Mux
handling is not sufficiently implemented. It needs more time.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add kfree() for "d->main_status_buf" to the error-handling path to prevent
a memory leak.
Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20250205004343.14413-1-jiashengjiangcool@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit
a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1")
Because it may cause system hang while connect with two edp panel.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, there are several files in drm/amd/display that aim to have a
higher -Wframe-larger-than value to avoid instances of that warning with
a lower value from the user's configuration. However, with the way that
it is currently implemented, it does not respect the user's request via
CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain
when new instances of the warning appear and break the build due to
CONFIG_WERROR.
Adjust the logic to switch from a hard coded -Wframe-larger-than value
to only using the value as a minimum clamp and deferring to the
requested value from CONFIG_FRAME_WARN if it is higher.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Firmware deinitialization performs MMIO accesses which are not
necessary if the device has already been removed. In some cases,
these accesses happen via readx_poll_timeout_atomic which ends up
timing out, resulting in a warning at hw_atl2_utils_fw.c:112:
[ 104.595913] Call Trace:
[ 104.595915] <TASK>
[ 104.595918] ? show_regs+0x6c/0x80
[ 104.595923] ? __warn+0x8d/0x150
[ 104.595925] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595934] ? report_bug+0x182/0x1b0
[ 104.595938] ? handle_bug+0x6e/0xb0
[ 104.595940] ? exc_invalid_op+0x18/0x80
[ 104.595942] ? asm_exc_invalid_op+0x1b/0x20
[ 104.595944] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595952] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595959] aq_nic_deinit.part.0+0xbd/0xf0 [atlantic]
[ 104.595964] aq_nic_deinit+0x17/0x30 [atlantic]
[ 104.595970] aq_ndev_close+0x2b/0x40 [atlantic]
[ 104.595975] __dev_close_many+0xad/0x160
[ 104.595978] dev_close_many+0x99/0x170
[ 104.595979] unregister_netdevice_many_notify+0x18b/0xb20
[ 104.595981] ? __call_rcu_common+0xcd/0x700
[ 104.595984] unregister_netdevice_queue+0xc6/0x110
[ 104.595986] unregister_netdev+0x1c/0x30
[ 104.595988] aq_pci_remove+0xb1/0xc0 [atlantic]
Fix this by skipping firmware deinitialization altogether if the
PCI device is no longer present.
Tested with an AQC113 attached via Thunderbolt by performing
repeated unplug cycles while traffic was running via iperf.
Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Jacob Moroni <mail@jakemoroni.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203143604.24930-3-mail@jakemoroni.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GPIO drivers with latch interrupt support (typically types starting
with PCAL) have interrupt status registers to determine which particular
inputs have caused an interrupt. Unfortunately there is no atomic
operation to read these registers and clear the interrupt. Clearing the
interrupt is done by reading the input registers.
The code was reading the interrupt status registers, and then reading
the input registers. If an input changed between these two events it was
lost.
The solution in this patch is to revert to the non-latch version of
code, i.e. remembering the previous input status, and looking for the
changes. This system results in no more I2C transfers, so is no slower.
The latch property of the device still means interrupts will still be
noticed if the input changes back to its initial state.
Fixes: 44896beae605 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606033102.2271916-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The commit 78b435c9044a ("spi: pxa2xx: Introduce __lpss_ssp_update_priv()
helper") broke speaker output on my ASUS UX5304MA laptop. The problem is
in inverted value that got written in the private register.
Simple bug, simple fix.
Fixes: 78b435c9044a ("spi: pxa2xx: Introduce __lpss_ssp_update_priv() helper")
Signed-off-by: Mark Lord <mlord@pobox.com>
Tested-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250204174506.149978-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE()
declaration to determine which firmware to include in the initramfs
when a driver is included in the initramfs.
As amdxdna doesn't declare any firmware this causes the driver to fail
to load with -ENOENT when in the initramfs. Add the missing declaration
for possible firmware.
Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Fixes: 8c9ff1b181ba ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ideapad-laptop: Pass a correct pointer to the driver data
- intel/ifs: Provide a link to the IFS test images
- intel/pmc: Use large enough type when decoding LTR value
* tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Update documentation with image download path
platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()
platform/x86: ideapad-laptop: pass a correct pointer to the driver data
|
|
Commit 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best
compressed bpp") tries to find the best compressed bpp for the
link. However, it iterates from max to min bpp on display 13+, and from
min to max on other platforms. This presumably leads to minimum
compressed bpp always being chosen on display 11-12.
Iterate from high to low on all platforms to actually use the best
possible compressed bpp.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com
(cherry picked from commit 56b0337d429356c3b9ecc36a03023c8cc856b196)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If ->iobase is set the default will be UPIO_PORT for ->iotype after
the uart_read_and_validate_port_properties() call. Hence no need
to assign that explicitly. Otherwise it will be UPIO_MEM.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If ->iobase is set the default will be UPIO_PORT for ->iotype after
the uart_read_and_validate_port_properties() call. Hence no need
to assign that explicitly. Otherwise it will be UPIO_MEM.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If ->iobase is set the default will be UPIO_PORT for ->iotype after
the uart_read_and_validate_port_properties() call. Hence no need
to assign that explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In order to make code robust against potential changes in the future
move ->iotype validation outside of switch in __uart_read_properties().
If any code will be added in between that might leave the ->iotype value
unknown the validation catches this up.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The documentation of the __uart_read_properties() states that
->iotype member is always altered after the function call, but
the code doesn't do that in the case when use_defaults == false
and the value of reg-io-width is unsupported. Make sure the code
follows the documentation.
Note, the current users of the uart_read_and_validate_port_properties()
will fail and the change doesn't affect their behaviour, neither
users of uart_read_port_properties() will be affected since the
alteration happens there even in the current code flow.
Fixes: e894b6005dce ("serial: port: Introduce a common helper to read properties")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the ->iotype is always assigned to the UPIO_MEM when
the respective property is not found. However, this will not
support the cases when user wants to have UPIO_PORT to be set
or preserved. Support this scenario by checking ->iobase value
and default the ->iotype respectively.
Fixes: 1117a6fdc7c1 ("serial: 8250_of: Switch to use uart_read_port_properties()")
Fixes: e894b6005dce ("serial: port: Introduce a common helper to read properties")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The logical meaning of the previous version is wrong due to a typo.
If the IRQ equals 0, no interrupt pin is available and polling mode
shall be used.
Additionally, this fix adds a check for IRQ < 0 to increase robustness,
because documentation still says that negative IRQ values cannot be
absolutely ruled-out.
Fixes: 104c1b9dde9d ("serial: sc16is7xx: Add polling mode if no IRQ pin is available")
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Maarten Brock <maarten.brock@sttls.nl>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250121071819.1346672-1-andre.werner@systec-electronic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory
regions that are 'cold plugged' at boot, i.e., hot pluggable memory that
is available from early boot, and described as system RAM by the
firmware.
Existing loaders and EFI applications running in the boot context will
happily use this memory for allocating data structures that cannot be
freed or moved at runtime, and this prevents the memory from being
unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute
should be tested, and memory annotated as such should be avoided for
such allocations.
In the EFI stub, there are a couple of occurrences where, instead of the
high-level AllocatePages() UEFI boot service, a low-level code sequence
is used that traverses the EFI memory map and carves out the requested
number of pages from a free region. This is needed, e.g., for allocating
as low as possible, or for allocating pages at random.
While AllocatePages() should presumably avoid special purpose memory and
cold plugged regions, this manual approach needs to incorporate this
logic itself, in order to prevent the kernel itself from ending up in a
hot unpluggable region, preventing it from being unplugged.
So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it
where appropriate.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The documentation previously listed the path to download In Field Scan
(IFS) test images as "TBD".
Update the documentation to include the correct image download
location. Also move the download link to the appropriate section within
the documentation.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20250131205315.1585663-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20250125095033.26188-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is currently no mechanism to return error from query responses.
Return the error and print the corresponding error message with it.
Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250118023808.24726-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In StorVSC, payload->range.len is used to indicate if this SCSI command
carries payload. This data is allocated as part of the private driver data
by the upper layer and may get passed to lower driver uninitialized.
For example, the SCSI error handling mid layer may send TEST_UNIT_READY or
REQUEST_SENSE while reusing the buffer from a failed command. The private
data section may have stale data from the previous command.
If the SCSI command doesn't carry payload, the driver may use this value as
is for communicating with host, resulting in possible corruption.
Fix this by always initializing this value.
Fixes: be0cf6ca301c ("scsi: storvsc: Set the tablesize based on the information given by the host")
Cc: stable@kernel.org
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1737601642-7759-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_blk_crypto_profile_init() registers a cleanup handler to run when
the associated (platform-) device is being released. For UFS, the
crypto private data and pointers are stored as part of the ufs_hba's
data structure 'struct ufs_hba::crypto_profile'. This structure is
allocated as part of the underlying ufshcd and therefore Scsi_host
allocation.
During driver release or during error handling in ufshcd_pltfrm_init(),
this structure is released as part of ufshcd_dealloc_host() before the
(platform-) device associated with the crypto call above is released.
Once this device is released, the crypto cleanup code will run, using
the just-released 'struct ufs_hba::crypto_profile'. This causes a
use-after-free situation:
Call trace:
kfree+0x60/0x2d8 (P)
kvfree+0x44/0x60
blk_crypto_profile_destroy_callback+0x28/0x70
devm_action_release+0x1c/0x30
release_nodes+0x6c/0x108
devres_release_all+0x98/0x100
device_unbind_cleanup+0x20/0x70
really_probe+0x218/0x2d0
In other words, the initialisation code flow is:
platform-device probe
ufshcd_pltfrm_init()
ufshcd_alloc_host()
scsi_host_alloc()
allocation of struct ufs_hba
creation of scsi-host devices
devm_blk_crypto_profile_init()
devm registration of cleanup handler using platform-device
and during error handling of ufshcd_pltfrm_init() or during driver
removal:
ufshcd_dealloc_host()
scsi_host_put()
put_device(scsi-host)
release of struct ufs_hba
put_device(platform-device)
crypto cleanup handler
To fix this use-after free, change ufshcd_alloc_host() to register a
devres action to automatically cleanup the underlying SCSI device on
ufshcd destruction, without requiring explicit calls to
ufshcd_dealloc_host(). This way:
* the crypto profile and all other ufs_hba-owned resources are
destroyed before SCSI (as they've been registered after)
* a memleak is plugged in tc-dwc-g210-pci.c remove() as a
side-effect
* EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as
it's not needed anymore
* no future drivers using ufshcd_alloc_host() could ever forget
adding the cleanup
Fixes: cb77cb5abe1f ("blk-crypto: rename blk_keyslot_manager to blk_crypto_profile")
Fixes: d76d9d7d1009 ("scsi: ufs: use devm_blk_ksm_init()")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250124-ufshcd-fix-v4-1-c5d0144aae59@linaro.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fail I/Os instead of retry to prevent user space processes from being
blocked on the I/O completion for several minutes.
Retrying I/Os during "depopulation in progress" or "depopulation restore in
progress" results in a continuous retry loop until the depopulation
completes or until the I/O retry loop is aborted due to a timeout by the
scsi_cmd_runtime_exceeced().
Depopulation is slow and can take 24+ hours to complete on 20+ TB HDDs.
Most I/Os in the depopulation retry loop end up taking several minutes
before returning the failure to user space.
Cc: stable@vger.kernel.org # 4.18.x: 2bbeb8d scsi: core: Handle depopulation and restoration in progress
Cc: stable@vger.kernel.org # 4.18.x
Fixes: e37c7d9a0341 ("scsi: core: sanitize++ in progress")
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20250131184408.859579-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Filesystems can write to disk from page reclaim with __GFP_FS
set. Marc found a case where scsi_realloc_sdev_budget_map() ends up in
page reclaim with GFP_KERNEL, where it could try to take filesystem
locks again, leading to a deadlock.
WARNING: possible circular locking dependency detected
6.13.0 #1 Not tainted
------------------------------------------------------
kswapd0/70 is trying to acquire lock:
ffff8881025d5d78 (&q->q_usage_counter(io)){++++}-{0:0}, at: blk_mq_submit_bio+0x461/0x6e0
but task is already holding lock:
ffffffff81ef5f40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x9f/0x760
The full lockdep splat can be found in Marc's report:
https://lkml.org/lkml/2025/1/24/1101
Avoid the potential deadlock by doing the allocation with GFP_NOIO, which
prevents both filesystem and block layer recursion.
Reported-by: Marc Aurèle La France <tsi@tuyoix.net>
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250129104525.0ae8421e@fangorn
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Newer model R3* Topre Realforce keyboards share an issue with their older
R2 cousins where a report descriptor fixup is needed in order for n-key
rollover to work correctly, otherwise only 6-key rollover is available.
This patch adds some new hardware IDs for the R3S 87-key keyboard and
makes amendments to the existing hid-topre driver in order to change the
correct byte in the new model.
Signed-off-by: Daniel Brackenbury <daniel.brackenbury@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add device IDs of Panther Lake-H and Panther Lake-P into ishtp support
list.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
