summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-01-12ti_usb_3410_5052: add Multi-Tech modem supportChris Adams
Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12ti_usb_3410_5052: support alternate firmwareChris Adams
The TI USB serial driver supports specifying alternate vendor and product IDs (since the chips can and are used in devices under other vendor/product IDs). However, the alternate IDs were not loaded in the combined product table. This patch also adds support for loading alternate firmware for alternate vendor/product IDs. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12usb-serial: remove NULL checkAlan Cox
Julia Lawell found a case where a NULL check was misplaced in the usb-serial code. However as the object in question cannot be NULL the check can simply be removed. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12neo: Remove a bogus NULL checkAlan Cox
Julia Lawall found an un-needed check in the neo driver. Her patch moves the check to cover the code dereferencing it, however it cannot be NULL anyway so remove the NULL check instead. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12pty: Fix documentationAlan Cox
The pty changes and updates for window sizing forgot to correct the kerneldoc Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12Merge branch 'for-next' of git://git.o-hand.com/linux-mfdLinus Torvalds
* 'for-next' of git://git.o-hand.com/linux-mfd: mfd: Fix twl4030-core build mfd: Ensure sm501 GPIO pin mode is GPIO when configured mfd: dm355 evm MMC/SD card detection regulator: PCF50633 pmic driver input: PCF50633 input driver power_supply: PCF50633 battery charger driver rtc: PCF50633 rtc driver mfd: PCF50633 gpio support mfd: PCF50633 adc driver mfd: PCF50633 core driver
2009-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) ucc_geth: use correct UCCE macros net_dma: acquire/release dma channels on ifup/ifdown cxgb3: Keep LRO off if disabled when interface is down sfc: SFT9001: Fix condition for LNPGA power-off dccp ccid-3: Fix RFC reference smsc911x: register irq with device name, not driver name smsc911x: fix smsc911x_reg_read compiler warning forcedeth: napi schedule lock fix net: fix section mismatch warnings in dccp/ccids/lib/tfrc.c forcedeth: remove mgmt unit for mcp79 chipset qlge: Remove dynamic alloc of rx ring control blocks. qlge: Fix schedule while atomic issue. qlge: Remove support for device ID 8000. qlge: Get rid of split addresses in hardware control blocks. qlge: Get rid of volatile usage for shadow register. forcedeth: version bump and copyright forcedeth: xmit lock fix netdev: missing validate_address hooks netdev: add missing set_mac_address hook netdev: gianfar: add MII ioctl handler ...
2009-01-12Merge branch 'for_2.6.29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6 * 'for_2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6: Fix small typo misdn: indentation and braces disagree - add braces misdn: one handmade ARRAY_SIZE converted drivers/isdn/hardware/mISDN: move a dereference below a NULL test indentation & braces disagree - add braces Make parameter debug writable BUGFIX: used NULL pointer at ioctl(sk,IMGETDEVINFO,&devinfo) when devinfo.id not registered
2009-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] Pika Warp appliance watchdog timer [WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610 [WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timer [WATCHDOG] wm8350: Fix section annotations
2009-01-12fsldma: use a valid 'device' for dma_pool_createDan Williams
The dmaengine sysfs implementation was fixed to support proper lifetime rules which means that the current: new_fsl_chan->dev = &new_fsl_chan->common.dev->device; ...retrieves a NULL pointer because new_fsl_chan->common.dev has not been allocated at this point. So, set new_fsl_chan->dev to a valid device. Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Reported-by: Ira Snyder <iws@ovro.caltech.edu> Tested-by: Ira Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-12dmaengine: fix dependency chainingYuri Tikhonov
In dmaengine we track the dependencies between the descriptors using the 'next' pointers of the structure. These pointers are set to NULL as soon as the corresponding descriptor has been submitted to the channel (in dma_run_dependencies()). But, the first 'next' in chain is still remaining set, regardless the fact, that tx->next has been already submitted. This may lead to multiple submissions of the same descriptor. This patch fixes this. Actually, some previous implementation of the xxx_run_dependencies() function already had this fix in place. The fdb..0eaf3 commit, beside the correct things, broke this. Cc: <stable@kernel.org> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-12[WATCHDOG] Pika Warp appliance watchdog timerSean MacLennan
The FPGA based watchdog timer used by the Pika Warp appliance. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12[WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timerMartyn Welch
GE Fanuc SBC610 Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310, SBC610 and PPC9A Single Board Computers. This patch adds support for the watchdog timer found in one of the devices FPGAs. There are two identical watchdog timers at different offsets in the above mentioned boards, this driver is capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12[WATCHDOG] wm8350: Fix section annotationsMark Brown
The probe and remove functions were incorrectly annotated, with the misannotation of the remove function causing build failures when built in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12fbdev: Kill Atari vblank cursor blinkingGeert Uytterhoeven
Kill the last remaining vblank cursor blinking user Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: zorro - Use %pR to print resourcesGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: dio - Kill resource_size_t format warningsGeert Uytterhoeven
warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: zorro - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'device_register', declared with attribute warn_unused_result warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: dio - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'device_register', declared with attribute warn_unused_result warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: atafb - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: amiserial - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result and clean up the error path handling. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2009-01-12m68k: ser_a2232 - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2009-01-12m68k: vme_scc - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
2009-01-12m68k: amiflop - Get rid of sleep_on callsAndreas Bombe
Apart from sleep_on() calls that could be easily converted to wait_event() and completion calls amiflop also used a flag in ms_delay() and ms_isr() as a custom mutex for ms_delay() without a need for explicit unlocking. I converted that to a standard mutex. The replacement for the unconditional sleep_on() in fd_motor_on() is a complete_all() together with a INIT_COMPLETION() before the mod_timer() call. It appears to me that fd_motor_on() might be called concurrently and fd_select() does not guarantee mutual exclusivity in the case the same drive gets selected again. Signed-off-by: Andreas Bombe <aeb@debian.org> Acked-by: Jörg Dorchain <joerg@dorchain.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: zorro - Add devlist.h and gen-devlist to .gitignoreKars de Jong
drivers/zorro/.gitignore: Added devlist.h and gen-devlist to .gitignore file because they shouldn't be tracked. Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12fbdev: c2p - Rename c2p to c2p_planarGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12fbdev: c2p/atafb - Add support for Atari interleaved bitplanesGeert Uytterhoeven
The c2p() for normal bitplanes is not suitable for interleaved bitplanes with 2 bytes of interleave, causing a garbled penguin logo. Add c2p_iplan2(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12fbdev: c2p - Extract common c2p core to c2p_core.hGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12fbdev: c2p - CleanupsGeert Uytterhoeven
- Improve comments and naming - Convert macros to static inline functions - Remove superfluous `break' after `return' - Make sure we get a build-time error (undefined reference to 'c2p_unsupported') in case of future misuse - Replace `unsigned long' by `u32' in comp(), as that's what all callers use - Use {get,put}_unaligned_be32() in store_planar{,_masked}() - Use void * for arbitrary pointers - Use a union to represent pixels/words, to avoid casts Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12fbdev: c2p - Correct indentationGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12fbdev: atafb - Fix 16 bpp consoleGeert Uytterhoeven
- 16 bpp must use the cfb_*() ops - 16 bpp needs to set up info->pseudo_palette[] (was fbcon_cfb16_cmap[] in 2.4.x) - Kill commented out 2.4.x fbcon remnants Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12fbdev: atafb - Fix line length handlingGeert Uytterhoeven
- Make sure par->next_line is always set (this was done for Falcon only), as all the text console drawing operations need a valid par->next_line, - Make sure fix->line_length is always set, as some userspace applications need it because they don't have fallback code for the case where it's zero. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12libertas_tf: return NETDEV_TX_OK in TX opAndrey Yurovsky
The TX op should return NETDEV_TX_OK or NETDEV_TX_BUSY. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rt2x00: Fix rt2500usb HW crypto: WEP 128 & AESIvo van Doorn
The TXD_W0_CIPHER field is a 1-bit field. It only acts as boolean value to indicate if the frame must be encrypted or not. The way rt2x00_set_field32() worked it would grab the least signifcant bit from txdesc->cipher and use that as value. Because of that WEP 64 and TKIP worked since they had odd-numbered values, while WEP 128 and AES were even numbers and didn't work. Correctly booleanize the txdecs->cipher value to allow the hardware to encrypt the outgoing data. After this we can enable HW crypto by default again. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath5k: fix return values from ath5k_txBob Copeland
Should return NETDEV_TX_{OK,BUSY} instead of 0,-1 (this doesn't change any current functionality). Changes-licensed-under: 3-Clause-BSD Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rtl8187: Fix module so that rmmod/insmod does not errorJohannes Berg
Due to misunderstanding of the returned values allowed for the tx callback of mac80211, rtl8187 was using skb's that had been freed. This problem was triggered when the module was sujected to a rmmod/insmod cycle. After that was fixed, the modules would not work after the rmmod/insmod cycle until the USB device was reset. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12p54: fix WARN_ON at line 2247 of net/mac80211/rx.cChristian Lamparter
This patch hopefully fixes a mac80211<->p54 interaction problem, which was described by Larry Finger (ref: http://marc.info/?l=linux-wireless&m=123009889327707 ) I guess the warning was triggered by pending frames in the receive queue, while we're doing a band change 5GHz. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath5k: Correct usage of AR5K_CFG_ADHOCSteve Brown
This corrects usage of AR5K_CFG_ADHOC introduced in "ath5k: Update PCU code". Also, the name of the indicator is changed to AR5K_CFG_IBSS to more accurately reflect its function. This change restores beaconing in AP and mesh modes. Signed-off-by: Steve Brown <sbrown@cortland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath9k: Revert fix to TX status reporting for retries and MCS indexJouni Malinen
This patch reverts "ath9k: Fix TX status reporting for retries and MCS index" because that change ended up breaking ath9k rate control. While the MCS index reporting to mac80211 was indeed fixed by the patch, it did not take into account that the ath9k rate control algorithm was updating private tables based on this index and the index comes through the rate control API call, i.e., based on mac80211 TX status call. In addition, it looks like the "fix" to remove +1 from TX status 'count' field was not correct based on ieee80211_tx_status() implementation that counts the total of count values, but starting from -1, not 0. The TX status reporting for frames using MCS needs to be fixed somehow, but it does not look like there is any easy fix for the ath9k rate control algorithm, so the best option now seems to be to revert the change and bring it back once the rate control code is cleaned up to handle this better. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath9k: Fix incorrect sequence numbering for unaggregated QoS Frame.Senthil Balasubramanian
This patch fixes an issue with the sequence numbers of unaggregated QoS frames, because of which the frames are handled in a different order at the AP and resulted in MLME REPLAYFAILURE. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12Fix rt2500usb HW crypto: TKIPIvo van Doorn
rt2500usb doesn't strip the IV/ICV data from received frames, so we don't need to set the RX_FLAG_IV_STRIPPED flag. We do need to set the RX_FLAG_MMIC_STRIPPED flag for all encryption types since the MMIC has been removed from the frame. After this patch TKIP Hardware crypto works for rt2500usb. WEP and AES are still failing. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rtl8180: Fix to add STA modeLarry Finger
To be compatible with mac80211 following "mac80211: only create default STA interface if supported", rtl8180 needs to set NL80211_IFTYPE_STATION in interface_modes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Fabio Rossi <rossi.f@inwind.it> Tested-by: Piter PUNK <piterpunk@unitednerds.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12iwlwifi: Fix typo in iwl-commands.h for CCK rate bit range.Daniel Wu
My first (minor) patch, hopefully this is correct. Fix a typo in iwl-commands.h for CCK rates which needs 7 bits and not 4. Signed-off-by: Daniel Wu <dyqith@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12rt2x00: Fix segementation faultIvo van Doorn
The queue_end() macro points to 1 position after the queue, which means that if we want to know if queue is at the end of the queue we should first increment the position and then check if it is a valid entry. This fixes a segmentation fault which only occurs when the device has enough endpoints to provide a dedicated endpoint for all TX queues (which likely won't happen for rt2500usb and rt73usb, but will happen for rt2800usb). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12p54usb: fix random traffic stalls (LM87)Christian Lamparter
All LM87 firmwares need a explicit termination "packet", in oder to finish the pending transfer properly. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12p54: crypto offload fixesChristian Lamparter
This patch fixes two small flaws: - restore the original TKIP IV if we altered it. - reserve & initialize ICV with zeros. This is actually only necessary for some obsolete p54usb firmwares. But we don't know yet, if all devices are compatible with the new revisions. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12orinoco_cs: add ID for ARtem Onair Comcard 11Pavel Roskin
Reported by Michael Jarosch <mitsch@riotmusic.de> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12iwlwifi: Fix get_cmd_string() for REPLY_3945_RXSamuel Ortiz
0x1b is a 3945 specific command, we should print it too when debugging. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12ath9k: Fix chainmask handling bugSujith
The chainmasks have to be updated before setting the channel, since the HW reset routine uses them to set the appropriate registers. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-12orinoco: take the driver lock in the rx taskletDavid Kilroy
Fix the warning reproduced below. We add to rx_list in interrupt context and remove elements in tasklet context. While removing elements we need to prevent the interrupt modifying the list. Note that "orinoco: Process bulk of receive interrupt in a tasklet" did not preserve locking semantics on what is now orinoco_rx. This patch reinstates the locking semantics and ensures it covers rx_list as well. This leads to additional cleanup required in free_orinocodev. [89479.105038] WARNING: at lib/list_debug.c:30 __list_add+0x8f/0xa0() [89479.105058] list_add corruption. prev->next should be next (dddb3568), but was cbc28978. (prev=dddb3568). [89479.106002] Pid: 15746, comm: X Not tainted 2.6.28-1avb #26 [89479.106020] Call Trace: [89479.106062] [<c011d3b0>] warn_slowpath+0x60/0x80 [89479.106104] [<c01073d0>] ? native_sched_clock+0x20/0x70 [89479.106194] [<c013d825>] ? lock_release_holdtime+0x35/0x200 [89479.106218] [<c018d9f0>] ? __slab_alloc+0x550/0x560 [89479.106254] [<c02f9c9d>] ? _spin_unlock+0x1d/0x20 [89479.106270] [<c018d9f0>] ? __slab_alloc+0x550/0x560 [89479.106302] [<c01ff2a7>] ? delay_tsc+0x17/0x24 [89479.106319] [<c01ff221>] ? __const_udelay+0x21/0x30 [89479.106376] [<dfa8b1e2>] ? hermes_bap_seek+0x112/0x1e0 [hermes] [89479.106396] [<c013d7eb>] ? trace_hardirqs_off+0xb/0x10 [89479.106418] [<c018e307>] ? __kmalloc_track_caller+0xb7/0x110 [89479.106448] [<c028eefc>] ? dev_alloc_skb+0x1c/0x30 [89479.106465] [<c028eefc>] ? dev_alloc_skb+0x1c/0x30 [89479.106482] [<c020e13f>] __list_add+0x8f/0xa0 [89479.106551] [<dfd0fcae>] orinoco_interrupt+0xcae/0x16c0 [orinoco] [89479.106574] [<c013b0e3>] ? tick_dev_program_event+0x33/0xb0 [89479.106594] [<c01073d0>] ? native_sched_clock+0x20/0x70 [89479.106613] [<c013d825>] ? lock_release_holdtime+0x35/0x200 [89479.106662] [<c013d7eb>] ? trace_hardirqs_off+0xb/0x10 [89479.106892] [<dfe7faa7>] ? usb_hcd_irq+0x97/0xa0 [usbcore] [89479.106926] [<c015ba79>] handle_IRQ_event+0x29/0x60 [89479.106947] [<c015cf89>] handle_level_irq+0x69/0xe0 [89479.106963] [<c015cf20>] ? handle_level_irq+0x0/0xe0 [89479.106977] <IRQ> [<c02ca933>] ? tcp_v4_rcv+0x633/0x6e0 [89479.107025] [<c0103f0c>] ? common_interrupt+0x28/0x30 [89479.107057] [<c02a0000>] ? sk_run_filter+0x320/0x7a0 [89479.107078] [<c020e041>] ? list_del+0x21/0x90 [89479.107106] [<dfd0d24e>] ? orinoco_rx_isr_tasklet+0x2ce/0x480 [orinoco] [89479.107131] [<c01402e0>] ? __lock_acquire+0x160/0x1650 [89479.107151] [<c01073d0>] ? native_sched_clock+0x20/0x70 [89479.107169] [<c013d825>] ? lock_release_holdtime+0x35/0x200 [89479.107200] [<c012249a>] ? irq_enter+0xa/0x60 [89479.107217] [<c0104e52>] ? do_IRQ+0xd2/0x130 [89479.107518] [<c010342c>] ? restore_nocheck_notrace+0x0/0xe [89479.107542] [<c0122830>] ? __do_softirq+0x0/0x110 [89479.107561] [<c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140 [89479.107583] [<c01ff678>] ? trace_hardirqs_on_thunk+0xc/0x10 [89479.107602] [<c0122087>] ? tasklet_action+0x27/0x90 [89479.107620] [<c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140 [89479.107638] [<c01220a3>] ? tasklet_action+0x43/0x90 [89479.107655] [<c012289f>] ? __do_softirq+0x6f/0x110 [89479.107674] [<c0122830>] ? __do_softirq+0x0/0x110 [89479.107685] <IRQ> [<c015cf20>] ? handle_level_irq+0x0/0xe0 [89479.107715] [<c012246d>] ? irq_exit+0x5d/0x80 [89479.107732] [<c0104e52>] ? do_IRQ+0xd2/0x130 [89479.107747] [<c0103337>] ? sysenter_exit+0xf/0x16 [89479.107765] [<c013f83d>] ? trace_hardirqs_on_caller+0xfd/0x140 [89479.107782] [<c0103f0c>] ? common_interrupt+0x28/0x30 [89479.107797] ---[ end trace a1fc0a52df4a729d ]--- Reported-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-18 02:32:09 +0000