summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-10-14staging: rtl8188eu: remove unused parameter of HalSetBrateCfg()Michael Straube
The parameter 'struct adapter *adapt' of HalSetBrateCfg() is unused, so remove it. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: remove whitespace in qos_acm()Michael Straube
Remove whitespace in qos_acm() to improve readability. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: cleanup long lines in stop_sta_xmit()Michael Straube
Line break lines over 80 characters in stop_sta_xmit() to clear checkpatch warnings. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: cleanup long lines in rtw_get_sta_pending()Michael Straube
Line break lines over 80 characters in rtw_get_sta_pending() to clear checkpatch warnings. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: cleanup block commentsMichael Straube
Cleanup block comments to clear 'please, no space before tabs' and 'line over 80 characters' checkpatch warnings. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: remove commented codeMichael Straube
Remove unused commented code in the file core/rte_xmit.c. Clears 'please, no space before tabs' and 'line over 80 characters' checkpatch warnings. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: cleanup alignment issueMichael Straube
Clear a 'Alignment should match open parenthesis' checkpatch issue. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: use __func__ in qos_acm()Michael Straube
Use __func__ instead of hardcoded name in qos_acm(). Reported by checkpatch. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: cleanup missing spaces around operatorsMichael Straube
Clear all missing spaces around operators checkpatch issues in the file core/rtw_xmit.c. Use '+=' or '-=' where possible. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: fix spelling mistake "EINPROGESS" -> "EINPROGRESS"Colin Ian King
Trivial fix to spelling mistake in RT_TRACE message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtlwifi: phydm: fix spelling mistake "Abnrormal" -> "Abnormal"Colin Ian King
Trivial fix to spelling mistake in message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8188eu: fix spelling mistake "Abnornally" -> "Abnormally"Colin Ian King
Trivial fix to spelling mistake in ODM_RT_TRACE trace message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: comedi: tio: fix multiple missing break in switch bugsGustavo A. R. Silva
Currently, there are multiple missing break statements in two switch code blocks. This makes the execution path to fall all the way down through to the default cases, which makes the function ni_tio_set_gate_src() to always return -EINVAL. Fix this by adding the missing break statements. Also, notice that due to the absence of the break statements, the following pieces of code are unreachable: 1078 if (ret) 1079 return ret; 1080 /* 3. reenable & set mode to starts things back up */ 1081 ni_tio_set_gate_mode(counter, src); 1098 if (ret) 1099 return ret; 1100 /* 3. reenable & set mode to starts things back up */ 1101 ni_tio_set_gate2_mode(counter, src); So, by adding the missing breaks, this patch also fixes the problem above. Addresses-Coverity-ID: 1474165 ("Missing break in switch") Addresses-Coverity-ID: 1474162 ("Structurally dead code") Fixes: 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: mt7621-mmc: Use BIT macro instead of explicit shifting in dbg.hNishad Kamdar
Replace explicit shifting with BIT macro in dbg.h. Issue found by checkpatch. Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: mt7621-mmc: Fix lines over 80 characters in dbg.hNishad Kamdar
This patch fixes lines over 80 characters in dbg.h. Issue found by checkpatch. Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: mt7621-mmc: Fix lines over 80 characters in dbg.cNishad Kamdar
This patch fixes lines over 80 characters in dbg.c. Issue found by checkpatch. Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8723bs: os_dep: Shift * to be adjacent to pointer nameMamta Shukla
Shift * to be adjacent to pointer name to follow Linux coding style. Issue found with checkpatch.pl ERROR: "foo * bar" should be "foo *bar" Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com> Acked-by:Larry Finger<Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14staging: rtl8723bs: fix spelling mistake "Abnrormal" -> "Abnormal"Colin Ian King
Trivial fix to spelling mistake in message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-14Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.20. Major changes: ath10k * support NET_DETECT WoWLAN feature * wcn3990 basic functionality now working after we got QMI support
2018-10-14Merge tag 'mt76-for-kvalo-2018-10-13' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 4.20 * mt76x0 fixes * mt76x0e improvements (should be usable now) * usb support improvements * more mt76x0/mt76x2 unification work * minor fix for aggregation + powersave clients
2018-10-14Bluetooth: btsdio: Do not bind to non-removable BCM43430Cho, Yu-Chen
BCM43430 devices soldered onto the PCB (non-removable) use an UART connection for bluetooth. But also advertise btsdio support on their 3th sdio function. Signed-off-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-10-14powerpc: handover page flags with a pgprot_t parameterChristophe Leroy
In order to avoid multiple conversions, handover directly a pgprot_t to map_kernel_page() as already done for radix. Do the same for __ioremap_caller() and __ioremap_at(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-14powerpc/mm: properly set PAGE_KERNEL flags in ioremap()Christophe Leroy
Set PAGE_KERNEL directly in the caller and do not rely on a hack adding PAGE_KERNEL flags when _PAGE_PRESENT is not set. As already done for PPC64, use pgprot_cache() helpers instead of _PAGE_XXX flags in PPC32 ioremap() derived functions. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-14soc/fsl/qbman: use ioremap_cache() instead of ioremap_prot(0)Christophe Leroy
ioremap_prot() with flag set to 0 relies on a hack in __ioremap_caller() which adds PAGE_KERNEL flags when the handed flags don't look like a valid set of flags (ie don't include _PAGE_PRESENT) The intention being to map cached memory, use ioremap_cache() instead. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-14Merge branch 'i2c/for-current' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Wolfram writes: "i2c fix for 4.19: I2C has one documentation bugfix for something we changed during the v4.19 cycle" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Fix kerneldoc for renamed i2c dma put function
2018-10-13ath10k: add QMI message handshake for wcn3990 clientGovind Singh
Add WCN3990 QMI client handshakes for Q6 integrated WLAN connectivity subsystem. This layer is responsible for communicating qmi control messages to wifi fw QMI service using QMI messaging protocol. Qualcomm MSM Interface(QMI) is a messaging format used to communicate between components running between remote processors with underlying transport layer based on integrated chipset(shared memory) or discrete chipset(PCI/USB/SDIO/UART). Signed-off-by: Govind Singh <govinds@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: add debug mask for QMI layerGovind Singh
Add debug mask to control debug info of ath10k qmi messaging layer. Signed-off-by: Govind Singh <govinds@codeaurora.org> Acked-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: add support to create boardname for non-bmi targetRakesh Pillai
Add support to create the boardname for non-bmi targets like WCN3990, which uses qmi for bdf download. This boardname is used to parse the board data from board-2.bin. Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Govind Singh <govinds@codeaurora.org> Acked-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: add qmi service helpers for wcn3990 qmi clientGovind Singh
WLAN qmi server running in Q6 exposes host to target cold boot qmi handshakes. Add WLAN QMI service helpers for ath10k wcn3990 qmi client. Signed-off-by: Govind Singh <govinds@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13wil6210: fix debugfs_simple_attr.cocci warningsYueHaibing
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath9k: fix RX_STAT_INC() etc macrosArnd Bergmann
A couple of macros that deal with statistics in ath9k rely on the declaration of the 'sc' variable, which they dereference. However, when the statistics are disabled, the new instance in ath_cmn_process_fft() causes a warning for an unused variable: drivers/net/wireless/ath/ath9k/common-spectral.c: In function 'ath_cmn_process_fft': drivers/net/wireless/ath/ath9k/common-spectral.c:474:20: error: unused variable 'sc' [-Werror=unused-variable] It's better if those macros only operate on their arguments instead of known variable names, and adding a cast to (void) kills off that warning. Fixes: 03224678c013 ("ath9k: add counters for good and errorneous FFT/spectral frames") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: htt: remove some dead codeDan Carpenter
We added an unnecessary condition here in commit a904417fc876 ("ath10k: add extended per sta tx statistics support"). "legacy_rate_idx" is a u8 so it can't be negative. The caller doesn't pass negatives either. I have deleted this code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: allocate small size dma memory in ath10k_pci_diag_write_memCarl Huang
ath10k_pci_diag_write_mem may allocate big size of the dma memory based on the parameter nbytes. Take firmware diag download as example, the biggest size is about 500K. In some systems, the allocation is likely to fail because it can't acquire such a large contiguous dma memory. The fix is to allocate a small size dma memory. In the loop, driver copies the data to the allocated dma memory and writes to the destination until all the data is written. Tested with QCA6174 PCI with firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects QCA9377 PCI. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chomium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: add peer flush in ath10k_flush for STATIONWen Gong
In the noisy environment, if there are packets in the queue and can't send out, the suspend timing will be more than 5 seconds due to the wait, flush the queue to optimize the suspend timing, and let the upper layer to retry the packets after resume. Tested with QCA6174 PCI with firmware WLAN.RM.4.4.1-00109-QCARMSWPZ-1, but this will also affect QCA9377 PCI. It's not a regression with new firmware releases. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: remove unnecessary comparison of unsigned integer with < 0Gustavo A. R. Silva
There is no need to compare *ps_state_enable* with < 0 because such variable is of type u8 (8 bits, unsigned), making it impossible to hold a negative value. Fix this by removing such comparison. Addresses-Coverity-ID: 1473921 ("Unsigned compared against 0") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: htt_rx: fix signedness bug in ath10k_update_per_peer_tx_statsGustavo A. R. Silva
Currently, the error handling for the call to function ath10k_get_legacy_rate_idx() doesn't work because *rate_idx* is of type u8 (8 bits, unsigned), which makes it impossible for it to hold a value less than 0. Fix this by changing the type of variable *rate_idx* to s8 (8 bits, signed). Addresses-Coverity-ID: 1473914 ("Unsigned compared against 0") Fixes: 0189dbd71cbd ("ath10k: get the legacy rate index to update the txrate table") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: management tx ack rssi capability checkBalaji Pothunoori
Adding WMI service check for management tx ack rssi support; this is done to maintain common avg ack signal in user level for both data and management tx ack packet. Tested on QCA4019(fw version-10.4-3.2.1-00063). Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: support NET_DETECT WoWLAN featureWen Gong
For WoWLAN support it is expected to support wake up based on discovery of one or more known SSIDs. This is the WIPHY_WOWLAN_NET_DETECT feature, which shows up as an NL80211 feature flag. This shows up in 'iw phy' as: WoWLAN support: * wake up on network detection, up to 16 match sets And it can be enabled with command: iw phy0 wowlan enable net-detect interval 5000 delay 30 freqs 2412 matches ssid foo Firmware will do scan by the configured parameters after suspend and wakeup if it found matched SSIDs. Tested with QCA6174 hw3.0 with firmware WLAN.RM.4.4.1-00110-QCARMSWPZ-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> [kvalo@codeaurora.org: fix lots of endian bugs, whitespace, commit log and style cleanup] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: set probe request oui during driver startRakesh Pillai
Currently the wmi command for setting probe request oui, needed for mac randomization, is sent during the mac register. At this time, during the driver init the wmi has already been detached. This can cause unexpected behavior since the firmware is already down and the wmi has been detached. Send the wmi command for setting probe request oui during the driver start. This will make sure that the firmware is started and wmi is initialized before we send this command. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Fixes: 60e1d0fb290197fe505dff6e4e3b7e4d258dbf60 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13ath10k: fix possible out of bound access of ath10k_rates arraySriram R
While using 'ath10k_mac_get_rate_hw_value()' to obtain the hw value from the passed bitrate, there is a chance of out of bound array access when wrong bitrate is passed. This is fixed by comparing the bitrates within the correct size of the ath10k_rates array. Fixes commit f279294e9ee2 ("ath10k: add support for configuring management packet rate"). Also correction made to some indents used in the above commit. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13rtl8xxxu: Remove set but not used variables 'usedesc40' and 'seq_number'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function 'rtl8xxxu_tx': drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:4925:7: warning: variable 'usedesc40' set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:4921:6: warning: variable 'seq_number' set but not used [-Wunused-but-set-variable] 'usedesc40' and 'seq_number' are not used any more after commit b59415c2dd08 ("rtl8xxxu: Split filling of TX descriptors into separate functions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13qtnfmac_pcie: cleanup Pearl platform headersSergey Matyukevich
Remove redundant information from Pearl platform headers. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13qtnfmac: use SPDX identifier for pcie bus layer filesSergey Matyukevich
Change pcie bus layer licensing information to SPDX format. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13qtnfmac: use 'help' in KconfigSergey Matyukevich
Fix checkpatch warning: use preferred 'help' option in Kconfig. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13libertas: return errno from lbs_add_card()Lubomir Rintel
This makes the error handling somewhat cleaner -- lbs_add_card() does no logner throw away the errno and lets its callers propagate it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13libertas: don't set URB_ZERO_PACKET on IN USB transferLubomir Rintel
The USB core gets rightfully upset: usb 1-1: BOGUS urb flags, 240 --> 200 WARNING: CPU: 0 PID: 60 at drivers/usb/core/urb.c:503 usb_submit_urb+0x2f8/0x3ed Modules linked in: CPU: 0 PID: 60 Comm: kworker/0:3 Not tainted 4.19.0-rc6-00319-g5206d00a45c7 #39 Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014 Workqueue: events request_firmware_work_func EIP: usb_submit_urb+0x2f8/0x3ed Code: 75 06 8b 8f 80 00 00 00 8d 47 78 89 4d e4 89 55 e8 e8 35 1c f6 ff 8b 55 e8 56 52 8b 4d e4 51 50 68 e3 ce c7 c0 e8 ed 18 c6 ff <0f> 0b 83 c4 14 80 7d ef 01 74 0a 80 7d ef 03 0f 85 b8 00 00 00 8b EAX: 00000025 EBX: ce7d4980 ECX: 00000000 EDX: 00000001 ESI: 00000200 EDI: ce7d8800 EBP: ce7f5ea8 ESP: ce7f5e70 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 EFLAGS: 00210292 CR0: 80050033 CR2: 00000000 CR3: 00e80000 CR4: 00000090 Call Trace: ? if_usb_fw_timeo+0x64/0x64 __if_usb_submit_rx_urb+0x85/0xe6 ? if_usb_fw_timeo+0x64/0x64 if_usb_submit_rx_urb_fwload+0xd/0xf if_usb_prog_firmware+0xc0/0x3db ? _request_firmware+0x54/0x47b ? _request_firmware+0x89/0x47b ? if_usb_probe+0x412/0x412 lbs_fw_loaded+0x55/0xa6 ? debug_smp_processor_id+0x12/0x14 helper_firmware_cb+0x3c/0x3f request_firmware_work_func+0x37/0x6f process_one_work+0x164/0x25a worker_thread+0x1c4/0x284 kthread+0xec/0xf1 ? cancel_delayed_work_sync+0xf/0xf ? kthread_create_on_node+0x1a/0x1a ret_from_fork+0x2e/0x38 ---[ end trace 3ef1e3b2dd53852f ]--- Cc: stable@vger.kernel.org Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13iwlegacy: Add a lock assertion in il4965_send_rxon_assoc()Jia-Ju Bai
The variables il->staging.filter_flags, rxon1->filter_flags and rxon2->filter_flags need to be protected by the mutex lock il->mutex. This patch adds a lock assertion of il->mutex to check whether this lock is held. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13brcmsmac: AP mode: update beacon when TIM changesAli MJ Al-Nasrawy
Beacons are not updated to reflect TIM changes. This is not compliant with power-saving client stations as the beacons do not have valid TIM and can cause the network to stall at random occasions and to have highly variable latencies. Fix it by updating beacon templates on mac80211 set_tim callback. Addresses an issue described in: https://marc.info/?i=20180911163534.21312d08%20()%20manjaro Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13mt76x0: phy: do not run calibration during channel switchLorenzo Bianconi
Do not perform phy/vga calibration during channel switch. Moreover remove mt76x0_agc_save and mt76x0_agc_restore routines since they are no longer necessary. Furthermore run mt76_set_channel in order to check if there are pending frames during channel switch Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: align channel gain logic to mt76x2 oneLorenzo Bianconi
Update vga tuning algorithm to the one used in mt76x2 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-18 08:26:22 +0000