summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-10-13mt76: introduce mt76x02_init_agc_gain routineLorenzo Bianconi
Add mt76x02_init_agc_gain routine in mt76x02-lib moudule in order to be reused by mt76x0 for vga initalization Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.cLorenzo Bianconi
Move mt76x02_phy_adjust_vga_gain routine in mt76x02-lib module in order to be reused by mt76x0 driver for vga calibration Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move rssi_gain_thresh routines in mt76x02-lib moduleLorenzo Bianconi
Move mt76x2_get_rssi_gain_thresh and mt76x2_get_low_rssi_gain_thresh routines in mt76x02-lib module in order to be reused by mt76x0 driver for dynamic vga calibration Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: add phy/vco temperature compensationLorenzo Bianconi
Introduce phy/vco temperature calibration. Moreover fix configuration of register 67 on bank0 during temperature reading and use mt76_poll utility routine to poll core34 register. Furthermore temperature compensation needs to be disabled if the device supports tssi compensation. This issue has never been hit since temperature reading is not actually used by usb code. Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: eeprom: introduce mt76x0_tssi_enabled routineLorenzo Bianconi
Add mt76x0_tssi_enabled in order to check if tssi compensation is enabled since mt76x0 condition differs from mt76x2 one. Moreover move back mt76x02_temp_tx_alc_enabled and mt76x02_tssi_enabled routines in mt76x2/eeprom.h since they are mt76x2 specific Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: update set_channel for mt76x0e devicesLorenzo Bianconi
Do not run mt76x0_vco_cal and mt76x0_bbp_set_bw routines and configure MT_TX_SW_CFG0 register for pcie devices in mt76x0_phy_set_channel function. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: introduce mt76x0_phy_calirate routineLorenzo Bianconi
Add mt76x0_phy_calirate routine in order to perform phy calibration for mt76x0e devices. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: rename mt76x0_phy_calibrateLorenzo Bianconi
Rename mt76x0_phy_calibrate routine in mt76x0_phy_calibration_work in order to not collide with calibration routine for mt76x0e Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move mt76x02_phy_set_band in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_phy_set_band routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: move mt76x02_phy_set_bw in mt76x02-lib moduleLorenzo Bianconi
Move mt76x02_phy_set_bw routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: remove channel parameter from mt76x0_phy_set_chan_bbp_paramsLorenzo Bianconi
Remove unused channel parameter from mt76x0_phy_set_chan_bbp_params routine signature Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assocLorenzo Bianconi
Fix restore value configured in MT_BBP(IBI, 9) register in mt76x0_phy_recalibrate_after_assoc routine. Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: mt76x0e: another fix for the external PA current settingFelix Fietkau
- Use the register number define instead of a magic value - Fix inverted bit test (override needs to be applied if the bit is not set) Fixes: 2b2cb40bcd7d ("mt76x0: pci: add hw initialization at bootstrap") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: fix set external PA I/O currentYueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/mt76x0/pci.c: In function 'mt76x0e_register_device': drivers/net/wireless/mediatek/mt76/mt76x0/pci.c:107:8: warning: variable 'data' set but not used [-Wunused-but-set-variable] It seems correct value to write is 'data' Fixes: 2b2cb40bcd7d ("mt76x0: pci: add hw initialization at bootstrap") Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: do not store aggregation sequence number for null-data framesFelix Fietkau
Fixes a rare corner case where a BlockAckReq might get the wrong sequence number. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: remove dma.hStanislaw Gruszka
dma.h is not used any longer. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: reserve enough room for USB tx skbsStanislaw Gruszka
Reserve enough room for USB skb, so we don not need to check the room every time we send frame. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: add mt76x0_register_device in mt76x0e_register_deviceLorenzo Bianconi
Run mt76x0_register_device routine in mt76x0e_register_device in order to register the device to the mac80211 layer. Moreover init mt76_driver_ops data structure and register interrupt line Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: disable ldpc coding for mt76x0 devicesLorenzo Bianconi
Disable ldpc coding for mt76x0 devices. Morover remove mt76x02_mac_fill_txwi routine since it is used just in mt76x02_mac_write_txwi Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: add missing mac80211 callbacksLorenzo Bianconi
Add missing mac80211 callbacks in mt76x0e_ops data structure Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: pci: report firmware version using ethtoolLorenzo Bianconi
Report via ethtool fw_ver and build_ver members of mt76x02_fw_header data structure similarly to what is reported in the syslog Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_eeprom.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_txrx.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_mac.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_usb_mcu.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_util.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_phy.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.cLorenzo Bianconi
Use mt76x02_dev data structure as reference in mt76x02_mcu.c instead of mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr}Lorenzo Bianconi
Fix typo in bank check in mt76x0_rf_csr_{wr,rr} routines. This issue has never been hit since mt76x0_rf_csr_{wr,rr} are actually used just by pci code Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: use bus helper to identify rf access methodStanislaw Gruszka
Use mt76_is_usb() to identify RF access method instead of MT76_STATE_MCU_RUNNING flag and add warning since MCU has to be initialized before we can access RF registers via MCU. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: correct RF reg pairs write for PCIeStanislaw Gruszka
We have to use RF CSR method for PCIe. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76: allow to identify busStanislaw Gruszka
Add helpers to identify bus type. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: correct RF access via RF_CSR register.Stanislaw Gruszka
PCIe version don't use MCU for RF registers access. We need to correct RF CSR method to support up to 127 RF registers. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13mt76x0: print BBP version only for debugStanislaw Gruszka
Use dev_dbg to print BBP version. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-13watchdog: armada_37xx_wdt: use do_div for u64 divisionMarek Behún
When the driver is built on 32 bit architectures during compile test, the linker complains about "__udivdi3" being undefined. We have to use do_div macro instead of the division operator when dividing u64 value. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-13watchdog: Add support for Armada 37xx CPU watchdogMarek Behún
This adds support for the CPU watchdog found on Marvell Armada 37xx SoCs. There are 4 counters which can be set as CPU watchdog counters. This driver uses the second counter (ID 1, counting from 0) as watchdog counter, and first counter (ID 0) to implement pinging on the second counter without the need to disable it. Since counters IDs 2 and 3 are enabled already before even U-Boot starts, this driver does not use them at all, for example by adding a device tree property for counter selection. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-13watchdog: mpc8xxx: provide boot statusChristophe Leroy
mpc8xxx watchdog driver supports the following platforms: - mpc8xx - mpc83xx - mpc86xx Those three platforms have a 32 bits register which provides the reason of the last boot, including whether it was caused by the watchdog. mpc8xx: Register RSR, bit SWRS (bit 3) mpc83xx: Register RSR, bit SWRS (bit 28) mpc86xx: Register RSTRSCR, bit WDT_RR (bit 11) This patch maps the register as defined in the device tree and updates wdt.bootstatus based on the value of the watchdog related bit. Then the information can be retrieved via the WDIOC_GETBOOTSTATUS ioctl. Hereunder is an example of devicetree for mpc8xx, the Reset Status Register being at offset 0x288: WDT: watchdog@0 { compatible = "fsl,mpc823-wdt"; reg = <0x0 0x10 0x288 0x4>; }; On the mpc83xx, RSR is at offset 0x910 On the mpc86xx, RSTRSCR is at offset 0xe0094 Suggested-by: Radu Rendec <radu.rendec@gmail.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # On mpc885 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-13drivers/block/z2ram: use ioremap_wt() instead of __ioremap(_PAGE_WRITETHRU)Christophe Leroy
_PAGE_WRITETHRU is a target specific flag. Prefer generic functions. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-13drivers/video/fbdev: use ioremap_wc/wt() instead of __ioremap()Christophe Leroy
_PAGE_NO_CACHE is a platform specific flag. In addition, this flag is misleading because one would think it requests a noncached page whereas a noncached page is _PAGE_NO_CACHE | _PAGE_GUARDED _PAGE_NO_CACHE alone means write combined noncached page, so lets use ioremap_wc() instead. _PAGE_WRITETHRU is also platform specific flag. Use ioremap_wt() instead. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-13rtlwifi: rtl8821ae: replace _rtl8821ae_mrate_idx_to_arfr_id with generic versionColin Ian King
Function _rtl8821ae_mrate_idx_to_arfr_id is functionally identical to the generic version rtl_mrate_idx_to_arfr_id, so remove _rtl8821ae_mrate_idx_to_arfr_id and use the generic one instead. This also fixes a missing break statement found by CoverityScan in _rtl8821ae_mrate_idx_to_arfr_id, namely: CID#1167237 ("Missing break in switch") Thanks to Joe Perches for spotting this when I submitted an earlier patch. Fixes: 3c05bedb5fef ("Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr()Dan Carpenter
Fix memory leak in L2c threaded interrupt handler. [ bp: Rewrite commit message. ] Fixes: 41003396f932 ("EDAC, thunderx: Add Cavium ThunderX EDAC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: David Daney <david.daney@cavium.com> CC: Jan Glauber <jglauber@cavium.com> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Sergey Temerkhanov <s.temerkhanov@gmail.com> CC: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20181013102843.GG16086@mwanda
2018-10-13iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()Luca Coelho
The rs_rate_from_ucode_rate() function may return -EINVAL if the rate is invalid, but none of the callsites check for the error, potentially making us access arrays with index IWL_RATE_INVALID, which is larger than the arrays, causing an out-of-bounds access. This will trigger KASAN warnings, such as the one reported in the bugzilla issue mentioned below. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659 Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13Merge tag 'iwlwifi-next-for-kalle-2018-10-12' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Fourth set of iwlwifi patches intended for 4.20 * Support for a new scan type; * Clean-up in the queue handling code; * A few bug fixes;
2018-10-13powerpc/eeh: Cleanup eeh_pe_state_mark()Sam Bobroff
Currently, eeh_pe_state_mark() marks a PE (and it's children) with a state and then performs additional processing if that state included EEH_PE_ISOLATED. The state parameter is always a constant at the call site, so rearrange eeh_pe_state_mark() into two functions and just call the appropriate one at each site. Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-13Merge tag 'kvm-s390-next-4.20-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390/vfio-ap: Fixes and enhancements for vfio-ap - add tracing - fix a locking bug - make local functions and data static
2018-10-13Merge tag 'arm64-fixes' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Will writes: "More arm64 fixes - Reject CHAIN PMU events when they are not part of a 64-bit counter - Fix WARN_ON_ONCE() that triggers for reserved regions that don't correspond to mapped memory" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: perf: Reject stand-alone CHAIN events for PMUv3 arm64: Fix /proc/iomem for reserved but not memory regions
2018-10-13kill TIOCSERGSTRUCTAl Viro
Once upon a time a bunch of serial drivers used to provide that; today it's only amiserial and it's FUBAR - the structure being copied to userland includes kernel pointers, fields with config-dependent size, etc. No userland code using it could possibly survive - e.g. enabling lockdep definitely changes the layout. Besides, it's a massive infoleak. Kill it. If somebody needs that data for debugging purposes, they can bloody well expose it saner ways. Assuming anyone does debugging of amiserial in the first place, that is. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13change semantics of ldisc ->compat_ioctl()Al Viro
First of all, make it return int. Returning long when native method had never allowed that is ridiculous and inconvenient. More importantly, change the caller; if ldisc ->compat_ioctl() is NULL or returns -ENOIOCTLCMD, tty_compat_ioctl() will try to feed cmd and compat_ptr(arg) to ldisc's native ->ioctl(). That simplifies ->compat_ioctl() instances quite a bit - they only need to deal with ioctls that are neither generic tty ones (those would get shunted off to tty_ioctl()) nor simple compat pointer ones. Note that something like TCFLSH won't reach ->compat_ioctl(), even if ldisc ->ioctl() does handle it - it will be recognized earlier and passed to tty_ioctl() (and ultimately - ldisc ->ioctl()). For many ldiscs it means that NULL ->compat_ioctl() does the right thing. Those where it won't serve (see e.g. n_r3964.c) are also easily dealt with - we need to handle the numeric-argument ioctls (calling the native instance) and, if such would exist, the ioctls that need layout conversion, etc. All in-tree ldiscs dealt with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13kill TIOCSER[SG]WILDAl Viro
the only user is very old setserial rc script and even that (as far back as MCC Interim, AFAICS) doesn't actually fail - just gives one message during the boot ("Cannot scan for wild interrupts") and proceeds past that just fine. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13synclink_gt(): fix compat_ioctl()Al Viro
compat_ptr() for pointer-taking ones... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-18 10:05:42 +0000