| Age | Commit message (Collapse) | Author |
|---|
|
Eliminate the following smatch warning:
drivers/scsi/aacraid/linit.c:867 aac_eh_tmf_hard_reset_fib() warn:
inconsistent indenting.
Link: https://lore.kernel.org/r/20220309005031.126504-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A page fault was encountered in mpt3sas on a LUN reset error path:
[ 145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0)
[ 145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2)
[ 145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2)
[ 145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00
[ 145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0)
[ 145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0)
[ 149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002)
[ 149.875202] BUG: unable to handle page fault for address: 00000007fffc445d
[ 149.885617] #PF: supervisor read access in kernel mode
[ 149.894346] #PF: error_code(0x0000) - not-present page
[ 149.903123] PGD 0 P4D 0
[ 149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S O 5.10.89-altav-1 #1
[ 149.934327] Hardware name: DDN 200NVX2 /200NVX2-MB , BIOS ATHG2.2.02.01 09/10/2021
[ 149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas]
[ 149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee
[ 149.991952] RSP: 0018:ffffc9000f1ebcb8 EFLAGS: 00010246
[ 150.000937] RAX: 0000000000000055 RBX: 00000007fffc445d RCX: 000000002548f071
[ 150.011841] RDX: 00000000ffff8881 RSI: 0000000000000001 RDI: ffff888125ed50d8
[ 150.022670] RBP: 0000000000000000 R08: 0000000000000000 R09: c0000000ffff7fff
[ 150.033445] R10: ffffc9000f1ebb68 R11: ffffc9000f1ebb60 R12: 0000000000000000
[ 150.044204] R13: ffff888125ed50d8 R14: 0000000000000080 R15: 34cdc00034cdea80
[ 150.054963] FS: 0000000000000000(0000) GS:ffff88dfaf200000(0000) knlGS:0000000000000000
[ 150.066715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 150.076078] CR2: 00000007fffc445d CR3: 000000012448a006 CR4: 0000000000770ee0
[ 150.086887] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 150.097670] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 150.108323] PKRU: 55555554
[ 150.114690] Call Trace:
[ 150.120497] ? printk+0x48/0x4a
[ 150.127049] mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas]
[ 150.136453] mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas]
[ 150.145759] scsih_dev_reset+0xea/0x300 [mpt3sas]
[ 150.153891] scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod]
[ 150.162206] ? __scsi_host_match+0x20/0x20 [scsi_mod]
[ 150.170406] ? scsi_try_target_reset+0x90/0x90 [scsi_mod]
[ 150.178925] ? blk_mq_tagset_busy_iter+0x45/0x60
[ 150.186638] ? scsi_try_target_reset+0x90/0x90 [scsi_mod]
[ 150.195087] scsi_error_handler+0x3a5/0x4a0 [scsi_mod]
[ 150.203206] ? __schedule+0x1e9/0x610
[ 150.209783] ? scsi_eh_get_sense+0x210/0x210 [scsi_mod]
[ 150.217924] kthread+0x12e/0x150
[ 150.224041] ? kthread_worker_fn+0x130/0x130
[ 150.231206] ret_from_fork+0x1f/0x30
This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q
pointer outside of the list_for_each_entry() loop. At the end of the full
list traversal the pointer is invalid.
Move the _base_process_reply_queue() call inside of the loop.
Link: https://lore.kernel.org/r/d625deae-a958-0ace-2ba3-0888dd0a415b@ddn.com
Fixes: 711a923c14d9 ("scsi: mpt3sas: Postprocessing of target and LUN reset")
Cc: stable@vger.kernel.org
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Matt Lupfer <mlupfer@ddn.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The RX/TX threads for iSCSI connection can be scheduled to any online CPUs,
and will not be rescheduled.
When binding other heavy load threads along with iSCSI connection RX/TX
thread to the same CPU, the iSCSI performance will be worse.
Add iscsi/cpus_allowed_list in configfs. The available CPU set of iSCSI
connection RX/TX threads is allowed_cpus & online_cpus. If it is modified,
all RX/TX threads will be rescheduled.
Link: https://lore.kernel.org/r/20220301075500.14266-1-mingzhe.zou@easystack.cn
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the common libsas internal abort functionality.
In addition, this driver has special handling for internal abort timeouts -
specifically whether to reset the controller in that instance, so extend
the API for that.
Timeout is now increased to 20 * Hz from 6 * Hz.
We also retry for failure now, but this should not make a difference.
Link: https://lore.kernel.org/r/1647001432-239276-5-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
New special handling is added for SAS_PROTOCOL_INTERNAL_ABORT proto so that
we may use the common queue command API.
Link: https://lore.kernel.org/r/1647001432-239276-4-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for a "device" variant of internal abort, which will abort all
pending I/Os for a specific device.
Link: https://lore.kernel.org/r/1647001432-239276-3-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The internal abort feature is common to hisi_sas and pm8001 HBAs, and the
driver support is similar also, so add a common handler.
Two modes of operation will be supported:
- single: Abort a single tagged command
- device: Abort all commands associated with a specific domain device
A new protocol is added, SAS_PROTOCOL_INTERNAL_ABORT, so the common queue
command API may be re-used.
Only add "single" support as a first step.
Link: https://lore.kernel.org/r/1647001432-239276-2-git-send-email-john.garry@huawei.com
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The soft_wwpn/soft_wwn functionality, which allows the driver to modify
service parameters in an attempt to override the adapter-assigned WWN, was
originally attempted to be removed roughly 6 yrs ago as new fabric features
were being introduced that clashed with the implementation. In the end,
the feature was left in with the user being responsible if things went
south.
We've reached a point where soft_wwn is no longer functional and is failing
in almost all production use cases. Use of Fabric features such as Fabric
Assigned WWPN and Automatic DPORT is now prevalent and the features require
coordination between the adapter and driver that can't be solved by the
simplistic update of the service parameters. As it is no longer functional,
the feature is to be removed.
There are still ways to override the adapter-assigned WWN but they require
the admin to invoke bios/efi level menus.
Link: https://lore.kernel.org/r/20220310154845.11125-1-jsmart2021@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Sync up with mainline to again get the latest changes in HID subsystem.
|
|
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes: 14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307120234.28657-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid
the refcount leak.
Fixes: 32e67eee670e ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307115116.25316-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When krealloc() fails and pctrl->functions is NULL, no error
return code of berlin_pinctrl_build_state() is assigned.
To fix this bug, ret is assigned with -ENOMEM when pctrl->functions
is NULL.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220303080206.16463-1-tangmeng@uniontech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. There was a check for the number of endpoints, but not
for the type of endpoint.
Fix it by replacing old desc.bNumEndpoints check with
usb_find_common_endpoints() helper for finding endpoints
Fail log:
usb 5-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Workqueue: usb_hub_wq hub_event
...
Call Trace:
<TASK>
aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830
input_open_device+0x1bb/0x320 drivers/input/input.c:629
kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593
Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints")
Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The irq variable is defined as unsigned int. If the platform_get_irq()
returns a negative value, data type cast may result in error.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi (CGEL ZTE) <lv.ruyi@zte.com.cn>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220308025054.2077162-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The SC8280XP comes, like all other Qualcomm platforms, with a TLMM
block, so add a driver for it.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308221132.1423218-2-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Right now, when a gpio value is set, the actual hardware pin gets set
asynchronously. When linux write the output register, it takes some time
until it is actually propagated to the output shift registers. If that
output port is connected to an I2C mux for example, the linux driver
assumes the I2C bus is already switched although it is not.
Fortunately, there is a single shot mode with a feedback: you can
trigger the single shot and the hardware will clear that bit once it has
finished the clocking and strobed the load signal of the shift
registers. This can take a considerable amount of time though.
Measuremens have shown that it takes up to a whole burst cycle gap which
is about 50ms on the largest setting. Therefore, we have to mark the
output bank as sleepable. To avoid unnecessary waiting, just trigger the
single shot if the value was actually changed.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-6-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Make sgpio_output_set() return an error value. Don't just ignore the
return value of any regmap access but propagate it to our callers. Even
if the accesses never fail, this is a preparation patch to add single
shot mode where we need to poll a bit and thus we might get -ETIMEDOUT.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-5-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Convert sgpio_clrsetbits() to use regmap_update_bits() and drop the
spinlocks because regmap already takes care of the locking.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-4-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The interrupt ack register has the usual "write one to clear" semantics.
No read-modify-write is required here.
This is also a preparation patch to change the sgpio_clrsetbits() to use
regmap_update_bits() which don't write the value if it is not changed.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-3-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Protect any RMW access to the registers by a spinlock.
Fixes: 7e5ea974e61c ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220226204507.2511633-2-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In the blamed commit, it removes the duplicate of_node assignment in the
driver. But the driver uses this before calling into of_gpio_dev_init to
determine if it needs to assign an IRQ chip to the GPIO. The fixes
consists in using the platform_get_irq_optional
Fixes: 8a8d6bbe1d3bc7 ("pinctrl: Get rid of duplicate of_node assignment in the drivers")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220304144432.3397621-3-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
iomuxc_snvs from imx6ull supports 2 boot mode and 10 tamper pins.
Probably most users won't use them, causing this error message during boot:
no groups defined in /soc/bus@2200000/iomuxc-snvs@2290000
This is actually not an error in this case, so reduce the level
accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220224094243.1376965-1-alexander.stein@ew.tq-group.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
module_platform_driver() makes the code simpler by eliminating
boilerplate code.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Link: https://lore.kernel.org/r/20220224043605.26157-1-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add leading space to spdx tag
Replacements
voilates to violates
sepearte to separate
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220220162355.3594831-1-trix@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220308100956.2750295-12-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220308100956.2750295-11-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220308100956.2750295-10-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Some of the MediaTek chips that utilize the Paris pinctrl driver library
support a lower drive strength (<= 1mA) than the standard drive strength
settings (2~16 mA) on certain pins. This was previously supported by the
custom MTK_PIN_CONFIG_DRV_ADV parameter along with the
"mediatek,drive-strength-adv" device tree property.
The drive strength values for this hardware are 125, 250, 500, and 1000 mA,
and can be readily described by the existing "drive-strength-microamp"
property, which then gets parsed by the generic pinconf library into the
parameter PIN_CONFIG_DRIVE_STRENGTH_UA.
Add support for PIN_CONFIG_DRIVE_STRENGTH_UA while keeping the old
custom parameter around for backward compatibility.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-9-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The current code deals with optional features by testing for the
function pointers and returning -ENOTSUPP if it is not valid. This is
done for multiple pin config settings and results in the code that
handles the supporting cases to get indented by one level. This is
aggrevated by the fact that some features require another level of
conditionals.
Instead of assigning the same error code in all unsupported optional
feature cases, simply have that error code as the default, and break
out of the switch/case block whenever a feature is unsupported, or an
error is returned. This reduces indentation by one level for the useful
code.
Also replace the goto statements with break statements. The result is
the same, as the gotos simply exit the switch/case block, which can
also be achieved with a break statement. With the latter the intent
is clear and easier to understand.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-8-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Virtual GPIOs do not have any hardware state associated with them. Any
attempt to read back hardware state for these pins result in error
codes.
Skip dumping extra pin config information for these virtual GPIOs.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-7-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The caller of mtk_pctrl_show_one_pin() is responsible for printing the
full line. mtk_pctrl_show_one_pin(), called through mtk_pctrl_dbg_show(),
should only produce a string containing the extra information the driver
wants included.
Drop the extra newlines. Also unbreak the line that is only slightly
over 80 characters to make it easier on the eye, and get rid of the
braces now that each block in the conditionals is just one line.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-6-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
mtk_pconf_group_get(), used to read back pingroup pin config state,
simply returns a set of configs saved from a previous invocation of
mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed
in from the pinconf core, which does not match the current hardware
state.
Since the driver library is designed to have one pin per group, pass
through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the
current pin config state of the only pin in the group.
Also drop the assignment of pin config state to the group.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-5-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
For mtk_pinconf_get(), the "argument" argument is typically returned by
pinconf_to_config_argument(), which holds the value for a given pinconf
parameter. It certainly should not have the type of "enum pin_config_param",
which describes the type of the pinconf parameter itself.
Change the type to u32, which matches the return type of
pinconf_to_config_argument().
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-4-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When reading back pin bias settings, if the pin is not in the
corresponding bias state, the function should return -EINVAL.
Fix this in the mediatek-paris pinctrl library so that the read back
state is not littered with bogus a "input bias disabled" combined with
"pull up" or "pull down" states.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-3-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The bias-pull-* properties, or PIN_CONFIG_BIAS_PULL_* pin config
parameters, accept optional arguments in ohms denoting the strength of
the pin bias.
Print these values out in debugfs as well.
Fixes: eec450713e5c ("pinctrl: pinconf-generic: Add flag to print arguments")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308100956.2750295-2-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The ice_vc_cfg_promiscuous_mode_msg function directly checks
ICE_VIRTCHNL_VF_CAP_PRIVILEGE, instead of using the existing helper
function ice_is_vf_trusted. Switch this to use the helper function so
that all trusted checks are consistent. This aids in any potential
future refactor by ensuring consistent code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When ice_eswitch_configure fails, print an error message to make it more
obvious why VF initialization did not succeed.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_ena_vfs function and some of its sub-functions like
ice_set_per_vf_res use a "if (<function>) { <print error> ; <exit> }"
flow. This flow discards specialized errors reported by the called
function.
This style is generally not preferred as it makes tracing error sources
more difficult. It also means we cannot log the actual error received
properly.
Refactor several calls in the ice_ena_vfs function that do this to catch
the error in the 'ret' variable. Report this in the messages, and then
return the more precise error value.
Doing this reveals that ice_set_per_vf_res returns -EINVAL or -EIO in
places where -ENOSPC makes more sense. Fix these calls up to return the
more appropriate value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_set_vf_port_vlan function is located in ice_sriov.c very far
away from the other .ndo operations that it is similar to. Move this so
that its located near the other .ndo operation definitions.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The API to control the VSI spoof checking for a VF VSI has three
functions: enable, disable, and set. The set function takes the VSI and
the VF and decides whether to call enable or disable based on the
vf->spoofchk field.
In some flows, vf->spoofchk is not yet set, such as the function used to
control the setting for a VF. (vf->spoofchk is only updated after a
success).
Simplify this API by refactoring ice_vf_set_spoofchk_cfg to be
"ice_vsi_apply_spoofchk" which takes the boolean and allows all callers
to avoid having to determine whether to call enable or disable
themselves.
This matches the expected callers better, and will prevent the need to
export more than one function when this code must be called from another
file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ICE_MAX_VF_COUNT field is defined in ice_sriov.h. This count is true
for SR-IOV but will not be true for all VF implementations, such as when
the ice driver supports Scalable IOV.
Rename this definition to clearly indicate ICE_MAX_SRIOV_VFS.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
A few more macros exist in ice_sriov.h which are not used anywhere.
These can be safely removed. Note that ICE_VIRTCHNL_VF_CAP_L2 capability
is set but never checked anywhere in the driver. Thus it is also safe to
remove.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The vc_ops structure is used to allow different handlers for virtchnl
commands when the driver is in representor mode. The current
implementation uses a copy of the ops table in each VF, and modifies
this copy dynamically.
The usual practice in kernel code is to store the ops table in a
constant structure and point to different versions. This has a number of
advantages:
1. Reduced memory usage. Each VF merely points to the correct table,
so they're able to re-use the same constant lookup table in memory.
2. Consistency. It becomes more difficult to accidentally update or
edit only one op call. Instead, the code switches to the correct
able by a single pointer write. In general this is atomic, either
the pointer is updated or its not.
3. Code Layout. The VF structure can store a pointer to the table
without needing to have the full structure definition defined prior
to the VF structure definition. This will aid in future refactoring
of code by allowing the VF pointer to be kept in ice_vf_lib.h while
the virtchnl ops table can be maintained in ice_virtchnl.h
There is one major downside in the case of the vc_ops structure. Most of
the operations in the table are the same between the two current
implementations. This can appear to lead to duplication since each
implementation must now fill in the complete table. It could make
spotting the differences in the representor mode more challenging.
Unfortunately, methods to make this less error prone either add
complexity overhead (macros using CPP token concatenation) or don't work
on all compilers we support (constant initializer from another constant
structure).
The cost of maintaining two structures does not out weigh the benefits
of the constant table model.
While we're making these changes, go ahead and rename the structure and
implementations with "virtchnl" instead of "vc_vf_". This will more
closely align with the planned file renaming, and avoid similar names when
we later introduce a "vf ops" table for separating Scalable IOV and
Single Root IOV implementations.
Leave the accessor/assignment functions in order to avoid issues with
compiling with options disabled. The interface makes it easier to handle
when CONFIG_PCI_IOV is disabled in the kernel.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Several headers in the ice driver include ice.h even though they are
themselves included by that header. The most notable of these is
ice_common.h, but several other headers also do this.
Such a recursive inclusion is problematic as it forces headers to be
included in a strict order, otherwise compilation errors can result. The
circular inclusions do not trigger an endless loop due to standard
header inclusion guards, however other errors can occur.
For example, ice_flow.h defines ice_rss_hash_cfg, which is used by
ice_sriov.h as part of the definition of ice_vf_hash_ip_ctx.
ice_flow.h includes ice_acl.h, which includes ice_common.h, and which
finally includes ice.h. Since ice.h itself includes ice_sriov.h, this
creates a circular dependency.
The definition in ice_sriov.h requires things from ice_flow.h, but
ice_flow.h itself will lead to trying to load ice_sriov.h as part of its
process for expanding ice.h. The current code avoids this issue by
having an implicit dependency without the include of ice_flow.h.
If we were to fix that so that ice_sriov.h explicitly depends on
ice_flow.h the following pattern would occur:
ice_flow.h -> ice_acl.h -> ice_common.h -> ice.h -> ice_sriov.h
At this point, during the expansion of, the header guard for ice_flow.h
is already set, so when ice_sriov.h attempts to load the ice_flow.h
header it is skipped. Then, we go on to begin including the rest of
ice_sriov.h, including structure definitions which depend on
ice_rss_hash_cfg. This produces a compiler warning because
ice_rss_hash_cfg hasn't yet been included. Remember, we're just at the
start of ice_flow.h!
If the order of headers is incorrect (ice_flow.h is not implicitly
loaded first in all files which include ice_sriov.h) then we get the
same failure.
Removing this recursive inclusion requires fixing a few cases where some
headers depended on the header inclusions from ice.h. In addition, a few
other changes are also required.
Most notably, ice_hw_to_dev is implemented as a macro in ice_osdep.h,
which is the likely reason that ice_common.h includes ice.h at all. This
macro implementation requires the full definition of ice_pf in order to
properly compile.
Fix this by moving it to a function declared in ice_main.c, so that we
do not require all files to depend on the layout of the ice_pf
structure.
Note that this change only fixes circular dependencies, but it does not
fully resolve all implicit dependencies where one header may depend on
the inclusion of another. I tried to fix as many of the implicit
dependencies as I noticed, but fixing them all requires a somewhat
tedious analysis of each header and attempting to compile it separately.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_virtchnl_pf.c and ice_virtchnl_pf.h files are where most of the
code for implementing Single Root IOV virtualization resides. This code
includes support for bringing up and tearing down VFs, hooks into the
kernel SR-IOV netdev operations, and for handling virtchnl messages from
VFs.
In the future, we plan to support Scalable IOV in addition to Single
Root IOV as an alternative virtualization scheme. This implementation
will re-use some but not all of the code in ice_virtchnl_pf.c
To prepare for this future, we want to refactor and split up the code in
ice_virtchnl_pf.c into the following scheme:
* ice_vf_lib.[ch]
Basic VF structures and accessors. This is where scheme-independent
code will reside.
* ice_virtchnl.[ch]
Virtchnl message handling. This is where the bulk of the logic for
processing messages from VFs using the virtchnl messaging scheme will
reside. This is separated from ice_vf_lib.c because it is distinct
and has a bulk of the processing code.
* ice_sriov.[ch]
Single Root IOV implementation, including initialization and the
routines for interacting with SR-IOV based netdev operations.
* (future) ice_siov.[ch]
Scalable IOV implementation.
As a first step, lets assume that all of the code in
ice_virtchnl_pf.[ch] is for Single Root IOV. Rename this file to
ice_sriov.c and its header to ice_sriov.h
Future changes will further split out the code in these files following
the plan outlined here.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_sriov.c file primarily contains code which handles the logic for
mailbox overflow detection and some other utility functions related to
the virtualization mailbox.
The bulk of the SR-IOV implementation is actually found in
ice_virtchnl_pf.c, and this file isn't strictly SR-IOV specific.
In the future, the ice driver will support an additional virtualization
scheme known as Scalable IOV, and the code in this file will be used
for this alternative implementation.
Rename this file (and its associated header) to ice_vf_mbx.c, so that we
can later re-use the ice_sriov.c file as the SR-IOV specific file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308071155.21114-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This driver is based on the one for NPCM7xx, because the WPCM450 is a
predecessor of those SoCs. Notable differences:
- On WPCM450, the GPIO registers are not organized in multiple banks,
but rather placed continually into the same register block. This
affects how register offsets are computed.
- Pinmux nodes can explicitly select GPIO mode, whereas in the npcm7xx
driver, this happens automatically when a GPIO is requested.
Some functionality implemented in the hardware was (for now) left unused
in the driver, specifically blinking and pull-up/down.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220129115228.2257310-6-j.neuschaefer@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This driver can have up to two regmaps. If the second one is registered
its debugfs entry will have the same name as the first one and the
following error will be printed:
[ 2.242568] debugfs: Directory 'e2004064.pinctrl' with parent 'regmap' already present!
Give the second regmap a name to avoid this.
Fixes: 076d9e71bcf8 ("pinctrl: ocelot: convert pinctrl to regmap")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20220216122727.1005041-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Prior to commit ad96111e658a ("pinctrl: ocelot: combine get resource and
ioremap into single call") the resource index was 1, now it is 0. But 0
is the base region for the pinctrl block. Fix it.
I noticed this because there was an error that the memory region was
ioremapped twice.
Fixes: ad96111e658a ("pinctrl: ocelot: combine get resource and ioremap into single call")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20220216082020.981797-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
