summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-03-18auxdisplay: lcd2s: use module_i2c_driver to simplify the codeAndy Shevchenko
Use the module_i2c_driver() macro to make the code smaller and a bit simpler. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-03-18auxdisplay: lcd2s: make use of device property APIAndy Shevchenko
Make use of device property API in this driver so that both OF based system and ACPI based system can use this driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-03-18auxdisplay: lcd2s: Fix multi-line comment styleAndy Shevchenko
Fix multi-line comment style: - start sentences with Capital letter - use non-networking style of the first line Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-03-18Merge tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Revert of a nvme target feature (Hannes) - Fix a memory leak with rq-qos (Ming) * tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-block: nvmet: revert "nvmet: make discovery NQN configurable" block: release rq qos structures for queue without disk
2022-03-18Merge tag 'spi-nor/for-5.18' into mtd/nextMiquel Raynal
SPI NOR core changes: - move vendor specific code out of the core into vendor drivers. - unify all function and object names in the vendor modules. - make setup() callback optional to improve readability. - skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-03-18Merge tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "A few minor changes to finish things off, one mgag200 regression, imx fix and couple of panel changes. imx: - Don't test bus flags in atomic check mgag200: - Fix PLL setup on some models panel: - Fix bpp settings on Innolux G070Y2-L01 - Fix DRM_PANEL_EDP Kconfig dependencies" * tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm: drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check() drm/mgag200: Fix PLL setup for g200wb and g200ew
2022-03-18RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit()Dan Carpenter
This code checks "index" for an upper bound but it does not check for negatives. Change the type to unsigned to prevent underflows. Fixes: 3c3c1f141639 ("RDMA/nldev: Allow optional-counter status configuration through RDMA netlink") Link: https://lore.kernel.org/r/20220316083948.GC30941@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-18Merge branch 'thermal-hfi'Rafael J. Wysocki
Merge Intel Hardware Feedback Interface (HFI) thermal driver for 5.18-rc1 and update the intel-speed-select utility to support that driver. * thermal-hfi: tools/power/x86/intel-speed-select: v1.12 release tools/power/x86/intel-speed-select: HFI support tools/power/x86/intel-speed-select: OOB daemon mode thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub thermal: intel: hfi: Notify user space for HFI events thermal: netlink: Add a new event to notify CPU capabilities change thermal: intel: hfi: Enable notification interrupt thermal: intel: hfi: Handle CPU hotplug events thermal: intel: hfi: Minimally initialize the Hardware Feedback Interface x86/cpu: Add definitions for the Intel Hardware Feedback Interface x86/Documentation: Describe the Intel Hardware Feedback Interface
2022-03-18Merge branches 'thermal-powerclamp', 'thermal-int340x' and 'thermal-docs'Rafael J. Wysocki
Merge powerclamp thermal driver changes, int340x thermal driver changes and thermal documentation changes for 5.18-rc1: - Don't use bitmap_weight() in end_power_clamp() in the powerclamp driver (Yury Norov). - Update the OS policy capabilities handshake in the int340x thermal driver (Srinivas Pandruvada). - Increase the policies bitmap size in int340x (Srinivas Pandruvada). - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the int340x thermal driver (Rafael Wysocki). - Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang). - Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface documentation (Srinivas Pandruvada). - Fix bullet list warning in the thermal documentation (Randy Dunlap). * thermal-powerclamp: thermal: intel_powerclamp: don't use bitmap_weight() in end_power_clamp() * thermal-int340x: thermal: int340x: Update OS policy capability handshake thermal: int340x: Increase bitmap size thermal: Replace acpi_bus_get_device() thermal: int340x: Check for NULL after calling kmemdup() * thermal-docs: Documentation: thermal: DPTF Documentation thermal: fix Documentation bullet list warning
2022-03-18Merge branch 'pm-tools'Rafael J. Wysocki
Merge power management utilities changes for 5.18-rc1: - Add tracer tool for the amd-pstate driver (Jinzhou Su). - Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy). - Add AMD P-State support to the cpupower utility (Huang Rui). * pm-tools: Documentation: amd-pstate: add tracer tool introduction tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state tools/power/x86/intel_pstate_tracer: make tracer as a module cpufreq: amd-pstate: Add more tracepoint for AMD P-State module turbostat: fix PC6 displaying on some systems cpupower: Add "perf" option to print AMD P-State information cpupower: Add function to print AMD P-State performance capabilities cpupower: Move print_speed function into misc helper cpupower: Enable boost state support for AMD P-State module cpupower: Add AMD P-State sysfs definition and access helper cpupower: Introduce ACPI CPPC library cpupower: Add the function to get the sysfs value from specific table cpupower: Initial AMD P-State capability cpupower: Add the function to check AMD P-State enabled cpupower: Add AMD P-State capability flag tools/power/cpupower/{ToDo => TODO}: Rename the todo file tools: cpupower: fix typo in cpupower-idle-set(1) manpage
2022-03-18Merge branch 'powercap'Rafael J. Wysocki
Merge Dynamic Thermal Power Management (DTPM) changes for 5.18-rc1: - Add DTPM hierarchy description (Daniel Lezcano). - Change the locking scheme in DTPM (Daniel Lezcano). - Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer release (Daniel Lezcano). - Make dtpm_node_callback[] static (kernel test robot). - Fix spelling mistake "initialze" -> "initialize" in dtpm_create_hierarchy() (Colin Ian King). * powercap: powercap: DTPM: Fix spelling mistake "initialze" -> "initialize" powercap: DTPM: dtpm_node_callback[] can be static dtpm/soc/rk3399: Add the ability to unload the module powercap/dtpm_cpu: Add exit function powercap/dtpm: Move the 'root' reset place powercap/dtpm: Destroy hierarchy function powercap/dtpm: Fixup kfree for virtual node powercap/dtpm_cpu: Reset per_cpu variable in the release function powercap/dtpm: Change locking scheme rockchip/soc/drivers: Add DTPM description for rk3399 powercap/drivers/dtpm: Add dtpm devfreq with energy model support powercap/drivers/dtpm: Add CPU DT initialization support powercap/drivers/dtpm: Add hierarchy creation powercap/drivers/dtpm: Convert the init table section to a simple array
2022-03-18IB/iser: Fix error flow in case of registration failureMax Gurtovoy
During READ/WRITE preparation, in case of failure in memory registration using iser_reg_mem_fastreg we must unmap previously mapped iser task. Link: https://lore.kernel.org/r/20220308145546.8372-5-mgurtovoy@nvidia.com Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-18IB/iser: Generalize map/unmap dma tasksMax Gurtovoy
Avoid code duplication and add the mapping/unmapping of the protection buffers to the iser_dma_map_task_data/iser_dma_unmap_task_data functions. Link: https://lore.kernel.org/r/20220308145546.8372-4-mgurtovoy@nvidia.com Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-18IB/iser: Use iser_fr_desc as registration contextMax Gurtovoy
After removing the FMR support in iSER, there is only one type of registration context. Replace the void pointer with the explicit structure for registration (struct iser_fr_desc). Link: https://lore.kernel.org/r/20220308145546.8372-3-mgurtovoy@nvidia.com Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-18IB/iser: Remove iser_reg_data_sg helper functionMax Gurtovoy
Open coding it makes the code more readable and simple. Link: https://lore.kernel.org/r/20220308145546.8372-2-mgurtovoy@nvidia.com Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-03-18Merge branches 'pm-sleep', 'pm-domains' and 'pm-docs'Rafael J. Wysocki
Merge changes related to system sleep, PM domains changes and power management documentation changes for 5.18-rc1: - Fix load_image_and_restore() error path (Ye Bin). - Fix typos in comments in the system wakeup hadling code (Tom Rix). - Clean up non-kernel-doc comments in hibernation code (Jiapeng Chong). - Fix __setup handler error handling in system-wide suspend and hibernation core code (Randy Dunlap). - Add device name to suspend_report_result() (Youngjin Jang). - Make virtual guests honour ACPI S4 hardware signature by default (David Woodhouse). - Block power off of a parent PM domain unless child is in deepest state (Ulf Hansson). - Use dev_err_probe() to simplify error handling for generic PM domains (Ahmad Fatoum). - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo). - Document Intel uncore frequency scaling (Srinivas Pandruvada). * pm-sleep: PM: hibernate: Honour ACPI hardware signature by default for virtual guests PM: sleep: Add device name to suspend_report_result() PM: suspend: fix return value of __setup handler PM: hibernate: fix __setup handler error handling PM: hibernate: Clean up non-kernel-doc comments PM: sleep: wakeup: Fix typos in comments PM: hibernate: fix load_image_and_restore() error path * pm-domains: PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove() PM: domains: use dev_err_probe() to simplify error handling PM: domains: Prevent power off for parent unless child is in deepest state * pm-docs: Documentation: admin-guide: pm: Document uncore frequency scaling
2022-03-18Merge branches 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki
Merge cpufreq and cpuidle changes for 5.18-rc1: - Make the schedutil cpufreq governor use to_gov_attr_set() instead of open coding it (Kevin Hao). - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the cpufreq longhaul driver (Rafael Wysocki). - Unify show() and store() naming in cpufreq and make it use __ATTR_XX (Lianjie Zhang). - Make the intel_pstate driver use the EPP value set by the firmware by default (Srinivas Pandruvada). - Re-order the init checks in the powernow-k8 cpufreq driver (Mario Limonciello). - Make the ACPI processor idle driver check for architectural support for LPI to avoid using it on x86 by mistake (Mario Limonciello). - Add Sapphire Rapids Xeon support to the intel_idle driver (Artem Bityutskiy). - Add 'preferred_cstates' module argument to the intel_idle driver to work around C1 and C1E handling issue on Sapphire Rapids (Artem Bityutskiy). - Add core C6 optimization on Sapphire Rapids to the intel_idle driver (Artem Bityutskiy). - Optimize the haltpoll cpuidle driver a bit (Li RongQing). - Remove leftover text from intel_idle() kerneldoc comment and fix up white space in intel_idle (Rafael Wysocki). * pm-cpufreq: cpufreq: powernow-k8: Re-order the init checks cpufreq: intel_pstate: Use firmware default EPP cpufreq: unify show() and store() naming and use __ATTR_XX cpufreq: longhaul: Replace acpi_bus_get_device() cpufreq: schedutil: Use to_gov_attr_set() to get the gov_attr_set cpufreq: Move to_gov_attr_set() to cpufreq.h * pm-cpuidle: cpuidle: intel_idle: Drop redundant backslash at line end cpuidle: intel_idle: Update intel_idle() kerneldoc comment cpuidle: haltpoll: Call cpuidle_poll_state_init() later intel_idle: add core C6 optimization for SPR intel_idle: add 'preferred_cstates' module argument intel_idle: add SPR support ACPI: processor idle: Check for architectural support for LPI cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
2022-03-18regmap: allow a defined reg_base to be added to every addressColin Foster
There's an inconsistency that arises when a register set can be accessed internally via MMIO, or externally via SPI. The VSC7514 chip allows both modes of operation. When internally accessed, the system utilizes __iomem, devm_ioremap_resource, and devm_regmap_init_mmio. For SPI it isn't possible to utilize memory-mapped IO. To properly operate, the resource base must be added to the register before every operation. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/20220313224524.399947-3-colin.foster@in-advantage.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-18regmap: add configurable downshift for addressesColin Foster
Add an additional reg_downshift to be applied to register addresses before any register accesses. An example of a device that uses this is a VSC7514 chip, which require each register address to be downshifted by two if the access is performed over a SPI bus. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/20220313224524.399947-2-colin.foster@in-advantage.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-18Merge branches 'acpi-soc', 'acpi-video' and 'acpi-apei'Rafael J. Wysocki
Merge ACPI SoC drivers changes, ACPI backlight driver changes and APEI changes for 5.18-rc1: - Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know the exact type of the controller (Andy Shevchenko). - Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner Sembach). - Fix return value of __setup handlers in the APEI code (Randy Dunlap). - Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka Koskinen). - Limit printable size of BERT table data (Darren Hart). - Fix up HEST and GHES initialization (Shuai Xue). * acpi-soc: ACPI: LPSS: Provide an SSP type to the driver ACPI: LPSS: Constify properties member in struct lpss_device_desc ACPI: platform: Constify properties parameter in acpi_create_platform_device() * acpi-video: ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU * acpi-apei: ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device ACPI/APEI: Limit printable size of BERT table data ACPI: APEI: fix return value of __setup handlers ACPI: APEI: rename ghes_init() with an "acpi_" prefix ACPI: APEI: explicit init of HEST and GHES in apci_init()
2022-03-18Merge branches 'acpi-ec', 'acpi-cppc', 'acpi-fan' and 'acpi-battery'Rafael J. Wysocki
Merge ACPI EC driver changes, CPPC-related changes, ACPI fan driver changes and ACPI battery driver changes for 5.18-rc1: - Make wakeup events checks in the ACPI EC driver more straightforward and clean up acpi_ec_submit_event() (Rafael Wysocki). - Make it possible to obtain the CPU capacity with the help of CPPC information (Ionela Voinescu). - Improve fine grained fan control in the ACPI fan driver and document it (Srinivas Pandruvada). - Add device HID and quirk for Microsoft Surface Go 3 to the ACPI battery driver (Maximilian Luz). * acpi-ec: ACPI: EC: Rearrange code in acpi_ec_submit_event() ACPI: EC: Reduce indentation level in acpi_ec_submit_event() ACPI: EC: Do not return result from advance_transaction() * acpi-cppc: arm64, topology: enable use of init_cpu_capacity_cppc() arch_topology: obtain cpu capacity using information from CPPC x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc() * acpi-fan: Documentation/admin-guide/acpi: Add documentation for fine grain control ACPI: fan: Add additional attributes for fine grain control ACPI: fan: Properly handle fine grain control ACPI: fan: Optimize struct acpi_fan_fif ACPI: fan: Separate file for attributes creation ACPI: fan: Fix error reporting to user space * acpi-battery: ACPI: battery: Add device HID and quirk for Microsoft Surface Go 3
2022-03-18Merge branches 'acpi-pm', 'acpi-properties', 'acpi-misc' and 'acpi-x86'Rafael J. Wysocki
Merge ACPI power management changes, ACPI device properties handling changes, x86-specific ACPI changes and miscellaneous ACPI changes for 5.18-rc1: - Add power management debug messages related to suspend-to-idle in two places (Rafael Wysocki). - Fix __acpi_node_get_property_reference() return value and clean up that function (Andy Shevchenko, Sakari Ailus). - Fix return value of the __setup handler in the ACPI PM timer clock source driver (Randy Dunlap). - Clean up double words in two comments (Tom Rix). - Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and Nextbook Ares 8 (Hans de Goede). - Clean up frequency invariance handling on x86 in the ACPI CPPC library (Huang Rui). - Work around broken XSDT on the Advantech DAC-BJ01 board (Mark Cilissen). * acpi-pm: ACPI: EC / PM: Print additional debug message in acpi_ec_dispatch_gpe() ACPI: PM: Print additional debug message in acpi_s2idle_wake() * acpi-properties: ACPI: property: Get rid of redundant 'else' ACPI: properties: Consistently return -ENOENT if there are no more references * acpi-misc: clocksource: acpi_pm: fix return value of __setup handler ACPI: clean up double words in two comments * acpi-x86: ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC x86: Expose init_freq_invariance() to topology header x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
2022-03-18Bluetooth: ath3k: remove superfluous header filesMianhan Liu
ath3k.c hasn't use any macro or function declared in linux/device.h. Thus, these files can be removed from ath3k.c safely without affecting the compilation of the ./drivers/bluetooth module Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: bcm203x: remove superfluous header filesMianhan Liu
bcm203x.c hasn't use any macro or function declared in linux/atomic.h. Thus, these files can be removed from bcm203x.c safely without affecting the compilation of the ./drivers/bluetooth module Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: hci_bcm: Add the Asus TF103C to the bcm_broken_irq_dmi_tableHans de Goede
The DSDT for the Asus TF103C specifies a IOAPIC IRQ for the HCI -> host IRQ but this is not correct. Unlike the previous entries in the table, this time the correct GPIO to use instead is known; and the TF103C is battery powered making runtime-pm support more important. Extend the bcm_broken_irq_dmi_table mechanism to allow specifying the right GPIO instead of just always disabling runtime-pm and add an entry to it for the Asus TF103C. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Add WBS supportYake Yang
It is time to add wide band speech (WBS) support. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Add .btmtk_get_codec_config_dataYake Yang
add .btmtk_get_codec_config_data to get codec configuration data. In HFP offload usecase, controllers need to be set codec details before opening SCO. This callback function is used to fetch vendor specific codec config data. This is a preliminary patch to add the WBS support to the MT7921 driver. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Add .get_data_path_idYake Yang
Add .get_data_path_id to fetch data_path_id for MT7921 to support HFP offload use case. This is a preliminary patch to add the WBS support to the MT7921 driver. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Set HCI_QUIRK_VALID_LE_STATESYake Yang
The patch set HCI_QUIRK_VALID_LE_STATES to be consistent with the btusb for MT7921 and is required for the likes of experimental LE simultaneous roles. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interruptYake Yang
Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer. Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices") Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtkuart: fix error handling in mtk_hci_wmt_sync()Dan Carpenter
This code has an uninitialized variable warning: drivers/bluetooth/btmtkuart.c:184 mtk_hci_wmt_sync() error: uninitialized symbol 'wc'. But it also has error paths which have memory leaks. Fixes: 8f550f55b155 ("Bluetooth: btmtkuart: rely on BT_MTK module") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btrtl: Add support for RTL8852BMax Chou
Add the support for RTL8852B BT controller on USB interface. The necessary firmware file will be submitted to linux-firmware. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: hci_uart: add missing NULL check in h5_enqueuePavel Skripkin
Syzbot hit general protection fault in __pm_runtime_resume(). The problem was in missing NULL check. hu->serdev can be NULL and we should not blindly pass &serdev->dev somewhere, since it will cause GPF. Reported-by: syzbot+b9bd12fbed3485a3e51f@syzkaller.appspotmail.com Fixes: d9dd833cf6d2 ("Bluetooth: hci_h5: Add runtime suspend") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btusb: Use quirk to skip HCI_FLT_CLEAR_ALL on fake CSR controllersIsmael Ferreras Morezuelas
Another subset of the more recent batch of Chinese clones aren't specs-compliant and seem to lock up whenever they receive a HCI_OP_SET_EVENT_FLT with flt_type set to zero/HCI_FLT_CLEAR_ALL, which on Linux (until the recent HCI state-machine refactor) happened right at BR/EDR setup. As there are other less-straightforward ways of reaching those operations, this patch is still relevant. So, while all the previous efforts to wrangle the herd of fake CSRs seem to be paying off (and these also get detected as such) we still need to take care of this quirk; testers seem to agree that these dongles tend to work well enough afterwards. From some cursory USB packet capture on Windows it seems like that driver doesn't appear to use this clear-all functionality at all. This patch was tested on some really popular AliExpress-style dongles, in my case marked as "V5.0". Chip markings: UG8413, the backside of the PCB says "USB Dangel" (sic). Here is the `hciconfig -a` output; for completeness: hci0: Type: Primary Bus: USB BD Address: 00:1A:7D:DA:7X:XX ACL MTU: 679:8 SCO MTU: 48:16 UP RUNNING PSCAN ISCAN Features: 0xbf 0x3e 0x4d 0xfa 0xdb 0x3d 0x7b 0xc7 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: PERIPHERAL ACCEPT Name: 'CSR8510 A10.' Class: 0x7c0104 Service Classes: Rendering, Capturing, Object Transfer, Audio, Telephony Device Class: Computer, Desktop workstation HCI Version: 4.0 (0x6) Revision: 0x3120 LMP Version: 4.0 (0x6) Subversion: 0x22bb Manufacturer: Cambridge Silicon Radio (10) As well as the `lsusb -vv -d 0a12:0001`: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 224 Wireless bDeviceSubClass 1 Radio Frequency bDeviceProtocol 1 Bluetooth bMaxPacketSize0 64 idVendor 0x0a12 Cambridge Silicon Radio, Ltd idProduct 0x0001 Bluetooth Dongle (HCI mode) bcdDevice 88.91 iManufacturer 0 iProduct 2 BT DONGLE10 iSerial 0 bNumConfigurations 1 Also, changed the benign dmesg print that shows up whenever the generic force-suspend fails from bt_dev_err to bt_dev_warn; it's okay and done on a best-effort basis, not a problem if that does not work. Also, swapped the HCI subver and LMP subver numbers for the Barrot in the comment, which I copied wrong the last time around. Fixes: 81cac64ba258a ("Bluetooth: Deal with USB devices that are faking CSR vendor") Fixes: cde1a8a992875 ("Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers") Fixes: d74e0ae7e0303 ("Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134") Fixes: 0671c0662383e ("Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers") Fixes: f4292e2faf522 ("Bluetooth: btusb: Make the CSR clone chip force-suspend workaround more generic") Link: https://bugzilla.kernel.org/show_bug.cgi?id=60824 Link: https://gist.github.com/nevack/6b36b82d715dc025163d9e9124840a07 Cc: stable@vger.kernel.org Cc: Hans de Goede <hdegoede@redhat.com> Tested-by: Gonzalo Tornaría <tornaria@cmat.edu.uy> Tested-by: Mateus Lemos <lemonsmateus@gmail.com> Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtkuart: fix the conflict between mtk and msft vendor eventSean Wang
There is a conflict between MediaTek wmt event and msft vendor extension logic in the core layer since 145373cb1b1f ("Bluetooth: Add framework for Microsoft vendor extension") was introduced because we changed the type of mediatek wmt event to the type of msft vendor event in the driver. But the purpose we reported mediatek event to the core layer is for the diagnostic purpose with that we are able to see the full packet trace via monitoring socket with btmon. Thus, it is harmless we keep the original type of mediatek vendor event here to avoid breaking the msft extension function especially they can be supported by Mediatek future devices. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtkuart: add .set_bdaddr supportSean Wang
add .set_bdaddr support Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtkuart: rely on BT_MTK moduleSean Wang
Rely on btmtk module to reduce duplicated code Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btusb: Add missing Chicony device for Realtek RTL8723BETakashi Iwai
Chicony Electronics BT device with 04f2:b49f seems to be a missing entry for Realtek RTL8723BE. T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04f2 ProdID=b49f Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1196779 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Merge branches 'acpica', 'acpi-osl', 'acpi-bus' and 'acpi-tables'Rafael J. Wysocki
Merge ACPICA changes, ACPI OS-layer changes, ACPI bus-type and _OSC support changes and ACPI tables parsing changes for 5.18-rc1: - Use uintptr_t and offsetof() in the ACPICA code to avoid compiler warnings regarding NULL pointer arithmetic (Rafael Wysocki). - Fix possible NULL pointer dereference in acpi_ns_walk_namespace() when passed "acpi=off" in the command line (Rafael Wysocki). - Fix and clean up acpi_os_read/write_port() (Rafael Wysocki). - Introduce acpi_bus_for_each_dev() and use it for walking all ACPI device objects in the Type C code (Rafael Wysocki). - Fix the _OSC platform capabilities negotioation and prevent CPPC from being used if the platform firmware indicates that it not supported via _OSC (Rafael Wysocki). - Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka Koskinen, Robert Kiraly). * acpica: ACPICA: Avoid walking the ACPI Namespace if it is not there ACPICA: Use uintptr_t and offsetof() in Linux kernel builds * acpi-osl: ACPI: OSL: Fix and clean up acpi_os_read/write_port() * acpi-bus: ACPI: bus: Avoid using CPPC if not supported by firmware Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag" ACPI: bus: Introduce acpi_bus_for_each_dev() * acpi-tables: ACPI: tables: Add AGDI to the list of known table signatures ACPI: tables: Add CEDT signature to the list of known tables
2022-03-18spi: fsi: Implement a timeout for polling statusEddie James
The data transfer routines must poll the status register to determine when more data can be shifted in or out. If the hardware gets into a bad state, these polling loops may never exit. Prevent this by returning an error if a timeout is exceeded. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20220317211426.38940-1-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-18regulator: qcom-rpmh: Add support for SDX65Rohit Agarwal
Add support from RPMH regulators found in SDX65 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Link: https://lore.kernel.org/r/1647410837-22537-3-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-18Merge tag 'wireless-next-2022-03-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.18 Third set of patches for v5.18. Smaller set this time, support for mt7921u and some work on MBSSID support. Also a workaround for rfkill userspace event. Major changes: mac80211 * MBSSID beacon handling in AP mode rfkill * make new event layout opt-in to workaround buggy user space rtlwifi * support On Networks N150 device id mt76 * mt7915: MBSSID and 6 GHz band support * new driver mt7921u ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18clocksource: acpi_pm: fix return value of __setup handlerRandy Dunlap
__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) environment strings. The __setup() handler interface isn't meant to handle negative return values -- they are non-zero, so they mean "handled" (like a return value of 1 does), but that's just a quirk. So return 1 from parse_pmtmr(). Also print a warning message if kstrtouint() returns an error. Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-18vt_ioctl: fix potential spectre v1 in VT_DISALLOCATEXiaomeng Tong
In VT_ACTIVATE an almost identical code path has been patched with array_index_nospec. In the VT_DISALLOCATE path, the arg is the user input from a system call argument and lately used as a index for vc_cons[index].d access, which can be reached through path like vt_disallocate->vc_busy or vt_disallocate->vc_deallocate. For consistency both code paths should have the same mitigations applied. Also, the code style is adjusted as suggested by Jiri. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220314122921.31223-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18drivers/base/dd.c : Remove the initial value of the global variablelizhe
The global variable driver_deferred_probe_enable has a default value of false and does not need to be initialized to false. Signed-off-by: lizhe <sensor1010@163.com> Link: https://lore.kernel.org/r/20220309135418.31101-1-sensor1010@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18devres: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220314115354.144023-19-Julia.Lawall@inria.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18base: soc: Make soc_device_match() simpler and easier to readGeert Uytterhoeven
The function soc_device_match() is difficult to read for various reasons: - There are two loop conditions using different styles: "while (...)" (which is BTW always true) vs. "if ... break", - The are two return condition using different logic: "if ... return foo" vs. "if ... else return bar". Make the code easier to read by: 1. Removing the always-true "!ret" loop condition, and dropping the now unneeded pre-initialization of "ret", 2. Converting "if ... break" to a proper "while (...)" loop condition, 3. Inverting the logic of the second return condition. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/9f9107c06f7d065ae6581e5290ef5d72f7298fd1.1646132835.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18driver core: dd: fix return value of __setup handlerRandy Dunlap
When "driver_async_probe=nulltty" is used on the kernel boot command line, it causes an Unknown parameter message and the string is added to init's environment strings, polluting them. Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6 driver_async_probe=nulltty", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 driver_async_probe=nulltty Change the return value of the __setup function to 1 to indicate that the __setup option has been handled. Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 1ea61b68d0f8 ("async: Add cmdline option to specify drivers to be async probed") Cc: Feng Tang <feng.tang@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Reviewed-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220301041829.15137-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18driver core: Refactor sysfs and drv/bus remove hooksRob Herring
There are 3 copies of the same device sysfs cleanup and drv/bus remove() hooks used for probe failure, testing re-probing, and device unbinding. Let's refactor the code to its own function. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220223225257.1681968-3-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18driver core: Refactor multiple copies of device cleanupRob Herring
There are 3 copies of the same device cleanup code used for probe failure, testing re-probing, and device unbinding. Changes to this code often miss at least one of the copies of the code. See commits d0243bbd5dd3 ("drivers core: Free dma_range_map when driver probe failed") and d8f7a5484f21 ("driver core: Free DMA range map when device is released") for example. Let's refactor the code to its own function. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220223225257.1681968-2-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 20:23:04 +0000