| Age | Commit message (Collapse) | Author |
|---|
|
Pull ARM and clkdev fixes from Russell King:
- Fix clkdev - erroring out on long strings causes boot failures, so
don't do this. Still warn about the over-sized strings (which will
never match and thus their registration with clkdev is useless)
- Fix for ftrace with frame pointer unwinder with recent GCC changing
the way frames are stacked.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9405/1: ftrace: Don't assume stack frames are contiguous in memory
clkdev: don't fail clkdev_alloc() if over-sized
|
|
In order to improve performance of typical scenarios we can try to insert
the entire vma on fault. This accelerates typical cases, such as when
the MMIO region is DMA mapped by QEMU. The vfio_iommu_type1 driver will
fault in the entire DMA mapped range through fixup_user_fault().
In synthetic testing, this improves the time required to walk a PCI BAR
mapping from userspace by roughly 1/3rd.
This is likely an interim solution until vmf_insert_pfn_{pmd,pud}() gain
support for pfnmaps.
Suggested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/all/Zl6XdUkt%2FzMMGOLF@yzhao56-desk.sh.intel.com/
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240607035213.2054226-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Make it again possible for sparse to verify that blk_status_t and Unix
error codes are used in the proper context by making nbd_send_cmd()
return a blk_status_t instead of an integer.
No functionality has been changed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ bvanassche: added description and made two small formatting changes ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240604221531.327131-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The X-Powers AXP717 PMIC has separate input supply pins for each group
of LDOs, so they are not all using the same DCDC1 input, as described
currently.
Replace the "supply" member of each LDO description with the respective
group supply name, so that the supply dependencies can be correctly
described in the devicetree.
Also fix two off-by-ones in the regulator macros, after some double
checking the numbers against the datasheet. This uncovered a bug in the
datasheet: add a comment to document this.
Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20240418000736.24338-3-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The spec doesn't mandate that the first two double words (aka results)
for the command queue entry need to be set to 0 when they are not
used (not specified). Though, the target implemention returns 0 for TCP
and FC but not for RDMA.
Let's make RDMA behave the same and thus explicitly initializing the
result field. This prevents leaking any data from the stack.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The id override functions return a status which is not propagated to the
caller.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If a discard request needs to be retried, and that retry may fail before
a new special payload is added, a double free will result. Clear the
RQF_SPECIAL_LOAD when the request is cleaned.
Signed-off-by: Chunguang Xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
data
This patch prevents from registering thermal entries and letting the
driver misbehave if efuse data is invalid. A device is not properly
calibrated if the golden temperature is zero.
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240604-mtk-thermal-calib-check-v2-1-8f258254051d@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The user mapped intergity is copied back and unpinned by
bio_integrity_free which is a low-level routine. Do it via the submitter
rather than doing it in the low-level block layer code, to split the
submitter side from the consumer side of the bio.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240610111144.14647-1-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a couple of outdated addresses that are still visible
in the Git history, add them to .mailmap.
While at it, replace one in the comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When an I2C adapter acts only as a slave, it should not claim to
support I2C master capabilities.
Fixes: 5b6d721b266a ("i2c: designware: enable SLAVE in platform module")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Luis Oliveira <lolivei@synopsys.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Jan Dabros <jsd@semihalf.com>
Cc: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
When an I2C adapter acts only as a slave, it should not claim to
support I2C master capabilities.
Fixes: 9d3ca54b550c ("i2c: at91: added slave mode support")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Juergen Fitschen <me@jue.yt>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Cc: Andi Shyti <andi.shyti@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Ramp values are inverted. This caused wrong values written to register
when ramp values were defined in device tree.
Invert values in table to fix this.
Signed-off-by: Kalle Niemi <kaleposti@gmail.com>
Fixes: 1aad39001e85 ("regulator: Support ROHM BD71815 regulators")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ZmmJXtuVJU6RgQAH@latitude5580
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After recent changes in intel_pstate, global.turbo_disabled is only set
at the initialization time and never changed. However, it turns out
that on some systems the "turbo disabled" bit in MSR_IA32_MISC_ENABLE,
the initial state of which is reflected by global.turbo_disabled, can be
flipped later and there should be a way to take that into account (other
than checking that MSR every time the driver runs which is costly and
useless overhead on the vast majority of systems).
For this purpose, notice that before the changes in question,
store_no_turbo() contained a turbo_is_disabled() check that was used
for updating global.turbo_disabled if the "turbo disabled" bit in
MSR_IA32_MISC_ENABLE had been flipped and that functionality can be
restored. Then, users will be able to reset global.turbo_disabled
by writing 0 to no_turbo which used to work before on systems with
flipping "turbo disabled" bit.
This guarantees the driver state to remain in sync, but READ_ONCE()
annotations need to be added in two places where global.turbo_disabled
is accessed locklessly, so modify the driver to make that happen.
Fixes: 0940f1a8011f ("cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization")
Closes: https://lore.kernel.org/linux-pm/bf3ebf1571a4788e97daf861eb493c12d42639a3.camel@xry111.site
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The flags variable is incorrectly checked while it is still cleared and
has not been assigned any value yet.
Fix it.
Fixes: a615323f7f90 ("wifi: iwlwifi: mvm: always apply 6 GHz probe limitations")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.291c33f9a283.Id651fe69828aebce177b49b2316c5780906f1b37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For using the ROC command, check that the ROC version
is *greater or equal* to 3, rather than *equal* to 3.
The ROC version was added to the TLV starting from
version 3.
Fixes: 67ac248e4db0 ("wifi: iwlwifi: mvm: implement ROC version 3")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.93d86cd188ad.Iceadef5a2f3cfa4a127e94a0405eba8342ec89c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Unlock the mvm mutex before returning from a
function with the mutex locked.
Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.96cb956db4af.Ib468cbad38959910977b5581f6111ab0afae9880@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
This driver users the component model and shutdown happens in the base
driver. The "drvdata" for this driver will always be valid if
shutdown() is called and as of commit 2a073968289d
("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a
noop") we don't need to confirm that "drm" is non-NULL.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611102744.v2.1.I2b014f90afc4729b6ecc7b5ddd1f6dedcea4625b@changeid
|
|
Based on grepping through the source code, this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time.
This is important because drm_atomic_helper_shutdown() will cause
panels to get disabled cleanly which may be important for their power
sequencing. Future changes will remove any custom powering off in
individual panel drivers so the DRM drivers need to start getting this
right.
The fact that we should call drm_atomic_helper_shutdown() in the case of
OS shutdown comes straight out of the kernel doc "driver instance
overview" in drm_drv.c.
[geert: shmob_drm_remove() already calls drm_atomic_helper_shutdown]
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230901164111.RFT.15.Iaf638a1d4c8b3c307a6192efabb4cbb06b195f15@changeid
[geert: s/drm_helper_force_disable_all/drm_atomic_helper_shutdown/]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/17c6a5a668e5975f871b77fb1fca6711a0799d9e.1718176895.git.geert+renesas@glider.be
|
|
When multiple streams are in use, multiple TDs might be in flight when
an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for
each, to ensure everything is reset properly and the caches cleared.
Change the logic so that any N>1 TDs found active for different streams
are deferred until after the first one is processed, calling
xhci_invalidate_cancelled_tds() again from xhci_handle_cmd_set_deq() to
queue another command until we are done with all of them. Also change
the error/"should never happen" paths to ensure we at least clear any
affected TDs, even if we can't issue a command to clear the hardware
cache, and complain loudly with an xhci_warn() if this ever happens.
This problem case dates back to commit e9df17eb1408 ("USB: xhci: Correct
assumptions about number of rings per endpoint.") early on in the XHCI
driver's life, when stream support was first added.
It was then identified but not fixed nor made into a warning in commit
674f8438c121 ("xhci: split handling halted endpoints into two steps"),
which added a FIXME comment for the problem case (without materially
changing the behavior as far as I can tell, though the new logic made
the problem more obvious).
Then later, in commit 94f339147fc3 ("xhci: Fix failure to give back some
cached cancelled URBs."), it was acknowledged again.
[Mathias: commit 94f339147fc3 ("xhci: Fix failure to give back some cached
cancelled URBs.") was a targeted regression fix to the previously mentioned
patch. Users reported issues with usb stuck after unmounting/disconnecting
UAS devices. This rolled back the TD clearing of multiple streams to its
original state.]
Apparently the commit author was aware of the problem (yet still chose
to submit it): It was still mentioned as a FIXME, an xhci_dbg() was
added to log the problem condition, and the remaining issue was mentioned
in the commit description. The choice of making the log type xhci_dbg()
for what is, at this point, a completely unhandled and known broken
condition is puzzling and unfortunate, as it guarantees that no actual
users would see the log in production, thereby making it nigh
undebuggable (indeed, even if you turn on DEBUG, the message doesn't
really hint at there being a problem at all).
It took me *months* of random xHC crashes to finally find a reliable
repro and be able to do a deep dive debug session, which could all have
been avoided had this unhandled, broken condition been actually reported
with a warning, as it should have been as a bug intentionally left in
unfixed (never mind that it shouldn't have been left in at all).
> Another fix to solve clearing the caches of all stream rings with
> cancelled TDs is needed, but not as urgent.
3 years after that statement and 14 years after the original bug was
introduced, I think it's finally time to fix it. And maybe next time
let's not leave bugs unfixed (that are actually worse than the original
bug), and let's actually get people to review kernel commits please.
Fixes xHC crashes and IOMMU faults with UAS devices when handling
errors/faults. Easiest repro is to use `hdparm` to mark an early sector
(e.g. 1024) on a disk as bad, then `cat /dev/sdX > /dev/null` in a loop.
At least in the case of JMicron controllers, the read errors end up
having to cancel two TDs (for two queued requests to different streams)
and the one that didn't get cleared properly ends up faulting the xHC
entirely when it tries to access DMA pages that have since been unmapped,
referred to by the stale TDs. This normally happens quickly (after two
or three loops). After this fix, I left the `cat` in a loop running
overnight and experienced no xHC failures, with all read errors
recovered properly. Repro'd and tested on an Apple M1 Mac Mini
(dwc3 host).
On systems without an IOMMU, this bug would instead silently corrupt
freed memory, making this a security bug (even on systems with IOMMUs
this could silently corrupt memory belonging to other USB devices on the
same controller, so it's still a security bug). Given that the kernel
autoprobes partition tables, I'm pretty sure a malicious USB device
pretending to be a UAS device and reporting an error with the right
timing could deliberately trigger a UAF and write to freed memory, with
no user action.
[Mathias: Commit message and code comment edit, original at:]
https://lore.kernel.org/linux-usb/20240524-xhci-streams-v1-1-6b1f13819bea@marcan.st/
Fixes: e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.")
Fixes: 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs.")
Fixes: 674f8438c121 ("xhci: split handling halted endpoints into two steps")
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240611120610.3264502-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As described in commit 8f873c1ff4ca ("xhci: Blacklist using streams on the
Etron EJ168 controller"), EJ188 have the same issue as EJ168, where Streams
do not work reliable on EJ188. So apply XHCI_BROKEN_STREAMS quirk to EJ188
as well.
Cc: stable@vger.kernel.org
Signed-off-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240611120610.3264502-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As described in commit c877b3b2ad5c ("xhci: Add reset on resume quirk for
asrock p67 host"), EJ188 have the same issue as EJ168, where completely
dies on resume. So apply XHCI_RESET_ON_RESUME quirk to EJ188 as well.
Cc: stable@vger.kernel.org
Signed-off-by: Kuangyi Chiang <ki.chiang65@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240611120610.3264502-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The transferred length is set incorrectly for cancelled bulk
transfer TDs in case the bulk transfer ring stops on the last transfer
block with a 'Stop - Length Invalid' completion code.
length essentially ends up being set to the requested length:
urb->actual_length = urb->transfer_buffer_length
Length for 'Stop - Length Invalid' cases should be the sum of all
TRB transfer block lengths up to the one the ring stopped on,
_excluding_ the one stopped on.
Fix this by always summing up TRB lengths for 'Stop - Length Invalid'
bulk cases.
This issue was discovered by Alan Stern while debugging
https://bugzilla.kernel.org/show_bug.cgi?id=218890, but does not
solve that bug. Issue is older than 4.10 kernel but fix won't apply
to those due to major reworks in that area.
Tested-by: Pierre Tomon <pierretom+12@ik.me>
Cc: stable@vger.kernel.org # v4.10+
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240611120610.3264502-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
parameters
The current cbs parameter depends on speed after uplinking,
which is not needed and will report a configuration error
if the port is not initially connected. The UAPI exposed by
tc-cbs requires userspace to recalculate the send slope anyway,
because the formula depends on port_transmit_rate (see man tc-cbs),
which is not an invariant from tc's perspective. Therefore, we
use offload->sendslope and offload->idleslope to derive the
original port_transmit_rate from the CBS formula.
Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240608143524.2065736-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TSO currently fails when the skb's gso_type field has more than one bit
set.
TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a
few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes
virtualization, such as QEMU, a real use-case.
The gso_type and gso_size fields as passed from userspace in
virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type
|= SKB_GSO_DODGY to force the packet to enter the software GSO stack
for verification.
This issue might similarly come up when the CWR bit is set in the TCP
header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit
to be set.
Fixes: a57e5de476be ("gve: DQO: Add TX path")
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
v2 - Remove unnecessary comments, remove line break between fixes tag
and signoffs.
v3 - Add back unrelated empty line removal.
Link: https://lore.kernel.org/r/20240610225729.2985343-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to
the HBA if a read or write command directed at an ATA device should be
translated to an NCQ read/write command with the high prioiryt bit set
when the request uses the RT priority class and the user has enabled NCQ
priority through sysfs.
However, unlike the mpt3sas driver, the mpi3mr driver does not define
the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so
the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never
actually set and NCQ Priority cannot ever be used.
Fix this by defining these missing atributes to allow a user to check if
an ATA device supports NCQ priority and to enable/disable the use of NCQ
priority. To do this, lift the function scsih_ncq_prio_supp() out of the
mpt3sas driver and make it the generic SCSI SAS transport function
sas_ata_ncq_prio_supported(). Nothing in that function is hardware
specific, so this function can be used in both the mpt3sas driver and
the mpi3mr driver.
Reported-by: Scott McCoy <scott.mccoy@wdc.com>
Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In ufshcd_clock_scaling_prepare(), after SCSI layer is blocked,
ufshcd_pending_cmds() is called to check whether there are pending
transactions or not. And only if there are no pending transactions can we
proceed to kickstart the clock scaling sequence.
ufshcd_pending_cmds() traverses over all SCSI devices and calls
sbitmap_weight() on their budget_map. sbitmap_weight() can be broken down
to three steps:
1. Calculate the nr outstanding bits set in the 'word' bitmap.
2. Calculate the nr outstanding bits set in the 'cleared' bitmap.
3. Subtract the result from step 1 by the result from step 2.
This can lead to a race condition as outlined below:
Assume there is one pending transaction in the request queue of one SCSI
device, say sda, and the budget token of this request is 0, the 'word' is
0x1 and the 'cleared' is 0x0.
1. When step 1 executes, it gets the result as 1.
2. Before step 2 executes, block layer tries to dispatch a new request to
sda. Since the SCSI layer is blocked, the request cannot pass through
SCSI but the block layer would do budget_get() and budget_put() to
sda's budget map regardless, so the 'word' has become 0x3 and 'cleared'
has become 0x2 (assume the new request got budget token 1).
3. When step 2 executes, it gets the result as 1.
4. When step 3 executes, it gets the result as 0, meaning there is no
pending transactions, which is wrong.
Thread A Thread B
ufshcd_pending_cmds() __blk_mq_sched_dispatch_requests()
| |
sbitmap_weight(word) |
| scsi_mq_get_budget()
| |
| scsi_mq_put_budget()
| |
sbitmap_weight(cleared)
...
When this race condition happens, the clock scaling sequence is started
with transactions still in flight, leading to subsequent hibernate enter
failure, broken link, task abort and back to back error recovery.
Fix this race condition by quiescing the request queues before calling
ufshcd_pending_cmds() so that block layer won't touch the budget map when
ufshcd_pending_cmds() is working on it. In addition, remove the SCSI layer
blocking/unblocking to reduce redundancies and latencies.
Fixes: 8d077ede48c1 ("scsi: ufs: Optimize the command queueing code")
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/1717754818-39863-1-git-send-email-quic_ziqichen@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For SCSI devices supporting the Command Duration Limits feature set, the
user can enable/disable this feature use through the sysfs device attribute
"cdl_enable". This attribute modification triggers a call to
scsi_cdl_enable() to enable and disable the feature for ATA devices and set
the scsi device cdl_enable field to the user provided bool value. For SCSI
devices supporting CDL, the feature set is always enabled and
scsi_cdl_enable() is reduced to setting the cdl_enable field.
However, for ATA devices, a drive may spin-up with the CDL feature enabled
by default. But the SCSI device cdl_enable field is always initialized to
false (CDL disabled), regardless of the actual device CDL feature
state. For ATA devices managed by libata (or libsas), libata-core always
disables the CDL feature set when the device is attached, thus syncing the
state of the CDL feature on the device and of the SCSI device cdl_enable
field. However, for ATA devices connected to a SAS HBA, the CDL feature is
not disabled on scan for ATA devices that have this feature enabled by
default, leading to an inconsistent state of the feature on the device with
the SCSI device cdl_enable field.
Avoid this inconsistency by adding a call to scsi_cdl_enable() in
scsi_cdl_check() to make sure that the device-side state of the CDL feature
set always matches the scsi device cdl_enable field state. This implies
that CDL will always be disabled for ATA devices connected to SAS HBAs,
which is consistent with libata/libsas initialization of the device.
Reported-by: Scott McCoy <scott.mccoy@wdc.com>
Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240607012507.111488-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
'init_exec' is unused since
commit cb75d97e9c77 ("drm/nouveau: implement devinit subdev, and new
init table parser")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517232617.230767-1-linux@treblig.org
|
|
Invoking the governor .trip_crossed() callback for critical and hot
trips is pointless because they are handled directly by the core,
so make thermal_governor_trip_crossed() avoid doing that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some cooling device target state checks in bang_bang_control()
done before setting the new target state are not necessary after
recent changes, so drop them.
Also avoid updating the target state before checking it for
unexpected values.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When accessing trip temperature and hysteresis without locking, it is
better to use READ_ONCE() to prevent compiler optimizations possibly
affecting the read from being applied.
Of course, for the READ_ONCE() to be effective, WRITE_ONCE() needs to
be used when updating their values.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Modify thermal_zone_set_trips() to use trip thresholds instead of
computing the low temperature for each trip to avoid deriving both
the high and low temperature levels from the same trip (which may
happen if the zone temperature falls into the hysteresis range of
one trip).
Accordingly, make __thermal_zone_device_update() call
thermal_zone_set_trips() later, when threshold values have been
updated for all trips.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Drop the pointless double underline prefix from the function name as per
the subject.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Use the same set of trip type names in sysfs and in the thermal debug
code output.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The tz_dbg local variable assignments in thermal_debug_tz_trip_up(),
thermal_debug_tz_trip_down(), and thermal_debug_update_trip_stats()
need not be carried out under thermal_dbg->lock, so move them from
under that lock (to avoid possible future confusion).
While at it, reorder local variable definitions in
thermal_debug_tz_trip_up() for more clarity.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Notice that the maximum temperature above the trip point must be the
same for all of the trip points involved in a given mitigation episode,
so it need not be computerd for each of them separately.
It is sufficient to compute the maximum temperature for the mitigation
episode as a whole and print it accordingly, so do that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Initialize the trip_temp field in struct trip_stats to
THERMAL_TEMP_INVALID and adjust the check for trips without
statistics in tze_seq_show() to look at that field instead of
comparing min and max.
This will mostly be useful to simplify subsequent changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Print temperature units as m°C rather than °mC (the meaning of which is
unclear) and add time unit to the duration column.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Because mitigation episode duration is printed in milliseconds, there
is no reason to print timestamp information for mitigation episodes in
smaller units which also makes it somewhat harder to interpret the
numbers.
Print it in milliseconds for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Because thermal zone handling by the thermal core is started from
scratch during resume from system-wide suspend, prevent the debug
code from extending mitigation episodes beyond that point by ending
the mitigation episode currently in progress, if any, for each thermal
zone.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add a helper for updating trip point overstepping duration to be called
from thermal_debug_tz_trip_down().
Subsequently, it will also be used during resume from system-wide
suspend.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Consider a thermal zone with one passive trip point, a cooling device
with 3 states (0, 1, 2) bound to it, passive polling enabled (nonzero
passive_delay_jiffies) and no regular polling (polling_delay_jiffies
equal to 0) that is managed by the Step-Wise governor. Suppose that
the initial state of the cooling device is 0 and the zone temperature
is below the trip point to start with.
When the trip point is crossed, tz->passive is incremented by the
thermal core and the governor's .manage() callback is invoked. It
sets 'throttle' to 'true' for the trip in question and
get_target_state() returns 1 for the instance corresponding to the
cooling device (say that 'upper' and 'lower' are set to 2 and 0 for
it, respectively), so its state changes to 1.
Passive polling is still active for the zone, so next time the
temperature is updated, the governor's .manage() callback will be
invoked again. If the temperature is still rising, it will change
the state of the cooling device to 2.
Now suppose that next time the zone temperature is updated, it falls
below the trip point, so tz->passive is decremented for the zone (say
it becomes 0 then) and the governor's .manage() callbacks runs.
It finds that the temperature trend for the zone is 'falling' and
'throttle' will be set to 'false' for the trip in question, so the
cooling device's state will be changed to 1. However, because
tz->polling is 0 for the zone, the governor's .manage() callback
may not be invoked again for a long time and the cooling device's
state will not be reset back to 0.
This can happen because commit 042a3d80f118 ("thermal: core: Move
passive polling management to the core") removed passive polling
management from the Step-Wise governor.
Before that change, thermal_zone_trip_update() would bump up
tz->passive when changing the target state for a thermal instance
from "no target" to a specific value and it would drop tz->passive
when changing it back to "no target" which would cause passive
polling to be active for the zone until the governor has reset the
states of all cooling devices. In particular, in the example above
tz->passive would be incremented when changing the state of the
cooling device from 0 to 1 and then it would be still nonzero when
the state of the cooling device was changed from 2 to 1.
To prevent this problem from occurring, restore the passive polling
management in the Step-Wise governor by partially reverting the
commit in question and update the comment in the restored code
to explain its role more clearly.
Fixes: 042a3d80f118 ("thermal: core: Move passive polling management to the core")
Closes: https://lore.kernel.org/linux-pm/ZmVfcEOxmjUHZTSX@hovoldconsulting.com
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix missing kmem_cache_destroy() for ioat_sed_cache in
ioat_exit_module().
Noticed via:
```
modprobe ioatdma
rmmod ioatdma
modprobe ioatdma
debugfs: Directory 'ioat_sed_ent' with parent 'slab' already present!
```
Fixes: c0f28ce66ecf ("dmaengine: ioatdma: move all the init routines")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240514-ioatdma_fixes-v1-1-2776a0913254@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Kbuild does not support having a source file compiled multiple times
and linked into distinct modules, or built-in and modular at the
same time. For fs-edma, there are two common components that are
linked into the fsl-edma.ko for Arm and PowerPC, plus the mcf-edma.ko
module on Coldfire. This violates the rule for compile-testing:
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is added to multiple modules: fsl-edma mcf-edma
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added to multiple modules: fsl-edma mcf-edma
I tried splitting out the common parts into a separate modules, but
that adds back the complexity that a cleanup patch removed, and it
gets harder with the addition of the tracepoints.
As a minimal workaround, address it at the Kconfig level, by disallowing
the broken configurations.
Link: https://lore.kernel.org/lkml/20240110232255.1099757-1-arnd@kernel.org/
Fixes: 66aac8ea0a6c ("dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240528115440.2965975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If probing fails we end up with leaking ioatdma_device and each
allocated channel.
Following kmemleak easy to reproduce by injecting an error in
ioat_alloc_chan_resources() when doing ioat_dma_self_test().
unreferenced object 0xffff888014ad5800 (size 1024): [..]
[<ffffffff827692ca>] kmemleak_alloc+0x4a/0x80
[<ffffffff81430600>] kmalloc_trace+0x270/0x2f0
[<ffffffffa000b7d1>] ioat_pci_probe+0xc1/0x1c0 [ioatdma]
[..]
repeated for each ioatdma channel:
unreferenced object 0xffff8880148e5c00 (size 512): [..]
[<ffffffff827692ca>] kmemleak_alloc+0x4a/0x80
[<ffffffff81430600>] kmalloc_trace+0x270/0x2f0
[<ffffffffa0009641>] ioat_enumerate_channels+0x101/0x2d0 [ioatdma]
[<ffffffffa000b266>] ioat3_dma_probe+0x4d6/0x970 [ioatdma]
[<ffffffffa000b891>] ioat_pci_probe+0x181/0x1c0 [ioatdma]
[..]
Fixes: bf453a0a18b2 ("dmaengine: ioat: Support in-use unbind")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240528-ioatdma-fixes-v2-3-a9f2fbe26ab1@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure we are disabling interrupts and destroying DMA pool if
pcie_capability_read/write_word() call failed.
Fixes: 511deae0261c ("dmaengine: ioatdma: disable relaxed ordering for ioatdma")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240528-ioatdma-fixes-v2-2-a9f2fbe26ab1@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix leaking ioatdma_device if I/OAT version is less than IOAT_VER_3_0.
Fixes: bf453a0a18b2 ("dmaengine: ioat: Support in-use unbind")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240528-ioatdma-fixes-v2-1-a9f2fbe26ab1@yadro.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The of_k3_udma_glue_parse_chn_by_id() helper function erroneously
invokes "of_node_put()" on the "udmax_np" device-node passed to it,
without having incremented its reference count at any point. Fix it.
Fixes: 81a1f90f20af ("dmaengine: ti: k3-udma-glue: Add function to parse channel by ID")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Peter Ujfalusi@gmail.com
Link: https://lore.kernel.org/r/20240602013319.2975894-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use list_for_each_entry_safe() to allow iterating through the list and
deleting the entry in the iteration process. The descriptor is freed via
idxd_desc_complete() and there's a slight chance may cause issue for
the list iterator when the descriptor is reused by another thread
without it being deleted from the list.
Fixes: 16e19e11228b ("dmaengine: idxd: Fix list corruption in description completion")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240603012444.11902-1-lirongqing@baidu.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
