| Age | Commit message (Collapse) | Author |
|---|
|
When reading the interrupt status after a FW reset handshake
timeout, read the actual value not the mask for the non-MSIX
case.
Fixes: ab606dea80c4 ("wifi: iwlwifi: pcie: add support for the reset handshake in MSI")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250604061200.87a849a55086.I2f8571aafa55aa3b936a30b938de9d260592a584@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
In case of an error during init, in_hw_restart will be set, but it will
never get cleared.
Instead, we will retry to init again, and then we will act like we are in a
restart when we are actually not.
This causes (among others) to a NULL pointer dereference when canceling
rx_omi::finished_work, that was not even initialized, because we thought
that we are in hw_restart.
Set in_hw_restart to true only if the fw is running, then we know that
FW was loaded successfully and we are not going to the retry loop.
Fixes: 7391b2a4f7db ("wifi: iwlwifi: rework firmware error handling")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250604061200.e0040e0a4b09.Iae469a0abe6bfa3c26d8a88c066bad75c2e8f121@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
After using DEFINE_RAW_FLEX, cmd is a pointer to iwl_rxq_sync_cmd,
and not a variable containing both the command and notification.
Adjust hcmd->data and hcmd->len assignment as well.
Fixes: 7438843df8cf ("wifi: iwlwifi: mvm: Avoid -Wflex-array-member-not-at-end warning")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250604031321.2277481-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar files
(Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU
to simplify build testing and avoid inadvertent build regressions (Arnd
Bergmann)
- Update driver path in PCI NVMe function documentation (Rick Wertenbroek)
- Remove unused pci_printk() (Ilpo Järvinen)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
- Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof
Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan
Sadhasivam)
* pci/misc:
MAINTAINERS: Update Manivannan Sadhasivam email address
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
Documentation: Fix path for NVMe PCI endpoint target driver
PCI: Add CONFIG_MMU dependency
x86/PCI: Drop 'pci' suffix from intel_mid_pci.c
|
|
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
* pci/ptm-debugfs:
PCI: qcom-ep: Mask PTM_UPDATING interrupt
PCI: dwc: Add debugfs support for PTM context
PCI: dwc: Pass DWC PCIe mode to dwc_pcie_debugfs_init()
PCI: Add debugfs support for exposing PTM context
|
|
- Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM
is enabled, since there are no other entries (Hans Zhang)
* pci/controller/tegra194:
PCI: tegra194: Create debugfs directory only when CONFIG_PCIEASPM is enabled
|
|
- Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert()
deasserts in reverse order, to fix a link training regression (Jensen
Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel)
* pci/controller/rockchip:
PCI: rockchip-ep: Mark RK3399 as intx_capable
PCI: rockchip: Fix order of rockchip_pci_core_rsts
|
|
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
* pci/controller/rcar-gen4:
PCI: rcar-gen4: Document how to obtain platform firmware
PCI: rcar-gen4: set ep BAR4 fixed size
|
|
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT lacks
'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32,
and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
* pci/controller/qcom:
PCI: qcom: Add support for IPQ5018
dt-bindings: PCI: qcom: Add IPQ5018 SoC
PCI: dwc: Add support for configuring lane equalization presets
PCI: Add lane equalization register offsets
PCI: dwc: Update pci->num_lanes to maximum supported link width
PCI: of: Add of_pci_get_equalization_presets() API
|
|
- Use for_each_of_range() iterator for parsing 'ranges' (Rob Herring)
* pci/controller/mvebu:
PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"
|
|
- Use to_delayed_work() instead of open-coding it (Chen Ni)
* pci/controller/mobiveil:
PCI: ls-gen4: Use to_delayed_work()
|
|
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard
Zhu)
- Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link();
since the DWC core does this, imx6 only needs it when retraining for a
faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some
cases, the controller can't exit 'L23 Ready' through Beacon or PERST#
deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s,
causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Save and restore the LUT setting during suspend/resume for i.MX95 SoC
PCI: imx6: Add PLL lock check for i.MX95 SoC
PCI: imx6: Add workaround for errata ERR051586
PCI: imx6: Add workaround for errata ERR051624
PCI: imx6: Toggle the core reset for i.MX95 PCIe
PCI: imx6: Call dw_pcie_wait_for_link() from start_link() callback only when required
PCI: imx6: Skip link up workaround for newer platforms
|
|
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more
robust; this will not affect the intended link width if all lanes are
functional (Wenbin Yao)
* pci/controller/dwc:
PCI: dwc: Make link training more robust by setting PORT_LOGIC_LINK_WIDTH to one lane
|
|
- Use FIELD_GET() to simplify extracting register values (Hans Zhang)
* pci/controller/dwc-ep:
PCI: dwc: ep: Fix errno typo
PCI: dwc: ep: Use FIELD_GET() where applicable
|
|
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the link
is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root
Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of
rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets
non-sticky registers (Shawn Lin)
- Remove unused PCIE_CLIENT_GENERAL_DEBUG definition (Hans Zhang)
- Organize register and bitfield definitions logically (Hans Zhang)
- Use rockchip_pcie_link_up() to check link up instead of open coding, and
use GENMASK() and FIELD_GET() when possible (Hans Zhang)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up() and
armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin,
meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti
(Hans Zhang)
- Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and
layerscape-gen4, mobiveil (Hans Zhang)
- Simplify j721e link-up check (Hans Zhang)
- Convert pci-host-common to a library so platforms that don't need native
host controller drivers don't need to include these helper functions
(Manivannan Sadhasivam)
* pci/controller/dw-rockchip:
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI: cadence: Simplify J721e link status check
PCI: mobiveil: Return bool from link up check
PCI: dwc: Return bool from link up check
PCI: dw-rockchip: Fix PHY function call sequence in rockchip_pcie_phy_deinit()
PCI: dw-rockchip: Use rockchip_pcie_link_up() to check link up instead of open coding
PCI: dw-rockchip: Reorganize register and bitfield definitions
PCI: dw-rockchip: Remove unused PCIE_CLIENT_GENERAL_DEBUG definition
PCI: dw-rockchip: Move rockchip_pcie_ep_hide_broken_ats_cap_rk3588() to dw_pcie_ep_ops::init()
PCI: dw-rockchip: Enable ASPM L0s capability for both RC and EP modes
PCI: dw-rockchip: Remove PCIE_L0S_ENTRY check from rockchip_pcie_link_up()
# Conflicts:
# drivers/pci/controller/pcie-apple.c
# include/linux/pci-ecam.h
|
|
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans
Zhang)
- Use shared PCIE_MSG_CODE_* definitions and remove duplicate
cdns_pcie_msg_code definitions (Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures in
some configs (Arnd Bergmann)
* pci/controller/cadence:
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
PCI: cadence: Remove duplicate message code definitions
PCI: cadence: Fix runtime atomic count underflow
|
|
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying
capabilities (Marc Zyngier)
- Directly set/clear INTx mask bits because T602x dropped the accessors
that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate T602x,
which moves them around; retain default offsets for existing DTs that
lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe because
we're allowed to sleep there (Hector Martin)
- Move register offsets into SoC-specific structure (Hector Martin)
- Add T602x PCIe support (Hector Martin)
* pci/controller/apple:
PCI: apple: Add T602x PCIe support
PCI: apple: Abstract register offsets via a SoC-specific structure
PCI: apple: Use gpiod_set_value_cansleep in probe flow
PCI: apple: Drop poll for CORE_RC_PHYIF_STAT_REFCLK
PCI: apple: Move port PHY registers to their own reg items
PCI: apple: Fix missing OF node reference in apple_pcie_setup_port
PCI: apple: Move away from INTMSK{SET,CLR} for INTx and private interrupts
PCI: apple: Dynamically allocate RID-to_SID bitmap
PCI: apple: Move over to standalone probing
PCI: ecam: Allow cfg->priv to be pre-populated from the root port device
PCI: host-generic: Extract an ECAM bridge creation helper from pci_host_common_probe()
dt-bindings: pci: apple,pcie: Add t6020 compatible string
PCI: apple: Set only available ports up
|
|
- For fixed-size BARs, retain both the actual size and the possibly larger
size allocated to accommodate iATU alignment requirements (Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space than
needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint
controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
PCI: dwc: ep: Correct PBA offset in .set_msix() callback
PCI: endpoint: pci-epf-vntb: Simplify ctrl/SPAD space allocation
PCI: endpoint: Retain fixed-size BAR size as well as aligned size
|
|
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS but
don't allow peer-to-peer transactions between Root Ports; the quirk
allows each Root Port to be in a separate IOMMU group (Huacai Chen)
* pci/virtualization:
PCI: Add ACS quirk for Loongson PCIe
|
|
- Fix locking issue in the slot reset path (Ilpo Järvinen)
* pci/reset:
PCI: Fix lock symmetry in pci_slot_unlock()
|
|
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the
filename paths. Retain old deprecated symbols for compatibility, except
for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian Norris)
* pci/pwrctrl:
arm64: Kconfig: switch to HAVE_PWRCTRL
wifi: ath12k: switch to PCI_PWRCTRL_PWRSEQ
wifi: ath11k: switch to PCI_PWRCTRL_PWRSEQ
PCI/pwrctrl: Rename pwrctrl Kconfig symbols and slot module
PCI/pwrctrl: Cancel outstanding rescan work when unregistering
|
|
- Add pm_runtime_put() cleanup helper for use with __free() to
automatically drop the device usage count when a pointer goes out of
scope (Alex Williamson)
- Increment PM usage counter when probing reset methods so we don't try to
read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
* pci/pm:
PCI: Explicitly put devices into D0 when initializing
PCI: Increment PM usage counter when probing reset methods
PM: runtime: Define pm_runtime_put cleanup helper
|
|
- Fix pci_acpi_scan_root() memory leak when we fail to create a PCI bus
(Zhe Qiao)
* pci/pci-acpi:
PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()
|
|
- Use of_fwnode_handle() so of_node_to_fwnode() can be removed (Jiri Slaby)
* pci/irq:
irqdomain: pci: Switch to of_fwnode_handle()
|
|
- Ignore Presence Detect Changed caused by DPC. pciehp already ignores
Link Down/Up events caused by DPC, but on slots using in-band presence
detect, DPC causes a spurious Presence Detect Changed event (Lukas
Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports
using in-band presence detect, the reset causes a Presence Detect Changed
event, which mistakenly caused teardown and re-enumeration of the device.
Drivers may need to annotate code that resets their device (Lukas Wunner)
* pci/hotplug:
PCI: hotplug: Drop superfluous #include directives
PCI: pciehp: Ignore Link Down/Up caused by Secondary Bus Reset
PCI: pciehp: Ignore Presence Detect Changed caused by DPC
# Conflicts:
# drivers/pci/pci.h
|
|
- Remove pci_fixup_cardbus(), which has no users left (Heiner Kallweit)
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and has
been fixed by other commits (Lukas Wunner)
- Restrict visibility of pci_dev.match_driver since it's no longer used
outside the PCI core (Lukas Wunner)
* pci/enumeration:
PCI: Limit visibility of match_driver flag to PCI core
Revert "iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices"
PCI: Print the actual delay time in pci_bridge_wait_for_secondary_bus()
PCI: Use PCI_STD_NUM_BARS instead of 6
PCI: Remove pci_fixup_cardbus()
# Conflicts:
# drivers/pci/pci.h
|
|
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and
unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and
related flags since all uses have been removed (Philipp Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid', i.e.,
their behavior no longer depends on whether pcim_enable_device or
pci_enable_device() was used, and remove related code (Philipp Stanner)
* pci/devres:
PCI: Remove function pcim_intx() prototype from pci.h
PCI: Remove hybrid-devres usage warnings from kernel-doc
PCI: Remove redundant set of request functions
PCI: Remove exclusive requests flags from _pcim_request_region()
PCI: Remove pcim_request_region_exclusive()
Documentation/driver-api: Update pcim_enable_device()
PCI: Remove hybrid devres nature from request functions
PCI: Remove pcim_iounmap_regions()
mtip32xx: Remove unnecessary pcim_iounmap_regions() calls
|
|
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag
(Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may have
changed (Ilpo Järvinen)
* pci/bwctrl:
PCI: Update Link Speed after retraining
PCI/bwctrl: Replace lbms_count with PCI_LINK_LBMS_SEEN flag
|
|
When CONFIG_SHMEM is not set, the following compiler error occurs:
ld: vmlinux.o: in function `ttm_backup_backup_page':
(.text+0x10363bc): undefined reference to `shmem_writeout'
make[3]: *** [/work/build/trace/nobackup/linux.git/scripts/Makefile.vmlinux:91: vmlinux.unstripped] Error 1
This is due to the replacement of writepage and calling swap_writeout()
and shmem_writeout() directly. The issue is that when CONFIG_SHMEM is
not defined, shmem_writeout() is also not defined.
The function ttm_backup_backup_page() called mapping->a_ops->writepage()
which was then changed to call shmem_writeout() directly.
Even before commit 84798514db50 ("mm: Remove swap_writepage() and
shmem_writepage()"), it didn't make sense to call anything other than
shmem_writeout() as the ttm_backup deals only with shmem folios.
Have DRM_TTM config option select SHMEM to guarantee that
shmem_writeout() is available.
Link: https://lore.kernel.org/all/20250602170500.48713a2b@gandalf.local.home/
Suggested-by: Hugh Dickins <hughd@google.com>
Fixes: 84798514db50 ("mm: Remove swap_writepage() and shmem_writepage()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When configuring the HDMI PLL, calculations use DIV_ROUND_UP_ULL and
DIV_ROUND_DOWN_ULL macros, which internally rely on do_div. However, do_div
expects a 32-bit (u32) divisor, and at higher data rates, the divisor can
exceed this limit. This leads to incorrect division results and
ultimately misconfigured PLL values.
This fix replaces do_div calls with div64_base64 calls where diviser
can exceed u32 limit.
Fixes: 5947642004bf ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250528064557.4172149-1-dibin.moolakadan.subrahmanian@intel.com
(cherry picked from commit ce924116e43ffbfa544d82976c4b9d11bcde9334)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
gve_alloc_pending_packet() can return NULL, but gve_tx_add_skb_dqo()
did not check for this case before dereferencing the returned pointer.
Add a missing NULL check to prevent a potential NULL pointer
dereference when allocation fails.
This improves robustness in low-memory scenarios.
Fixes: a57e5de476be ("gve: DQO: Add TX path")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Zenghui reports that since 1396e89e09f0 ("genirq/msi: Move prepare() call
to per-device allocation"), his Multi-MSI capable device isn't working
anymore.
This is a consequence of 15c72f824b32 ("PCI/MSI: Add support for per device
MSI[X] domains"), which always creates a MSI domain of size 1, even in the
presence of Multi-MSI.
While this was somehow working until then, moving the .prepare() call ends
up sizing the ITS table with a tiny value for this device, and making the
endpoint driver unhappy.
Instead, always create the domain and call the .prepare() helper with the
maximum expected size.
Fixes: 1396e89e09f0 ("genirq/msi: Move prepare() call to per-device allocation")
Fixes: 15c72f824b32 ("PCI/MSI: Add support for per device MSI[X] domains")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/all/20250603141801.915305-1-maz@kernel.org
Closes: https://lore.kernel.org/r/0b1d7aec-1eac-a9cd-502a-339e216e08a1@huawei.com
|
|
Fix various spelling errors in comments.
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When the socket is busy processing nvme_tcp_try_recv() might return
-EAGAIN, but this doesn't automatically imply that the sending side is
blocked, too. So check if there are pending requests once
nvme_tcp_try_recv() returns -EAGAIN and continue with the sending loop
to avoid I/O stalls.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Acked-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Validate the request in nvme_tcp_handle_r2t() to ensure it's not part of
any list, otherwise a malicious R2T PDU might inject a loop in request
list processing.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure
concatenation") modified nvme_tcp_setup_ctrl() to call
nvme_tcp_configure_admin_queue() twice. The first call prepares for
DH-CHAP negotitation, and the second call is required for secure
concatenation. However, this change triggered BUG KASAN slab-use-after-
free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by
repeating the blktests test case nvme/063 a few times [1].
When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain
below:
nvme_tcp_create_ctrl()
nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set
nvme_tcp_setup_ctrl() new=true
nvme_tcp_configure_admin_queue() new=true ... Succeed
nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set
nvme_stop_keep_alive()
nvme_tcp_teardown_admin_queue() remove=false
nvme_tcp_configure_admin_queue() new=false
nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set()
nvme_uninit_ctrl()
nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set
The first call of nvme_tcp_configure_admin_queue() succeeds with
new=true argument. The second call fails with new=false argument. This
second call does not call nvme_remove_admin_tag_set() on failure, due to
the new=false argument. Then the admin tag set is not removed. However,
nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call
nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which
has admin_tag_set field. Later on, the timeout handler accesses the
admin_tag_set field and causes the BUG KASAN slab-use-after-free.
To not leave the admin tag set, call nvme_remove_admin_tag_set() when
the second nvme_tcp_configure_admin_queue() call fails. Do not return
from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin"
go-to label to call nvme_tcp_teardown_admin_queue() which calls
nvme_remove_admin_tag_set().
Fixes: 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-nvme/6mhxskdlbo6fk6hotsffvwriauurqky33dfb3s44mqtr5dsxmf@gywwmnyh3twm/ [1]
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvme already supports registered buffers for non-vectored io_uring
passthrough commands, enable it for the vectored mode as well. It takes
an iovec, each entry of which should contain a range within the same
registered buffer specificied in sqe->buf_index.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvme_map_user_request() takes flags as the last argument, but
nvme_uring_cmd_io() shoves a bool "vec" into it. It behaves as
expected because bool is converted to 0/1 and NVME_IOCTL_VEC is
defined as 1, but it's better to pass flags explicitly.
Fixes: 7b7fdb8e2dbc1 ("nvme: replace the "bool vec" arguments with flags in the ioctl path")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The command specific status code, 0x183, was introduced in the NVMe 2.0
specification defined to "Command Size Limits Exceeded" and only ever
applied to DSM and Copy commands. Fix the name and, remove the
incorrect translation to error codes and special treatment in the
target code for it.
Fixes: 3b7c33b28a44d4 ("nvme.h: add Write Zeroes definitions")
Cc: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- better error handling when reloading a table
- use use generic disable_* functions instead of open coding them
- lock queue limits when reading them
- remove unneeded kvfree from alloc_targets
- fix BLK_FEAT_ATOMIC_WRITES
- pass through operations on wrapped inline crypto keys
- dm-verity:
- use softirq context only when !need_resched()
- fix a memory leak if some arguments are specified multiple times
- dm-mpath:
- interface for explicit probing of active paths
- replace spin_lock_irqsave with spin_lock_irq
- dm-delay: don't busy-wait in kthread
- dm-bufio: remove maximum age based eviction
- dm-flakey: various fixes
- vdo indexer: don't read request structure after enqueuing
- dm-zone: Use bdev_*() helper functions where applicable
- dm-mirror: fix a tiny race condition
- dm-stripe: small code cleanup
* tag 'for-6.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm-stripe: small code cleanup
dm-verity: fix a memory leak if some arguments are specified multiple times
dm-mirror: fix a tiny race condition
dm-table: check BLK_FEAT_ATOMIC_WRITES inside limits_lock
dm mpath: replace spin_lock_irqsave with spin_lock_irq
dm-mpath: Don't grab work_mutex while probing paths
dm-zone: Use bdev_*() helper functions where applicable
dm vdo indexer: don't read request structure after enqueuing
dm: pass through operations on wrapped inline crypto keys
blk-crypto: export wrapped key functions
dm-table: Set BLK_FEAT_ATOMIC_WRITES for target queue limits
dm mpath: Interface for explicit probing of active paths
dm: Allow .prepare_ioctl to handle ioctls directly
dm-flakey: make corrupting read bios work
dm-flakey: remove useless ERROR_READS check in flakey_end_io
dm-flakey: error all IOs when num_features is absent
dm-flakey: Clean up parsing messages
dm: remove unneeded kvfree from alloc_targets
dm-bufio: remove maximum age based eviction
dm-verity: use softirq context only when !need_resched()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Remove always true condition in cxl features code
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates:
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL
subsystem, including documentation on CXL related platform and
firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub",
"Performance Maitenance" and "Memory Sparing". The series
connects CXL to EDAC.
* tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (53 commits)
cxl/edac: Add CXL memory device soft PPR control feature
cxl/edac: Add CXL memory device memory sparing control feature
cxl/edac: Support for finding memory operation attributes from the current boot
cxl/edac: Add support for PERFORM_MAINTENANCE command
cxl/edac: Add CXL memory device ECS control feature
cxl/edac: Add CXL memory device patrol scrub control feature
cxl: Update prototype of function get_support_feature_info()
EDAC: Update documentation for the CXL memory patrol scrub control feature
cxl/features: Remove the inline specifier from to_cxlfs()
cxl/feature: Remove redundant code of get supported features
docs: ABI: Fix "firwmare" to "firmware"
cxl/Documentation: Fix typo in sysfs write_bandwidth attribute path
cxl: doc/linux/access-coordinates Update access coordinates calculation methods
cxl: docs/platform/acpi/srat Add generic target documentation
cxl: docs/platform/cdat reference documentation
Documentation: Update the CXL Maturity Map
cxl: Sync up the driver-api/cxl documentation
cxl: docs - add self-referencing cross-links
cxl: docs/allocation/hugepages
cxl: docs/allocation/reclaim
...
|
|
Commit 0cbef962ce1f ("PM: sleep: Resume children after resuming the
parent") introduced a subtle concurrency issue that may lead to a kernel
crash if system suspend is aborted and may also slow down asynchronous
device resume otherwise.
Namely, the initial list walks in dpm_noirq_resume_devices(),
dpm_resume_early(), and dpm_resume() call dpm_clear_async_state() for
every device and attempt to asynchronously resume it if it has no
children (so it is a "root" device). The asynchronous resume of a
root device triggers an attempt to asynchronously resume its children
which may take place before calling dpm_clear_async_state() for them
due to the lack of synchronization between dpm_async_resume_children()
and the code calling dpm_clear_async_state(). If this happens, the
dpm_clear_async_state() that comes in late, will clear
power.work_in_progress for the given device after it has been set by
__dpm_async(), so the suspend callback will be allowed to run once
again for the same device during the same transition. This leads to
a whole range of interesting breakage.
Fortunately, if the suspend transition is not aborted, power.work_in_progress
is set by it for all devices, so dpm_async_resume_children() will not
schedule asynchronous resume for them until dpm_clear_async_state()
clears that flag, but this means missing an opportunity to start the
resume of those devices earlier.
Address the above issue by adding dpm_list_mtx locking to
dpm_async_resume_children(), so it will wait for the entire initial
list walk and the invocation of dpm_clear_async_state() for all devices
to be completed before scheduling any new asynchronous resume callbacks.
Fixes: 0cbef962ce1f ("PM: sleep: Resume children after resuming the parent")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/13779172.uLZWGnKmhe@rjwysocki.net
|
|
Commit 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete
set on errors") caused power.is_suspended to be set for devices with
power.direct_complete set, but it forgot to ensure the clearing of that
flag for them in device_resume(), so power.is_suspended is still set for
them during the next system suspend-resume cycle.
If that cycle is aborted in dpm_suspend(), the subsequent invocation of
dpm_resume() will trigger a device_resume() call for every device and
because power.is_suspended is set for the devices in question, they will
not be skipped by device_resume() as expected which causes scary error
messages to be logged (as appropriate).
To address this issue, move the clearing of power.is_suspended in
device_resume() immediately after the power.is_suspended check so it
will be always cleared for all devices processed by that function.
Fixes: 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete set on errors")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4990586.GXAFRqVoOG@rjwysocki.net
|
|
Commits aa7a9275ab81 ("PM: sleep: Suspend async parents after suspending
children") and 443046d1ad66 ("PM: sleep: Make suspend of devices more
asynchronous") added list splicing to the error paths of dpm_suspend(),
dpm_suspend_late(), and dpm_noirq_suspend_devices(), but they should
have used the list_splice_init() variant because the emptied list is
used going forward in all of these cases.
Replace list_splice() with list_splice_init() in the code in question as
appropriate.
Fixes: aa7a9275ab81 ("PM: sleep: Suspend async parents after suspending children")
Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4659282.LvFx2qVVIh@rjwysocki.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Framebuffer Subsystem (fbdev):
- The display's blanking status is now tracked in 'struct fb_info'
- 'framebuffer_alloc()' initializes the blank state to FB_BLANK_UNBLANK
- 'register_framebuffer()' sets the state to 'FB_BLANK_POWERDOWN' if
an 'fb_blank' callback exists, ensuring 'FB_EVENT_BLANK' listeners
correctly see the display being turned on during the first modeset
- The 'FB_EVENT_BLANK' event data now includes both the new and the
old blank states
- 'fb_blank()' has been reworked to return early on errors, without
functional changes, in preparation for further state tracking
improvements
- Fbdev now calls dedicated functions in the backlight subsystems to
notify them of blank state changes, instead of relying on fbdev
event notifiers
- For LCDs, fbdev also calls a dedicated function to notify of mode
changes
- Removed the definitions for the unused fbdev event constants
'FB_EVENT_MODE_CHANGE' and 'FB_EVENT_BLANK' from the header file
Backlight Subsystem:
- Implemented fbdev blank state tracking using the (newly enhanced)
blank state information provided directly by 'FB_EVENT_BLANK'
- Removed internal blank state tracking fields ('fb_bl_on') from
'struct backlight_device'
- Moved the handling of blank-state updates into a separate internal
helper function, 'backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call interface ('backlight_notify_blank()' and
'backlight_notify_blank_all()') for display drivers to update
backlight status
LCD Subsystem:
- Moved the handling of display updates (blank events and mode
changes) from fbdev event notifiers to separate internal helper
functions ('lcd_notify_blank',
'lcd_notify_mode_change')
- Removed support for fbdev events and replaced it with dedicated
function call interfaces ('lcd_notify_blank_all()',
'lcd_notify_mode_change_all()')
- The LCD subsystem now maintains its own internal list of LCD
devices instead of relying on fbdev notifiers
LED Backlight Trigger:
- Moved the handling of blank-state updates into a separate internal
helper, 'ledtrig_backlight_notify_blank()'
- Removed support for fbdev events and replaced it with a dedicated
function call, 'ledtrig_backlight_blank()', for fbdev to notify
trigger of blank state changes
- The LED backlight trigger now maintains its own internal list of
triggers instead of relying on fbdev notifiers
Qualcomm WLED Backlight:
- Added a NULL check after 'devm_kasprintf()' in 'wled_configure()'
to prevent a potential NULL pointer dereference if memory
allocation fails"
* tag 'backlight-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: pm8941: Add NULL check in wled_configure()
fbdev: Remove constants of unused events
leds: backlight trigger: Replace fb events with a dedicated function call
leds: backlight trigger: Move blank-state handling into helper
backlight: lcd: Replace fb events with a dedicated function call
backlight: lcd: Move event handling into helpers
backlight: Replace fb events with a dedicated function call
backlight: Move blank-state handling into helper
backlight: Implement fbdev tracking with blank state from event
fbdev: Send old blank state in FB_EVENT_BLANK
fbdev: Track display blanking state
fbdev: Rework fb_blank()
|
|
[Why]
DC and AC levels are advertised in a percentage, not a luminance.
[How]
Scale DC and AC levels to supported values.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4221
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Default BIOS brightness caps are buried in ACPI.
[How]
Add extra dynamic debug that can show default brightness caps.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
It sent an error msg when it failed to read the DP tunneling DPCD field.
This should just be a warning msg. Use a DC log instead of a DM error msg.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We've made fix for garbage in dcn31_reset_back_end_for_pipe(), adding
blank_stream() before disable_crtc(). And set_dpms_off() will call
blank_stream() again.
[How]
Add flag to avoid calling blank_stream() twice.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Only OLED panels require non-zero pre_T11_delay defaultly.
Others should be controlled by power sequence.
[How]
For non OLED, pre_T11_delay delay in code should be zero.
Also post_T7_delay.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
