summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-03-26ixgbe: cleanup maximum number of tx queuesJohn Fastabend
In the last patch I missed an unecessary min_t comparison. This patch removes it, the path allocates at most 72 tx queues for 82599 and 24 for 82598 there is no need for this check. Additionally this sets MAX_[TX|RX]_QUEUES to 72. Which is used as the size for the tx/rx_ring arrays. There is no reason to have more tx_rings/rx_rings then num_tx_queues. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26ixgbe: Change where clear_to_send_flag is reset to zero.Greg Rose
The clear_to_send flag is being cleared before the call to ping all the VFs. It should be called after pinging all the VFs. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26ixgbe: In SR-IOV mode insert delay before bring the adapter upGreg Rose
VFs running in guest VMs do not respond in as timely a manner to PF indication it is going down as they do when running in the host domain. If the adapter is in SR-IOV mode insert a two second delay to guarantee that all VFs have had time to respond to the PF reset. In any case resetting the PF while VFs are active should be discouraged but if it must be done then there will be a two second delay to help synchronize resets among the PF and all the VFs. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26ixgbevf: Fix signed/unsigned int errorGreg Rose
In the Tx mapping function if a DMA error occurred then the unwind of previously mapped sections would improperly check an unsigned int if it was less than zero. Changed the index variable to signed to avoid the error. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26netxen: update version to 4.0.73Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26netxen: added sanity check for pci mapAmit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Return value of ioremap is not checked, NULL check added. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26netxen: fix warning in ioaddr for NX3031 chipAmit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> crb_intr_mask/crb_sts_consumer is predefined for NX2031 not for NX3031. For NX3031, these values get defined in rx context creation. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26netxen: fix bios version calculationAmit Kumar Salecha
Bios sub version from unified fw image is calculated incorrect. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26Revert "r8169: enable 64-bit DMA by default for PCI Express devices (v2)"David S. Miller
This reverts commit 353176888386d9025062a12dcec08d49af10cf2c. People are reporting problems due to this change and there is no anticipation that the cause will be tracked down any time soon. We can try next time to selectively re-enable this based upon chip type, or have a black list of some sort. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-26USB gadget r8a66597-udc.c: duplicated includeAndrea Gelmini
drivers/usb/gadget/r8a66597-udc.c: linux/err.h is included more than once. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) TIPC: Removed inactive maintainer isdn: Cleanup Sections in PCMCIA driver elsa isdn: Cleanup Sections in PCMCIA driver avma1 isdn: Cleanup Sections in PCMCIA driver teles isdn: Cleanup Sections in PCMCIA driver sedlbauer via-velocity: Fix FLOW_CNTL_TX_RX handling in set_mii_flow_control() netfilter: xt_hashlimit: IPV6 bugfix netfilter: ip6table_raw: fix table priority netfilter: xt_hashlimit: dl_seq_stop() fix af_key: return error if pfkey_xfrm_policy2msg_prep() fails skbuff: remove unused dma_head & dma_maps fields vlan: updates vlan real_num_tx_queues vlan: adds vlan_dev_select_queue igb: only use vlan_gro_receive if vlans are registered igb: do not modify tx_queue_len on link speed change igb: count Rx FIFO errors correctly bnx2: Use proper handler during netpoll. bnx2: Fix netpoll crash. ksz884x: fix return value of netdev_set_eeprom cgroups: net_cls as module ...
2010-03-25drm/i915: Rename many remaining uses of "output" to encoder or connector.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-25drm/i915: Rename intel_output to intel_encoder.Eric Anholt
The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-25isdn: Cleanup Sections in PCMCIA driver elsaHenne
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x55e37): Section mismatch in reference from the function elsa_cs_config() to the function .devinit.text:hisax_init_pcmcia() The function elsa_cs_config() references the function __devinit hisax_init_pcmcia(). This is often because elsa_cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25isdn: Cleanup Sections in PCMCIA driver avma1Henne
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x56512): Section mismatch in reference from the function avma1cs_config() to the function .devinit.text:hisax_init_pcmcia() The function avma1cs_config() references the function __devinit hisax_init_pcmcia(). This is often because avma1cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25isdn: Cleanup Sections in PCMCIA driver telesHenne
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x56bfb): Section mismatch in reference from the function teles_cs_config() to the function .devinit.text:hisax_init_pcmcia() The function teles_cs_config() references the function __devinit hisax_init_pcmcia(). This is often because teles_cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25isdn: Cleanup Sections in PCMCIA driver sedlbauerHenne
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x558d6): Section mismatch in reference from the function sedlbauer_config() to the function .devinit.text:hisax_init_pcmcia() The function sedlbauer_config() references the function __devinit hisax_init_pcmcia(). This is often because sedlbauer_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25via-velocity: Fix FLOW_CNTL_TX_RX handling in set_mii_flow_control()David S. Miller
Clear, don't set, ANAR_ASMDIR in this case. Noticed by Roel Kluin. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25agp/intel: intel_845_driver is an agp driver!Daniel Vetter
... not a GTT driver. So the additional chipset flush introduced in commit 2162e6a2b0cd5acbb9bd8a3c94e1c1269b078295 Author: Dave Airlie <airlied@redhat.com> Date: Wed Nov 21 16:36:31 2007 +1000 agp/intel: Add chipset flushing support for i8xx chipsets. to fix a GTT problem makes absolutely no sense. If this would really be needed for AGP chipsets, too, we should add it to all i8xx agp drivers, not just one. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-25drm/i915: introduce to_intel_bo helperDaniel Vetter
This is a purely cosmetic change to make changes in this area easier. And hey, it's not only clearer and typechecked, but actually shorter, too! [anholt: To clarify, this is a change to let us later make drm_i915_gem_object subclass drm_gem_object, instead of having drm_gem_object have a pointer to i915's private data] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-25drm/i915: Disable FBC on 915GM and 945GM.Robert Hooker
It is causing hangs after a suspend/resume cycle with the default powersave=1 module option on these chipsets since 2.6.32-rc. BugLink: http://bugs.launchpad.net/bugs/492392 Signed-off-by: Robert Hooker <sarvatt@ubuntu.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-25PCI: don't say we claimed a resource if we failedBjorn Helgaas
pci_claim_resource() can fail, so pay attention and only claim success when it actually succeeded. If pci_claim_resource() fails, it prints a useful diagnostic. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-25PCI quirk: Disable MSI on VIA K8T890 systemsMatthew Wilcox
Bugzilla 15287 indicates that there's a problem with Message Signalled Interrupts on VIA K8T890 systems. Add a quirk to disable MSI on these systems. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Jan Kreuzer <kontrollator@gmx.de> Tested-by: lh <jarryson@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: DSS2: panel-generic: re-implement mode changing OMAP: DSS2: initialize dss clk sources properly OMAP: DSS2: VRAM: Fix early_param for vram
2010-03-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Orion5x: replace KEY_WLAN with KEY_WPS_BUTTON [ARM] Kirkwood: WPS button keycode mapping pxa168fb: fix incorrect resource calculation [ARM] pxa/raumfeld: fix button name [ARM] pxa/raumfeld: remove duplicated #include [ARM] locomo: fix unpaired spin_lock_irqsave [ARM] locomo: fix SPI register offset [ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pm [ARM] pxa: remove unnecessary 'select FB_W100' from some platforms [ARM] pxa: remove spi cs gpio direction to avoid clash with driver [ARM] mmp: fix for variables in uncompress.h being discarded [ARM] pxa: fix for variables in uncompress.h being discarded ARM: Update mach-types ARM: Fix IXP23xx build error in mach/memory.h
2010-03-24Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-sff: fix spurious IRQ handling pata_via: Add VIA VX900 support
2010-03-24Merge branch 'sh/for-2.6.34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Silence unintialized variable warnings in dwarf unwinder. sh: Tidy up a couple of section mismatches. sh: Fix build after dynamic PMB rework sh: Replace unsafe manipulation of MMUCR sh: Flush ITLB too in PTEAEX's flush_tlb_page() sh64: Remove long unused mid_sched macro SH: remove superfluous warning from the serial driver SH: fix SCIFA SCASCR register bit definitions serial: sh-sci: fix SH-Mobile SH breakage sh: Add watch-dog register address for SH7722/SH7723/SH7724 sh: ms7724: Add tiny-document for sound sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_init
2010-03-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: fix dangling pointers lp3971: Fix BUCK_VOL_CHANGE_SHIFT logic lp3971: Fix setting val for LDO2 and LDO4 regulator: Get rid of lockdep warning regulator: handle kcalloc() failure Regulators: max8925-regulator - clean up driver data after removal
2010-03-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Stop trying to use ACPI lid status to determine LVDS connection. drm/intel: fix up set_tiling for untiled->tiled transition drm/i915: Set up the documented clock gating on Sandybridge and Ironlake. agp/intel: Don't do the chipset flush on Sandybridge. agp/intel: Respect the GTT size on Sandybridge for scratch page setup. drm/i915: fix small leak on overlay error path drm/i915: Avoid NULL deref in get_pages() unwind after error. drm/i915: Fix check with IS_GEN6 drivers/gpu/drm/i915/intel_bios.c: fix continuation line formats drm/i915: Enable VS timer dispatch. drm/i915: Rename FBC_C3_IDLE to FBC_CTL_C3_IDLE to match other registers drm/i915: remove an unnecessary wait_request() drm/i915: Don't bother with the BKL for GEM ioctls.
2010-03-24Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-scmi: Provide module aliases for automatic loading i2c-scmi: Support IBM SMBus CMI devices acpi: Support IBM SMBus CMI devices
2010-03-24Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix boot failures with compressed kernels [S390] fix broken proc interface for sclp_async [S390] sclp: avoid 64 bit division [S390] dasd: check tsb validity [S390] dasd: fix alignment of transport mode recovery TCW [S390] system.h: Fix compile error for 1 and 2 byte cmpxchg [S390] smp: fix lowcore allocation [S390] zcore: CPU registers are not saved under LPAR
2010-03-24lxfb: set the H- and V-SYNC polarity of the flatpanel outputMichael Grzeschik
Fixup for the flatpanel output. The geode_modedb attribute flags are used to set the SYNC polarity of the flatpanel. Without this patch our flatpanel registers stayed unconfigured, so we just saw garbage output. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24mmc: fix incorrect interpretation of card type bitsAdrian Hunter
In the extended CSD register the CARD_TYPE is an 8-bit value of which the upper 6 bits were reserved in JEDEC specifications prior to version 4.4. In version 4.4 two of the reserved bits were designated for identifying support for the newly added High-Speed Dual Data Rate. Unfortunately the mmc_read_ext_csd() function required that the reserved bits be zero instead of ignoring them as it should. This patch makes mmc_read_ext_csd() ignore the CARD_TYPE bits that are reserved or not yet supported. It also stops the function jumping to the end as though an error occurred, when it is only warns that the CARD_TYPE bits (that it does interpret) are invalid. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24c2port: fix device_create() return value checkJani Nikula
Use IS_ERR() instead of comparing to NULL. [akpm@linux-foundation.org: preserve the error code] Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24drivers/gpio/max730x.c: add license macroRichard Röjfors
According to the header in max730x it is licensed GPLv2. Add a MODULE_LICENSE to avoid getting the kernel tainted. [w.sang@pengutronix.de: add MODULE_AUTHOR and MODULE_DESCRIPTION also] Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24rtc/mc13783: fix use after free bugUwe Kleine-König
This was introduced by v2.6.34-rc1~38: 4c014e8 (rtc/mc13783: protect rtc {,un}registration by mc13783 lock) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24firewire: core: align driver match with modaliasStefan Richter
The driver match strategy was: - Match vendor/model/specifier/version of the unit directory. - If that was a miss, match vendor from the root directory and model/specifier/version of the unit directory. This was inconsistent with how the modalias string was constructed until recently (take vendor/model from root directory and specifier/ version from unit directory). It was also inconsistent with how it is done since the parent commit: - Use vendor/model/specifier/version of the unit directory if possible, - fall back to one or more of vendor/model/specifier/version from the root directory depending on which ones are not present at the unit directory. Fix this inconsistency by sharing the ROM scanner function between modalias printer function and driver match function. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-24firewire: core: fix Model_ID in modaliasStefan Richter
The modalias string of devices that represent units on a FireWire node did not show Module_ID entries within unit directories. This was because firewire-core searched only the root directory of the configuration ROM for a Model_ID entry. We now search first the root directory, then the unit directory. IOW honor a unit directory's Model_ID if present, otherwise fall back to the root directory's model ID (if present). Furthermore, apply the same change to Vendor_ID. This had the same issue but it was less apparent because most devices provide Vendor_ID only in the root directory. And finally, also use this strategy for the remaining two IDs in the modalias, Specifier_ID and Version. It does not actually make sense to look for them elsewhere than in the unit directory because they are mandatory there. However, a uniform search order simplifies the implementation and has no adverse affect in practice. Side notes: - The older counterpart of this, nodemgr.c of ieee1394, looked for Vendor_ID first in the root directory, then in the unit directory, and for Model_ID only in the unit directory. - There is a single mainline driver which requires Vendor_ID and Model_ID --- the firedtv driver. This one worked because FireDTVs provide Vendor_ID in the root directory and Model_ID identically in root directory and unit directory. - Apart from firedtv, there are currently no drivers known to me (including userspace drivers) that look at the Vendor_ID or Model_ID of the modalias. Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-24PCI quirk: RS780/RS880: work around missing MSI initializationClemens Ladisch
AMD says in section 2.5.4 (GFX MSI Enable) of #43291 (AMD 780G Family Register Programming Requirements): The SBIOS must enable internal graphics MSI capability in GCCFG by setting the following: NBCFG.NB_CNTL.STRAP_MSI_ENABLE='1' Quite a few BIOS writers misinterpret this sentence and think that enabling MSI is an optional feature. However, clearing that bit just prevents delivery of MSI messages but does not remove the MSI PCI capabilities registers, and so leaves these devices unusable for any driver that attempts to use MSI. Setting that bit is not possible after the BIOS has locked down the configuration registers, so we have to manually disable MSI for the affected devices. This fixes the codec communication errors in the HDA driver when accessing the HDMI audio device, and allows us to get rid of the overcautious quirk in radeon_irq_kms.c. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Alex Deucher <alexdeucher@gamil.com> Cc: <stable@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI quirk: only apply CX700 PCI bus parking quirk if external VT6212L is presentTim Yamin
Apply the CX700 quirk only when an external VT6212L is present (which is the case for the errant hardware the quirk was written for), don't touch the settings otherwise -- Hauppage PVR-500 tuners need PCI Bus Parking in order to work and when that's turned on everything seems to behave fine. I guess the underlying problem is a combination of an external VT6212L and the CX700 rather than the CX700's PCI being broken completely for all cases... Reported-by: Jeroen Roos <jeroen@roosnl.com> Signed-off-by: Tim Yamin <plasm@roo.me.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: complain about devices that seem to be brokenBjorn Helgaas
If we can tell that a device isn't working correctly, we should tell the user to make debugging easier. Otherwise, it can take a lot of work to determine whether the problem is in the driver, PCMCIA, PCI, hardware, etc., as in http://bugzilla.kernel.org/show_bug.cgi?id=12006 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: print resources consistently with %pRBjorn Helgaas
No functional change; just print resources in the conventional style. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: make disabled window printk style match the enabled onesBjorn Helgaas
No functional change; this just tweaks the changes from 349e1823a405 so the new printks for disabled PCI-to-PCI bridge windows match the ones for the enabled windows. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: break out primary/secondary/subordinate for readabilityBjorn Helgaas
No functional change; just add names for the primary/secondary/subordinate bus numbers read from config space rather than repeatedly masking/shifting. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI: for address space collisions, show conflicting resourceBjorn Helgaas
With request_resource_conflict(), we can learn what the actual conflict is, so print that info for debugging purposes. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24i2c-scmi: Provide module aliases for automatic loadingDarrick J. Wong
Provide module aliases for automatic loading. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-24i2c-scmi: Support IBM SMBus CMI devicesCrane Cai
*) add a new HID for IBM SMBus CMI devices *) add methods for IBM SMBus CMI devices *) hook different HID with different control methods set *) minor tweaks as suggested by Jean Delvare Slightly modified by Darrick to use #define'd IBM SMBUS HID from Darrick's ACPI scan quirk patch. Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-24acpi: Support IBM SMBus CMI devicesDarrick J. Wong
On some old IBM workstations and desktop computers, the BIOS presents in the DSDT an SMBus object that is missing the HID identifier that the i2c-scmi driver looks for. Modify the ACPI device scan code to insert the missing HID if it finds an IBM system with such an object. Affected machines: IntelliStation Z20/Z30. Note that the i2c-i801 driver no longer works on these machines because of ACPI resource conflicts. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-24[S390] fix broken proc interface for sclp_asyncHans-Joachim Picht
This patch now allows the use of the proc interface to either activate or deactivate call home on panic. e.g. echo 1 > /proc/sys/kernel/callhome strict_strtoul() requires _either_'\n\0' _or_ '\0' termination. This was missing and therefore the interface did not recognise valid input. Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24[S390] sclp: avoid 64 bit divisionHeiko Carstens
Avoid 64 bit division to fix this compile error on 32 bit: drivers/s390/char/sclp_cmd.c:711: undefined reference to `__udivdi3' Also move the whole arch_get_memory_phys_device function to the memory hotplug related functions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-10-03 09:45:30 +0000