summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-05-04Input: cm109 - spin_lock in complete() cleanupMing Lei
Complete() will be run with interrupt enabled, so change to spin_lock_irqsave(). Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-04Input: cm109 - fix handling of volume and mute buttonsFlorian Euchner
The CM109 driver reported key press events of volume up / down and record / playback mute buttons, but no release events. Report those events properly by handling volume and mute keys seperately. For the record and playback mute buttons, only presses are registered by the CM109, therefore simulate press-n-release. This fixes the volume control buttons of various USB headsets. Signed-off-by: Florian Euchner <florian.euchner@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-29Input: byd - don't wipe dynamically allocated memory twiceVladimir Zapolskiy
Since memory for a private data is allocated by kzalloc() there is no need to fill it with zeroes immediately after the allocation. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-29Input: twl4030 - fix unsafe macro definitionRui Teng
The bitwise shift operator has lower priority than plus operator. So the values on macros should be enclosed in parentheses. For example, "(1 << 4 + 1)" means "(1 << (4 + 1))", but it is not expected by the macros. And also fix other two coding style problems reported by scripts/checkpatch.pl. Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-25Input: twl6040-vibra - remove mutexH. Nikolaus Schaller
The mutex does not seem to be needed. twl4030-vibra doesn't use one either. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-06Input: bcm_iproc_tsc - use syscon to access shared registersRaveendra Padasalagi
In Cygnus SOC touch screen controller registers are shared with ADC and flex timer. Using readl/writel could lead to race condition. So touch screen driver is enhanced to support register access using syscon framework API's to take care of mutually exclusive access. Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: ti_am335x_tsc - use SIMPLE_DEV_PM_OPSDmitry Torokhov
Instead of doing the dance with macro that either resolves to a pointer or NULL, let's switch to using SIMPLE_DEV_PM_OPS(). Also let's mark suspend and resume methods as __maybe_unused instead of guarding them with an #ifdef and rely on linker to drop unused code. Doing so should allow better compile coverage. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: omap-keypad - remove set_col_gpio_val() and get_row_gpio_val()Dmitry Torokhov
Commit f799a3d8fe170159257b75c1baf48a7c1f625d1d ("Input: omap-keypad: Remove dependencies to mach includes") removed users of the above functions, but left them in the code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: omap-keypad - drop empty PM stubsDmitry Torokhov
There is no reason to have empty suspend and resume stubs. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: omap-keypad - remove adjusting of scan delayDmitry Torokhov
As of 35f8679f577ae5673a778598bcbe7b45cbec8923 ("Input: omap-keypad - remove dead check") we no longer declare keypresses as spurious, therefore we can use constant delay between scans. Suggested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: kbtab - stop saving struct usb_deviceOliver Neukum
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: gtco - stop saving struct usb_deviceOliver Neukum
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: aiptek - stop saving struct usb_deviceOliver Neukum
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: acecad - stop saving struct usb_deviceOliver Neukum
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-23Input: sur40 - fix DMA on stackOliver Neukum
During the initialisation the driver uses a buffer on the stack for DMA. That violates the cache coherency rules. The fix is to allocate the buffer with kmalloc(). Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-23Input: ati_remote2 - fix crashes on detecting device with invalid descriptorVladis Dronov
The ati_remote2 driver expects at least two interfaces with one endpoint each. If given malicious descriptor that specify one interface or no endpoints, it will crash in the probe function. Ensure there is at least two interfaces and one endpoint for each interface before using it. The full disclosure: http://seclists.org/bugtraq/2016/Mar/90 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: synaptics - handle spurious release of trackstick buttons, againBenjamin Tissoires
Looks like the fimware 8.2 still has the extra buttons spurious release bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=114321 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: synaptics-rmi4 - remove check of Non-NULL arrayAndrew Duggan
Originally the irq_mask member of rmi_function was a pointer. Then it was switched to being a zero length array. However, the checks for a NULL pointer where not removed. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: byd - enable absolute modeRichard Pospesel
The Windows driver's settings dialog contains a visualization of the regions for the hardware edge scrolling capability, which uses a temporarily-enabled limited-resolution absolute mode. This patch enables this during normal operation, and combines the absolute packets with the existing relative packets to provide accurate absolute position and touch reporting. It also adds documentation for all known gesture packets and initialization commands. Reviewed-by: Chris Diamand <chris@diamand.org> Signed-off-by: Richard Pospesel <pospeselr@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: ims-pcu - sanity check against missing interfacesOliver Neukum
A malicious device missing interface can make the driver oops. Add sanity checking. Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-16Input: melfas_mip4 - add hw_version sysfs attributeSangwon Jee
Add hw_version sysfs attribute for retrieving hardware information from firmware. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-15Merge tag 'v4.5' into nextDmitry Torokhov
Merge with Linux 4.5 to get PROPERTY_ENTRY_INTEGER() that is needed to fix pxa/raumfeld rotary encoder properties.
2016-03-15Input: synaptics-rmi4 - using logical instead of bitwise ANDDan Carpenter
There is a typo so we have && instead of &. Fixes: ff8f83708b3e ('Input: synaptics-rmi4 - add support for 2D sensors and F11') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-14Input: powermate - fix oops with malicious USB descriptorsJosh Boyer
The powermate driver expects at least one valid USB endpoint in its probe function. If given malicious descriptors that specify 0 for the number of endpoints, it will crash. Validate the number of endpoints on the interface before using them. The full report for this issue can be found here: http://seclists.org/bugtraq/2016/Mar/85 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target bug fix from Nicholas Bellinger: "Here is an outstanding target-core bug-fix for v4.5 code." This patch addresses a recent Task Management (TMR) regression related to larger set of multi-port LUN_RESET bug-fixes in v4.5-rc5. It drops a left-over target_put_sess_cmd() of se_cmd->cmd_kref within ABORT_TASK failure path, once a se_cmd descriptor has already completed posting response to fabric driver logic, and must be skipped during normal ABORT_TASK se_cmd->tag lookup" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Drop incorrect ABORT_TASK put for completed commands
2016-03-11Input: snvs_pwrkey - fix returned value check of ↵Vladimir Zapolskiy
syscon_regmap_lookup_by_phandle() On error syscon_regmap_lookup_by_phandle() returns ERR_PTR() value, which makes a check for NULL invalid and may lead to oops on error path. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-11Merge tag 'for-linus-20160311' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Brian Norris: "Late MTD fix for v4.5: - A simple error code handling fix for the NAND ECC test; this was a regression in v4.5-rc1 - A MAINTAINERS update, which might as well go in ASAP" * tag 'for-linus-20160311' of git://git.infradead.org/linux-mtd: MAINTAINERS: add a maintainer for the NAND subsystem mtd: nand: tests: fix regression introduced in mtd_nandectest
2016-03-11Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm/i915 fixes from Dave Airlie: "Just two i915 regression fixes, that should be it from me" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Actually retry with bit-banging after GMBUS timeout drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
2016-03-11Merge tag 'media/v4.5-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "One last time fix: It adds a code that prevents some media tools like media-ctl to hide some entities that have their IDs out of the range expected by those apps" * tag 'media/v4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media-device: map new functions into old types for legacy API
2016-03-11Merge tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: "Two fixes showed up in last few days, and they should be included in 4.5. Summary: Two more late fixes to drivers, nothing major here: - A memory leak fix in fsdma unmap the dma descriptors on freeup - A fix in xdmac driver for residue calculation of dma descriptor" * tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_xdmac: fix residue computation dmaengine: fsldma: fix memory leak
2016-03-11Merge tag 'pm+acpi-4.5-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "Two more fixes for issues introduced recently, one in the generic device properties framework and one in ACPICA. Specifics: - Revert a recent ACPICA commit that has been reverted upstream, because it caused problems to happen on user systems and the problem it attempted to address will not be relevant any more after upcoming ACPI specification changes (Bob Moore). - Fix crash in the generic device properties framework introduced by a recent change that forgot to check pointers against error values in addition to checking them against NULL (Heikki Krogerus)" * tag 'pm+acpi-4.5-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: fwnode->secondary may contain ERR_PTR(-ENODEV) ACPICA: Revert "Parser: Fix for SuperName method invocation"
2016-03-11Merge branch 'synaptics-rmi4' into nextDmitry Torokhov
Bring in support for devices using Synaptics RMI4 protocol, including RMI4 bus, 2D sensor and button handlers, and SPI and I2C interface drivers.
2016-03-11Merge branches 'device-properties-fixes' and 'acpica-fixes'Rafael J. Wysocki
* device-properties-fixes: device property: fwnode->secondary may contain ERR_PTR(-ENODEV) * acpica-fixes: ACPICA: Revert "Parser: Fix for SuperName method invocation"
2016-03-11drm/i915: Actually retry with bit-banging after GMBUS timeoutVille Syrjälä
After the GMBUS transfer times out, we set force_bit=1 and return -EAGAIN expecting the i2c core to call the .master_xfer hook again so that we will retry the same transfer via bit-banging. This is in case the gmbus hardware is somehow faulty. Unfortunately we left adapter->retries to 0, meaning the i2c core didn't actually do the retry. Let's tell the core we want one retry when we return -EAGAIN. Note that i2c-algo-bit also uses this retry count for some internal retries, so we'll end up increasing those a bit as well. Cc: Jani Nikula <jani.nikula@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: bffce907d640 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 8b1f165a4a8f64c28cf42d10e1f4d3b451dedc51) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-03-10Input: synaptics-rmi4 - add device tree support to the SPI transport driverAndrew Duggan
Add devicetree binding for SPI devices. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add SPI transport driverAndrew Duggan
Add the transport driver for devices using RMI4 over SPI. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for F30Andrew Duggan
RMI4 F30 supports input from clickpad buttons and controls LEDs located on the touchpad PCB. This patch adds support of the clickpad buttons and defers supporting LEDs for the future. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for F12Andrew Duggan
Function 12 implements 2D touch position sensor for newer Synaptics touch devices. It replaces F11 and no device will contain both functions. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add device tree support for 2d sensors and F11Andrew Duggan
2D sensors have several parameter which can be set in the platform data. This patch adds support for getting those values from devicetree. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for 2D sensors and F11Andrew Duggan
RMI4 currently defines two functions for reporting data for 2D sensors (F11 and F12). This patch adds the common functionality which is shared by devices with 2D reporting along with implementing functionality for F11. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add device tree support for RMI4 I2C devicesAndrew Duggan
Add devicetree binding for I2C devices and add bindings for optional parameters in the function drivers. Parameters for function drivers are defined in child nodes for each of the functions. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add I2C transport driverAndrew Duggan
Add the transport driver for devices using RMI4 over I2C. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for Synaptics RMI4 devicesAndrew Duggan
Synaptics uses the Register Mapped Interface (RMI) protocol as a communications interface for their devices. This driver adds the core functionality needed to interface with RMI4 devices. RMI devices can be connected to the host via several transport protocols and can supports a wide variety of functionality defined by RMI functions. Support for transport protocols and RMI functions are implemented in individual drivers. The RMI4 core driver uses a bus architecture to facilitate the various combinations of transport and function drivers needed by a particular device. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Three bug fixes: - The fix for the page table corruption (CVE-2016-2143) - The diagnose statistics introduced a regression for the dasd diag driver - Boot crash on systems without the set-program-parameters facility" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: four page table levels vs. fork s390/cpumf: Fix lpp detection s390/dasd: fix diag 0x250 inline assembly
2016-03-10[media] media-device: map new functions into old types for legacy APIMauro Carvalho Chehab
The legacy media controller userspace API exposes entity types that carry both type and function information. The new API replaces the type with a function. It preserves backward compatibility by defining legacy functions for the existing types and using them in drivers. This works fine, as long as newer entity functions won't be added. Unfortunately, some tools, like media-ctl with --print-dot argument rely on the now legacy MEDIA_ENT_T_V4L2_SUBDEV and MEDIA_ENT_T_DEVNODE numeric ranges to identify what entities will be shown. Also, if the entity doesn't match those ranges, it will ignore the major/minor information on devnodes, and won't be getting the devnode name via udev or sysfs. As we're now adding devices outside the old range, the legacy ioctl needs to map the new entity functions into a type at the old range, or otherwise we'll have a regression. Detected on all released media-ctl versions (e. g. versions <= 1.10). Fix this by deriving the type from the function to emulate the legacy API if the function isn't in the legacy functions range. Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-10dmaengine: at_xdmac: fix residue computationLudovic Desroches
When computing the residue we need two pieces of information: the current descriptor and the remaining data of the current descriptor. To get that information, we need to read consecutively two registers but we can't do it in an atomic way. For that reason, we have to check manually that current descriptor has not changed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Suggested-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Reported-by: David Engraf <david.engraf@sysgo.com> Tested-by: David Engraf <david.engraf@sysgo.com> Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Cc: stable@vger.kernel.org #4.1 and later Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-09Merge tag 'spi-fix-v4.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few driver specific fixes for the Rockchip and i.MX SPI controllers, especially for the i.MX they're annoying bugs if you run into them" * tag 'spi-fix-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: imx: fix spi resource leak with dma transfer spi: imx: allow only WML aligned transfers to use DMA spi: rockchip: add missing spi_master_put spi: rockchip: disable runtime pm when in err case
2016-03-10Merge remote-tracking branch 'spi/fix/rockchip' into spi-linusMark Brown
2016-03-10Merge remote-tracking branch 'spi/fix/imx' into spi-linusMark Brown
2016-03-09Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A few imx fixes I missed from a couple of weeks ago, they still aren't that big and fix some regression and a fail to boot problem. Other than that, a couple of regression fixes for radeon/amdgpu, one regression fix for vmwgfx and one regression fix for tda998x" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/radeon/pm: adjust display configuration after powerstate" drm/amdgpu/dp: add back special handling for NUTMEG drm/radeon/dp: add back special handling for NUTMEG drm/i2c: tda998x: Choose between atomic or non atomic dpms helper drm/vmwgfx: Add back ->detect() and ->fill_modes() drm/radeon: Fix error handling in radeon_flip_work_func. drm/amdgpu: Fix error handling in amdgpu_flip_work_func. drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats drm/imx: notify DRM core about CRTC vblank state gpu: ipu-v3: Reset IPU before activating IRQ gpu: ipu-v3: Do not bail out on missing optional port nodes
generated by cgit (git 2.34.1) at 2025-09-11 06:06:11 +0000