summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-04-02drm/mediatek: Fix an error code in mtk_hdmi_dt_parse_pdata()Dan Carpenter
We don't want to overwrite "ret", it already holds the correct error code. The "regmap" variable might be a valid pointer as this point. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-04-01nfp: flower: remove vlan CFI bit from push vlan actionPieter Jansen van Vuuren
We no longer set CFI when pushing vlan tags, therefore we remove the CFI bit from push vlan. Fixes: 1a1e586f54bf ("nfp: add basic action capabilities to flower offloads") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01nfp: flower: replace CFI with vlan presentPieter Jansen van Vuuren
Replace vlan CFI bit with a vlan present bit that indicates the presence of a vlan tag. Previously the driver incorrectly assumed that an vlan id of 0 is not matchable, therefore we indicate vlan presence with a vlan present bit. Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01cpufreq/intel_pstate: Load only on Intel hardwareBorislav Petkov
This driver is Intel-only so loading on anything which is not Intel is pointless. Prevent it from doing so. While at it, correct the "not supported" print statement to say CPU "model" which is what that test does. Fixes: 076b862c7e44 (cpufreq: intel_pstate: Add reasons for failure and debug messages) Suggested-by: Erwan Velu <e.velu@criteo.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-01dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errorsIlya Dryomov
Some devices don't use blk_integrity but still want stable pages because they do their own checksumming. Examples include rbd and iSCSI when data digests are negotiated. Stacking DM (and thus LVM) on top of these devices results in sporadic checksum errors. Set BDI_CAP_STABLE_WRITES if any underlying device has it set. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01dm: revert 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * ↵Mikulas Patocka
PAGE_SIZE") The limit was already incorporated to dm-crypt with commit 4e870e948fba ("dm crypt: fix error with too large bios"), so we don't need to apply it globally to all targets. The quantity BIO_MAX_PAGES * PAGE_SIZE is wrong anyway because the variable ti->max_io_len it is supposed to be in the units of 512-byte sectors not in bytes. Reduction of the limit to 1048576 sectors could even cause data corruption in rare cases - suppose that we have a dm-striped device with stripe size 768MiB. The target will call dm_set_target_max_io_len with the value 1572864. The buggy code would reduce it to 1048576. Now, the dm-core will errorneously split the bios on 1048576-sector boundary insetad of 1572864-sector boundary and pass these stripe-crossing bios to the striped target. Cc: stable@vger.kernel.org # v4.16+ Fixes: 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01dm init: fix const confusion for dm_allowed_targets arrayAndi Kleen
A non const pointer to const cannot be marked initconst. Mark the array actually const. Fixes: 6bbc923dfcf5 dm: add support to directly boot to a mapped device Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01dm integrity: make dm_integrity_init and dm_integrity_exit staticYueHaibing
Fix sparse warnings: drivers/md/dm-integrity.c:3619:12: warning: symbol 'dm_integrity_init' was not declared. Should it be static? drivers/md/dm-integrity.c:3638:6: warning: symbol 'dm_integrity_exit' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01dm integrity: change memcmp to strncmp in dm_integrity_ctrMikulas Patocka
If the string opt_string is small, the function memcmp can access bytes that are beyond the terminating nul character. In theory, it could cause segfault, if opt_string were located just below some unmapped memory. Change from memcmp to strncmp so that we don't read bytes beyond the end of the string. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01i40e: add tracking of AF_XDP ZC state for each queue pairBjörn Töpel
In commit f3fef2b6e1cc ("i40e: Remove umem from VSI") a regression was introduced; When the VSI was reset, the setup code would try to enable AF_XDP ZC unconditionally (as long as there was a umem placed in the netdev._rx struct). Here, we add a bitmap to the VSI that tracks if a certain queue pair has been "zero-copy enabled" via the ndo_bpf. The bitmap is used in i40e_xsk_umem, and enables zero-copy if and only if XDP is enabled, the corresponding qid in the bitmap is set and the umem is non-NULL. Fixes: f3fef2b6e1cc ("i40e: Remove umem from VSI") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-01md: batch flush requests.NeilBrown
Currently if many flush requests are submitted to an md device is quick succession, they are serialized and can take a long to process them all. We don't really need to call flush all those times - a single flush call can satisfy all requests submitted before it started. So keep track of when the current flush started and when it finished, allow any pending flush that was requested before the flush started to complete without waiting any more. Test results from Xiao: Test is done on a raid10 device which is created by 4 SSDs. The tool is dbench. 1. The latest linux stable kernel Operation Count AvgLat MaxLat -------------------------------------------------- Deltree 768 10.509 78.305 Flush 2078376 0.013 10.094 Close 21787697 0.019 18.821 LockX 96580 0.007 3.184 Mkdir 384 0.008 0.062 Rename 1255883 0.191 23.534 ReadX 46495589 0.020 14.230 WriteX 14790591 7.123 60.706 Unlink 5989118 0.440 54.551 UnlockX 96580 0.005 2.736 FIND_FIRST 10393845 0.042 12.079 SET_FILE_INFORMATION 2415558 0.129 10.088 QUERY_FILE_INFORMATION 4711725 0.005 8.462 QUERY_PATH_INFORMATION 26883327 0.032 21.715 QUERY_FS_INFORMATION 4929409 0.010 8.238 NTCreateX 29660080 0.100 53.268 Throughput 1034.88 MB/sec (sync open) 128 clients 128 procs max_latency=60.712 ms 2. With patch1 "Revert "MD: fix lock contention for flush bios"" Operation Count AvgLat MaxLat -------------------------------------------------- Deltree 256 8.326 36.761 Flush 693291 3.974 180.269 Close 7266404 0.009 36.929 LockX 32160 0.006 0.840 Mkdir 128 0.008 0.021 Rename 418755 0.063 29.945 ReadX 15498708 0.007 7.216 WriteX 4932310 22.482 267.928 Unlink 1997557 0.109 47.553 UnlockX 32160 0.004 1.110 FIND_FIRST 3465791 0.036 7.320 SET_FILE_INFORMATION 805825 0.015 1.561 QUERY_FILE_INFORMATION 1570950 0.005 2.403 QUERY_PATH_INFORMATION 8965483 0.013 14.277 QUERY_FS_INFORMATION 1643626 0.009 3.314 NTCreateX 9892174 0.061 41.278 Throughput 345.009 MB/sec (sync open) 128 clients 128 procs max_latency=267.939 m 3. With patch1 and patch2 Operation Count AvgLat MaxLat -------------------------------------------------- Deltree 768 9.570 54.588 Flush 2061354 0.666 15.102 Close 21604811 0.012 25.697 LockX 95770 0.007 1.424 Mkdir 384 0.008 0.053 Rename 1245411 0.096 12.263 ReadX 46103198 0.011 12.116 WriteX 14667988 7.375 60.069 Unlink 5938936 0.173 30.905 UnlockX 95770 0.005 4.147 FIND_FIRST 10306407 0.041 11.715 SET_FILE_INFORMATION 2395987 0.048 7.640 QUERY_FILE_INFORMATION 4672371 0.005 9.291 QUERY_PATH_INFORMATION 26656735 0.018 19.719 QUERY_FS_INFORMATION 4887940 0.010 7.654 NTCreateX 29410811 0.059 28.551 Throughput 1026.21 MB/sec (sync open) 128 clients 128 procs max_latency=60.075 ms Cc: <stable@vger.kernel.org> # v4.19+ Tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01Revert "MD: fix lock contention for flush bios"NeilBrown
This reverts commit 5a409b4f56d50b212334f338cb8465d65550cd85. This patch has two problems. 1/ it make multiple calls to submit_bio() from inside a make_request_fn. The bios thus submitted will be queued on current->bio_list and not submitted immediately. As the bios are allocated from a mempool, this can theoretically result in a deadlock - all the pool of requests could be in various ->bio_list queues and a subsequent mempool_alloc could block waiting for one of them to be released. 2/ It aims to handle a case when there are many concurrent flush requests. It handles this by submitting many requests in parallel - all of which are identical and so most of which do nothing useful. It would be more efficient to just send one lower-level request, but allow that to satisfy multiple upper-level requests. Fixes: 5a409b4f56d5 ("MD: fix lock contention for flush bios") Cc: <stable@vger.kernel.org> # v4.19+ Tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01Don't jump to compute_result state from check_result stateNigel Croxon
Changing state from check_state_check_result to check_state_compute_result not only is unsafe but also doesn't appear to serve a valid purpose. A raid6 check should only be pushing out extra writes if doing repair and a mis-match occurs. The stripe dev management will already try and do repair writes for failing sectors. This patch makes the raid6 check_state_check_result handling work more like raid5's. If somehow too many failures for a check, just quit the check operation for the stripe. When any checks pass, don't try and use check_state_compute_result for a purpose it isn't needed for and is unsafe for. Just mark the stripe as in sync for passing its parity checks and let the stripe dev read/write code and the bad blocks list do their job handling I/O errors. Repro steps from Xiao: These are the steps to reproduce this problem: 1. redefined OPT_MEDIUM_ERR_ADDR to 12000 in scsi_debug.c 2. insmod scsi_debug.ko dev_size_mb=11000 max_luns=1 num_tgts=1 3. mdadm --create /dev/md127 --level=6 --raid-devices=5 /dev/sde1 /dev/sde2 /dev/sde3 /dev/sde5 /dev/sde6 sde is the disk created by scsi_debug 4. echo "2" >/sys/module/scsi_debug/parameters/opts 5. raid-check It panic: [ 4854.730899] md: data-check of RAID array md127 [ 4854.857455] sd 5:0:0:0: [sdr] tag#80 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.859246] sd 5:0:0:0: [sdr] tag#80 Sense Key : Medium Error [current] [ 4854.860694] sd 5:0:0:0: [sdr] tag#80 Add. Sense: Unrecovered read error [ 4854.862207] sd 5:0:0:0: [sdr] tag#80 CDB: Read(10) 28 00 00 00 2d 88 00 04 00 00 [ 4854.864196] print_req_error: critical medium error, dev sdr, sector 11656 flags 0 [ 4854.867409] sd 5:0:0:0: [sdr] tag#100 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.869469] sd 5:0:0:0: [sdr] tag#100 Sense Key : Medium Error [current] [ 4854.871206] sd 5:0:0:0: [sdr] tag#100 Add. Sense: Unrecovered read error [ 4854.872858] sd 5:0:0:0: [sdr] tag#100 CDB: Read(10) 28 00 00 00 2e e0 00 00 08 00 [ 4854.874587] print_req_error: critical medium error, dev sdr, sector 12000 flags 4000 [ 4854.876456] sd 5:0:0:0: [sdr] tag#101 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.878552] sd 5:0:0:0: [sdr] tag#101 Sense Key : Medium Error [current] [ 4854.880278] sd 5:0:0:0: [sdr] tag#101 Add. Sense: Unrecovered read error [ 4854.881846] sd 5:0:0:0: [sdr] tag#101 CDB: Read(10) 28 00 00 00 2e e8 00 00 08 00 [ 4854.883691] print_req_error: critical medium error, dev sdr, sector 12008 flags 4000 [ 4854.893927] sd 5:0:0:0: [sdr] tag#166 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.896002] sd 5:0:0:0: [sdr] tag#166 Sense Key : Medium Error [current] [ 4854.897561] sd 5:0:0:0: [sdr] tag#166 Add. Sense: Unrecovered read error [ 4854.899110] sd 5:0:0:0: [sdr] tag#166 CDB: Read(10) 28 00 00 00 2e e0 00 00 10 00 [ 4854.900989] print_req_error: critical medium error, dev sdr, sector 12000 flags 0 [ 4854.902757] md/raid:md127: read error NOT corrected!! (sector 9952 on sdr1). [ 4854.904375] md/raid:md127: read error NOT corrected!! (sector 9960 on sdr1). [ 4854.906201] ------------[ cut here ]------------ [ 4854.907341] kernel BUG at drivers/md/raid5.c:4190! raid5.c:4190 above is this BUG_ON: handle_parity_checks6() ... BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */ Cc: <stable@vger.kernel.org> # v3.16+ OriginalAuthor: David Jeffery <djeffery@redhat.com> Cc: Xiao Ni <xni@redhat.com> Tested-by: David Jeffery <djeffery@redhat.com> Signed-off-by: David Jeffy <djeffery@redhat.com> Signed-off-by: Nigel Croxon <ncroxon@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block: loop: mark bvec as ITER_BVEC_FLAG_NO_REFMing Lei
loop is one block device, for any bio submitted to this device, the upper layer does guarantee that pages added to loop's bio won't go away when the bio is in-flight. So mark loop's bvec as ITER_BVEC_FLAG_NO_REF then get_page/put_page can be saved for serving loop's IO. Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01block: pass page to xen_biovec_phys_mergeableMing Lei
xen_biovec_phys_mergeable() only needs .bv_page of the 2nd bio bvec for checking if the two bvecs can be merged, so pass page to xen_biovec_phys_mergeable() directly. No function change. Cc: ris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: xen-devel@lists.xenproject.org Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01i40e: move i40e_xsk_umem functionBjörn Töpel
The i40e_xsk_umem function was explicitly inlined in i40e.h. There is no reason for that, so move it to i40e_main.c instead. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-01drm/i915: Always backoff after a drm_modeset_lock() deadlockChris Wilson
If drm_modeset_lock() reports a deadlock it sets the ctx->contexted field and insists that the caller calls drm_modeset_backoff() or else it generates a WARN on cleanup. <4> [1601.870376] WARNING: CPU: 3 PID: 8445 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x35/0x40 <4> [1601.870395] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal i915 coretemp crct10dif_pclmul <6> [1601.870403] Console: switching <4> [1601.870403] snd_hda_intel <4> [1601.870406] to colour frame buffer device 320x90 <4> [1601.870406] crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel e1000e snd_hda_core cdc_ether ptp usbnet mii pps_core snd_pcm i2c_i801 mei_me mei prime_numbers <4> [1601.870422] CPU: 3 PID: 8445 Comm: cat Tainted: G U 5.0.0-rc7-CI-CI_DRM_5650+ #1 <4> [1601.870424] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.2402.AD3.1810170014 10/17/2018 <4> [1601.870427] RIP: 0010:drm_modeset_drop_locks+0x35/0x40 <4> [1601.870430] Code: 29 48 8b 43 60 48 8d 6b 60 48 39 c5 74 19 48 8b 43 60 48 8d b8 70 ff ff ff e8 87 ff ff ff 48 8b 43 60 48 39 c5 75 e7 5b 5d c3 <0f> 0b eb d3 0f 1f 80 00 00 00 00 41 56 41 55 41 54 55 53 48 8b 6f <4> [1601.870432] RSP: 0018:ffffc90000d67ce8 EFLAGS: 00010282 <4> [1601.870435] RAX: 00000000ffffffdd RBX: ffffc90000d67d00 RCX: 5dbbe23d00000000 <4> [1601.870437] RDX: 0000000000000000 RSI: 0000000093e6194a RDI: ffffc90000d67d00 <4> [1601.870439] RBP: ffff88849e62e678 R08: 0000000003b7329a R09: 0000000000000001 <4> [1601.870441] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888492100410 <4> [1601.870442] R13: ffff88849ea50958 R14: ffff8884a67eb028 R15: ffff8884a67eb028 <4> [1601.870445] FS: 00007fa7a27745c0(0000) GS:ffff8884aff80000(0000) knlGS:0000000000000000 <4> [1601.870447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [1601.870449] CR2: 000055af07e66000 CR3: 00000004a8cc2006 CR4: 0000000000760ee0 <4> [1601.870451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4> [1601.870453] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 <4> [1601.870454] PKRU: 55555554 <4> [1601.870456] Call Trace: <4> [1601.870505] i915_dsc_fec_support_show+0x91/0x190 [i915] <4> [1601.870522] seq_read+0xdb/0x3c0 <4> [1601.870531] full_proxy_read+0x51/0x80 <4> [1601.870538] __vfs_read+0x31/0x190 <4> [1601.870546] ? __se_sys_newfstat+0x3c/0x60 <4> [1601.870552] vfs_read+0x9e/0x150 <4> [1601.870557] ksys_read+0x50/0xc0 <4> [1601.870564] do_syscall_64+0x55/0x190 <4> [1601.870569] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [1601.870572] RIP: 0033:0x7fa7a226d081 <4> [1601.870574] Code: fe ff ff 48 8d 3d 67 9c 0a 00 48 83 ec 08 e8 a6 4c 02 00 66 0f 1f 44 00 00 48 8d 05 81 08 2e 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53 <4> [1601.870576] RSP: 002b:00007ffcc05140c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 <4> [1601.870579] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fa7a226d081 <4> [1601.870581] RDX: 0000000000020000 RSI: 000055af07e63000 RDI: 0000000000000007 <4> [1601.870583] RBP: 0000000000020000 R08: 000000000000007b R09: 0000000000000000 <4> [1601.870585] R10: 000055af07e60010 R11: 0000000000000246 R12: 000055af07e63000 <4> [1601.870587] R13: 0000000000000007 R14: 000055af07e634bf R15: 0000000000020000 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109745 Fixes: e845f099f1c6 ("drm/i915/dsc: Add Per connector debugfs node for DSC support/enable") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190329165152.29259-1-chris@chris-wilson.co.uk (cherry picked from commit ee6df5694a9a2e30566ae05e9c145a0f6d5e087f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-04-01loop: properly observe rotational flag of underlying deviceHolger Hoffstätte
The loop driver always declares the rotational flag of its device as rotational, even when the device of the mapped file is nonrotational, as is the case with SSDs or on tmpfs. This can confuse filesystem tools which are SSD-aware; in my case I frequently forget to tell mkfs.btrfs that my loop device on tmpfs is nonrotational, and that I really don't need any automatic metadata redundancy. The attached patch fixes this by introspecting the rotational flag of the mapped file's underlying block device, if it exists. If the mapped file's filesystem has no associated block device - as is the case on e.g. tmpfs - we assume nonrotational storage. If there is a better way to identify such non-devices I'd love to hear them. Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: holger@applied-asynchrony.com Signed-off-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Benjamin Gordon <bmgordon@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-01HID: i2c-hid: Disable runtime PM on Synaptics touchpadHui Wang
We have a new Dell laptop which has the synaptics I2C touchpad (06cb:7e7e) on it. After booting up the Linux, the touchpad doesn't work, there is no interrupt when touching the touchpad, after disable the runtime PM, everything works well. I also tried the quirk of I2C_HID_QUIRK_DELAY_AFTER_SLEEP, it is better after applied this quirk, there are interrupts but data it reports is invalid. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-03-31net: stmmac: don't log oversized framesAaro Koskinen
This is log is harmful as it can trigger multiple times per packet. Delete it. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31net: stmmac: fix dropping of multi-descriptor RX framesAaro Koskinen
Packets without the last descriptor set should be dropped early. If we receive a frame larger than the DMA buffer, the HW will continue using the next descriptor. Driver mistakes these as individual frames, and sometimes a truncated frame (without the LD set) may look like a valid packet. This fixes a strange issue where the system replies to 4098-byte ping although the MTU/DMA buffer size is set to 4096, and yet at the same time it's logging an oversized packet. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31net: stmmac: don't overwrite discard_frame statusAaro Koskinen
If we have error bits set, the discard_frame status will get overwritten by checksum bit checks, which might set the status back to good one. Fix by checking the COE status only if the frame is good. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31net: stmmac: don't stop NAPI processing when dropping a packetAaro Koskinen
Currently, if we drop a packet, we exit from NAPI loop before the budget is consumed. In some situations this will make the RX processing stall e.g. when flood pinging the system with oversized packets, as the errorneous packets are not dropped efficiently. If we drop a packet, we should just continue to the next one as long as the budget allows. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31net: stmmac: ratelimit RX error logsAaro Koskinen
Ratelimit RX error logs. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31net: stmmac: use correct DMA buffer size in the RX descriptorAaro Koskinen
We always program the maximum DMA buffer size into the receive descriptor, although the allocated size may be less. E.g. with the default MTU size we allocate only 1536 bytes. If somebody sends us a bigger frame, then memory may get corrupted. Fix by using exact buffer sizes. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31Merge tag 'dmaengine-fix-5.1-rc3' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: - Revert "dmaengine: stm32-mdma: Add a check on read_u32_array" as that caused regression - Fix MAINTAINER file uniphier-mdmac.c file path * tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma: MAINTAINERS: Fix uniphier-mdmac.c file path dmaengine: stm32-mdma: Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
2019-03-31iio: core: fix a possible circular locking dependencyFabrice Gasnier
This fixes a possible circular locking dependency detected warning seen with: - CONFIG_PROVE_LOCKING=y - consumer/provider IIO devices (ex: "voltage-divider" consumer of "adc") When using the IIO consumer interface, e.g. iio_channel_get(), the consumer device will likely call iio_read_channel_raw() or similar that rely on 'info_exist_lock' mutex. typically: ... mutex_lock(&chan->indio_dev->info_exist_lock); if (chan->indio_dev->info == NULL) { ret = -ENODEV; goto err_unlock; } ret = do_some_ops() err_unlock: mutex_unlock(&chan->indio_dev->info_exist_lock); return ret; ... Same mutex is also hold in iio_device_unregister(). The following deadlock warning happens when: - the consumer device has called an API like iio_read_channel_raw() at least once. - the consumer driver is unregistered, removed (unbind from sysfs) ====================================================== WARNING: possible circular locking dependency detected 4.19.24 #577 Not tainted ------------------------------------------------------ sh/372 is trying to acquire lock: (kn->count#30){++++}, at: kernfs_remove_by_name_ns+0x3c/0x84 but task is already holding lock: (&dev->info_exist_lock){+.+.}, at: iio_device_unregister+0x18/0x60 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&dev->info_exist_lock){+.+.}: __mutex_lock+0x70/0xa3c mutex_lock_nested+0x1c/0x24 iio_read_channel_raw+0x1c/0x60 iio_read_channel_info+0xa8/0xb0 dev_attr_show+0x1c/0x48 sysfs_kf_seq_show+0x84/0xec seq_read+0x154/0x528 __vfs_read+0x2c/0x15c vfs_read+0x8c/0x110 ksys_read+0x4c/0xac ret_fast_syscall+0x0/0x28 0xbedefb60 -> #0 (kn->count#30){++++}: lock_acquire+0xd8/0x268 __kernfs_remove+0x288/0x374 kernfs_remove_by_name_ns+0x3c/0x84 remove_files+0x34/0x78 sysfs_remove_group+0x40/0x9c sysfs_remove_groups+0x24/0x34 device_remove_attrs+0x38/0x64 device_del+0x11c/0x360 cdev_device_del+0x14/0x2c iio_device_unregister+0x24/0x60 release_nodes+0x1bc/0x200 device_release_driver_internal+0x1a0/0x230 unbind_store+0x80/0x130 kernfs_fop_write+0x100/0x1e4 __vfs_write+0x2c/0x160 vfs_write+0xa4/0x17c ksys_write+0x4c/0xac ret_fast_syscall+0x0/0x28 0xbe906840 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->info_exist_lock); lock(kn->count#30); lock(&dev->info_exist_lock); lock(kn->count#30); *** DEADLOCK *** ... cdev_device_del() can be called without holding the lock. It should be safe as info_exist_lock prevents kernelspace consumers to use the exported routines during/after provider removal. cdev_device_del() is for userspace. Help to reproduce: See example: Documentation/devicetree/bindings/iio/afe/voltage-divider.txt sysv { compatible = "voltage-divider"; io-channels = <&adc 0>; output-ohms = <22>; full-ohms = <222>; }; First, go to iio:deviceX for the "voltage-divider", do one read: $ cd /sys/bus/iio/devices/iio:deviceX $ cat in_voltage0_raw Then, unbind the consumer driver. It triggers above deadlock warning. $ cd /sys/bus/platform/drivers/iio-rescale/ $ echo sysv > unbind Note I don't actually expect stable will pick this up all the way back into IIO being in staging, but if's probably valid that far back. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Fixes: ac917a81117c ("staging:iio:core set the iio_dev.info pointer to null on unregister") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-03-30Merge tag 'led-fixes-for-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: - fix refcnt leak on interface rename - use memcpy in device_name_store() to avoid including garbage from a previous, longer value in the device_name - fix a potential NULL pointer dereference in case of_match_device() cannot find a match * tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: trigger: netdev: use memcpy in device_name_store leds: pca9532: fix a potential NULL pointer dereference leds: trigger: netdev: fix refcnt leak on interface rename
2019-03-30Merge tag 'gpio-v5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "As you can see [in the git history] I was away on leave and Bartosz kindly stepped in and collected a slew of fixes, I pulled them into my tree in two sets and merged some two more fixes (fixing my own caused bugs) on top. Summary: - Revert the extended use of gpio_set_config() and think about how we can do this properly. - Fix up the SPI CS GPIO handling so it now works properly on the SPI bus children, as intended. - Error paths and driver fixes" * tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mockup: use simple_read_from_buffer() in debugfs read callback gpio: of: Fix of_gpiochip_add() error path gpio: of: Check for "spi-cs-high" in child instead of parent node gpio: of: Check propname before applying "cs-gpios" quirks gpio: mockup: fix debugfs read Revert "gpio: use new gpio_set_config() helper in more places" gpio: aspeed: fix a potential NULL pointer dereference gpio: amd-fch: Fix bogus SPDX identifier gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input gpio: exar: add a check for the return value of ida_simple_get fails
2019-03-30leds: trigger: netdev: use memcpy in device_name_storeRasmus Villemoes
If userspace doesn't end the input with a newline (which can easily happen if the write happens from a C program that does write(fd, iface, strlen(iface))), we may end up including garbage from a previous, longer value in the device_name. For example # cat device_name # printf 'eth12' > device_name # cat device_name eth12 # printf 'eth3' > device_name # cat device_name eth32 I highly doubt anybody is relying on this behaviour, so switch to simply copying the bytes (we've already checked that size is < IFNAMSIZ) and unconditionally zero-terminate it; of course, we also still have to strip a trailing newline. This is also preparation for future patches. Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-30r8169: disable default rx interrupt coalescing on RTL8168Heiner Kallweit
It was reported that re-introducing ASPM, in combination with RX interrupt coalescing, results in significantly increased packet latency, see [0]. Disabling ASPM or RX interrupt coalescing fixes the issue. Therefore change the driver's default to disable RX interrupt coalescing. Users still have the option to enable RX coalescing via ethtool. [0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=925496 Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Reported-by: Mike Crowe <mac@mcrowe.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-30leds: pca9532: fix a potential NULL pointer dereferenceKangjie Lu
In case of_match_device cannot find a match, return -EINVAL to avoid NULL pointer dereference. Fixes: fa4191a609f2 ("leds: pca9532: Add device tree support") Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-30Merge tag 'staging-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.1-rc3, and one driver removal. The biggest thing here is the removal of the mt7621-eth driver as a "real" network driver was merged in 5.1-rc1 for this hardware, so this old driver can now be removed. Other than that, there are just a number of small fixes, all resolving reported issues and some potential corner cases for error handling paths. All of these have been in linux-next with no reported issues" * tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt6655: Remove vif check from vnt_interrupt staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir() staging: octeon-ethernet: fix incorrect PHY mode staging: vc04_services: Fix an error code in vchiq_probe() staging: erofs: fix error handling when failed to read compresssed data staging: vt6655: Fix interrupt race condition on device start up. staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc staging: rtl8712: uninitialized memory in read_bbreg_hdl() staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc staging, mt7621-pci: fix build without pci support staging: speakup_soft: Fix alternate speech with other synths staging: axis-fifo: add CONFIG_OF dependency staging: olpc_dcon_xo_1: add missing 'const' qualifier staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest staging: erofs: fix to handle error path of erofs_vmap() staging: mt7621-dts: update ethernet settings. staging: remove mt7621-eth
2019-03-30Merge tag 'tty-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 5.1-rc3. Nothing major here, just a number of potential problems fixes for error handling paths, as well as some other minor bugfixes for reported issues with 5.1-rc1. All of these have been in linux-next with no reported issues" * tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix NULL pointer issue when tty_port ops is not set Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc dt-bindings: serial: Add compatible for Mediatek MT8183 tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped tty/serial: atmel: Add is_half_duplex helper serial: sh-sci: Fix setting SCSCR_TIE while transferring data serial: ar933x_uart: Fix build failure with disabled console tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init() tty: mxs-auart: fix a potential NULL pointer dereference tty: atmel_serial: fix a potential NULL pointer dereference serial: max310x: Fix to avoid potential NULL pointer dereference serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
2019-03-30Merge tag 'usb-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.1-rc3. Nothing major at all here, just a small collection of fixes for reported issues, and potential problems with error handling paths. Also a few new device ids, as normal. All of these have been in linux-next with no reported issues" * tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: serial: option: add Olicard 600 USB: serial: cp210x: add new device id usb: u132-hcd: fix resource leak usb: cdc-acm: fix race during wakeup blocking TX traffic usb: mtu3: fix EXTCON dependency usb: usb251xb: fix to avoid potential NULL pointer dereference usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs xhci: Don't let USB3 ports stuck in polling state prevent suspend usb: xhci: dbc: Don't free all memory with spinlock held xhci: Fix port resume done detection for SS ports with LPM enabled USB: serial: mos7720: fix mos_parport refcount imbalance on error path USB: gadget: f_hid: fix deadlock in f_hidg_write() usb: gadget: net2272: Fix net2272_dequeue() usb: gadget: net2280: Fix net2280_dequeue() usb: gadget: net2280: Fix overrun of OUT messages usb: dwc3: pci: add support for Comet Lake PCH ID usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0 usb: common: Consider only available nodes for dr_mode usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps ...
2019-03-30Merge tag 'acpi-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "This corrects a previous attempt to make Linux use its own set of ACPI debug flags different from the upstream ACPICA's default (Erik Schmauss)" * tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: use different default debug value than ACPICA
2019-03-30Merge tag 'pm-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix CPU base frequency reporting in the intel_pstate driver and a use-after-free in the scpi-cpufreq driver. Specifics: - Fix the ACPI CPPC library to actually follow the specification when decoding the guaranteed performance register information and make the intel_pstate driver to fall back to the nominal frequency when reporting the base frequency if the guaranteed performance register information is not there (Srinivas Pandruvada). - Fix use-after-free in the exit callback of the scpi-cpufreq left after an update during the 5.0 development cycle (Vincent Stehlé)" * tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: scpi: Fix use after free cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequency ACPI / CPPC: Fix guaranteed performance handling
2019-03-30libnvdimm/security, acpi/nfit: unify zero-key for all security commandsDave Jiang
With zero-key defined, we can remove previous detection of key id 0 or null key in order to deal with a zero-key situation. Syncing all security commands to use the zero-key. Helper functions are introduced to return the data that points to the actual key payload or the zero_key. This helps uniformly handle the key material even with zero_key. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-03-30libnvdimm/security: provide fix for secure-erase to use zero-keyDave Jiang
Add a zero key in order to standardize hardware that want a key of 0's to be passed. Some platforms defaults to a zero-key with security enabled rather than allow the OS to enable the security. The zero key would allow us to manage those platform as well. This also adds a fix to secure erase so it can use the zero key to do crypto erase. Some other security commands already use zero keys. This introduces a standard zero-key to allow unification of semantics cross nvdimm security commands. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-03-30Merge tag 'iwlwifi-for-kalle-2019-03-22' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes First batch of iwlwifi fixes intended for v5.1 * add some new PCI IDs (plus a struct name change they depend on); * fix crypto with new devices, namely 22560 and above; * a bunch of fixes (and a dependency) for the new debugging infra;
2019-03-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links fs: fs_parser: fix printk format warning checkpatch: add %pt as a valid vsprintf extension mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate drivers/block/zram/zram_drv.c: fix idle/writeback string compare mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate() mm/memory_hotplug.c: fix notification in offline error path ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK fs/proc/kcore.c: make kcore_modules static include/linux/list.h: fix list_is_first() kernel-doc mm/debug.c: fix __dump_page when mapping->host is not set mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified include/linux/hugetlb.h: convert to use vm_fault_t iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging mm: add support for kmem caches in DMA32 zone ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock mm/hotplug: fix offline undo_isolate_page_range() fs/open.c: allow opening only regular files during execve() mailmap: add Changbin Du mm/debug.c: add a cast to u64 for atomic64_read() ...
2019-03-29Merge tag 'meson-clk-fixes-for-5.1-v2' of ↵Stephen Boyd
https://github.com/BayLibre/clk-meson into clk-fixes Pull more fixes for meson clocks from Neil Armstrong: - clk-pll: fix rate rounding fixing meson8b boot failure - vid-pll-div: fix recal_rate warning and return when invalid setting * tag 'meson-clk-fixes-for-5.1-v2' of https://github.com/BayLibre/clk-meson: clk: meson: vid-pll-div: remove warning and return 0 on invalid config clk: meson: pll: fix rounding and setting a rate that matches precisely
2019-03-29Merge tag 'iommu-fixes-v5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Fix a bug in the AMD IOMMU driver not handling exclusion ranges correctly. In fact the driver did not reserve these ranges for IOVA allocations, so that dma-handles could be allocated in an exclusion range, leading to data corruption. Exclusion ranges have not been used by any firmware up to now, so this issue remained undiscovered for quite some time. - Fix wrong warning messages that the IOMMU core code prints when it tries to allocate the default domain for an iommu group and the driver does not support any of the default domain types (like Intel VT-d). * tag 'iommu-fixes-v5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Reserve exclusion range in iova-domain iommu: Don't print warning when IOMMU driver only supports unmanaged domains
2019-03-29Merge tag 'mlx5-fixes-2019-03-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-03-29 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.11 ('net/mlx5: Decrease default mr cache size') For -stable v4.12 ('net/mlx5e: Add a lock on tir list') For -stable v4.13 ('net/mlx5e: Fix error handling when refreshing TIRs') For -stable v4.18 ('net/mlx5e: Update xon formula') For -stable v4.19 ('net: mlx5: Add a missing check on idr_find, free buf') ('net/mlx5e: Update xoff formula') net-next merge Note: When merged with net-next the following simple conflict will appear, drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c ++<<<<<<< HEAD (net) + * max_mtu: netdev's max_mtu ++======= + * @mtu: device's MTU ++>>>>>>> net-next To resolve: just replace the line in net-next * @mtu: device's MTU to * @max_mtu: netdev's max_mtu ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29Merge tag 'char-misc-5.1-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some binder, habanalabs, and vboxguest driver fixes for 5.1-rc3. The Binder fixes resolve some reported issues found by testing, first by the selinux developers, and then earlier today by syzbot. The habanalabs fixes are all minor, resolving a number of tiny things. The vboxguest patches are a bit larger. They resolve the fact that virtual box decided to change their api in their latest release in a way that broke the existing kernel code, despite saying that they were never going to do that. So this is a bit of a "new feature", but is good to get merged so that 5.1 will work with the latest release. The changes are not large and of course virtual box "swears" they will not break this again, but no one is holding their breath here. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x binder: fix race between munmap() and direct reclaim binder: fix BUG_ON found by selinux-testsuite habanalabs: cast to expected type habanalabs: prevent host crash during suspend/resume habanalabs: perform accounting for active CS habanalabs: fix mapping with page size bigger than 4KB habanalabs: complete user context cleanup before hard reset habanalabs: fix bug when mapping very large memory area habanalabs: fix MMU number of pages calculation
2019-03-29Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Thirteen fixes, seven of which are for IBM fibre channel and three additional for fairly serious bugs in drivers (qla2xxx, mpt3sas, aacraid). Of the three core fixes, the most significant is probably the missed run queue causing an indefinite hang. The others are fixing a potential use after free on device close and silencing an incorrect warning" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvfc: Clean up transport events scsi: ibmvfc: Byte swap status and error codes when logging scsi: ibmvfc: Add failed PRLI to cmd_status lookup array scsi: ibmvfc: Remove "failed" from logged errors scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host scsi: sd: Quiesce warning if device does not report optimal I/O size scsi: sd: Fix a race between closing an sd device and sd I/O scsi: core: Run queue when state is set to running after being blocked scsi: qla4xxx: fix a potential NULL pointer dereference scsi: aacraid: Insure we don't access PCIe space during AER/EEH scsi: mpt3sas: Fix kernel panic during expander reset
2019-03-29Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A new ID for the i801 driver and some Documentation fixes to make it easier for people to find the bindings (which is also a basis for further improvements in that area)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: wmt: make bindings file name match the driver i2c: sun6i-p2wi: make bindings file name match the driver i2c: stu300: make bindings file name match the driver i2c: mt65xx: make bindings file name match the driver i2c: iop3xx: make bindings file name match the driver i2c: i801: Add support for Intel Comet Lake
2019-03-29Merge tag 'for-linus-20190329' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Small set of fixes that should go into this series. This contains: - compat signal mask fix for io_uring (Arnd) - EAGAIN corner case for direct vs buffered writes for io_uring (Roman) - NVMe pull request from Christoph with various little fixes - sbitmap ws_active fix, which caused a perf regression for shared tags (me) - sbitmap bit ordering fix (Ming) - libata on-stack DMA fix (Raymond)" * tag 'for-linus-20190329' of git://git.kernel.dk/linux-block: nvmet: fix error flow during ns enable nvmet: fix building bvec from sg list nvme-multipath: relax ANA state check nvme-tcp: fix an endianess miss-annotation libata: fix using DMA buffers on stack io_uring: offload write to async worker in case of -EAGAIN sbitmap: order READ/WRITE freed instance and setting clear bit blk-mq: fix sbitmap ws_active for shared tags io_uring: fix big-endian compat signal mask handling blk-mq: update comment for blk_mq_hctx_has_pending() blk-mq: use blk_mq_put_driver_tag() to put tag
2019-03-29Revert "cxgb4: Update 1.23.3.0 as the latest firmware supported."David S. Miller
This reverts commit 4d31c4fa3f9ef7b7e2e79fd57d21290f64c938f5. Accidently applied this to the wrong tree. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29cxgb4: Update 1.23.3.0 as the latest firmware supported.Vishal Kulkarni
Change t4fw_version.h to update latest firmware version number to 1.23.3.0. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 01:50:44 +0000