summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-01-17usb: core: hub: disable autosuspend for TI TUSB8041Flavio Suligoi
The Texas Instruments TUSB8041 has an autosuspend problem at high temperature. If there is not USB traffic, after a couple of ms, the device enters in autosuspend mode. In this condition the external clock stops working, to save energy. When the USB activity turns on, ther hub exits the autosuspend state, the clock starts running again and all works fine. At ambient temperature all works correctly, but at high temperature, when the USB activity turns on, the external clock doesn't restart and the hub disappears from the USB bus. Disabling the autosuspend mode for this hub solves the issue. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()Maciej Żenczykowski
In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... Cc: Felipe Balbi <balbi@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Carlos Llamas <cmllamas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230117131839.1138208-1-maze@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17USB: gadget: Add ID numbers to configfs-gadget driver namesChanh Nguyen
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out: Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16 This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct. Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") Cc: stable <stable@kernel.org> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Frank Li <frank.li@nxp.com> Link: https://lore.kernel.org/r/20230111065105.29205-1-chanh@os.amperecomputing.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: tcpm: Fix altmode re-registration causes sysfs create failChiYuan Huang
There's the altmode re-registeration issue after data role swap (DR_SWAP). Comparing to USBPD 2.0, in USBPD 3.0, it loose the limit that only DFP can initiate the VDM command to get partner identity information. For a USBPD 3.0 UFP device, it may already get the identity information from its port partner before DR_SWAP. If DR_SWAP send or receive at the mean time, 'send_discover' flag will be raised again. It causes discover identify action restart while entering ready state. And after all discover actions are done, the 'tcpm_register_altmodes' will be called. If old altmode is not unregistered, this sysfs create fail can be found. In 'DR_SWAP_CHANGE_DR' state case, only DFP will unregister altmodes. For UFP, the original altmodes keep registered. This patch fix the logic that after DR_SWAP, 'tcpm_unregister_altmodes' must be called whatever the current data role is. Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com> Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together") Reported-by: TommyYl Chen <tommyyl.chen@mediatek.com> Cc: stable@vger.kernel.org Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/1673248790-15794-1-git-send-email-cy_huang@richtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: g_webcam: Send color matching descriptor per frameDaniel Scally
Currently the color matching descriptor is only sent across the wire a single time, following the descriptors for each format and frame. According to the UVC 1.5 Specification 3.9.2.6 ("Color Matching Descriptors"): "Only one instance is allowed for a given format and if present, the Color Matching descriptor shall be placed following the Video and Still Image Frame descriptors for that format". Add another reference to the color matching descriptor after the yuyv frames so that it's correctly transmitted for that format too. Fixes: a9914127e834 ("USB gadget: Webcam device") Cc: stable <stable@kernel.org> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20221216160528.479094-1-dan.scally@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: altmodes/displayport: Use proper macro for pin assignment checkPrashant Malani
While looking at the DP configuration VDO to determine the peripheral configuration, the spec (Table 8-5: DisplayPort Configurations, VESA DisplayPort Alt Mode Standard v2.0) lists the options as "UFP_U as a DP Source/Sink Device". So, use the correct macro while performing this check. Effectively it's the same as the existing code, but the proposed macro describes the state a little better. No functional changes introduced. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230111020546.3384569-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: altmodes/displayport: Fix pin assignment calculationPrashant Malani
Commit c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") fixed the pin assignment calculation to take into account whether the peripheral was a plug or a receptacle. But the "pin_assignments" sysfs logic was not updated. Address this by using the macros introduced in the aforementioned commit in the sysfs logic too. Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230111020546.3384569-2-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: typec: altmodes/displayport: Add pin assignment helperPrashant Malani
The code to extract a peripheral's currently supported Pin Assignments is repeated in a couple of locations. Factor it out into a separate function. This will also make it easier to add fixes (we only need to update 1 location instead of 2). Fixes: c1e5c2f0cb8a ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles") Cc: stable@vger.kernel.org Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230111020546.3384569-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: f_fs: Ensure ep0req is dequeued before free_requestUdipto Goswami
As per the documentation, function usb_ep_free_request guarantees the request will not be queued or no longer be re-queued (or otherwise used). However, with the current implementation it doesn't make sure that the request in ep0 isn't reused. Fix this by dequeuing the ep0req on functionfs_unbind before freeing the request to align with the definition. Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver") Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Tested-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/20221215052906.8993-3-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: gadget: f_fs: Prevent race during ffs_ep0_queue_waitUdipto Goswami
While performing fast composition switch, there is a possibility that the process of ffs_ep0_write/ffs_ep0_read get into a race condition due to ep0req being freed up from functionfs_unbind. Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't bounded so it can go ahead and mark the ep0req to NULL, and since there is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free. Fix this by making a serialized execution between the two functions using a mutex_lock(ffs->mutex). Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver") Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Tested-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/20221215052906.8993-2-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: misc: onboard_hub: Move 'attach' work to the driverMatthias Kaehlcke
Currently each onboard_hub platform device owns an 'attach' work, which is scheduled when the device probes. With this deadlocks have been reported on a Raspberry Pi 3 B+ [1], which has nested onboard hubs. The flow of the deadlock is something like this (with the onboard_hub driver built as a module) [2]: - USB root hub is instantiated - core hub driver calls onboard_hub_create_pdevs(), which creates the 'raw' platform device for the 1st level hub - 1st level hub is probed by the core hub driver - core hub driver calls onboard_hub_create_pdevs(), which creates the 'raw' platform device for the 2nd level hub - onboard_hub platform driver is registered - platform device for 1st level hub is probed - schedules 'attach' work - platform device for 2nd level hub is probed - schedules 'attach' work - onboard_hub USB driver is registered - device (and parent) lock of hub is held while the device is re-probed with the onboard_hub driver - 'attach' work (running in another thread) calls driver_attach(), which blocks on one of the hub device locks - onboard_hub_destroy_pdevs() is called by the core hub driver when one of the hubs is detached - destroying the pdevs invokes onboard_hub_remove(), which waits for the 'attach' work to complete - waits forever, since the 'attach' work can't acquire the device lock Use a single work struct for the driver instead of having a work struct per onboard hub platform driver instance. With that it isn't necessary to cancel the work in onboard_hub_remove(), which fixes the deadlock. The work is only cancelled when the driver is unloaded. [1] https://lore.kernel.org/r/d04bcc45-3471-4417-b30b-5cf9880d785d@i2se.com/ [2] https://lore.kernel.org/all/Y6OrGbqaMy2iVDWB@google.com/ Cc: stable@vger.kernel.org Fixes: 8bc063641ceb ("usb: misc: Add onboard_usb_hub driver") Link: https://lore.kernel.org/r/d04bcc45-3471-4417-b30b-5cf9880d785d@i2se.com/ Link: https://lore.kernel.org/all/Y6OrGbqaMy2iVDWB@google.com/ Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20230110172954.v2.2.I16b51f32db0c32f8a8532900bfe1c70c8572881a@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: misc: onboard_hub: Invert driver registration orderMatthias Kaehlcke
The onboard_hub 'driver' consists of two drivers, a platform driver and a USB driver. Currently when the onboard hub driver is initialized it first registers the platform driver, then the USB driver. This results in a race condition when the 'attach' work is executed, which is scheduled when the platform device is probed. The purpose of fhe 'attach' work is to bind elegible USB hub devices to the onboard_hub USB driver. This fails if the work runs before the USB driver has been registered. Register the USB driver first, then the platform driver. This increases the chances that the onboard_hub USB devices are probed before their corresponding platform device, which the USB driver tries to locate in _probe(). The driver already handles this situation and defers probing if the onboard hub platform device doesn't exist yet. Cc: stable@vger.kernel.org Fixes: 8bc063641ceb ("usb: misc: Add onboard_usb_hub driver") Link: https://lore.kernel.org/lkml/Y6W00vQm3jfLflUJ@hovoldconsulting.com/T/#m0d64295f017942fd988f7c53425db302d61952b4 Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20230110172954.v2.1.I75494ebee7027a50235ce4b1e930fa73a578fbe2@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: ucsi: Ensure connector delayed work items are flushedJack Pham
During ucsi_unregister() when destroying a connector's workqueue, there may still be pending delayed work items that haven't been scheduled yet. Because queue_delayed_work() uses a separate timer to schedule a work item, the destroy_workqueue() call is not aware of any pending items. Hence when a pending item's timer expires it would then try to queue on a dangling workqueue pointer. Fix this by keeping track of all work items in a list, so that prior to destroying the workqueue any pending items can be flushed. Do this by calling mod_delayed_work() as that will cause pending items to get queued immediately, which then allows the ensuing destroy_workqueue() to implicitly drain all currently queued items to completion and free themselves. Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking") Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Co-developed-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Jack Pham <quic_jackp@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230110071218.26261-1-quic_jackp@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: musb: fix error return code in omap2430_probe()Yang Yingliang
Before calling platform_get_resource() in omap2430_probe(), the 'ret' is re-assgined to 0, it can't return an error code, if platform_get_resource fails. Set the error code to -EINVAL to fix this. Fixes: ffbe2feac59b ("usb: musb: omap2430: Fix probe regression for missing resources") Cc: stable <stable@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221230081730.1655616-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)Xu Yang
After successfully probed, ci->role_switch would only be NULL or a valid pointer. IS_ERR(ci->role_switch) will always return 0. So no need to wrap it with IS_ERR, otherwise the logic is wrong. Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20221215055409.3760523-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17drm/bridge: cdns-dsi: Add support for J721E wrapperRahul T R
Add support for wrapper settings for DSI bridge on j721e. Also enable DPI0 --------------- ----------------------- | -------| |------- | | DSS | DPI2 |----->| DPI0 | DSI Wrapper | | -------| |------- | --------------- ----------------------- As shown above DPI2 output of DSS is connected to DPI0 input of DSI Wrapper, DSI wrapper gives control wheather to enable/disable DPI0 input. In j721e above is the only configuration supported Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-6-r-ravikumar@ti.com
2023-01-17drm/bridge: cdns-dsi: Create a header fileRahul T R
Create a header file for cdns dsi and move structure definations to prepare for adding j721e wrapper support Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-5-r-ravikumar@ti.com
2023-01-17drm/bridge: cdns-dsi: Move to drm/bridge/cadenceRahul T R
Move the cadence dsi bridge under drm/bridge/cadence directory, to prepare for adding j721e wrapper support Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-4-r-ravikumar@ti.com
2023-01-17drm/omap: Fix kernel docsTomi Valkeinen
Fix doc related warnings seen with W=1: the function names have changed but the docs have not been changed accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-2-tomi.valkeinen@ideasonboard.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-17xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tablesMathias Nyman
USB3 ports on xHC hosts may have retimers that cause too long exit latency to work with native USB3 U1/U2 link power management states. For now only use usb_acpi_port_lpm_incapable() to evaluate if port lpm should be disabled while setting up the USB3 roothub. Other ways to identify lpm incapable ports can be added here later if ACPI _DSM does not exist. Limit this to Intel hosts for now, this is to my knowledge only an Intel issue. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: acpi: add helper to check port lpm capability using acpi _DSMMathias Nyman
Add a helper to evaluate ACPI usb device specific method (_DSM) provided in case the USB3 port shouldn't enter U1 and U2 link states. This _DSM was added as port specific retimer configuration may lead to exit latencies growing beyond U1/U2 exit limits, and OS needs a way to find which ports can't support U1/U2 link power management states. This _DSM is also used by windows: Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm- Some patch issues found in testing resolved by Ron Lee Cc: stable@vger.kernel.org Tested-by: Ron Lee <ron.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add a flag to disable USB3 lpm on a xhci root port level.Mathias Nyman
One USB3 roothub port may support link power management, while another root port on the same xHC can't due to different retimers used for the ports. This is the case with Intel Alder Lake, and possible future platforms where retimers used for USB4 ports cause too long exit latecy to enable native USB3 lpm U1 and U2 states. Add a flag in the xhci port structure to indicate if the port is lpm_incapable, and check it while calculating exit latency. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Add update_hub_device override for PCI xHCI hostsMathias Nyman
Allow PCI hosts to check and tune roothub and port settings before the hub is up and running. This override is needed to turn off U1 and U2 LPM for some ports based on per port ACPI _DSM, _UPC, or possibly vendor specific mmio values for Intel xHC hosts. Usb core calls the host update_hub_device once it creates a hub. Entering U1 or U2 link power save state on ports with this limitation will cause link to fail, turning the usb device unusable in that setup. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci: Fix null pointer dereference when host diesMathias Nyman
Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: xhci: Check endpoint is valid before dereferencing itJimmy Hu
When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 Fixes: 50e8725e7c42 ("xhci: Refactor command watchdog and fix split string.") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Hu <hhhuuu@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17xhci-pci: set the dma max_seg_sizeRicardo Ribalda
Allow devices to have dma operations beyond 64K, and avoid warnings such as: xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230116142216.1141605-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17drm/i915/display: Check source height is > 0Drew Davenport
The error message suggests that the height of the src rect must be at least 1. Reject source with height of 0. Cc: stable@vger.kernel.org Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221226225246.1.I15dff7bb5a0e485c862eae61a69096caf12ef29f@changeid (cherry picked from commit 0fe76b198d482b41771a8d17b45fb726d13083cf) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-01-17usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210Juhyung Park
The commit e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") blacklists UAS for all of RTL9210 enclosures. The RTL9210 controller was advertised with UAS since its release back in 2019 and was shipped with a lot of enclosure products with different firmware combinations. Blacklist UAS only for HIKSEMI MD202. This should hopefully be replaced with more robust method than just comparing strings. But with limited information [1] provided thus far (dmesg when the device is plugged in, which includes manufacturer and product, but no lsusb -v to compare against), this is the best we can do for now. [1] https://lore.kernel.org/all/20230109115550.71688-1-qkrwngud825@gmail.com Fixes: e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Hongling Zeng <zenghongling@kylinos.cn> Cc: stable@vger.kernel.org Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20230117085154.123301-1-qkrwngud825@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17USB: gadgetfs: Fix race between mounting and unmountingAlan Stern
The syzbot fuzzer and Gerald Lee have identified a use-after-free bug in the gadgetfs driver, involving processes concurrently mounting and unmounting the gadgetfs filesystem. In particular, gadgetfs_fill_super() can race with gadgetfs_kill_sb(), causing the latter to deallocate the_device while the former is using it. The output from KASAN says, in part: BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:102 [inline] BUG: KASAN: use-after-free in atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] BUG: KASAN: use-after-free in __refcount_sub_and_test include/linux/refcount.h:272 [inline] BUG: KASAN: use-after-free in __refcount_dec_and_test include/linux/refcount.h:315 [inline] BUG: KASAN: use-after-free in refcount_dec_and_test include/linux/refcount.h:333 [inline] BUG: KASAN: use-after-free in put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] BUG: KASAN: use-after-free in gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 Write of size 4 at addr ffff8880276d7840 by task syz-executor126/18689 CPU: 0 PID: 18689 Comm: syz-executor126 Not tainted 6.1.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> ... atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 vfs_get_super fs/super.c:1190 [inline] get_tree_single+0xd0/0x160 fs/super.c:1207 vfs_get_tree+0x88/0x270 fs/super.c:1531 vfs_fsconfig_locked fs/fsopen.c:232 [inline] The simplest solution is to ensure that gadgetfs_fill_super() and gadgetfs_kill_sb() are serialized by making them both acquire a new mutex. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+33d7ad66d65044b93f16@syzkaller.appspotmail.com Reported-and-tested-by: Gerald Lee <sundaywind2004@gmail.com> Link: https://lore.kernel.org/linux-usb/CAO3qeMVzXDP-JU6v1u5Ags6Q-bb35kg3=C6d04DjzA9ffa5x1g@mail.gmail.com/ Fixes: e5d82a7360d1 ("vfs: Convert gadgetfs to use the new mount API") CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Y6XCPXBpn3tmjdCC@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17usb: cdns3: remove fetched trb from cache before dequeuingPawel Laszczak
After doorbell DMA fetches the TRB. If during dequeuing request driver changes NORMAL TRB to LINK TRB but doesn't delete it from controller cache then controller will handle cached TRB and packet can be lost. The example scenario for this issue looks like: 1. queue request - set doorbell 2. dequeue request 3. send OUT data packet from host 4. Device will accept this packet which is unexpected 5. queue new request - set doorbell 6. Device lost the expected packet. By setting DFLUSH controller clears DRDY bit and stop DMA transfer. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <stable@vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221115100039.441295-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-17block/rnbd-clt: fix wrong max ID in ida_alloc_maxGuoqing Jiang
We need to pass 'end - 1' to ida_alloc_max after switch from ida_simple_get to ida_alloc_max. Otherwise smatch warns. drivers/block/rnbd/rnbd-clt.c:1460 init_dev() error: Calling ida_alloc_max() with a 'max' argument which is a power of 2. -1 missing? Fixes: 24afc15dbe21 ("block/rnbd: Remove a useless mutex") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Acked-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20221230010926.32243-1-guoqing.jiang@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-17Merge tag 'thunderbolt-for-v6.2-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: "thunderbolt: Fixes for v6.2-rc5 This includes fixes for: - on-board retimer scan return value - runtime PM during tb_retimer_scan() - USB3 link rate calculation - XDomain lane bonding. All these have been in linux-next with no reported issues." * tag 'thunderbolt-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Disable XDomain lane 1 only in software connection manager thunderbolt: Use correct function to calculate maximum USB3 link rate thunderbolt: Do not call PM runtime functions in tb_retimer_scan() thunderbolt: Do not report errors if on-board retimers are found
2023-01-17HID: revert CHERRY_MOUSE_000C quirkJiri Kosina
This partially reverts commit f6d910a89a2391 ("HID: usbhid: Add ALWAYS_POLL quirk for some mice"), as it turns out to break reboot on some platforms for reason yet to be understood. Fixes: f6d910a89a2391 ("HID: usbhid: Add ALWAYS_POLL quirk for some mice") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-17pinctrl: rockchip: fix mux route data for rk3568Jonas Karlman
IO mux selection is configured in PMU_GRF_SOC_CON4 and GRF_IOFUNC_SEL0-5 regs on RK3568. pwm0-2 is configured in PMU_GRF reg and the rest is configured in GRF_IOFUNC regs according to TRM [1]. Update mux route data to reflect this and use proper detection pin for UART1 IO mux M1. This fixes HDMITX IO mux M1 selection and makes it possible to enable HDMI CEC on my Radxa ROCK 3 Model A v1.31 board. [1] http://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20230110084636.1141740-1-jonas@kwiboo.se Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-17drm/i915/psr: Implement Wa_14015648006Jouni Högander
Add 4th pipe and extend TGL Wa_16013835468 to support ADLP, MTL and DG2 and all TGL steppings. BSpec: 54369, 55378, 66624 v3: - commit message modified v2: - apply for PSR1 as well - remove stepping information from comments Cc: Matt Roper <matthew.d.roper@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230105065637.2063311-1-jouni.hogander@intel.com
2023-01-17drm/ttm: fix some minor kerneldoc issuesChristian König
Pointed out by the kernel test robot while merging ttm_bo_api.h and ttm_bo_driver.h. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230117123345.387078-1-christian.koenig@amd.com
2023-01-17net: stmmac: fix invalid call to mdiobus_get_phy()Heiner Kallweit
In a number of cases the driver assigns a default value of -1 to priv->plat->phy_addr. This may result in calling mdiobus_get_phy() with addr parameter being -1. Therefore check for this scenario and bail out before calling mdiobus_get_phy(). Fixes: 42e87024f727 ("net: stmmac: Fix case when PHY handle is not present") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/669f9671-ecd1-a41b-2727-7b73e3003985@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-17ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810THans de Goede
The Acer Aspire 4810T predates Windows 8, so it defaults to using acpi_video# for backlight control, but this is non functional on this model. Add a DMI quirk to use the native backlight interface which does work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-17HID: check empty report_list in bigben_probe()Pietro Borrello
Add a check for empty report_list in bigben_probe(). The missing check causes a type confusion when issuing a list_entry() on an empty report_list. The problem is caused by the assumption that the device must have valid report_list. While this will be true for all normal HID devices, a suitably malicious device can violate the assumption. Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-17HID: check empty report_list in hid_validate_values()Pietro Borrello
Add a check for empty report_list in hid_validate_values(). The missing check causes a type confusion when issuing a list_entry() on an empty report_list. The problem is caused by the assumption that the device must have valid report_list. While this will be true for all normal HID devices, a suitably malicious device can violate the assumption. Fixes: 1b15d2e5b807 ("HID: core: fix validation of report id 0") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-17net: mdio: validate parameter addr in mdiobus_get_phy()Heiner Kallweit
The caller may pass any value as addr, what may result in an out-of-bounds access to array mdio_map. One existing case is stmmac_init_phy() that may pass -1 as addr. Therefore validate addr before using it. Fixes: 7f854420fbfe ("phy: Add API for {un}registering an mdio device to a bus.") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-17net: usb: sr9700: Handle negative lenSzymon Heidrich
Packet len computed as difference of length word extracted from skb data and four may result in a negative value. In such case processing of the buffer should be interrupted rather than setting sr_skb->len to an unexpectedly large value (due to cast from signed to unsigned integer) and passing sr_skb to usbnet_skb_return. Fixes: e9da0b56fe27 ("sr9700: sanity check for packet length") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20230114182326.30479-1-szymon.heidrich@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-17drm/ttm: Include <linux/vmalloc.h> to fix MIPS buildThomas Zimmermann
On MIPS, vmap() and vunmap() are undeclared in ttm_bo_util.c. An error message is shown below. CC drivers/gpu/drm/ttm/ttm_bo_util.o ../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_kmap_ttm': ../drivers/gpu/drm/ttm/ttm_bo_util.c:364:32: error: implicit declaration of function 'vmap'; did you mean 'kmap'? [-Werror=implicit-function-declaration] 364 | map->virtual = vmap(ttm->pages + start_page, num_pages, | ^~~~ | kmap ../drivers/gpu/drm/ttm/ttm_bo_util.c:364:30: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 364 | map->virtual = vmap(ttm->pages + start_page, num_pages, | ^ ../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_kunmap': ../drivers/gpu/drm/ttm/ttm_bo_util.c:429:17: error: implicit declaration of function 'vunmap'; did you mean 'kunmap'? [-Werror=implicit-function-declaration] 429 | vunmap(map->virtual); | ^~~~~~ | kunmap ../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_vmap': ../drivers/gpu/drm/ttm/ttm_bo_util.c:509:23: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 509 | vaddr = vmap(ttm->pages, ttm->num_pages, 0, prot); | ^ Fix this by including <linux/vmalloc.h>. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230116121023.14245-1-tzimmermann@suse.de
2023-01-17Merge tag 'drm-intel-next-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull #1 for v6.3: Features and functionality: - Meteorlake display enabling (Animesh, Luca, Stan, Jouni, Anusha) - DP MST DSC support (Stan) - Gamma/degamma readout support for the state checker (Ville) - Enable SDP split support for DP 2.0 (Vinod) - Add probe blocking support to i915.force_probe parameter (Rodrigo) - Enable Xe HP 4tile support (Jonathan) Refactoring and cleanups: - Color refactoring, especially related to DSB usage (Ville) - DSB refactoring (Ville) - DVO refactoring (Ville) - Backlight register and logging cleanups (Jani) - Avoid display direct calls to uncore (Maarten, Jani) - Add new "soc" sub-directory (Jani) - Refactor DSC platform support checks (Swati) Fixes: - Interlace modes are no longer supported starting at display version 12 (Ankit) - Use polling read for aux control (Arun) - DMC firmware no longer requires specific versions (Gustavo) - Fix PSR flickering and freeze issues (Jouni) - Fix ICL+ DSI GPIO handling (Jani) - Ratelimit errors in display engine irqs (Lucas) - Fix DP MST DSC bpp and timeslot calculations (Stan) - Fix CDCLK squash and crawl sequences (Ville, Anusha) - Fix bigjoiner checks for fused pipes (Ville) - Fix ADP+ degamma LUT size (Ville) - Fix DVO ch7xxx and sil164 suspend/resume (Ville) - Fix memory leak in VBT parsing (Xia Fukun) - Fix VBT packet port selection for dual link DSI (Mikko Kovanen) - Fix SDP infoframe product string for discrete graphics (Clint) - Fix VLV/CHV HDMI/DP audio enable (Ville) - Fix VRR delays and calculations (Ville) - No longer disable transcoder for PHY test pattern change (Khaled) - Fix dual PPS handling (Ville) - Fix timeout and wait for DDI BUF CTL active after enabling (Ankit) Merges: - Backmerge drm-next to sync up with v6.2-rc1 (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87tu0wez34.fsf@intel.com
2023-01-16drm/nouveau/fb/ga102: Replace zero-length array of trailing structs with ↵Kees Cook
flex-array Zero-length arrays are deprecated[1] and are being replaced with flexible array members in support of the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3. Replace zero-length array with flexible-array member. This results in no differences in binary output. [1] https://github.com/KSPP/linux/issues/78 Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gourav Samaiya <gsamaiya@nvidia.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103234835.never.378-kees@kernel.org
2023-01-16pktcdvd: check for NULL returna fter calling bio_split_to_limits()Jens Axboe
The revert of the removal of this driver happened after we fixed up the split limits for NOWAIT issue, hence it got missed. Ensure that we check for a NULL bio after splitting, in case it should be retried. Marking this as fixing both commits, so that stable backport will do this correctly. Cc: stable@vger.kernel.org Fixes: 9cea62b2cbab ("block: don't allow splitting of a REQ_NOWAIT bio") Fixes: 4b83e99ee709 ("Revert "pktcdvd: remove driver."") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-16tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()John Ogness
Several mutexes are taken while setting up console serial ports. In particular, the tty_port->mutex and @console_mutex are taken: serial_pnp_probe serial8250_register_8250_port uart_add_one_port (locks tty_port->mutex) uart_configure_port register_console (locks @console_mutex) In order to synchronize kgdb's tty_find_polling_driver() with register_console(), commit 6193bc90849a ("tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()") takes the @console_mutex. However, this leads to the following call chain (with locking): platform_probe kgdboc_probe configure_kgdboc (locks @console_mutex) tty_find_polling_driver uart_poll_init (locks tty_port->mutex) uart_set_options This is clearly deadlock potential due to the reverse lock ordering. Since uart_set_options() requires holding @console_mutex in order to serialize early initialization of the serial-console lock, take the @console_mutex in uart_poll_init() instead of configure_kgdboc(). Since configure_kgdboc() was using @console_mutex for safe traversal of the console list, change it to use the SRCU iterator instead. Add comments to uart_set_options() kerneldoc mentioning that it requires holding @console_mutex (aka the console_list_lock). Fixes: 6193bc90849a ("tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()") Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> [pmladek@suse.com: Export console_srcu_read_lock_is_held() to fix build kgdboc as a module.] Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20230112161213.1434854-1-john.ogness@linutronix.de
2023-01-16wifi: mt76: dma: fix a regression in adding rx buffersFelix Fietkau
When adding WED support, mt76_dma_add_buf was accidentally changed to set the skip_buf0 flag for tx buffers on the wrong queue descriptor entry. Additionally, there is a rxwi leak when rx buffer allocation fails. Fix this and make the code more readable by adding a separate function for adding rx buffers. Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/r/CABXGCsMEnQd=gYKTd1knRsWuxCb=Etv5nAre%2BXJS_s5FgVteYA@mail.gmail.com/ Reported-by: Mike Lothian <mike@fireburn.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216829 Reported-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/lkml/20230112171706.294550-1-angelogioacchino.delregno@collabora.com/ Fixes: cd372b8c99c5 ("wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230113105848.34642-3-nbd@nbd.name
2023-01-16wifi: mt76: handle possible mt76_rx_token_consume failuresLorenzo Bianconi
Take into account possible error conditions of mt76_rx_token_consume routine in mt7915_mmio_wed_init_rx_buf() and mt76_dma_add_buf() Fixes: cd372b8c99c5 ("wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf") Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit 96f134dc19645be4994e89a2f68fa89309becbee) Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230113105848.34642-2-nbd@nbd.name
2023-01-16wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf failsLorenzo Bianconi
Do not increment queue head if mt76_dma_add_buf fails for Wireless Ethernet Dispatcher rx queues. Fixes: cd372b8c99c5 ("wifi: mt76: add WED RX support to mt76_dma_{add,get}_buf") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry picked from commit fe13dad8992be0b26c1be390bcd111acf9892c17) Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230113105848.34642-1-nbd@nbd.name
generated by cgit (git 2.34.1) at 2025-09-15 10:46:55 +0000