| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
enable dpp rcg before we disable dppclk in hw_init cause system
hang/reboot
[How]
we remove dccg rcg related code from init into a separate function and
call it after we init pipe
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Function used to check the number of FEs connected to the current BE.
This was then used to determine if the symclk could be disabled, if
all FEs were disconnected. However, the function would skip over the
primary FE and return 0 when the primary FE was still connected. This
caused black screens on driver disable with an MST daisy chain hooked
up.
[How]
Refactor the function to correctly return the number of FEs connected
to the input BE. Also, rename it for clarity.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On VFs and SOCs with GC 9.4.4, VCN RRMT is disabled.
Only local register offsets should be used on JPEG v4.0.3 as they cannot
handle remote access to other AIDs. Since only local offsets are used,
the special write to MCM_ADDR register is no longer needed.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When it needs to get a value within a certain interval, using clamp()
makes the code easier to understand than min(max()).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When it needs to get a value within a certain interval, using clamp()
makes the code easier to understand than min(max()).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enabling gfxoff quirk results in perfectly usable
graphical user interface on HP 705G4 DM with R5 2400G.
Without the quirk, X server is completely unusable as
every few seconds there is gpu reset due to ring gfx timeout.
Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix screen corruption with openkylin.
Link: https://bbs.openkylin.top/t/topic/171497
Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a spelling mistake in a DRM_DEBUG_DRIVER message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Populate cache line size info in topology based on information from IP
discovery table.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dpp401_dscl_program_isharp
This commit addresses a missing kdoc for the 'bs_coeffs_updated'
parameter in the 'dpp401_dscl_program_isharp' function. The
'bs_coeffs_updated' is a flag indicating whether the Blur and Scale
Coefficients have been updated.
The 'dpp401_dscl_program_isharp' function is responsible for programming
the isharp, which includes setting the isharp filter, noise gain, and
blur and scale coefficients. If the 'bs_coeffs_updated' flag is set to
true, the function updates the blur and scale coefficients.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
CPU based update doesn't produce a fence, handle such cases properly.
Fixes: d8a3f0a0348d ("drm/amdgpu: implement TLB flush fence")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rework how VM operations synchronize to submissions. Provide an
amdgpu_sync container to the backends instead of an reservation
object and fill in the amdgpu_sync object in the higher layers
of the code.
No intended functional change, just prepares for upcomming changes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Friedrich Vock <friedrich.vock@gmx.de>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The AXP717 also contains an adjustable boost regulator, to provide the
5V USB VBUS rail when running on battery.
Add the regulator description that states the voltage range this
regulator can cover.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20240816001824.6028-4-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The AXP717 also contains a boost regulator, to provide the 5V USB VBUS
rail when running on battery.
Add the registers to the MFD description to be able to use them from the
regulator driver.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20240816001824.6028-3-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.12/block
Pull MD updates from Song:
"This patch, by Xiao Ni, adds a sysfs entry 'new_level'."
* tag 'md-6.12-20240906' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: Add new_level sysfs interface
|
|
for-6.12/block
Pull NVMe updates from Keith:
"nvme updates for Linux 6.12
- Asynchronous namespace scanning (Stuart)
- TCP TLS updates (Hannes)
- RDMA queue controller validation (Niklas)
- Align field names to the spec (Anuj)
- Metadata support validation (Puranjay)"
* tag 'nvme-6.12-2024-09-06' of git://git.infradead.org/nvme:
nvme: fix metadata handling in nvme-passthrough
nvme: rename apptag and appmask to lbat and lbatm
nvme-rdma: send cntlid in the RDMA_CM_REQUEST Private Data
nvme-target: do not check authentication status for admin commands twice
nvmet-auth: allow to clear DH-HMAC-CHAP keys
nvme-sysfs: add 'tls_keyring' attribute
nvme-sysfs: add 'tls_configured_key' sysfs attribute
nvme: split off TLS sysfs attributes into a separate group
nvme: add a newline to the 'tls_key' sysfs attribute
nvme-tcp: check for invalidated or revoked key
nvme-tcp: sanitize TLS key handling
nvme-keyring: restrict match length for version '1' identifiers
nvme_core: scan namespaces asynchronously
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix an incorrect warning emitted by the amd-pstate driver on
processors that don't support X86_FEATURE_CPPC (Gautham Shenoy)"
* tag 'pm-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Remove warning for X86_FEATURE_CPPC on certain Zen models
|
|
Pull block fixes from Jens Axboe:
"Mostly just some fixlets for NVMe, but also a bug fix for the ublk
driver and an integrity fix"
* tag 'block-6.11-20240906' of git://git.kernel.dk/linux:
bio-integrity: don't restrict the size of integrity metadata
ublk_drv: fix NULL pointer dereference in ublk_ctrl_start_recovery()
nvmet: Identify-Active Namespace ID List command should reject invalid nsid
nvme: set BLK_FEAT_ZONED for ZNS multipath disks
nvme-pci: Add sleep quirk for Samsung 990 Evo
nvme-pci: allocate tagset on reset if necessary
nvmet-tcp: fix kernel crash if commands allocation fails
nvme: use better description for async reset reason
nvmet: Make nvmet_debugfs static
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP Updates for 6.12 from Viresh Kumar:
"- Update maintainers for operating-points-v2-ti-cpu file (Dhruva Gole).
- Drop unnecessary of_match_ptr() for TI driver (Rob Herring)."
* tag 'opp-updates-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: operating-points-v2-ti-cpu: Update maintainers
opp: ti: Drop unnecessary of_match_ptr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Apply SD quirks earlier during probe so they become relevant
MMC host:
- cqhci: Fix checking of CQHCI_HALT state
- dw_mmc: Fix IDMAC operation with pages bigger than 4K
- sdhci-of-aspeed: Fix module autoloading"
* tag 'mmc-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: cqhci: Fix checking of CQHCI_HALT state
mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K
mmc: sdhci-of-aspeed: fix module autoloading
mmc: core: apply SD quirks earlier during probe
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.12 from Viresh Kumar:
"- Several OF related cleanups in cpufreq drivers (Rob Herring).
- Enable COMPILE_TEST for ARM drivers (Rob Herrring).
- Introduce quirks for syscon failures and use socinfo to get revision
for TI cpufreq driver (Dhruva Gole and Nishanth Menon).
- Minor cleanups in amd-pstate driver (Anastasia Belova and Dhananjay
Ugwekar).
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)."
* tag 'cpufreq-arm-updates-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family
cpufreq: Fix the cacography in powernv-cpufreq.c
cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
cpufreq: Add SM7325 to cpufreq-dt-platdev blocklist
cpufreq: Fix warning on unused of_device_id tables for !CONFIG_OF
cpufreq/amd-pstate: Add the missing cpufreq_cpu_put()
cpufreq: Drop CONFIG_ARM and CONFIG_ARM64 dependency on Arm drivers
cpufreq: Enable COMPILE_TEST on Arm drivers
cpufreq: armada-8k: Avoid excessive stack usage
cpufreq: omap: Drop asm includes
cpufreq: qcom: Add explicit io.h include for readl/writel_relaxed
cpufreq: spear: Use of_property_for_each_u32() instead of open coding
cpufreq: Use of_property_present()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an OF node reference leak in gpio-rockchip
- add the missing module device table to gpio-modepin
* tag 'gpio-fixes-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: modepin: Enable module autoloading
gpio: rockchip: fix OF node leak in probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Fix support for required OPPs for multiple PM domains
* tag 'pmdomain-v6.11-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
OPP: Fix support for required OPPs for multiple PM domains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix an off-by-one in the stm32 driver.
Hardware engineers tend to start counting at 1 while the software guys
usually start with 0. This isn't so nice because that results in
drivers where pwm device #2 needs to use the hardware registers with
index 3.
This was noticed by Fabrice Gasnier.
A small patch fixing that mismatch is the only change included here"
* tag 'pwm/for-6.11-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Use the right CCxNP bit in stm32_pwm_enable()
|
|
Pull drm fixes from Dave Airlie:
"This has a fair few patches in it, but I reviewed them all and they
seem like real things, amdgpu, i915 and xe each have a bunch of fixes
for various things, then there is a some bridge suspend/resume
ordering fixes for a recent rework, and then some single driver
changes in a few others.
Nothing looks too serious, hopefully next week is quiet.
amdgpu:
- IPS workaround
- Fix compatibility with older MES firmware
- Fix CPU spikes when clearing VRAM
- Backlight fix
- PMO fix
- Revert SWSMU change to fix regression
xe:
- GSC loading fix
- PCODE mutex fix
- Suspend/Resume fixes
- RPM fixes
i915:
- Do not attempt to load the GSC multiple times
- Fix readout degamma_lut mismatch on ilk/snb
- Mark debug_fence_init_onstack() with __maybe_unused
- fence: Mark debug_fence_free() with __maybe_unused
- display: Add mechanism to use sink model when applying quirk
- display: Increase Fast Wake Sync length as a quirk
komeda:
- zpos normalization fix
nouveau:
- incorrect register fix
imagination:
- memory leak fix
bridge:
- hdmi/bridge rework fixes
panthor:
- cache coherency fix
- hi priority access fix
panel:
- change of compatible string
fbdev:
- deferred-io init with no struct page fix"
* tag 'drm-fixes-2024-09-06' of https://gitlab.freedesktop.org/drm/kernel: (29 commits)
Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"
drm/fbdev-dma: Only install deferred I/O if necessary
drm/panthor: flush FW AS caches in slow reset path
drm: panel: nv3052c: Correct WL-355608-A8 panel compatible
dt-bindings: display: panel: Rename WL-355608-A8 panel to rg35xx-*-panel
drm/panthor: Restrict high priorities on group_create
drm/xe/display: Avoid encoder_suspend at runtime suspend
drm/xe: Suspend/resume user access only during system s/r
drm/xe/display: Match i915 driver suspend/resume sequences better
drm/xe: Add missing runtime reference to wedged upon gt_reset
drm/xe/pcode: Treat pcode as per-tile rather than per-GT
drm/xe/gsc: Do not attempt to load the GSC multiple times
drm/bridge-connector: reset the HDMI connector state
drm/bridge-connector: move to DRM_DISPLAY_HELPER module
drm/display: stop depending on DRM_DISPLAY_HELPER
drm/i915/display: Increase Fast Wake Sync length as a quirk
drm/i915/display: Add mechanism to use sink model when applying quirk
drm/amd/display: Block timing sync for different signals in PMO
drm/amd/display: Lock DC and exit IPS when changing backlight
drm/amdgpu: always allocate cleared VRAM for GEM allocations
...
|
|
Use previously implemented SF aux driver. It is probe during SF
activation and remove after deactivation.
Implement set/get hw_address and set/get state as basic devlink ops for
subfunction.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement add / delete vlan for subfunction type VSI.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Flow for creating Tx topology is the same as for VF port representors,
but the devlink port is stored in different place (sf->devlink_port).
When creating VF devlink lock isn't taken, when creating subfunction it
is. Setting Tx topology function needs to take this lock, check if it
was taken before to not do it twice.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Subfunction port representor needs the basic netdevice ops to work
correctly. Create them.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Now there is another type of port representor. Correct checking if
parent device is ready to reflect also new PR type.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add check for subfunction before setting target VSI. It is needed for PF
in switchdev mode but not for subfunction (even in switchdev mode).
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement attaching and detaching SF port representor. It is done in the
same way as the VF port representor.
SF port representor is always added or removed with devlink
lock taken.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Keep the same flow of port representor creation, but instead of general
attach function create helpers for specific representor type.
Store function pointer for add and remove representor.
Type of port representor can be also known based on VSI type, but it
is more clean to have it directly saved in port representor structure.
Add devlink lock for whole port representor creation and destruction.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Configure netdevice for subfunction usecase. Mostly it is reusing ops
from the PF netdevice.
SF netdev is linked to devlink port registered after SF activation.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement subfunction driver. It is probe when subfunction port is
activated.
VSI is already created. During the probe VSI is being configured.
MAC unicast and broadcast filter is added to allow traffic to pass.
Store subfunction pointer in VSI struct. The same is done for VF
pointer. Make union of subfunction and VF pointer as only one of them
can be set with one VSI.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Allocate devlink for subfunction instance.
Create header file for subfunction device. Define subfunction device
structure there as it is needed for devlink allocation.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When subfunction VSI is open the same code as for PF VSI should be
executed. Also when up is complete. Reflect that in code by adding
subfunction VSI to consideration.
In case of stopping, PF doesn't have additional tasks, so the same
is with subfunction VSI.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement devlink port handlers responsible for ethernet type devlink
subfunctions. Create subfunction devlink port and setup all resources
needed for a subfunction netdev to operate. Configure new VSI for each
new subfunction, initialize and configure interrupts and Tx/Rx resources.
Set correct MAC filters and create new netdev.
For now, subfunction is limited to only one Tx/Rx queue pair.
Only allocate new subfunction VSI with devlink port new command.
Allocate and free subfunction MSIX interrupt vectors using new API
calls with pci_msix_alloc_irq_at and pci_msix_free_irq.
Support both automatic and manual subfunction numbers. If no subfunction
number is provided, use xa_alloc to pick a number automatically. This
will find the first free index and use that as the number. This reduces
burden on users in the simple case where a specific number is not
required. It may also be slightly faster to check that a number exists
since xarray lookup should be faster than a linear scan of the dyn_ports
xarray.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Make some of the netdevice_ops functions visible from outside for
another VSI type created netdev.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add required plumbing for new VSI type dedicated to devlink subfunctions.
Make sure that the vsi is properly configured and destroyed. Also allow
loading XDP and AF_XDP sockets.
The first implementation of devlink subfunctions supports only one Tx/Rx
queue pair per given subfunction.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Now reshape supports two ways: with backup file or without backup file.
For the situation without backup file, it needs to change data offset.
It doesn't need systemd service mdadm-grow-continue. So it can finish
the reshape job in one process environment. It can know the new level
from mdadm --grow command and can change to new level after reshape
finishes.
For the situation with backup file, it needs systemd service
mdadm-grow-continue to monitor reshape progress. So there are two process
envolved. One is mdadm --grow command whick kicks off reshape and wakes
up mdadm-grow-continue service. The second process is the service, which
doesn't know the new level from the first process.
In kernel space mddev->new_level is used to record the new level when
doing reshape. This patch adds a new interface to help mdadm update
new_level and sync it to metadata. Then mdadm-grow-continue can read the
right new_level.
Commit log revised by Song Liu. Please refer to the link for more details.
Signed-off-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20240904235453.99120-1-xni@redhat.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
i2c_device_id::driver_data to 0
This driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240725160909.326143-2-u.kleine-koenig@baylibre.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240906141135.72080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.12
This pull request contains the interconnect changes for the 6.12-rc1 merge
window. It contains new drivers and fixes with the following highlights:
Driver changes:
- New driver for MSM8976 platforms
- New driver for MSM8937 platforms
- Enable sync_state for SM8250 platforms
- Enable QoS support for QCS404
- Add ab_coeff bandwidth adjustments for MSM8953
- Drop the unsupported yet DISP nodes on SM8350 platforms
- Fix missed num_nodes initialization in icc-clk driver
- Misc DT and documentation fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom: Do not require reg for sc8180x virt NoCs
dt-bindings: interconnect: qcom-bwmon: Document SA8775p bwmon compatibles
dt-bindings: interconnect: qcom: msm8953: Fix 'See also' in description
interconnect: qcom: msm8953: Add ab_coeff
dt-bindings: interconnect: qcom: msm8939: Fix example
interconnect: qcom: qcs404: Add regmaps and more bus descriptions
interconnect: qcom: qcs404: Mark AP-owned nodes as such
interconnect: qcom: Add MSM8937 interconnect provider driver
interconnect: qcom: sm8250: Enable sync_state
dt-bindings: interconnect: qcom,sm8350: drop DISP nodes
interconnect: qcom: sm8350: drop DISP nodes
dt-bindings: interconnect: qcom: Add Qualcomm MSM8937 NoC
interconnect: qcom: Add MSM8976 interconnect provider driver
dt-bindings: interconnect: qcom: Add Qualcomm MSM8976 NoC
interconnect: icc-clk: Add missed num_nodes initialization
dt-bindings: interconnect: qcom,rpmh: correct sm8150 camnoc
|
|
The PCIe SSD Status LED Management _DSM defined in PCI Firmware Spec r3.3
sec 4.7 provides a way to manage LEDs via ACPI.
The design is similar to NPEM defined in PCIe Base Specification r6.1 sec
6.28:
- Both standards are indication oriented,
- _DSM supported bits correspond to NPEM capability register bits,
- _DSM control bits correspond to NPEM control register bits.
_DSM does not support enclosure-specific indications or the special NPEM
commands NPEM_ENABLE and NPEM_RESET.
_DSM is implemented as a second backend in NPEM driver. The backend used is
logged with info priority. The same sysfs interface is used for both NPEM
and _DSM.
According to spec, _DSM has higher priority, and availability of _DSM in
not limited to devices with NPEM support.
The Dell implementation of DSM uses acpi ipmi, which may not be available
immediately (in fact it may take up to 10s for this interface to be
available). It can determine if DSM is supported (GET_SUPPORTED_STATES_DSM
is working) but it cannot serve GET_STATE_DSM or SET_STATE_DSM commands in
this time.
From userspace application perspective (primarily configured by systemd
service) it is better to have not working but configured interface rather
than have it available after few seconds.
For that reason, npem->active_indications cache is now loaded lazily, i.e.
any GET or SET request want cache to be updated if it is not done yet.
Link: https://lore.kernel.org/r/20240904104848.23480-4-mariusz.tkaczyk@linux.intel.com
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Based on the I3C TCRI specification, the rules for determining the I3C
mode are as follows:
I3C SCL rate > 8MHz: use SDR0, as SDR1 has a maximum data rate of 8MHz
I3C SCL rate > 6MHz: use SDR1, as SDR2 has a maximum data rate of 6MHz
I3C SCL rate > 4MHz: use SDR2, as SDR3 has a maximum data rate of 4MHz
I3C SCL rate > 2MHz: use SDR3, as SDR4 has a maximum data rate of 2MHz
Otherwise, use SDR4
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20240826033821.175591-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add the device id for the Macrosilicon MS3020 which is a
PL2303HXN based device.
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.
Fixes: acfe63ec1c59 ("mtd: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240828092427.128177-1-hanchunchao@inspur.com
|
