summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-01-05Merge remote-tracking branch 'regmap/topic/core' into regmap-nextMark Brown
2016-01-05Merge remote-tracking branch 'regmap/topic/cache' into regmap-nextMark Brown
2016-01-05spi: loopback-test: rename method spi_test_fill_tx to spi_test_fill_patternMartin Sperl
Rename method spi_test_fill_tx to spi_test_fill_pattern to better describe what it does. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05spi: loopback-test: write rx pattern also when running without tx_bufMartin Sperl
Currently the rx_buf does not get set with the SPI_TEST_PATTERN_UNWRITTEN when tx_buf == NULL in the transfer. Reorder code so that it gets done also under this specific condition. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05regmap: debugfs: Use seq_file for the access mapMark Brown
Unlike the registers file we don't have any substantial performance concerns rendering the entire file (it involves no device accesses) so just use seq_printf() to simplify the code. Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05PCI: designware: Ensure ATU is enabled before IO/conf space accessesStanimir Varbanov
Read back the ATU CR2 register to ensure ATU programming is effective before any subsequent I/O or config space accesses. Without this, PCI device enumeration is unreliable. [bhelgaas: changelog, comment] Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
2016-01-05regmap: irq: add support for configuration of trigger typeLaxman Dewangan
Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05mmc: dw_mmc: remove the unused quirksJaehoon Chung
Removed the unused quirks. These quirks don't used anywhere. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-05mmc: sdhci-pci: use to_pci_dev()Geliang Tang
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-05mmc: cb710: use to_platform_device()Geliang Tang
Use to_platform_device() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-05mmc: tegra: use correct accessor for misc ctrl registerLucas Stach
The misc control register is 32bit wide, the used readw/writew accessors only mainipulate the low 16bit of this register. It currently doesn't matter as all the bit changed are located in the lower half, but together with the u32 variable used to hold the contents of the register it is seriously confusing. Switch to 32bit accessors to avoid any future breakage. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-05mmc: tegra: enable UHS-I modesLucas Stach
Keep the quirk bits, as Tegra30 and Tegra114 host have different levels of support for UHS-I modes and so need different spare bits to be set, but change the logic to be positive. Tegra210 needs a different tuning sequence than Tegra30+. Disable UHS modes until support for this is properly added. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-05spi: fsl-espi: expose maximum transfer size limitMichal Suchanek
The fsl-espi hardware can trasfer at most 64K data so report teh limitation. Based on patch by Heiner Kallweit <hkallweit1@gmail.com> CC: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05drm: Remove opencoded drm_gem_object_release_handle()Chris Wilson
drm_gem_handle_delete() contains its own version of drm_gem_object_release_handle(), so lets just call the release method instead. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451986951-3703-2-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05drm: Do not set outparam on error during GEM handle allocationChris Wilson
Good practice dictates that we do not leak stale information to our callers, and should avoid overwriting an outparam on an error path. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451986951-3703-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05of/platform: export of_default_bus_match_tableMasahiro Yamada
Currently, drivers/bus/uniphier-system-bus.c is kept from being a module due to the unresolved reference to of_default_bus_match_table. Refer to commit 326ea45aa827 ("bus: uniphier: allow only built-in driver"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-01-05of/unittest: Show broken behaviour in the platform busGrant Likely
Add a single resource to the test bus device to exercise the platform bus code a little more. This isn't strictly a devicetree test, but it is a corner case that the devicetree runs into. Until we've got platform device unittests, it can live here. It doesn't need to be an explicit text because the kernel will oops when it is wrong. Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Rob Herring <robh@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> [wsa: added the comment provided by Grant, rebased, and tested] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-01-05gpio: pch: Optimize pch_gpio_get()Jean Delvare
The double negation is costly and can be avoided by shifting the register value before masking the requested bit. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05regulator: core: use dev_to_rdevGeliang Tang
Use dev_to_rdev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-05Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"Linus Walleij
This reverts commit 3e640743fee6e6a82ead1f163737755b2a965712. This commit needs to go into the pinctrl tree to avoid clashes.
2016-01-05pinctrl: nsp-gpio: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Yendapally Reddy Dhananjaya Reddy <yrdreddy@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: vt8500-wmt: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: exynos5440: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Kukjin Kim <kgene@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: at91-pio4: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: mediatek: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: spear-plgpio: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: spear-devel@list.st.com Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: sirf: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Barry Song <baohua@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: sirf-atlas7: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Barry Song <baohua@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: sh-pfc: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: sunxi: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: samsung: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: ssbi-gpio: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: ssbi-mpp: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: spmi-mpp: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: spmi: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: msm: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: st: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: rockchip: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: pistachio: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: digicolor: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: u300: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: at91: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: as3722: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Mallikarjun Kasoju <mkasoju@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: amd: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: adi2: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: abx500: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: nomadik: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: meson: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Carlo Caione <carlo@endlessm.com> Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: intel: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: cherryview: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-23 08:44:34 +0000