summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-03net/mlx5: convert to new udp_tunnel infrastructureJakub Kicinski
Allocate nic_info dynamically - n_entries is not constant. Attach the tunnel offload info only to the uplink representor. We expect the "main" netdev to be unregistered in switchdev mode, and there to be only one uplink representor. Drop the udp_tunnel_drop_rx_info() call, it was not there until commit b3c2ed21c0bd ("net/mlx5e: Fix VXLAN configuration restore after function reload") so the device doesn't need it, and core should handle reloads and reset just fine. v2: - don't drop the ndos on reprs, and register info on uplink repr. v4: - Move netdev tunnel structure handling to en_main.c Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-08-03net/mlx5: DR, Change push vlan action sequenceAlex Vesker
The DR TX state machine supports the following order: modify header, push vlan and encapsulation. Instead fs_dr would pass: push vlan, modify header and encapsulation. The above caused the rule creation to fail on invalid action sequence provided error. Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-08-03net/mlx5e: Enable users to change VF/PF representors carrier stateParav Pandit
Currently PF and VF representor netdevice carrier is always controlled by controlling the representor netdevice device state as up/down. Representor netdevice state change undergoes one or more txq/rxq destroy/create commands to firmware, skb and its rx buffer allocation, health reporters creation and more. Due to this limitation users do not have the ability to just change the carrier of the non uplink representors without modifying the device state. In one use case when the eswitch physical port carrier is down/up, user needs to update the VF link state to same as physical port carrier. Example of updating VF representor carrier state: $ ip link set enp0s8f0npf0vf0 carrier off $ ip link set enp0s8f0npf0vf0 carrier on This enhancement results into VF link state change which is represented by the VF representor netdevice carrier. This enables users to modify the representor carrier without modifying the representor netdevice state. A simple test is run using [1] to calculate the time difference between updating carrier vs updating device state (to update just the carrier) with one VF to simulate 255 VFs. Time taken to update the carrier using device up/down: $ time ./calculate.sh dev enp0s8f0npf0vf0 real 0m30.913s user 0m0.200s sys 0m11.168s Time taken to update just the carrier using carrier iproute2 command: $ time ./calculate.sh carrier enp0s8f0npf0vf0 real 0m2.142s user 0m0.160s sys 0m2.021s Test shows that its better to use carrier on/off user interface to notify link up/down event to VF compare to device up/down interface, because carrier user interface delivers the same event 15 times faster. [1] https://github.com/paravmellanox/myscripts/blob/master/calculate_carrier_time.sh Signed-off-by: Parav Pandit <parav@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-08-03Merge tag 'tpmdd-next-v5.9' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm updates from Jarkko Sakkinen: "An issue was fixed with the TPM space buffer size. The buffer is used to store in-TPM objects while swapped out of the TPM for a /dev/tpmrm0 session. The code incorrectly used PAGE_SIZE, which obviously can vary. With these changes the buffer has a fixed size of 16 kB. In addition, this contains support for acquiring TPM even log from TPM2 ACPI table. This method is used by QEMU in particular" * tag 'tpmdd-next-v5.9' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: Add support for event log pointer found in TPM2 ACPI table acpi: Extend TPM2 ACPI table with missing log fields tpm: Unify the mismatching TPM space buffer sizes tpm: Require that all digests are present in TCG_PCR_EVENT2 structures
2020-08-03PCI: Remove dev_err() when handing an error from platform_get_irq()Krzysztof Wilczyński
There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. This change is as per suggestions from Coccinelle, e.g., drivers/pci/controller/dwc/pcie-armada8k.c:252:2-9: line 252 is redundant because platform_get_irq() already prints an error [bhelgaas: squashed into one commit] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20200802142601.1635926-2-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-3-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-4-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-5-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-6-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-7-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-8-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-9-kw@linux.com Link: https://lore.kernel.org/r/20200802142601.1635926-10-kw@linux.com Link: https://lore.kernel.org/r/20200803071040.1663662-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> # altera Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # dwc
2020-08-03misc: pci_endpoint_test: Add J721E in pci_device_id tableKishon Vijay Abraham I
Add J721E in pci_device_id table so that pci-epf-test can be used for testing PCIe EP in J721E. Link: https://lore.kernel.org/r/20200722110317.4744-15-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-08-03PCI: j721e: Add TI J721E PCIe driverKishon Vijay Abraham I
Add support for PCIe controller in J721E SoC. The controller uses the Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller will work in both host mode and device mode. Some of the features of the controller are: *) Supports both RC mode and EP mode *) Supports MSI and MSI-X support *) Supports upto GEN3 speed mode *) Supports SR-IOV capability *) Ability to route all transactions via SMMU (support will be added in a later patch). Link: https://lore.kernel.org/r/20200722110317.4744-14-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-08-03Merge tag 'irqchip-5.9' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Add infrastructure to allow DT irqchip platform drivers to be built as modules - Allow qcom-pdc, mtk-cirq and mtk-sysirq to be built as module - Fix ACPI probing to avoid abusing function pointer casting - Allow bcm7120-l2 and brcmstb-l2 to be used as wake-up sources - Teach NXP's IMX INTMUX some power management - Allow stm32-exti to be used as a hierarchical irqchip - Let stm32-exti use the hw spinlock API in its full glory - A couple of GICv4.1 fixes - Tons of cleanups (mtk-sysirq, aic5, bcm7038-l1, imx-intmux, brcmstb-l2, ativic32, ti-sci-inta, lonsoon, MIPS GIC, GICv3)
2020-08-03leds: disallow /sys/class/leds/*:multi:* for nowPavel Machek
All the LEDs in the queue are RGB, so they should not use multi for their color. Make sure we don't add such LED by mistake (and make it part of ABI). Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-08-03leds: add RGB color option, as that is different from multicolor.Pavel Machek
Multicolor is a bit too abstract. Yes, we can have Green-Magenta-Ultraviolet LED, but so far all the LEDs we support are RGB, and not even RGB-White or RGB-Yellow variants emerged. Multicolor is not a good fit for RGB LED. It does not really know about LED color. In particular, there's no way to make LED "white". Userspace is interested in knowing "this LED can produce arbitrary color", which not all multicolor LEDs can. Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-08-03Merge branches 'acpi-mm', 'acpi-tables', 'acpi-apei' and 'acpi-misc'Rafael J. Wysocki
* acpi-mm: ACPI: OSL: Clean up the removal of unused memory mappings ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem() ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address() ACPICA: Preserve memory opregion mappings ACPI: OSL: Implement deferred unmapping of ACPI memory * acpi-tables: ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check ACPI: NUMA: Remove the useless sub table pointer check ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array() ACPI: tables: avoid relocations for table signature array * acpi-apei: ACPI: APEI: remove redundant assignment to variable rc * acpi-misc: ACPI: Replace HTTP links with HTTPS ones ACPI: Use valid link to the ACPI specification ACPI: Use fallthrough pseudo-keyword
2020-08-03Merge branches 'acpi-proc', 'acpi-sysfs', 'acpi-pad', 'acpi-ec', 'acpi-pci' ↵Rafael J. Wysocki
and 'acpi-prop' * acpi-proc: ACPI: procfs: Remove last dirs after being marked deprecated for a decade * acpi-sysfs: ACPI: sysfs: add newlines when printing module parameters * acpi-pad: ACPI: PAD: Eliminate usage of uninitialized_var() macro * acpi-ec: ACPI: EC: add newline when printing 'ec_event_clearing' module parameter * acpi-pci: PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context() * acpi-prop: ACPI: property: use cached name in acpi_fwnode_get_named_child_node()
2020-08-03Merge branches 'pm-sleep', 'pm-domains', 'powercap' and 'pm-tools'Rafael J. Wysocki
* pm-sleep: PM: sleep: spread "const char *" correctness PM: hibernate: fix white space in a few places freezer: Add unsafe version of freezable_schedule_timeout_interruptible() for NFS PM: sleep: core: Emit changed uevent on wakeup_sysfs_add/remove * pm-domains: PM: domains: Restore comment indentation for generic_pm_domain.child_links PM: domains: Fix up terminology with parent/child * powercap: powercap: Add Power Limit4 support powercap: idle_inject: Replace play_idle() with play_idle_precise() in comments powercap: intel_rapl: add support for Sapphire Rapids * pm-tools: pm-graph v5.7 - important s2idle fixes cpupower: Replace HTTP links with HTTPS ones cpupower: Fix NULL but dereferenced coccicheck errors cpupower: Fix comparing pointer to 0 coccicheck warns
2020-08-03Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (24 commits) cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode cpufreq: intel_pstate: Rearrange the storing of new EPP values cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported cpufreq: intel_pstate: Clean up aperf_mperf_shift description cpufreq: powernv: Make some symbols static cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift() cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues cpufreq: pasemi: Include header file for {check,restore}_astate prototypes cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks cpufreq: Replace HTTP links with HTTPS ones cpufreq: intel_pstate: Fix static checker warning for epp variable cpufreq: Remove the weakly defined cpufreq_default_governor() cpufreq: Specify default governor on command line ...
2020-08-03Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: ACPI: fix 'return' with no value build warning intel_idle: Customize IceLake server support cpuidle: change enter_s2idle() prototype cpuidle: psci: Prevent domain idlestates until consumers are ready cpuidle: psci: Convert PM domain to platform driver cpuidle: psci: Fix error path via converting to a platform driver cpuidle: psci: Fail cpuidle registration if set OSI mode failed cpuidle: psci: Split into two separate build objects intel_idle: Eliminate redundant static variable
2020-08-03Merge branches 'pm-em' and 'pm-core'Rafael J. Wysocki
* pm-em: OPP: refactor dev_pm_opp_of_register_em() and update related drivers Documentation: power: update Energy Model description PM / EM: change name of em_pd_energy to em_cpu_energy PM / EM: remove em_register_perf_domain PM / EM: add support for other devices than CPUs in Energy Model PM / EM: update callback structure and add device pointer PM / EM: introduce em_dev_register_perf_domain function PM / EM: change naming convention from 'capacity' to 'performance' * pm-core: mmc: jz4740: Use pm_ptr() macro PM: Make *_DEV_PM_OPS macros use __maybe_unused PM: core: introduce pm_ptr() macro
2020-08-03Merge branch 'pm-devfreq'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: Fix the wrong end with semicolon PM / devfreq: Fix indentaion of devfreq_summary debugfs node PM / devfreq: Clean up the devfreq instance name in sysfs attr memory: samsung: exynos5422-dmc: Add module param to control IRQ mode memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold memory: samsung: exynos5422-dmc: Use delayed timer as default PM / devfreq: Add support delayed timer for polling mode dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle PM / devfreq: tegra: Add Dmitry as a maintainer PM / devfreq: event: Fix trivial spelling PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
2020-08-02md/raid5: Allow degraded raid6 to do rmwChangSyun Peng
Degraded raid6 always do reconstruct-write now. With raid6 xor supported, we can do rmw in degraded raid6. This patch can reduce many read IOs to improve performance. If the failed disk is P, Q or the disk we want to write to, we may need to do reconstruct-write in max degraded raid6. In this situation we can not read enough data from handle_stripe_dirtying() so we have to set force_rcw in handle_stripe_fill() to read all data. Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Reviewed-by: Danny Shih <dannyshih@synology.com> Signed-off-by: ChangSyun Peng <allenpeng@synology.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md/raid5: Fix Force reconstruct-write io stuck in degraded raid5ChangSyun Peng
In degraded raid5, we need to read parity to do reconstruct-write when data disks fail. However, we can not read parity from handle_stripe_dirtying() in force reconstruct-write mode. Reproducible Steps: 1. Create degraded raid5 mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing 2. Set rmw_level to 0 echo 0 > /sys/block/md2/md/rmw_level 3. IO to raid5 Now some io may be stuck in raid5. We can use handle_stripe_fill() to read the parity in this situation. Cc: <stable@vger.kernel.org> # v4.4+ Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Reviewed-by: Danny Shih <dannyshih@synology.com> Signed-off-by: ChangSyun Peng <allenpeng@synology.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-03Revert "xen/balloon: Fix crash when ballooning on x86 32 bit PAE"Roger Pau Monne
This reverts commit dfd74a1edfaba5864276a2859190a8d242d18952. This has been fixed by commit dca4436d1cf9e0d237c which added the out of bounds check to __add_memory, so that trying to add blocks past MAX_PHYSMEM_BITS will fail. Note the check in the Xen balloon driver was bogus anyway, as it checked the start address of the resource, but it should instead test the end address to assert the whole resource falls below MAX_PHYSMEM_BITS. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200727091342.52325-4-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-03xen/balloon: make the balloon wait interruptibleRoger Pau Monne
So it can be killed, or else processes can get hung indefinitely waiting for balloon pages. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200727091342.52325-3-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-03xen/balloon: fix accounting in alloc_xenballooned_pages error pathRoger Pau Monne
target_unpopulated is incremented with nr_pages at the start of the function, but the call to free_xenballooned_pages will only subtract pgno number of pages, and thus the rest need to be subtracted before returning or else accounting will be skewed. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200727091342.52325-2-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-02raid5: don't duplicate code for different paths in handle_stripeGuoqing Jiang
As we can see, R5_LOCKED is set and s.locked is increased whether R5_ReWrite is set or not, so move it to common path. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_showGuoqing Jiang
Replace mddev_lock with spin_lock to align with other show methods in raid5_attrs. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md: print errno in super_writtenGuoqing Jiang
It is better to print errno instead of bi_status. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md/raid5: remove the redundant setting of STRIPE_HANDLEGuoqing Jiang
The flag is already set before compare rcw with rmw, so it is not necessary to do it again. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md: register new md sysfs file 'uuid' read-onlySebastian Parschauer
Report the UUID of the MD array in the following format: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx This is useful if you don't want to wait for udev to identify array. And it is also easy for script to monitor it with the format. Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> [Guoqing: mention the change in md.rst] Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md: fix max sectors calculation for super 1.0Xiao Ni
To grow size of super 1.0 raid array, it is necessary to check the device max usable size. Now it uses rdev->sectors for max usable size. If one disk is 500G and the raid device only uses the 100GB of this disk. rdev->sectors can't tell the real max usable size. The max usable size should be dev_size-(superblock_size+bitmap_size+badblock_size). Also, remove unnecessary sb_start update in super_1_rdev_size_change(). Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-03xen/privcmd: Convert get_user_pages*() to pin_user_pages*()Souptick Joarder
In 2019, we introduced pin_user_pages*() and now we are converting get_user_pages*() to the new API as appropriate. [1] & [2] could be referred for more information. This is case 5 as per document [1]. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/ Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Paul Durrant <xadimgnik@gmail.com> Link: https://lore.kernel.org/r/1594525195-28345-4-git-send-email-jrdr.linux@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-03xen/privcmd: Mark pages as dirtySouptick Joarder
pages need to be marked as dirty before unpinned it in unlock_pages() which was oversight. This is fixed now. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Suggested-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Paul Durrant <xadimgnik@gmail.com> Link: https://lore.kernel.org/r/1594525195-28345-3-git-send-email-jrdr.linux@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-03xen/privcmd: Corrected error handling pathSouptick Joarder
Previously, if lock_pages() end up partially mapping pages, it used to return -ERRNO due to which unlock_pages() have to go through each pages[i] till *nr_pages* to validate them. This can be avoided by passing correct number of partially mapped pages & -ERRNO separately, while returning from lock_pages() due to error. With this fix unlock_pages() doesn't need to validate pages[i] till *nr_pages* for error scenario and few condition checks can be ignored. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Paul Durrant <xadimgnik@gmail.com> Link: https://lore.kernel.org/r/1594525195-28345-2-git-send-email-jrdr.linux@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-02ubi: fastmap: Free fastmap next anchor peb during detachZhihao Cheng
ubi_wl_entry related with the fm_next_anchor PEB is not freed during detach, which causes a memory leak. Don't forget to release fm_next_anchor PEB while detaching ubi from mtd when CONFIG_MTD_UBI_FASTMAP is enabled. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Fixes: 4b68bf9a69d22d ("ubi: Select fastmap anchor PEBs considering...") Signed-off-by: Richard Weinberger <richard@nod.at>
2020-08-02ubi: fastmap: Don't produce the initial next anchor PEB when fastmap is disabledZhihao Cheng
Following process triggers a memleak caused by forgetting to release the initial next anchor PEB (CONFIG_MTD_UBI_FASTMAP is disabled): 1. attach -> __erase_worker -> produce the initial next anchor PEB 2. detach -> ubi_fastmap_close (Do nothing, it should have released the initial next anchor PEB) Don't produce the initial next anchor PEB in __erase_worker() when fastmap is disabled. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de> Fixes: f9c34bb529975fe ("ubi: Fix producing anchor PEBs") Reported-by: syzbot+d9aab50b1154e3d163f5@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at>
2020-08-02mtd: rawnand: omap_elm: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-08-02mtd: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-08-02mtd: hyperbus: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-08-02Merge tag 'spi-nor/for-5.9' of ↵Richard Weinberger
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression.
2020-08-02brcmfmac: Set timeout value when configuring power saveNicolas Saenz Julienne
Set the timeout value as per cfg80211's set_power_mgmt() request. If the requested value value is left undefined we set it to 2 seconds, the maximum supported value. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721112302.22718-1-nsaenzjulienne@suse.de
2020-08-02bcma: gpio: Use irqchip templateLinus Walleij
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit call to gpiochip_irqchip_add(). The irqchip is instead added while adding the gpiochip. Cc: Rafał Miłecki <rafal@milecki.pl> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722111725.210923-1-linus.walleij@linaro.org
2020-08-02drivers: bcma: remove set but not used variable `addrh` and `sizeh`Zheng Yongjun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/bcma/scan.c: In function 'bcma_erom_get_addr_desc': drivers/bcma/scan.c:219 warning: variable `addrh` and `sizeh` set but not used [-Wunused-but-set-variable] Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721083935.13306-1-zhengyongjun3@huawei.com
2020-08-02wl1251: fix always return 0 errorWang Hai
wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'. Fixes: f7ad1eed4d4b ("wl1251: retry power save entry") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730073939.33704-1-wanghai38@huawei.com
2020-08-02airo: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200728114128.1218310-1-vaibhavgupta40@gmail.com
2020-08-02intersil: fix wiki website urlFlavio Suligoi
In some Intersil files, the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200723135254.594984-1-f.suligoi@asem.it
2020-08-02qtnfmac: Missing platform_device_unregister() on error in qtnf_core_mac_alloc()Wang Hai
Add the missing platform_device_unregister() before return from qtnf_core_mac_alloc() in the error handling case. Fixes: 616f5701f4ab ("qtnfmac: assign each wiphy to its own virtual platform device") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730064910.37589-1-wanghai38@huawei.com
2020-08-02ipw2x00: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ipw2100_msg_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_msg_allocate Moreover, 'ipw2100_msg_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'status_queue_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_rx_allocate --> status_queue_allocate Moreover, 'ipw2100_rx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'bd_queue_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_rx_allocate --> bd_queue_allocate Moreover, 'ipw2100_rx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'ipw2100_tx_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_tx_allocate Moreover, 'ipw2100_tx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'ipw_queue_tx_init()' (ipw2200.c), GFP_KERNEL can be used because it is called from a call chain that already uses GFP_KERNEL and no spin_lock is taken in the between. The call chain is: ipw_up --> ipw_load --> ipw_queue_reset --> ipw_queue_tx_init 'ipw_up()' already uses GFP_KERNEL for some other memory allocations. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722101716.26185-1-christophe.jaillet@wanadoo.fr
2020-08-02ipw2100: Use GFP_KERNEL instead of GFP_ATOMIC in some memory allocationChristophe JAILLET
The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_tx_allocate No lock is taken in the between. So it is safe to use GFP_KERNEL in 'ipw2100_tx_allocate()'. BTW, 'ipw2100_queues_allocate()' also calls 'ipw2100_msg_allocate()' which already allocates some memory using GFP_KERNEL. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722101701.26126-1-christophe.jaillet@wanadoo.fr
2020-08-02hostap: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions as through the generic framework, PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721150547.371763-1-vaibhavgupta40@gmail.com
2020-08-02b43legacy: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200719111124.58167-1-grandmaster@al2klimov.de
2020-08-02b43: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200719110115.58085-1-grandmaster@al2klimov.de
2020-08-02ipw2x00: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200718100240.98593-1-grandmaster@al2klimov.de
generated by cgit (git 2.34.1) at 2025-09-15 02:24:10 +0000