summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-07-27mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02gDavid Clear
The Micron mt25qu02g supports both x2 and x4 transactions. Add the SPI_NOR_DUAL_READ flag to its spi_nor_ids[] table entry. Tested on Pensando SoC hardware with a cadence quadspi controller via drivers/spi/spi-cadence-quadspi.c, in x2 mode at 50MHz. - random data write, erase, read - verified erase operations - random data write, read/compare - verified write/read operations Signed-off-by: David Clear <dac2@pensando.io> Acked-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20200720163656.38006-3-dac2@pensando.io Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-07-27mtd: spi-nor: macronix: Add support for mx66u2g45gDavid Clear
The Macronix mx66u2g45g is a 1.8V, 2Gbit (256MB) device that supports x1, x2, or x4 operation. Tested on Pensando SoC hardware with a cadence quadspi controller via drivers/spi/spi-cadence-quadspi.c, in x2 mode at 50MHz. - random data write, erase, read - verified erase operations - random data write, read/compare - verified write/read operations Signed-off-by: David Clear <dac2@pensando.io> Acked-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20200720163656.38006-2-dac2@pensando.io Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-07-27mtd: spi-nor: intel-spi: Simulate WRDI commandAlexander Sverdlin
After spi_nor_write_disable() return code checks were introduced in the spi-nor front end intel-spi backend stopped to work because WRDI was never supported and always failed. Just pretend it was sucessful and ignore the command itself. HW sequencer shall do the right thing automatically, while with SW sequencer we cannot do it anyway, because the only tool we had was preopcode and it makes no sense for WRDI. Fixes: bce679e5ae3a ("mtd: spi-nor: Check for errors after each Register Operation") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/282e1305-fd08-e446-1a22-eb4dff78cfb4@nokia.com Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2020-07-27Merge tag 'amd-drm-next-5.9-2020-07-24' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.9-2020-07-24: amdgpu: - Misc sienna cichlid fixes - Final bits of swSMU cleanup - Misc display fixes - Misc VCN fixes - Eeprom i2c cleanup - Drop amd vrr_range debugfs in favor of core drm Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200724205712.3913-1-alexander.deucher@amd.com
2020-07-27Merge branch 'linux-5.8' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
A couple of fixes for issues relating to format modifiers (there's still a patch pending from James Jones to hopefully address the remaining ones), regression fix from the recent HDA nightmare, and a race fix for Turing modesetting. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5aAp+FZMZGTB+Nszc==h5gEbdNV58sSRRQDF1R5qQRGg@mail.gmail.com
2020-07-27power: Convert to DEFINE_SHOW_ATTRIBUTEYongqiang Liu
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-26power: reset: keystone-reset: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-07-26drm/mcde: Fix stability issueLinus Walleij
Whenever a display update was sent, apart from updating the memory base address, we called mcde_display_send_one_frame() which also sent a command to the display requesting the TE IRQ and enabling the FIFO. When continuous updates are running this is wrong: we need to only send this to start the flow to the display on the very first update. This lead to the display pipeline locking up and crashing. Check if the flow is already running and in that case do not call mcde_display_send_one_frame(). This fixes crashes on the Samsung GT-S7710 (Skomer). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Stephan Gerhold <stephan@gerhold.net> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200718233323.3407670-1-linus.walleij@linaro.org
2020-07-26Merge branch 'x86/urgent' into x86/cleanupsIngo Molnar
Refresh the branch for a dependent commit. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-07-26drm/bridge: nwl-dsi: Drop DRM_BRIDGE_ATTACH_NO_CONNECTOR check.Guido Günther
We don't create a connector but let panel_bridge handle that so there's no point in rejecting DRM_BRIDGE_ATTACH_NO_CONNECTOR. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/8b6545b991afce6add0a24f5f5d116778b0cb763.1595096667.git.agx@sigxcpu.org
2020-07-26drm/panel: Fix auo, kd101n80-45na horizontal noise on edges of panelJitao Shi
Fine tune the HBP and HFP to avoid the dot noise on the left and right edges. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200714123332.37609-1-jitao.shi@mediatek.com
2020-07-26drm: panel: simple: Delay HPD checking on boe_nv133fhm_n61 for 15 msDouglas Anderson
On boe_nv133fhm_n62 (and presumably on boe_nv133fhm_n61) a scope shows a small spike on the HPD line right when you power the panel on. The picture looks something like this: +-------------------------------------- | | | Power ---+ +--- | ++ | +----+| | HPD -----+ +---------------------------+ So right when power is applied there's a little bump in HPD and then there's small spike right before it goes low. The total time of the little bump plus the spike was measured on one panel as being 8 ms long. The total time for the HPD to go high on the same panel was 51.2 ms, though the datasheet only promises it is < 200 ms. When asked about this glitch, BOE indicated that it was expected and persisted until the TCON has been initialized. If this was a real hotpluggable DP panel then this wouldn't matter a whole lot. We'd debounce the HPD signal for a really long time and so the little blip wouldn't hurt. However, this is not a hotpluggable DP panel and the the debouncing logic isn't needed and just shows down the time needed to get the display working. This is why the code in panel_simple_prepare() doesn't do debouncing and just waits for HPD to go high once. Unfortunately if we get unlucky and happen to poll the HPD line right at the spike we can try talking to the panel before it's ready. Let's handle this situation by putting in a 15 ms prepare delay and decreasing the "hpd absent delay" by 15 ms. That means: * If you don't have HPD hooked up at all you've still got the hardcoded 200 ms delay. * If you've got HPD hooked up you will always wait at least 15 ms before checking HPD. The only case where this could be bad is if the panel is sharing a voltage rail with something else in the system and was already turned on long before the panel came up. In such a case we'll be delaying 15 ms for no reason, but it's not a huge delay and I don't see any other good solution to handle that case. Even though the delay was measured as 8 ms, 15 ms was chosen to give a bit of margin. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200716132120.1.I01e738cd469b61fc9b28b3ef1c6541a4f48b11bf@changeid
2020-07-26drm/bridge/adv7511: set the bridge type properlyLaurentiu Palcu
After the drm_bridge_connector_init() helper function has been added, the ADV driver has been changed accordingly. However, the 'type' field of the bridge structure was left unset, which makes the helper function always return -EINVAL. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Vinod Koul <vkoul@kernel.org> # tested on DragonBoard 410c Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200720124228.12552-1-laurentiu.palcu@oss.nxp.com
2020-07-26Merge tag 'char-misc-5.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master Pull char/misc driver fixes from Greg KH: "Here are a few small driver fixes for 5.8-rc7 They include: - habanalabs fixes - tiny fpga driver fixes - /dev/mem fixup from previous changes - interconnect driver fixes - binder fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: interconnect: msm8916: Fix buswidth of pcnoc_s nodes interconnect: Do not skip aggregation for disabled paths /dev/mem: Add missing memory barriers for devmem_inode binder: Don't use mmput() from shrinker function. habanalabs: prevent possible out-of-bounds array access fpga: dfl: fix bug in port reset handshake fpga: dfl: pci: reduce the scope of variable 'ret' habanalabs: set 4s timeout for message to device CPU habanalabs: set clock gating per engine habanalabs: block WREG_BULK packet on PDMA
2020-07-26Merge tag 'driver-core-5.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master Pull driver core fix from Greg KH: "A single driver core fix for 5.8-rc7. It resolves a problem found in the previous fix for this code made in 5.8-rc6. Hopefully this is all now cleared up, as this seems to be the last of the reported issues in this area, and was tested on the problem hardware. This patch has been in linux-next with no reported problems" * tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: device property: Avoid NULL pointer dereference in device_get_next_child_node()
2020-07-26Merge tag 'staging-5.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master Pull staging driver fixes from Greg KH: "Five small staging driver fixes for 5.8-rc7 to resolve some reported problems: - four comedi driver fixes for problems found with them - a syzbot-found fix for the wlang-ng driver that resolves a much reported problem. All of these have been in linux-next with no reported issues" * tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: wlan-ng: properly check endpoint types staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
2020-07-26Merge tag 'tty-5.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into master Pull tty/serial/fbcon fixes from Greg KH: "Here are some small tty and serial and fbcon fixes for 5.8-rc7 to resolve some reported issues. The fbcon fix is in here as it was simpler to take it this way (and it was acked by the maintainer) as it was related to the vt console fix as well, both of which resolve syzbot-found issues in the console handling code. The other serial driver fixes are for small issues reported in the -rc releases. All of these have been in linux-next with no reported issues" * tag 'tty-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins. serial: 8250_mtk: Fix high-speed baud rates clamping serial: 8250: fix null-ptr-deref in serial8250_start_tx() serial: tegra: drop bogus NULL tty-port checks serial: tegra: fix CREAD handling for PIO tty: xilinx_uartps: Really fix id assignment vt: Reject zero-sized screen buffer size.
2020-07-26drm: of: Fix double-free bugBiju Das
Fix double-free bug in the error path. Fixes: 6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1595502654-40595-1-git-send-email-biju.das.jz@bp.renesas.com
2020-07-26Merge tag 'usb-5.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into master Pull USB fixes from Greg KH: "Three small USB XHCI driver fixes for 5.8-rc7. They all resolve some minor issues that have been reported on some different platforms. All of these have been in linux-next with no reported issues" * tag 'usb-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: tegra: Fix allocation for the FPCI context usb: xhci: Fix ASM2142/ASM3142 DMA addressing usb: xhci-mtk: fix the failure of bandwidth allocation
2020-07-26Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi into master Pull SCSI fix from James Bottomley: "Small core patch to fix a corner case bug: we forgot to run the queues to handle starvation in the error exit from the scsi_queue_rq routine, which can lead to hangs on error conditions" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Run queue in case of I/O resource contention failure
2020-07-26nvme-pci: prevent SK hynix PC400 from using Write Zeroes commandKai-Heng Feng
After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes command"), SK hynix PC400 becomes very slow with the following error message: [ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0] SK Hynix PC400 has a buggy firmware that treats NLB as max value instead of a range, so the NLB passed isn't a valid value to the firmware. According to SK hynix there are three commands are affected: - Write Zeroes - Compare - Write Uncorrectable Right now only Write Zeroes is implemented, so disable it completely on SK hynix PC400. BugLink: https://bugs.launchpad.net/bugs/1872383 Cc: kyounghwan sohn <kyounghwan.sohn@sk.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-26nvme-tcp: fix possible hang waiting for icresp responseSagi Grimberg
If the controller died exactly when we are receiving icresp we hang because icresp may never return. Make sure to set a high finite limit. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-26macintosh/via-macii: Clarify definition of macii_init()Finn Thain
The function prototype correctly specifies the 'static' storage class. Let the function definition match the declaration for better readability. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c025aed0b1506399b73ff1d1bfa40ed641fcb3e3.1593318192.git.fthain@telegraphics.com.au
2020-07-26macintosh/via-macii: Use the stack for reset request storageFinn Thain
The adb_request struct can be stored on the stack because the request is synchronous and is completed before the function returns. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a40f80dde90991757007b6962c386a208c970586.1593318192.git.fthain@telegraphics.com.au
2020-07-26macintosh/via-macii: Use unsigned type for autopoll_devs variableFinn Thain
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ca5be30ba745c08c2b7a1f0618f99c61b303e983.1593318192.git.fthain@telegraphics.com.au
2020-07-26macintosh/via-macii: Use bool type for reading_reply variableFinn Thain
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/779551219a11b19e574dfcd87e4ef60af08c4fc3.1593318192.git.fthain@telegraphics.com.au
2020-07-26macintosh/via-macii: Handle poll replies correctlyFinn Thain
Userspace applications may use /dev/adb to send Talk requests. Such requests always have req->reply_expected == 1. The same is true of Talk requests sent by the kernel, except for poll requests queued internally by the via-macii driver. Those requests have req->reply_expected == 0. Consequently, poll reply packets get treated like autopoll reply packets. (It doesn't make sense to try to distinguish them.) Always enter 'reading' state after a poll request, so that the reply gets collected and passed to adb_input(), and none go missing. All Talk replies passed to adb_input() come from polling or autopolling, so call adb_input() with the autopoll parameter set to 1. Fixes: d95fd5fce88f0 ("m68k: Mac II ADB fixes") # v5.0+ Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/754cddfa045e5bfa53e5da199831de02e7d2f27f.1593318192.git.fthain@telegraphics.com.au
2020-07-26macintosh/via-macii: Remove read_done stateFinn Thain
The driver state machine may enter the 'read_done' state when leaving the 'idle' or 'reading' state. This transition is pointless, as is the extra interrupt it requires. The interrupt is produced by the transceiver (even when it has no data to send) because an extra EVEN/ODD toggle was signalled by the driver. Drop the extra state to simplify the code. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") # v5.0+ Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0253194363af4426f9788796811a6a29fb87c713.1593318192.git.fthain@telegraphics.com.au
2020-07-26macintosh/via-macii: Handle /CTLR_IRQ signal correctlyFinn Thain
I'm told that the /CTLR_IRQ signal from the ADB transceiver gets interpreted by MacOS to mean SRQ, bus timeout or end-of-packet depending on the circumstances, and that Linux's via-macii driver does not correctly interpret this signal. Instead, the via-macii driver interprets certain received byte values (0x00 and 0xFF) as signalling end of packet and bus timeout (respectively). Problem is, those values can also appear under other circumstances. This patch changes the bus timeout, end of packet and SRQ detection logic to bring it closer to the logic that MacOS reportedly uses. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") # v5.0+ Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6541fda1d8db3ae87c3abe17d189a10dc96e2382.1593318192.git.fthain@telegraphics.com.au
2020-07-26macintosh/via-macii: Poll the device most likely to respondFinn Thain
Poll the most recently polled device by default, rather than the lowest device address that happens to be enabled in autopoll_devs. This improves input latency. Re-use macii_queue_poll() rather than duplicate that logic. This eliminates a static struct and function. Fixes: d95fd5fce88f0 ("m68k: Mac II ADB fixes") # v5.0+ Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5836f80886ebcfbe5be5fb7e0dc49feed6469712.1593318192.git.fthain@telegraphics.com.au
2020-07-26macintosh/via-macii: Access autopoll_devs when inside lockFinn Thain
The interrupt handler should be excluded when accessing the autopoll_devs variable. Fixes: d95fd5fce88f0 ("m68k: Mac II ADB fixes") # v5.0+ Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5952dd8a9bc9de90f1acc4790c51dd42b4c98065.1593318192.git.fthain@telegraphics.com.au
2020-07-26macintosh/adb-iop: Implement SRQ autopollingFinn Thain
The adb_driver.autopoll method is needed during ADB bus scan and device address assignment. Implement this method so that the IOP's list of device addresses can be updated. When the list is empty, disable SRQ autopolling. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0fb7fdcd99d7820bb27faf1f27f7f6f1923914ef.1590880623.git.fthain@telegraphics.com.au
2020-07-26macintosh/adb-iop: Implement sending -> idle state transitionFinn Thain
On leaving the 'sending' state, proceed to the 'idle' state if no reply is expected. Drop redundant test for adb_iop_state == sending && current_req. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6991996dd4aaf0b52cfd650172bf0f6fbe37a452.1590880623.git.fthain@telegraphics.com.au
2020-07-26macintosh/adb-iop: Implement idle -> sending state transitionFinn Thain
In the present algorithm, the 'idle' state transition does not take place until there's a bus timeout. Once idle, the driver does not automatically proceed with the next request. Change the algorithm so that queued ADB requests will be sent as soon as the driver becomes idle. This is to take place after the current IOP message is completed. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/dedcdfc62f43e85cc4c2a8d211a7e2fec7bc7c1a.1590880623.git.fthain@telegraphics.com.au
2020-07-26macintosh/adb-iop: Resolve static checker warningsFinn Thain
drivers/macintosh/adb-iop.c:215:28: warning: Using plain integer as NULL pointer drivers/macintosh/adb-iop.c:170:5: warning: symbol 'adb_iop_probe' was not declared. Should it be static? drivers/macintosh/adb-iop.c:177:5: warning: symbol 'adb_iop_init' was not declared. Should it be static? drivers/macintosh/adb-iop.c:184:5: warning: symbol 'adb_iop_send_request' was not declared. Should it be static? drivers/macintosh/adb-iop.c:230:5: warning: symbol 'adb_iop_autopoll' was not declared. Should it be static? drivers/macintosh/adb-iop.c:236:6: warning: symbol 'adb_iop_poll' was not declared. Should it be static? drivers/macintosh/adb-iop.c:241:5: warning: symbol 'adb_iop_reset_bus' was not declared. Should it be static? Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/25edf4450abd20e002b166ba3a11189dc1efa906.1590880623.git.fthain@telegraphics.com.au
2020-07-26macintosh/adb-iop: Access current_req and adb_iop_state when inside lockFinn Thain
Drop the redundant local_irq_save/restore() from adb_iop_start() because the caller has to do it anyway. This is the pattern used in via-macii. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bbe32b087c7e04d68e2425f6a2df4a414d167c32.1590880623.git.fthain@telegraphics.com.au
2020-07-26macintosh/adb-iop: Adopt bus reset algorithm from via-macii driverFinn Thain
This algorithm is slightly shorter and avoids the surprising adb_iop_start() call in adb_iop_poll(). Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b63d56ecb6e75f11a0bf02231f3b2db656a528a3.1590880623.git.fthain@telegraphics.com.au
2020-07-26macintosh/adb-iop: Correct comment textFinn Thain
This patch improves comment style and corrects some misunderstandings in the text. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/996f835d2f3d90baaaf9ee954e252d06e8886c6f.1590880623.git.fthain@telegraphics.com.au
2020-07-26macintosh/adb-iop: Remove dead and redundant codeFinn Thain
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7720ffb559c334504e16b24d9c2f3b8973d2d674.1590880623.git.fthain@telegraphics.com.au
2020-07-26i2c: rcar: slave: only send STOP event when we have been addressedWolfram Sang
When the SSR interrupt is activated, it will detect every STOP condition on the bus, not only the ones after we have been addressed. So, enable this interrupt only after we have been addressed, and disable it otherwise. Fixes: de20d1857dd6 ("i2c: rcar: add slave support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-25bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
2020-07-25tools/testing/nvdimm: Emulate firmware activation commandsDan Williams
Augment the existing firmware update emulation to track activations and validate proper update vs activate sequencing. The DIMM firmware activate capability has a concept of a maximum amount of time platform firmware will quiesce the system relative to how many DIMMs are being activated in parallel. Simulate that DIMM activation happens serially, 1 second per-DIMM, and limit the max at 3 seconds. The nfit_test0 bus emulates 5 DIMMs so it will take 2 activations to update all DIMMs. Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25ACPI: NFIT: Define runtime firmware activation commandsDan Williams
Platform reboots are expensive. Towards reducing downtime to apply firmware updates the Intel NVDIMM command definition is growing support for applying live firmware updates that only require temporarily suspending memory traffic instead of a full reboot. Follow-on commits add support for triggering firmware activation, this patch only defines the commands, adds probe support, and validates that they are blocked via the ioctl path. The ioctl-path block ensures that the OS is in charge since these commands have side effects only the OS can handle. Specifically firmware activation may cause the memory controller to be quiesced on the order of 100s of milliseconds. In that case Linux ensure the activation only takes place while the OS is in a suspend state. Link: https://pmem.io/documents/IntelOptanePMem_DSM_Interface-V2.0.pdf Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptorDan Williams
DSMs are strictly an ACPI mechanism, evict the bus_dsm_mask concept from the generic 'struct nvdimm_bus_descriptor' object. As a side effect the test facility ->bus_nfit_cmd_force_en is no longer necessary. The test infrastructure can communicate that information directly in ->bus_dsm_mask. Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25libnvdimm: Validate command family indicesDan Williams
The ND_CMD_CALL format allows for a general passthrough of passlisted commands targeting a given command set. However there is no validation of the family index relative to what the bus supports. - Update the NFIT bus implementation (the only one that supports ND_CMD_CALL passthrough) to also passlist the valid set of command family indices. - Update the generic __nd_ioctl() path to validate that field on behalf of all implementations. Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism") Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-25Merge tag 'timers-urgent-2020-07-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull timer fix from Ingo Molnar: "Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's" * tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
2020-07-25Merge tag 'efi-urgent-2020-07-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull EFI fixes from Ingo Molnar: "Various EFI fixes: - Fix the layering violation in the use of the EFI runtime services availability mask in users of the 'efivars' abstraction - Revert build fix for GCC v4.8 which is no longer supported - Clean up some x86 EFI stub details, some of which are borderline bugs that copy around garbage into padding fields - let's fix these out of caution. - Fix build issues while working on RISC-V support - Avoid --whole-archive when linking the stub on arm64" * tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Revert "efi/x86: Fix build with gcc 4" efi/efivars: Expose RT service availability via efivars abstraction efi/libstub: Move the function prototypes to header file efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds efi/libstub/arm64: link stub lib.a conditionally efi/x86: Only copy upto the end of setup_header efi/x86: Remove unused variables
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net into masterLinus Torvalds
Pull networking fixes from David Miller: 1) Fix RCU locaking in iwlwifi, from Johannes Berg. 2) mt76 can access uninitialized NAPI struct, from Felix Fietkau. 3) Fix race in updating pause settings in bnxt_en, from Vasundhara Volam. 4) Propagate error return properly during unbind failures in ax88172a, from George Kennedy. 5) Fix memleak in adf7242_probe, from Liu Jian. 6) smc_drv_probe() can leak, from Wang Hai. 7) Don't muck with the carrier state if register_netdevice() fails in the bonding driver, from Taehee Yoo. 8) Fix memleak in dpaa_eth_probe, from Liu Jian. 9) Need to check skb_put_padto() return value in hsr_fill_tag(), from Murali Karicheri. 10) Don't lose ionic RSS hash settings across FW update, from Shannon Nelson. 11) Fix clobbered SKB control block in act_ct, from Wen Xu. 12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang. 13) IS_UDPLITE cleanup a long time ago, incorrectly handled transformations involving UDPLITE_RECV_CC. From Miaohe Lin. 14) Unbalanced locking in netdevsim, from Taehee Yoo. 15) Suppress false-positive error messages in qed driver, from Alexander Lobakin. 16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye. 17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost. 18) Uninitialized value in geneve_changelink(), from Cong Wang. 19) Fix deadlock in xen-netfront, from Andera Righi. 19) flush_backlog() frees skbs with IRQs disabled, so should use dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) drivers/net/wan: lapb: Corrected the usage of skb_cow dev: Defer free of skbs in flush_backlog qrtr: orphan socket in qrtr_release() xen-netfront: fix potential deadlock in xennet_remove() flow_offload: Move rhashtable inclusion to the source file geneve: fix an uninitialized value in geneve_changelink() bonding: check return value of register_netdevice() in bond_newlink() tcp: allow at most one TLP probe per flight AX.25: Prevent integer overflows in connect and sendmsg cxgb4: add missing release on skb in uld_send() net: atlantic: fix PTP on AQC10X AX.25: Prevent out-of-bounds read in ax25_sendmsg() sctp: shrink stream outq when fails to do addstream reconf sctp: shrink stream outq only when new outcnt < old outcnt AX.25: Fix out-of-bounds read in ax25_connect() enetc: Remove the mdio bus on PF probe bailout net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload net: ethernet: ave: Fix error returns in ave_init drivers/net/wan/x25_asy: Fix to make it work ipvs: fix the connection sync failed in some cases ...
2020-07-25bcache: fix bio_{start,end}_io_acct with proper deviceColy Li
Commit 85750aeb748f ("bcache: use bio_{start,end}_io_acct") moves the io account code to the location after bio_set_dev(bio, dc->bdev) in cached_dev_make_request(). Then the account is performed incorrectly on backing device, indeed the I/O should be counted to bcache device like /dev/bcache0. With the mistaken I/O account, iostat does not display I/O counts for bcache device and all the numbers go to backing device. In writeback mode, the hard drive may have 340K+ IOPS which is impossible and wrong for spinning disk. This patch introduces bch_bio_start_io_acct() and bch_bio_end_io_acct(), which switches bio->bi_disk to bcache device before calling bio_start_io_acct() or bio_end_io_acct(). Now the I/Os are counted to bcache device, and bcache device, cache device and backing device have their correct I/O count information back. Fixes: 85750aeb748f ("bcache: use bio_{start,end}_io_acct") Signed-off-by: Coly Li <colyli@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-21 18:10:57 +0000