| Age | Commit message (Collapse) | Author |
|---|
|
Add SVM device memory mirroring which enables device pages for
migration. Enabled via CONFIG_XE_DEVMEM_MIRROR Kconfig. Kconfig option
defaults to enabled. If not enabled, SVM will work sans migration and
KMD memory footprint will be less.
v3:
- Add CONFIG_XE_DEVMEM_MIRROR
v4:
- Fix Kconfig (Himal)
- Use %pe to print errors (Thomas)
- Fix alignment issue (Checkpatch)
v5:
- s/xe_mem_region/xe_vram_region (Rebase)
v6:
- Only compile if CONFIG_DRM_GPUSVM selected (CI, Lucas)
- s/drm_info/drm_dbg/
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-22-matthew.brost@intel.com
|
|
Add functions which migrate to / from VRAM accepting a single DPA
argument (VRAM) and array of dma addresses (SRAM). Used for SVM
migrations.
v2:
- Don't unlock job_mutex in error path of xe_migrate_vram
v3:
- Kernel doc (Thomas)
- Better commit message (Thomas)
- s/dword/num_dword (Thomas)
- Return error on to large of migration (Thomas)
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-21-matthew.brost@intel.com
|
|
Add the DRM_XE_QUERY_CONFIG_FLAG_HAS_CPU_ADDR_MIRROR device query flag,
which indicates whether the device supports CPU address mirroring. The
intent is for UMDs to use this query to determine if a VM can be set up
with CPU address mirroring. This flag is implemented by checking if the
device supports GPU faults.
v7:
- Only report enabled if CONFIG_DRM_GPUSVM is selected (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-20-matthew.brost@intel.com
|
|
Support for CPU address mirror bindings in SRAM fully in place, enable the
implementation.
v3:
- s/system allocator/CPU address mirror (Thomas)
v7:
- Only enable uAPI if selected by GPU SVM (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-19-matthew.brost@intel.com
|
|
uAPI is designed with the use case that only mapping a BO to a malloc'd
address will unbind a CPU-address mirror VMA. Therefore, allowing a
CPU-address mirror VMA to unbind when the GPU has bindings in the range
being unbound does not make much sense. This behavior is not supported,
as it simplifies the code. This decision can always be revisited if a
use case arises.
v3:
- s/arrises/arises (Thomas)
- s/system allocator/GPU address mirror (Thomas)
- Kernel doc (Thomas)
- Newline between function defs (Thomas)
v5:
- Kernel doc (Thomas)
v6:
- Only compile if CONFIG_DRM_GPUSVM selected (CI, Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-18-matthew.brost@intel.com
|
|
Add unbind to SVM garbage collector. To facilitate add unbind support
function to VM layer which unbinds a SVM range. Also teach PT layer to
understand unbinds of SVM ranges.
v3:
- s/INVALID_VMA/XE_INVALID_VMA (Thomas)
- Kernel doc (Thomas)
- New GPU SVM range structure (Thomas)
- s/DRM_GPUVA_OP_USER/DRM_GPUVA_OP_DRIVER (Thomas)
v4:
- Use xe_vma_op_unmap_range (Himal)
v5:
- s/PY/PT (Thomas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-17-matthew.brost@intel.com
|
|
Add basic SVM garbage collector which destroy a SVM range upon a MMU
UNMAP event. The garbage collector runs on worker or in GPU fault
handler and is required as locks in the path of reclaim are required and
cannot be taken the notifier.
v2:
- Flush garbage collector in xe_svm_close
v3:
- Better commit message (Thomas)
- Kernel doc (Thomas)
- Use list_first_entry_or_null for garbage collector loop (Thomas)
- Don't add to garbage collector if VM is closed (Thomas)
v4:
- Use %pe to print error (Thomas)
v5:
- s/visable/visible (Thomas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-16-matthew.brost@intel.com
|
|
Add (re)bind to SVM page fault handler. To facilitate add support
function to VM layer which (re)binds a SVM range. Also teach PT layer to
understand (re)binds of SVM ranges.
v2:
- Don't assert BO lock held for range binds
- Use xe_svm_notifier_lock/unlock helper in xe_svm_close
- Use drm_pagemap dma cursor
- Take notifier lock in bind code to check range state
v3:
- Use new GPU SVM range structure (Thomas)
- Kernel doc (Thomas)
- s/DRM_GPUVA_OP_USER/DRM_GPUVA_OP_DRIVER (Thomas)
v5:
- Kernel doc (Thomas)
v6:
- Only compile if CONFIG_DRM_GPUSVM selected (CI, Lucas)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Tested-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-15-matthew.brost@intel.com
|
|
Add SVM range invalidation vfunc which invalidates PTEs. A new PT layer
function which accepts a SVM range is added to support this. In
addition, add the basic page fault handler which allocates a SVM range
which is used by SVM range invalidation vfunc.
v2:
- Don't run invalidation if VM is closed
- Cycle notifier lock in xe_svm_close
- Drop xe_gt_tlb_invalidation_fence_fini
v3:
- Better commit message (Thomas)
- Add lockdep asserts (Thomas)
- Add kernel doc (Thomas)
- s/change/changed (Thomas)
- Use new GPU SVM range / notifier structures
- Ensure PTEs are zapped / dma mappings are unmapped on VM close (Thomas)
v4:
- Fix macro (Checkpatch)
v5:
- Use range start/end helpers (Thomas)
- Use notifier start/end helpers (Thomas)
v6:
- Use min/max helpers (Himal)
- Only compile if CONFIG_DRM_GPUSVM selected (CI, Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-13-matthew.brost@intel.com
|
|
Clear root PT entry and invalidate entire VM's address space when
closing the VM. Will prevent the GPU from accessing any of the VM's
memory after closing.
v2:
- s/vma/vm in kernel doc (CI)
- Don't nuke migration VM as this occur at driver unload (CI)
v3:
- Rebase and pull into SVM series (Thomas)
- Wait for pending binds (Thomas)
v5:
- Remove xe_gt_tlb_invalidation_fence_fini in error case (Matt Auld)
- Drop local migration bool (Thomas)
v7:
- Add drm_dev_enter/exit protecting invalidation (CI, Matt Auld)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-12-matthew.brost@intel.com
|
|
Add dma_addr res cursor which walks an array of drm_pagemap_dma_addr.
Useful for SVM ranges and programing page tables.
v3:
- Better commit message (Thomas)
- Use new drm_pagemap.h location
v7:
- Fix kernel doc (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-11-matthew.brost@intel.com
|
|
Add SVM init / close / fini to faulting VMs. Minimual implementation
acting as a placeholder for follow on patches.
v2:
- Add close function
v3:
- Better commit message (Thomas)
- Kernel doc (Thomas)
- Update chunk array to be unsigned long (Thomas)
- Use new drm_gpusvm.h header location (Thomas)
- Newlines between functions in xe_svm.h (Thomas)
- Call drm_gpusvm_driver_set_lock in init (Thomas)
v6:
- Only compile if CONFIG_DRM_GPUSVM selected (CI, Lucas)
v7:
- Only select CONFIG_DRM_GPUSVM if DEVICE_PRIVATE (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-10-matthew.brost@intel.com
|
|
Add the DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR flag, which is used to
create unpopulated virtual memory areas (VMAs) without memory backing or
GPU page tables. These VMAs are referred to as CPU address mirror VMAs.
The idea is that upon a page fault or prefetch, the memory backing and
GPU page tables will be populated.
CPU address mirror VMAs only update GPUVM state; they do not have an
internal page table (PT) state, nor do they have GPU mappings.
It is expected that CPU address mirror VMAs will be mixed with buffer
object (BO) VMAs within a single VM. In other words, system allocations
and runtime allocations can be mixed within a single user-mode driver
(UMD) program.
Expected usage:
- Bind the entire virtual address (VA) space upon program load using the
DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR flag.
- If a buffer object (BO) requires GPU mapping (runtime allocation),
allocate a CPU address using mmap(PROT_NONE), bind the BO to the
mmapped address using existing bind IOCTLs. If a CPU map of the BO is
needed, mmap it again to the same CPU address using mmap(MAP_FIXED)
- If a BO no longer requires GPU mapping, munmap it from the CPU address
space and them bind the mapping address with the
DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR flag.
- Any malloc'd or mmapped CPU address accessed by the GPU will be
faulted in via the SVM implementation (system allocation).
- Upon freeing any mmapped or malloc'd data, the SVM implementation will
remove GPU mappings.
Only supporting 1 to 1 mapping between user address space and GPU
address space at the moment as that is the expected use case. uAPI
defines interface for non 1 to 1 but enforces 1 to 1, this restriction
can be lifted if use cases arrise for non 1 to 1 mappings.
This patch essentially short-circuits the code in the existing VM bind
paths to avoid populating page tables when the
DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR flag is set.
v3:
- Call vm_bind_ioctl_ops_fini on -ENODATA
- Don't allow DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR on non-faulting VMs
- s/DRM_XE_VM_BIND_FLAG_SYSTEM_ALLOCATOR/DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR (Thomas)
- Rework commit message for expected usage (Thomas)
- Describe state of code after patch in commit message (Thomas)
v4:
- Fix alignment (Checkpatch)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-9-matthew.brost@intel.com
|
|
Xe depends on DRM_GPUSVM for SVM implementation, select it in Kconfig.
v6:
- Don't select DRM_GPUSVM if UML (CI)
v7:
- Only select DRM_GPUSVM if DEVICE_PRIVATE (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-8-matthew.brost@intel.com
|
|
This patch introduces support for GPU Shared Virtual Memory (SVM) in the
Direct Rendering Manager (DRM) subsystem. SVM allows for seamless
sharing of memory between the CPU and GPU, enhancing performance and
flexibility in GPU computing tasks.
The patch adds the necessary infrastructure for SVM, including data
structures and functions for managing SVM ranges and notifiers. It also
provides mechanisms for allocating, deallocating, and migrating memory
regions between system RAM and GPU VRAM.
This is largely inspired by GPUVM.
v2:
- Take order into account in check pages
- Clear range->pages in get pages error
- Drop setting dirty or accessed bit in get pages (Vetter)
- Remove mmap assert for cpu faults
- Drop mmap write lock abuse (Vetter, Christian)
- Decouple zdd from range (Vetter, Oak)
- Add drm_gpusvm_range_evict, make it work with coherent pages
- Export drm_gpusvm_evict_to_sram, only use in BO evict path (Vetter)
- mmget/put in drm_gpusvm_evict_to_sram
- Drop range->vram_alloation variable
- Don't return in drm_gpusvm_evict_to_sram until all pages detached
- Don't warn on mixing sram and device pages
- Update kernel doc
- Add coherent page support to get pages
- Use DMA_FROM_DEVICE rather than DMA_BIDIRECTIONAL
- Add struct drm_gpusvm_vram and ops (Thomas)
- Update the range's seqno if the range is valid (Thomas)
- Remove the is_unmapped check before hmm_range_fault (Thomas)
- Use drm_pagemap (Thomas)
- Drop kfree_mapping (Thomas)
- dma mapp pages under notifier lock (Thomas)
- Remove ctx.prefault
- Remove ctx.mmap_locked
- Add ctx.check_pages
- s/vram/devmem (Thomas)
v3:
- Fix memory leak drm_gpusvm_range_get_pages
- Only migrate pages with same zdd on CPU fault
- Loop over al VMAs in drm_gpusvm_range_evict
- Make GPUSVM a drm level module
- GPL or MIT license
- Update main kernel doc (Thomas)
- Prefer foo() vs foo for functions in kernel doc (Thomas)
- Prefer functions over macros (Thomas)
- Use unsigned long vs u64 for addresses (Thomas)
- Use standard interval_tree (Thomas)
- s/drm_gpusvm_migration_put_page/drm_gpusvm_migration_unlock_put_page (Thomas)
- Drop err_out label in drm_gpusvm_range_find_or_insert (Thomas)
- Fix kernel doc in drm_gpusvm_range_free_pages (Thomas)
- Newlines between functions defs in header file (Thomas)
- Drop shall language in driver vfunc kernel doc (Thomas)
- Move some static inlines from head to C file (Thomas)
- Don't allocate pages under page lock in drm_gpusvm_migrate_populate_ram_pfn (Thomas)
- Change check_pages to a threshold
v4:
- Fix NULL ptr deref in drm_gpusvm_migrate_populate_ram_pfn (Thomas, Himal)
- Fix check pages threshold
- Check for range being unmapped under notifier lock in get pages (Testing)
- Fix characters per line
- Drop WRITE_ONCE for zdd->devmem_allocation assignment (Thomas)
- Use completion for devmem_allocation->detached (Thomas)
- Make GPU SVM depend on ZONE_DEVICE (CI)
- Use hmm_range_fault for eviction (Thomas)
- Drop zdd worker (Thomas)
v5:
- Select Kconfig deps (CI)
- Set device to NULL in __drm_gpusvm_migrate_to_ram (Matt Auld, G.G.)
- Drop Thomas's SoB (Thomas)
- Add drm_gpusvm_range_start/end/size helpers (Thomas)
- Add drm_gpusvm_notifier_start/end/size helpers (Thomas)
- Absorb drm_pagemap name changes (Thomas)
- Fix driver lockdep assert (Thomas)
- Move driver lockdep assert to static function (Thomas)
- Assert mmap lock held in drm_gpusvm_migrate_to_devmem (Thomas)
- Do not retry forever on eviction (Thomas)
v6:
- Fix drm_gpusvm_get_devmem_page alignment (Checkpatch)
- Modify Kconfig (CI)
- Compile out lockdep asserts (CI)
v7:
- Add kernel doc for flags fields (CI, Auld)
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-7-matthew.brost@intel.com
|
|
Introduce xe_bo_put_async to put a bo where the context is such that
the bo destructor can't run due to lockdep problems or atomic context.
If the put is the final put, freeing will be done from a work item.
v5:
- Kerenl doc for xe_bo_put_async (Thomas)
v7:
- Fix kernel doc (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-6-matthew.brost@intel.com
|
|
TTM doesn't support fair eviction via WW locking, this mitigated in by
using retry loops in exec and preempt rebind worker. Extend this retry
loop to BO allocation. Once TTM supports fair eviction this patch can be
reverted.
v4:
- Keep line break (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306012657.3505757-2-matthew.brost@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - new code bugs:
- wifi: nl80211: disable multi-link reconfiguration
Previous releases - regressions:
- gso: fix ownership in __udp_gso_segment
- wifi: iwlwifi:
- fix A-MSDU TSO preparation
- free pages allocated when failing to build A-MSDU
- ipv6: fix dst ref loop in ila lwtunnel
- mptcp: fix 'scheduling while atomic' in
mptcp_pm_nl_append_new_local_addr
- bluetooth: add check for mgmt_alloc_skb() in
mgmt_device_connected()
- ethtool: allow NULL nlattrs when getting a phy_device
- eth: be2net: fix sleeping while atomic bugs in
be_ndo_bridge_getlink
Previous releases - always broken:
- core: support TCP GSO case for a few missing flags
- wifi: mac80211:
- fix vendor-specific inheritance
- cleanup sta TXQs on flush
- llc: do not use skb_get() before dev_queue_xmit()
- eth: ipa: nable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX}
for v4.7"
* tag 'net-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: ipv6: fix missing dst ref drop in ila lwtunnel
net: ipv6: fix dst ref loop in ila lwtunnel
mctp i3c: handle NULL header address
net: dsa: mt7530: Fix traffic flooding for MMIO devices
net-timestamp: support TCP GSO case for a few missing flags
vlan: enforce underlying device type
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ppp: Fix KMSAN uninit-value warning with bpf
net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7
net: ipa: Fix QSB data for v4.7
net: ipa: Fix v4.7 resource group names
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
wifi: nl80211: disable multi-link reconfiguration
net: dsa: rtl8366rb: don't prompt users for LED control
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
llc: do not use skb_get() before dev_queue_xmit()
wifi: cfg80211: regulatory: improve invalid hints checking
caif_virtio: fix wrong pointer check in cfv_probe()
net: gso: fix ownership in __udp_gso_segment
...
|
|
Now that CDM_0 has been enabled for DPU 5.x+, add support for YUV formats
on writeback
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/641270/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
To prevent incorrect BW calculation, zero out dpu_core_perf_params
before it is passed into dpu_core_perf_aggregate().
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Fixes: 795aef6f3653 ("drm/msm/dpu: remove duplicate code calculating sum of bandwidths")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/641278/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Resources should be released only after all threads that utilize them
have been destroyed.
This commit ensures that resources are not released prematurely by waiting
for the associated workqueue to complete before deallocating them.
Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250305111739.1489003-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When used on Huawei hisi platforms, Prolific Mass Storage Card Reader
which the VID:PID is in 067b:2731 might fail to enumerate at boot time
and doesn't work well with LPM enabled, combination quirks:
USB_QUIRK_DELAY_INIT + USB_QUIRK_NO_LPM
fixed the problems.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250304070757.139473-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: 159f8a0209af ("gpio-rcar: Add DT support")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305163753.34913-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We currently call intel_set_cdclk_post_plane_update() far
too early. When pipes are active during the reprogramming
the current spot only works for the cd2x divider update
case, as that is synchronize to the pipe's vblank. Squashing
and crawling are not synchronized in any way, so doing the
programming while the pipes/planes are potentially still using
the old hardware state could lead to underruns.
Move the post plane reprgramming to a spot where we know
that the pipes/planes have switched over the new hardware
state.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218211913.27867-2-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
|
|
Pull NVMe fixe from Keith:
"nvme fixes for Linux 6.14
- TCP use after free fix on polling (Sagi)
- Controller memory buffer cleanup fixes (Icenowy)
- Free leaking requests on bad user passthrough commands (Keith)
- TCP error message fix (Maurizio)
- TCP corruption fix on partial PDU (Maurizio)
- TCP memory ordering fix for weakly ordered archs (Meir)
- Type coercion fix on message error for TCP (Dan)"
* tag 'nvme-6.14-2025-03-05' of git://git.infradead.org/nvme:
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme-tcp: Fix a C2HTermReq error message
nvmet: remove old function prototype
nvme-ioctl: fix leaked requests on mapping error
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
nvme-pci: clean up CMBMSC when registering CMB fails
nvme-tcp: fix possible UAF in nvme_tcp_poll
|
|
Use fault injection infrastructure to allow specific functions to
be configured over debugfs for failing during the execution of
xe_exec_queue_create_ioctl(). xe_exec_queue_destroy_ioctl() and
xe_exec_queue_get_property_ioctl() are not considered as there is
no unwinding code to test with fault injection.
This allows more thorough testing from user space by going through
code paths for error handling and unwinding which cannot be reached
by simply injecting errors in IOCTL arguments. This can help
increase code robustness.
The corresponding IGT series is:
https://patchwork.freedesktop.org/series/144138/
Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305150659.46276-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver")
Link: https://patch.msgid.link/20250304-mctp-i3c-null-v1-1-4416bbd56540@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix below inconsistent indenting smatch warning.
smatch warnings:
drivers/gpu/drm/gma500/cdv_device.c:218 cdv_errata() warn: inconsistent indenting
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305084911.6394-1-hanchunchao@inspur.com
|
|
strncpy() is deprecated for NUL-terminated destination buffers. Use
strscpy() instead and remove the manual NUL-termination.
Compile-tested only.
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250225203932.334123-1-thorsten.blum@linux.dev
|
|
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-11-tzimmermann@suse.de
|
|
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-10-tzimmermann@suse.de
|
|
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-9-tzimmermann@suse.de
|
|
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-8-tzimmermann@suse.de
|
|
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-7-tzimmermann@suse.de
|
|
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-6-tzimmermann@suse.de
|
|
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-5-tzimmermann@suse.de
|
|
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-4-tzimmermann@suse.de
|
|
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-3-tzimmermann@suse.de
|
|
Add drm_gem_is_imported() that tests if a GEM object's buffer has
been imported. Update the GEM code accordingly.
GEM code usually tests for imports if import_attach has been set
in struct drm_gem_object. But attaching a dma-buf on import requires
a DMA-capable importer device, which is not the case for many serial
busses like USB or I2C. The new helper tests if a GEM object's dma-buf
has been created from the GEM object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-2-tzimmermann@suse.de
|
|
The recent rewrite with the use of regular atomic helpers broke the
DPMS unblanking on X11. Fix it by moving the call of
bochs_hw_blank(false) from CRTC mode_set_nofb() to atomic_enable().
Fixes: 2037174993c8 ("drm/bochs: Use regular atomic helpers")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1238209
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304134203.20534-1-tiwai@suse.de
|
|
The return value of rio_add_net() should be checked. If it fails,
put_device() should be called to free the memory and give up the reference
initialized in rio_add_net().
Link: https://lkml.kernel.org/r/20250227041131.3680761-1-haoxiang_li2024@163.com
Fixes: e6b585ca6e81 ("rapidio: move net allocation into core code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
rio_add_net() calls device_register() and fails when device_register()
fails. Thus, put_device() should be used rather than kfree(). Add
"mport->net = NULL;" to avoid a use after free issue.
Link: https://lkml.kernel.org/r/20250227073409.3696854-1-haoxiang_li2024@163.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On MMIO devices (e.g. MT7988 or EN7581) unicast traffic received on lanX
port is flooded on all other user ports if the DSA switch is configured
without VLAN support since PORT_MATRIX in PCR regs contains all user
ports. Similar to MDIO devices (e.g. MT7530 and MT7531) fix the issue
defining default VLAN-ID 0 for MT7530 MMIO devices.
Fixes: 110c18bfed414 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20250304-mt7988-flooding-fix-v1-1-905523ae83e9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Somehow, possibly as a result of rebase gone badly, setting
nr_indexed_regs for pre-a650 a6xx devices lost the setting of
nr_indexed_regs, resulting in values getting snapshot, but omitted
from the devcoredump.
Fixes: e997ae5f45ca ("drm/msm/a6xx: Mostly implement A7xx gpu_state")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/640289/
|
|
The callback fb_probe in struct drm_fb_helper is unused. Remove it.
New drivers should set struct drm_driver.fbdev_probe instead and call
drm_client_setup() to instantiate in-kernel DRM clients.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-13-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
If fbdev support has been disabled, no output will be shown. Remove
the fbdev-related compile guard from the driver's debugfs code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-12-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Rework fbdev probing to support fbdev_probe in struct drm_driver
and remove the old fb_probe callback. Provide an initializer macro
that sets the callback in struct drm_driver according to the kernel
configuration. Call drm_client_setup_with_color_mode() to run the
kernel's default client setup for DRM.
This commit also prepares support for the kernel's drm_log client
(or any future client) in i915. Using drm_log will also require vmap
support in GEM objects.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-11-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Move fbdev code around in the source file before switching to DRM's
generic fbdev client. This will make the conversion less intrusive.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-10-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Store instances of drm_fb_helper and struct intel_fbdev separately.
This will allow i915 to use the common fbdev client, which allocates
its own instance of struct drm_fb_helper.
There is at most one instance of type each per DRM device, so both can
be referenced directly from the i915 and DRM device structures. A later
patchset might rework the common fbdev client to allow for storing
both, drm_fb_helper and intel_fbdev, together in the same place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-9-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
The value preferred_bpp in struct intel_fbdev duplicates preferred_bpp
in struct drm_fb_helper. Remove the former.
Instead let intel_fbdev_init_bios() read the framebuffer from the
hardware. Then derive preferred_bpp from its format and initialize
struct drm_fb_helper with the value. The default is 32 (i.e., XRGB8888).
Also removes one of those deprecated references to the cpp field of
struct drm_format_info.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212170913.185939-8-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
