summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-08-21dmaengine: idxd: Remove unused declarationsYue Haibing
Commit c05257b5600b ("dmanegine: idxd: open code the dsa_drv registration") removed idxd_{un}register_driver() definitions but not the declarations. Commit 034b3290ba25 ("dmaengine: idxd: create idxd_device sub-driver") declared idxd_{un}register_idxd_drv() but never implemented it. Commit 8f47d1a5e545 ("dmaengine: idxd: connect idxd to dmaengine subsystem") declared idxd_parse_completion_status() but never implemented it. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230817114135.50264-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-21Merge tag 'v6.5-p3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a regression in the caam driver and af_alg" * tag 'v6.5-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: fix uninit-value in af_alg_free_resources Revert "crypto: caam - adjust RNG timing to support more devices"
2023-08-21Merge tag 'amd-drm-next-6.6-2023-08-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.6-2023-08-18: amdgpu: - Panel replay fixes - Misc checkpatch fixes - SMU 13.x fixes - mcbp parameter handling fix for gfx9 - RAS fixes - Misc code cleanups - SR-IOV fixes - Expose both current and average power via hwmon if supported - DP retimer fix - Clockgating fix - Subvp fixes - DMCUB fixes - Gamut remap fix - Misc display fixes - Allow users to force runtime pm when displays are attached - Gracefully handle more partitions than drm nodes - S0ix fixes - GC 9.4.3 fixes amdkfd: - TBA fix for aldebaran - Fix build without CONFIG_DYNAMIC_DEBUG - memdup cleanup - Fix address watch clearing radeon: - Misc code cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230818195247.10981-1-alexander.deucher@amd.com
2023-08-20ublk: zoned: support REQ_OP_ZONE_RESET_ALLMing Lei
There isn't any reason to not support REQ_OP_ZONE_RESET_ALL given everything is actually handled in userspace, not mention it is pretty easy to support RESET_ALL. So enable REQ_OP_ZONE_RESET_ALL and let userspace handle it. Verified by 'tools/zbc_reset_zone -all /dev/ublkb0' in libzbc[1] with libublk-rs based ublk-zoned target prototype[2], follows command line for creating ublk-zoned: cargo run --example zoned -- add -1 1024 # add $dev_id $DEV_SIZE [1] https://github.com/westerndigitalcorporation/libzbc [2] https://github.com/ming1/libublk-rs/tree/zoned.v2 Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Andreas Hindborg <a.hindborg@samsung.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230810124326.321472-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-21Merge tag 'drm-misc-next-fixes-2023-08-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: * Add MMU dependency to TTM unit tests * panel: Fix Innolux G156HCE-L01 LVDS clock Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230817131832.GA9361@linux-uq9g
2023-08-20parisc: lasi: Register LASI power-off feature as sys_off_handlerHelge Deller
Prefer the Linux kernel sys_off_handler functionality over a home-grown implementation. Signed-off-by: Helge Deller <deller@gmx.de>
2023-08-20net: stmmac: Check more MAC HW features for XGMAC Core 3.20Furong Xu
1. XGMAC Core does not have hash_filter definition, it uses vlhash(VLAN Hash Filtering) instead, skip hash_filter when XGMAC. 2. Show exact size of Hash Table instead of raw register value. 3. Show full description of safety features defined by Synopsys Databook. 4. When safety feature is configured with no parity, or ECC only, keep FSM Parity Checking disabled. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: lan743x: Return PTR_ERR() for fixed_phy_register()Ruan Jinjie
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY, etc, in addition to -EIO. The Best practice is to return these error codes with PTR_ERR(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: bcmgenet: Return PTR_ERR() for fixed_phy_register()Ruan Jinjie
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY, etc, in addition to -ENODEV. The Best practice is to return these error codes with PTR_ERR(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: bgmac: Return PTR_ERR() for fixed_phy_register()Ruan Jinjie
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY, etc, in addition to -ENODEV. The best practice is to return these error codes with PTR_ERR(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next We need the serial-core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-20ipv4: fix data-races around inet->inet_idEric Dumazet
UDP sendmsg() is lockless, so ip_select_ident_segs() can very well be run from multiple cpus [1] Convert inet->inet_id to an atomic_t, but implement a dedicated path for TCP, avoiding cost of a locked instruction (atomic_add_return()) Note that this patch will cause a trivial merge conflict because we added inet->flags in net-next tree. v2: added missing change in drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c (David Ahern) [1] BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1: ip_select_ident_segs include/net/ip.h:542 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0: ip_select_ident_segs include/net/ip.h:541 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x184d -> 0x184e Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 ================================================================== Fixes: 23f57406b82d ("ipv4: avoid using shared IP generator for connected sockets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: validate veth and vxcan peer ifindexesJakub Kicinski
veth and vxcan need to make sure the ifindexes of the peer are not negative, core does not validate this. Using iproute2 with user-space-level checking removed: Before: # ./ip link add index 10 type veth peer index -1 # ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff 10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff -1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff Now: $ ./ip link add index 10 type veth peer index -1 Error: ifindex can't be negative. This problem surfaced in net-next because an explicit WARN() was added, the root cause is older. Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex") Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: dsa: realtek: add phylink_get_caps implementationRussell King (Oracle)
The user ports use RSGMII, but we don't have that, and DT doesn't specify a phy interface mode, so phylib defaults to GMII. These support 1G, 100M and 10M with flow control. It is unknown whether asymetric pause is supported at all speeds. The CPU port uses MII/GMII/RGMII/REVMII by hardware pin strapping, and support speeds specific to each, with full duplex only supported in some modes. Flow control may be supported again by hardware pin strapping, and theoretically is readable through a register but no information is given in the datasheet for that. So, we do a best efforts - and be lenient. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: bcmgenet: Fix return value check for fixed_phy_register()Ruan Jinjie
The fixed_phy_register() function returns error pointers and never returns NULL. Update the checks accordingly. Fixes: b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree") Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: bgmac: Fix return value check for fixed_phy_register()Ruan Jinjie
The fixed_phy_register() function returns error pointers and never returns NULL. Update the checks accordingly. Fixes: c25b23b8a387 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets") Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20RDMA/mlx5: Handles RoCE MACsec steering rules addition and deletionPatrisious Haddad
Add RoCE MACsec rules when a gid is added for the MACsec netdevice and handle their cleanup when the gid is removed or the MACsec SA is deleted. Also support alias IP for the MACsec device, as long as we don't have more ips than what the gid table can hold. In addition handle the case where a gid is added but there are still no SAs added for the MACsec device, so the rules are added later on when the SAs are added. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5: Add RoCE MACsec steering infrastructure in corePatrisious Haddad
Adds all the core steering helper functions that are needed in order to setup RoCE steering rules which includes both the RX and TX rules addition and deletion. As well as exporting the function to be ready to use from the IB driver where we expose functions to allow deletion of all rules, which is needed when a GID is deleted, or a deletion of a specific rule when an SA is deleted, and a similar manner for the rules addition. These functions are used in a later patch by IB driver to trigger the rules addition/deletion when needed. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5: Configure MACsec steering for ingress RoCEv2 trafficPatrisious Haddad
Add steering tables/rules to check if the decrypted traffic is RoCEv2, if so copy reg_b_metadata to a temp reg and forward it to RDMA_RX domain. The rules are added once the MACsec device is assigned an IP address where we verify that the packet ip is for MACsec device and that the temp reg has MACsec operation and a valid SCI inside. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5: Configure MACsec steering for egress RoCEv2 trafficPatrisious Haddad
Add steering table in RDMA_TX domain, to forward MACsec traffic to MACsec crypto table in NIC domain. The tables are created in a lazy manner when the first TX SA is being created, and destroyed upon the destruction of the last SA. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20IB/core: Reorder GID delete code for RoCEPatrisious Haddad
Reorder GID delete code so that the driver del_gid operation is executed before nullifying the gid attribute ndev parameter, this allows drivers to access the ndev during their gid delete operation, which makes more sense since they had access to it during the gid addition operation. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5: Add MACsec priorities in RDMA namespacesPatrisious Haddad
Add MACsec flow steering priorities in RDMA namespaces. This allows adding tables/rules to forward RoCEv2 traffic to the MACsec crypto tables in NIC_TX domain, and accept RoCEv2 traffic from NIC_RX domain. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20RDMA/mlx5: Implement MACsec gid addition and deletionPatrisious Haddad
Handle MACsec IP ambiguity issue, since mlx5 hw can't support programming both the MACsec and the physical gid when they have the same IP address, because it wouldn't know to whom to steer the traffic. Hence in such case we delete the physical gid from the hw gid table, which would then cause all traffic sent over it to fail, and we'll only be able to send traffic over the MACsec gid. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5: Maintain fs_id xarray per MACsec device inside macsec steeringPatrisious Haddad
Remove fs_id from the MACsec SA, since it has no real usage there and instead maintain with the MACsec steering data inside the core. Downstream patches requires this change to facilitate IB driver accesses to the fs_ids to avoid RoCE MACsec dependency on EN driver. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5: Remove netdevice from MACsec steeringPatrisious Haddad
Since MACsec steering was moved from ethernet private code to core, remove the netdevice from the MACsec steering, and use core device methods for error reporting instead. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5e: Move MACsec flow steering and statistics database from ethernet ↵Patrisious Haddad
to core Since now MACsec flow steering (macsec_fs) and MACsec statistics (stats) are maintained by the core driver, move their data as well to be saved inside core structures instead of staying part of ethernet MACsec database. In addition cleanup all MACsec stats functions from the ethernet MACsec code and move what's needed to be part of macsec_fs instead. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5e: Rename MACsec flow steering functions/parameters to suit core ↵Patrisious Haddad
naming style Rename MACsec flow steering(macsec_fs) functions and parameters from ethernet(core/en_accel) naming convention to core naming convention. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5: Remove dependency of macsec flow steering on ethernetPatrisious Haddad
Since macsec flow steering was moved to core, it should be independent of all ethernet code and structures hence we remove all ethernet header includes and redefine ethernet structs internally for macsec_fs usage where needed. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20net/mlx5e: Move MACsec flow steering operations to be used as core libraryPatrisious Haddad
Move MACsec flow steering operations(macsec_fs) from core/en_accel to core/lib, this mandates moving MACsec statistics structure from the general MACsec code header(en_accel/macsec.h) to macsec_fs header to remove macsec_fs.h dependency over en_accel/macsec.h. This to lay the ground for RoCE MACsec by moving all the data that will need to be accessed by both ethernet MACsec and RoCE MACsec to be shared at core. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20macsec: add functions to get macsec real netdevice and check offloadPatrisious Haddad
Given a macsec net_device add two functions to return the real net_device for that device, and check if that macsec device is offloaded or not. This is needed for auxiliary drivers that implement MACsec offload, but have flows which are triggered over the macsec net_device, this allows the drivers in such cases to verify if the device is offloaded or not, and to access the real device of that macsec device, which would belong to the driver, and would be needed for the offload procedure. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-08-20Merge tag 'tty-6.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial core fixes for 6.5-rc7 that resolve a lot of reported issues. Primarily in here are the fixes for the serial bus code from Tony that came in -rc1, as it hit wider testing with the huge number of different types of systems and serial ports. All of the reported issues with duplicate names and other issues with this code are now resolved. Other than that included in here is: - n_gsm fix for a previous fix - 8250 lockdep annotation fix - fsl_lpuart serial driver fix - TIOCSTI documentation update for previous CAP_SYS_ADMIN change All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: core: Fix serial core port id, including multiport devices serial: 8250: drop lockdep annotation from serial8250_clear_IER() tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux serial: core: Revert port_id use TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig serial: 8250: Fix oops for port->pm on uart_change_pm() serial: 8250: Reinit port_id when adding back serial8250_isa_devs serial: core: Fix kmemleak issue for serial core device remove MAINTAINERS: Merge TTY layer and serial drivers serial: core: Fix serial_base_match() after fixing controller port name serial: core: Fix serial core controller port name to show controller id serial: core: Fix serial core port id to not use port->line serial: core: Controller id cannot be negative tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
2023-08-19auxdisplay: hd44780: move cursor home after clear display commandHugo Villeneuve
The DISPLAY_CLEAR command on the NewHaven NHD-0220DZW-AG5 display does NOT change the DDRAM address to 00h (home position) like the standard Hitachi HD44780 controller. As a consequence, the starting position of the initial string LCD_INIT_TEXT is not guaranteed to be at 0,0 depending on where the cursor was before the DISPLAY_CLEAR command. Extract of DISPLAY_CLEAR command from datasheets of: Hitachi HD44780: ... It then sets DDRAM address 0 into the address counter... NewHaven NHD-0220DZW-AG5 datasheet: ... This instruction does not change the DDRAM Address Move the cursor home after sending DISPLAY_CLEAR command to support non-standard LCDs. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: David Reaver <me@davidreaver.com> Link: https://lore.kernel.org/r/20230722180925.1408885-1-hugo@hugovil.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-08-19net: microchip: sparx5: Update return value check for vcap_get_rule()Ruan Jinjie
As Simon Horman suggests, update vcap_get_rule() to always return an ERR_PTR() and update the error detection conditions to use IS_ERR(), so use IS_ERR() to check the return value. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: lan966x: Fix return value check for vcap_get_rule()Ruan Jinjie
As Simon Horman suggests, update vcap_get_rule() to always return an ERR_PTR() and update the error detection conditions to use IS_ERR(), so use IS_ERR() to fix the return value issue. Fixes: 72df3489fb10 ("net: lan966x: Add ptp trap rules") Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: microchip: vcap api: Always return ERR_PTR for vcap_get_rule()Ruan Jinjie
As Simon Horman suggests, update vcap_get_rule() to always return an ERR_PTR() and update the error detection conditions to use IS_ERR(), which would be more cleaner in this case. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: phy: Fix deadlocking in phy_error() invocationSerge Semin
Since commit 91a7cda1f4b8 ("net: phy: Fix race condition on link status change") all the phy_error() method invocations have been causing the nested-mutex-lock deadlock because it's normally done in the PHY-driver threaded IRQ handlers which since that change have been called with the phydev->lock mutex held. Here is the calls thread: IRQ: phy_interrupt() +-> mutex_lock(&phydev->lock); <--------------------+ drv->handle_interrupt() | Deadlock due +-> ERROR: phy_error() + to the nested +-> phy_process_error() | mutex lock +-> mutex_lock(&phydev->lock); <-+ phydev->state = PHY_ERROR; mutex_unlock(&phydev->lock); mutex_unlock(&phydev->lock); The problem can be easily reproduced just by calling phy_error() from any PHY-device threaded interrupt handler. Fix it by dropping the phydev->lock mutex lock from the phy_process_error() method and printing a nasty error message to the system log if the mutex isn't held in the caller execution context. Note for the fix to work correctly in the PHY-subsystem itself the phydev->lock mutex locking must be added to the phy_error_precise() function. Link: https://lore.kernel.org/netdev/20230816180944.19262-1-fancer.lancer@gmail.com Fixes: 91a7cda1f4b8 ("net: phy: Fix race condition on link status change") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: mdio: xgene: remove useless xgene_mdio_statusRussell King (Oracle)
xgene_mdio_status is declared static, and is only written once by the driver. It appears to have been this way since the driver was first added to the kernel tree. No other users can be found, so let's remove it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19stmmac: intel: Enable correction of MAC propagation delayKurt Kanzenbach
All captured timestamps should be corrected by PHY, MAC and CDC introduced latency/errors. The CDC correction is already used. Enable MAC propagation delay correction as well which is available since commit 26cfb838aa00 ("net: stmmac: correct MAC propagation delay"). Before: |ptp4l[390.458]: rms 7 max 21 freq +177 +/- 14 delay 357 +/- 1 After: |ptp4l[620.012]: rms 7 max 20 freq +195 +/- 14 delay 345 +/- 1 Tested on Intel Elkhart Lake. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Johannes Zink <j.zink@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: sfp: handle 100G/25G active optical cables in sfp_parse_supportJosua Mayer
Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC) for active optical cables supporting 25G and 100G speeds. Since the specification makes no statement about transmitter range, and as the specific sfp module that had been tested features only 2m fiber - short-range (SR) modes are selected. The 100G speed is irrelevant because it would require multiple fibers / multiple SFP28 modules combined under one netdev. sfp-bus.c only handles a single module per netdev, so only 25Gbps modes are selected. sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR with compatible properties, however that entry is a contradiction in itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely be a mode for qsfp modules only. Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r interface mode and 25000baseSR link mode. Also enforce SFP28 bitrate limits on the values read from sfp eeprom as requested by Russell King. Tested with fs.com S28-AO02 AOC SFP28 module. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19Merge tag 'i2c-for-6.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Usual set of driver fixes. A bit more than usual because I was unavailable for a while" * tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue i2c: Update documentation to use .probe() again i2c: sun6i-p2wi: Fix an error message in probe() i2c: hisi: Only handle the interrupt of the driver's transfer i2c: tegra: Fix i2c-tegra DMA config option processing i2c: tegra: Fix failure during probe deferral cleanup i2c: designware: Handle invalid SMBus block data response length value i2c: designware: Correct length byte validation logic i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
2023-08-19RDMA/irdma: Prevent zero-length STAG registrationChristopher Bednarz
Currently irdma allows zero-length STAGs to be programmed in HW during the kernel mode fast register flow. Zero-length MR or STAG registration disable HW memory length checks. Improve gaps in bounds checking in irdma by preventing zero-length STAG or MR registrations except if the IB_PD_UNSAFE_GLOBAL_RKEY is set. This addresses the disclosure CVE-2023-25775. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Christopher Bednarz <christopher.n.bednarz@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230818144838.1758-1-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-19Merge tag 'fbdev-for-6.5-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and cleanups from Helge Deller: - various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and goldfishfb * tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: goldfishfb: Do not check 0 for platform_get_irq() fbdev: atmel_lcdfb: Remove redundant of_match_ptr() fbdev: kyro: Remove unused declarations fbdev: ssd1307fb: Print the PWM's label instead of its number fbdev: mmp: fix value check in mmphw_probe() fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
2023-08-19watchdog: sama5d4: readout initial stateMathieu Othacehe
Readout the AT91_WDT_MR bit at probe so that it becomes possible to get the pre-userspace handler working. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230819084726.11037-1-othacehe@gnu.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-loadRaag Jadav
When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver needs to be loaded manually, for the lack of module alias. This causes unintended resets in cases where watchdog timer is set-up by bootloader and the driver is not explicitly loaded. Add MODULE_ALIAS() to load the driver automatically at boot and avoid this issue. Fixes: 87a1ef8058d9 ("watchdog: add Intel MID watchdog driver support") Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230811120220.31578-1-raag.jadav@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: core: stop watchdog when executing poweroff commandMeng Li
On some platforms, for example, Intel SoC FPGA platform, the watchdog is started in u-boot, and so kernel will create a timer and work to keep watchdog alive. But when user executes commands "poweroff" or "shutdown -h", the system is reset when watchdog triggers timeout even if WDOG_STOP_ON_REBOOT is set in watchdog driver. The root cause is that the watchdog is not stopped properly because the SYS_POWER_OFF case is not supported in notify callback function. So, add this case to stop watchdog when executing poweroff command. Signed-off-by: Meng Li <Meng.Li@windriver.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230814090616.1853263-1-Meng.Li@windriver.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: pm8916_wdt: Remove redundant of_match_ptr()Ruan Jinjie
The driver depends on CONFIG_OF, it is not necessary to use of_match_ptr() here. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230811062707.2301583-1-ruanjinjie@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: xilinx_wwdt: Use div_u64() in xilinx_wwdt_start()Nathan Chancellor
After commit f1a43aadb5a6 ("watchdog: Enable COMPILE_TEST for more drivers"), it is possible to enable this driver on 32-bit architectures. When building for those architectures with clang, there is an error due to a 64-bit division in xilinx_wwdt_start(): ERROR: modpost: "__aeabi_uldivmod" [drivers/watchdog/xilinx_wwdt.ko] undefined! Use div_u64() to fix this, which takes a 64-bit dividend and 32-bit divisor. GCC likely avoids the same error due to optimizations it employs to transform division by a constant into other equivalent operations, which may be different than what is implemented in clang. Link: https://github.com/ClangBuiltLinux/linux/issues/1915 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230815-watchdog-xilinx-div_u64-v1-1-20b0b5a65c2e@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19Merge tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Main thing here is the fix for the regression in flush handling which caused IO hangs/stalls for a few reporters. Hopefully that should all be sorted out now. Outside of that, just a few minor fixes for issues that were introduced in this cycle" * tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux: blk-mq: release scheduler resource when request completes blk-crypto: dynamically allocate fallback profile blk-cgroup: hold queue_lock when removing blkg->q_node drivers/rnbd: restore sysfs interface to rnbd-client
2023-08-19watchdog: starfive: Remove #ifdef guards for PM related functionsPaul Cercueil
Use the new PM macros for the suspend and resume functions to be automatically dropped by the compiler when CONFIG_PM or CONFIG_PM_SLEEP are disabled, without having to use #ifdef guards. This has the advantage of always compiling these functions in, independently of any Kconfig option. Thanks to that, bugs and other regressions are subsequently easier to catch. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230706082928.10869-1-paul@crapouillou.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2023-08-19watchdog: s3c2410: Fix potential deadlock on &wdt->lockChengfeng Ye
As &wdt->lock is acquired by hard irq s3c2410wdt_irq(), other acquisition of the same lock under process context should disable irq, otherwise deadlock could happen if the irq preempt the execution while the lock is held in process context on the same CPU. [Deadlock Scenario] s3c2410wdt_suspend() -> s3c2410wdt_stop() -> spin_lock(&wdt->lock) <irq iterrupt> -> s3c2410wdt_irq() -> s3c2410wdt_keepalive() -> spin_lock(&wdt->lock) (deadlock here) [Deadlock Scenario] s3c2410wdt_probe() -> s3c2410wdt_start() -> spin_lock(&wdt->lock) <irq iterrupt> -> s3c2410wdt_irq() -> s3c2410wdt_keepalive() -> spin_lock(&wdt->lock) (deadlock here) [Deadlock Scenario] s3c2410wdt_keepalive() -> spin_lock(&wdt->lock) <irq iterrupt> -> s3c2410wdt_irq() -> s3c2410wdt_keepalive() -> spin_lock(&wdt->lock) (deadlock here) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock, which reported the above warning when analyzing the linux kernel 6.4-rc7 release. The tentative patch fix the potential deadlock by spin_lock_irqsave() under process context. Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230705090951.63762-1-dg573847474@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit (git 2.34.1) at 2025-09-18 12:12:37 +0000