summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-03-20drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()'Christophe JAILLET
If we can not allocate the HDMI encoder regmap, we still need to free some resources before returning. Fixes: 4b1c924b1fc1 ("drm/sun4i: hdmi: create a regmap for later use") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/14c42391e1b562c7495bda6ad6fa1d24ec8dc052.1521413031.git.christophe.jaillet@wanadoo.fr
2018-03-20brcmfmac: Fix check for ISO3166 codeStefan Wahren
The commit "regulatory: add NUL to request alpha2" increases the length of alpha2 to 3. This causes a regression on brcmfmac, because brcmf_cfg80211_reg_notifier() expect valid ISO3166 codes in the complete array. So fix this accordingly. Fixes: 657308f73e67 ("regulatory: add NUL to request alpha2") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-20cpufreq: scpi: Add thermal dependencyArnd Bergmann
A built-in scpi cpufreq driver cannot link against a modular thermal framework: drivers/cpufreq/scpi-cpufreq.o: In function `scpi_cpufreq_ready': scpi-cpufreq.c:(.text+0x4c): undefined reference to `of_cpufreq_cooling_register' drivers/cpufreq/scpi-cpufreq.o: In function `scpi_cpufreq_exit': scpi-cpufreq.c:(.text+0x9c): undefined reference to `cpufreq_cooling_unregister' This adds a Kconfig dependency that makes sure this configuration is not possible, while allowing all configurations that can work. Note that disabling CPU_THERMAL means we don't care about the THERMAL dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure pathChunyu Hu
Kmemleak reported the below leak. When cppc_cpufreq_init went into failure path, the cpu mask is not freed. After fix, this report is gone. And to avaoid potential NULL pointer reference, check the cpu value first. unreferenced object 0xffff800fd5ea4880 (size 128): comm "swapper/0", pid 1, jiffies 4294939510 (age 668.680s) hex dump (first 32 bytes): 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 .... ........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffff0000082c4ae4>] __kmalloc_node+0x278/0x634 [<ffff0000088f4a74>] alloc_cpumask_var_node+0x28/0x60 [<ffff0000088f4af0>] zalloc_cpumask_var+0x14/0x1c [<ffff000008d20254>] cppc_cpufreq_init+0xd0/0x19c [<ffff000008083828>] do_one_initcall+0xec/0x15c [<ffff000008cd1018>] kernel_init_freeable+0x1f4/0x2a4 [<ffff0000089099b0>] kernel_init+0x18/0x10c [<ffff000008084d50>] ret_from_fork+0x10/0x18 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Chunyu Hu <chuhu@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5EHans de Goede
Just like many other Samsung models, the 670Z5E needs to use the acpi-video backlight interface rather then the native one for backlight control to work, add a quirk for this. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1557060 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20ACPI: Add Time and Alarm Device (TAD) driverRafael J. Wysocki
Introduce a driver for the ACPI Time and Alarm Device (TAD) based on Section 9.18 of ACPI 6.2. This driver only supports the system wakeup capabilities of the TAD which are mandatory. Support for the RTC capabilities of the TAD will be added to it in the future. This driver is entirely sysfs-based. It provides attributes (under the TAD platform device) to allow user space to manage the AC and DC wakeup timers of the TAD: set and read their values, set and check their expire timer wake policies, check and clear their status and check the capabilities of the TAD reported by AML. The DC timer attributes are only present if the TAD supports a separate DC alarm timer. The wakeup events handling and power management of the TAD is expected to be taken care of by the ACPI PM domain attached to its platform device. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-03-20ACPI / scan: Send change uevent with offine environmental dataLee, Chun-Yi
In current design of ACPI container offline, Kernel emits KOBJ_CHANGE uevent to user space to indidate that the ejection of the container was triggered by platform. (caa73ea15 patch) A pure KOBJ_CHANGE uevent is not enough for user space to identify the purpose. For example, a "udevadm trigger" command can also be used to emit change event to all udev rules. A udev rule can not identify that the event is from kernel for offline or from udevadm for other purpose. Then the offline action in udev rule may also be triggered by udevadm tool. So, similar to the change uevent of dock, kernel sends the KOBJ_CHANGE uevent with a offline environmental data to indicate purpose. It's useful by udev rule for using ENV{EVENT} filter. Acked-by: Michal Hocko <mhocko@suse.com> Tested-by: Michal Hocko <mhocko@suse.com> Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20ACPI / PM: Allow deeper wakeup power states with no _SxD nor _SxWDaniel Drake
acpi_dev_pm_get_state() is used to determine the range of allowable device power states when going into S3 suspend. This is implemented by executing the _S3D and _S3W ACPI methods. Linux follows the ACPI spec behaviour in that when _S3D is implemented and _S3W is not, Linux will not go into a power state deeper than the one returned by _S3D for a wakeup-enabled device. However, this same logic is being applied to the case when neither _S3D nor _S3W are present, and the result is that this function decides that the device must stay in D0 (fully on) state. This is breaking USB wakeups on Asus V222GA and Acer XC-830. _S3D and _S3W are not present, so the USB controller is left in the D0 running state during S3, and hence it is unable to generate a PME# wake event. The ACPI spec is unclear on which power states are permissable for wakeup-enabled devices when both _S3D and _S3W are missing. However, USB wakeups work fine on these platforms under Windows, where device manager shows that they are using D3 device state for the USB controller in S3. I assume that the "max = min" clamping done by the code here is specifically written for the _S3D but no _S3W case. By making the code true to those conditions, avoiding them on these platforms, the controller will be put into D3 state and USB wakeups start working. Additionally I feel that this change makes the code more directly mirror the wording of the ACPI spec and it's associated lack of clarity. Thanks to Mathias Nyman for pointing us in the right direction. Signed-off-by: Daniel Drake <drake@endlessm.com> Link: http://lkml.kernel.org/r/CAB4CAwf_k-WsF3zL4epm9TKAOu0h=Bv1XhXV_gY3bziOo_NPKA@mail.gmail.com https://phabricator.endlessm.com/T21410 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up ↵Christoph Hellwig
intel_{alloc,free}_coherent() Use the dma_direct_*() helpers and clean up the code flow. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-9-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and dma_direct_{alloc,free}()Christoph Hellwig
This cleans up the code a lot by removing duplicate logic. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-8-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y)Christoph Hellwig
The generic DMA-direct (CONFIG_DMA_DIRECT_OPS=y) implementation is now functionally equivalent to the x86 nommu dma_map implementation, so switch over to using it. That includes switching from using x86_dma_supported in various IOMMU drivers to use dma_direct_supported instead, which provides the same functionality. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-4-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20x86/dma: Remove dma_alloc_coherent_mask()Christoph Hellwig
These days all devices (including the ISA fallback device) have a coherent DMA mask set, so remove the workaround. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-3-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20spi: Fix unregistration of controller with fixed SPI bus numberJarkko Nikula
Commit 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) ceased to unregister SPI buses with fixed bus numbers. Moreover this is visible only if CONFIG_SPI_DEBUG=y is set or when trying to re-register the same SPI controller. rmmod spi_pxa2xx_platform (with CONFIG_SPI_DEBUG=y): [ 26.788362] spi_master spi1: attempting to delete unregistered controller [spi1] modprobe spi_pxa2xx_platform: [ 37.883137] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:19.0/pxa2xx-spi.12/spi_master/spi1' [ 37.894984] CPU: 1 PID: 1467 Comm: modprobe Not tainted 4.16.0-rc4+ #21 [ 37.902384] Call Trace: ... [ 38.122680] kobject_add_internal failed for spi1 with -EEXIST, don't try to register things with the same name in the same directory. [ 38.136154] WARNING: CPU: 1 PID: 1467 at lib/kobject.c:238 kobject_add_internal+0x2a5/0x2f0 ... [ 38.513817] pxa2xx-spi pxa2xx-spi.12: problem registering spi master [ 38.521036] pxa2xx-spi: probe of pxa2xx-spi.12 failed with error -17 Fix this by not returning immediately from spi_unregister_controller() if idr_find() doesn't find controller with given ID/bus number. It finds only those controllers that were registered with dynamic SPI bus numbers. Only conditional cleanup between dynamic and fixed bus numbers is to remove allocated IDR. Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) Cc: stable@vger.kernel.org Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-20sched/wait, drivers/media: Convert wait_on_atomic_t() usage to the new ↵Peter Zijlstra
wait_var_event() API The old wait_on_atomic_t() is going to get removed, use the more flexible wait_var_event() API instead. Unlike wake_up_atomic_t(), wake_up_var() will issue the wakeup even if the variable is not 0. No change in functionality. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new ↵Peter Zijlstra
wait_var_event() API The old wait_on_atomic_t() is going to get removed, use the more flexible wait_var_event() API instead. Unlike wake_up_atomic_t(), wake_up_var() will issue the wakeup even if the variable is not 0. No change in functionality. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-19scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabledJianchao Wang
iscsi tcp will first send out data, then calculate and send data digest. If we don't have BDI_CAP_STABLE_WRITES, the page cache will be written in spite of the on going writeback. Consequently, wrong digest will be got and sent to target. To fix this, set BDI_CAP_STABLE_WRITES when data digest is enabled in iscsi_tcp .slave_configure callback. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Acked-by: Chris Leech <cleech@redhat.com> Acked-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: sd: Remember that READ CAPACITY(16) succeededMartin K. Petersen
The USB storage glue sets the try_rc_10_first flag in an attempt to avoid wedging poorly implemented legacy USB devices. If the device capacity is too large to be expressed in the provided response buffer field of READ CAPACITY(10), a well-behaved device will set the reported capacity to 0xFFFFFFFF. We will then attempt to issue a READ CAPACITY(16) to obtain the real capacity. Since this part of the discovery logic is not covered by the first_scan flag, a warning will be printed a couple of times times per revalidate attempt if we upgrade from READ CAPACITY(10) to READ CAPACITY(16). Remember that we have successfully issued READ CAPACITY(16) so we can take the fast path on subsequent revalidate attempts. Reported-by: Menion <menion@gmail.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-20regulator: giving regulator controlling gpios a non-empty label when used ↵Nicholas Lowell
through the devicetree. When the label is empty, it causes missing information and limits diagnostics for instances such as 'cat /sys/kernel/debug/gpio' Setting the label to the regulator supply_name will point to the device using the gpio(s). Signed-off-by: Nicholas Lowell <nlowell@lexmark.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-19net: phy: relax error checking when creating sysfs link netdev->phydevGrygorii Strashko
Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per one netdevice, as result such drivers will produce warning during system boot and fail to connect second phy to netdevice when PHYLIB framework will try to create sysfs link netdev->phydev for second PHY in phy_attach_direct(), because sysfs link with the same name has been created already for the first PHY. As result, second CPSW external port will became unusable. Fix it by relaxing error checking when PHYLIB framework is creating sysfs link netdev->phydev in phy_attach_direct(), suppressing warning by using sysfs_create_link_nowarn() and adding error message instead. After this change links (phy->netdev and netdev->phy) creation failure is not fatal any more and system can continue working, which fixes TI CPSW issue. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20spi: rspi: use correct enum for DMA transfer directionStefan Agner
Use enum dma_transfer_direction as required by dmaengine_prep_slave_sg instead of enum dma_data_direction. This won't change behavior in practice as the enum values are equivalent. This fixes two warnings when building with clang: drivers/spi/spi-rspi.c:538:26: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] rx->sgl, rx->nents, DMA_FROM_DEVICE, ^~~~~~~~~~~~~~~ drivers/spi/spi-rspi.c:558:26: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] tx->sgl, tx->nents, DMA_TO_DEVICE, ^~~~~~~~~~~~~ Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-19drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.Dhinakaran Pandiyan
If bios sets up an MST output and hardware state readout code sees this is an SST configuration, when disabling the encoder we end up calling ->post_disable_dp() hook instead of the MST version. Consequently, we write to the DP_SET_POWER dpcd to set it D3 state. Further along when we try enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up the MST hub. This results in continuous link training failures which keep the system busy delaying boot. We could identify bios MST boot discrepancy and handle it accordingly but a simple way to solve this is to write to the DP_SET_POWER dpcd for MST too. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: 5ea2355a100a ("drm/i915/mst: Use MST sideband message transactions for dpms control") Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com (cherry picked from commit ad260ab32a4d94fa974f58262f8000472d34fd5b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-19ACPI / watchdog: Fix off-by-one error at resource assignmentTakashi Iwai
The resource allocation in WDAT watchdog has off-one-by error, it sets one byte more than the actual end address. This may eventually lead to unexpected resource conflicts. Fixes: 058dfc767008 (ACPI / watchdog: Add support for WDAT hardware watchdog) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-19Merge branch 'for-4.16-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "I sat on them too long and it's quite a few this late, but nothing has a wide blast area. The changes are... - Fix corner cases in SG command handling. - Recent introduction of default powersaving mode config option exposed several devices with broken powersaving behaviors. A number of patches to update the blacklist accordingly. - Fix a kernel panic on SAS hotplug. - Other misc and device specific updates" * 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs libata: Enable queued TRIM for Samsung SSD 860 PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L ahci: Add PCI-id for the Highpoint Rocketraid 644L card ata: do not schedule hot plug if it is a sas host libata: disable LPM for Crucial BX100 SSD 500GB drive libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs libata: update documentation for sysfs interfaces ata: sata_rcar: Remove unused variable in sata_rcar_init_controller() libata: transport: cleanup documentation of sysfs interface sata_rcar: Reset SATA PHY when Salvator-X board resumes libata: don't try to pass through NCQ commands to non-NCQ devices libata: remove WARN() for DMA or PIO command without data libata: fix length validation of ATAPI-relayed SCSI commands ata: libahci: fix comment indentation ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine() libata: Fix compile warning with ATA_DEBUG enabled
2018-03-19drm/sun4i: backend: Support YUV planesMaxime Ripard
Now that we have the guarantee that we will have only a single YUV plane, actually support them. The way it works is not really straightforward, since we first need to enable the YUV mode in the plane that we want to setup, and then we have a few registers to setup the YUV buffer and parameters. We also need to setup the color correction to actually have something displayed. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/66088c1398bd3189123f28a89a7ccc669fe9f296.1519931807.git-series.maxime.ripard@bootlin.com
2018-03-19RDMA/ucma: Fix use-after-free access in ucma_closeLeon Romanovsky
The error in ucma_create_id() left ctx in the list of contexts belong to ucma file descriptor. The attempt to close this file descriptor causes to use-after-free accesses while iterating over such list. Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <syzbot+dcfd344365a56fbebd0f@syzkaller.appspotmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19power: reset: at91-reset: Switch from the pr_*() to the dev_*() logging ↵Ladislav Michl
functions Use dev_info() instead of pr_info(). Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-19power: reset: at91-poweroff: Remove redundant dev_err call in ↵Ladislav Michl
at91_poweroff_probe() There is an error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundancy. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-19power: reset: at91-poweroff: Switch from the pr_*() to the dev_*() logging ↵Ladislav Michl
functions Use dev_info() instead of pr_info(). Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-19Merge tag 'v4.16-rc6' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-19drm/amd/pp: Remove unneeded void * casts for Vega10Rex Zhu
Removes unneeded void * casts for the following pointers: hwmgr->backend hwmgr->smu_backend Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19drm/amd/pp: Delete get_xclk function in powerplay (v2)Rex Zhu
use asic's callback function get_xclk in amdgpu v2: squash in removal of leftover debug info (drm/amd/pp: Delete debug info in smu7_hwmgr.c) (Rex) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19drm/amd/pp: Clean up header file for Vega10Rex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19drm/amd/pp: Move functions to smu backend table for vega10Rex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19drm/amd/pp: Mark bunches of functins in vega10_smumgr.c staticRex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19drm/amd/pp: Remove dead functions in vega10_smumgr.cRex Zhu
use smc_table_manager function to copy/save tables to/from smu. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19drm/amdgpu: Delete dead code when early initRex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19i40e: Fix the polling mechanism of GLGEN_RSTAT.DEVSTATEPaweł Jabłoński
This fixes the polling mechanism of GLGEN_RSTAT.DEVSTATE in the PF Reset path when Global Reset is in progress. While the driver is polling for the end of the PF Reset and the Global Reset is triggered, abandon the PF Reset path and prepare for the upcoming Global Reset. Signed-off-by: Paweł Jabłoński <pawel.jablonski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40evf: remove flags that are never usedJacob Keller
These flags were defined, but there is no use within the driver code, so we don't need to keep them. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Prevent setting link speed on I40E_DEV_ID_25G_BPatryk Małek
Setting link settings on backplane devices shouldn't be allowed. This patch adds one more device id to the list which we check that against. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Fix incorrect return typesDoug Dziggel
Fix return types from i40e_status to enum i40e_status_code. Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: add doxygen comment for new mode parameterJacob Keller
A recent patch updated the signature for i40e_aq_set_switch_config() to add a new parameter 'mode'. It forgot to document the parameter in the doxygen function header comment. Add the parameter to the function description now. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Close client on suspend and restore client MSIx on resumeShiraz Saleem
During suspend client MSIx vectors are freed while they are still in use causing a crash on entering S3. Fix this calling client close before freeing up its MSIx vectors. Also update the client MSIx vectors on resume before client open is called. Fixes commit b980c0634fe5 ("i40e: shutdown all IRQs and disable MSI-X when suspended") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Prevent setting link speed on KX_X722Patryk Małek
Setting link settings on backplane devices shouldn't be allowed. This patch adds one more device id to the list which we check that against. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40e: Properly check allowed advertisement capabilitiesJan Sokolowski
The i40e_set_link_ksettings and i40e_get_link_ksettings use different codepaths to check available and supported advertisement modes. This creates scenarios where it's possible to set a mode that's not allowed, resulting in a link down. Fix setting advertisement in i40e_set_link_ksettings by calling i40e_get_link_ksettings to check what modes are allowed. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19i40evf: Reorder configure_clsflower to avoid deadlock on errorAlexander Duyck
While doing some code review I noticed that we can get into a state where we exit with the "IN_CRITICAL_TASK" bit set while notifying the PF of flower filters. This patch is meant to address that plus tweak the ordering of the while loop waiting on it slightly so that we don't wait an extra period after we have failed for the last time. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-19clk: bcm2835: Protect sections updating shared registersBoris Brezillon
CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock handlers and must be accessed with ->regs_lock held. Update the sections where this protection is missing. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19clk: bcm2835: Fix ana->maskX definitionsBoris Brezillon
ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove the '~' in the definition to fix ANA setup. Note that this commit fixes a long standing bug preventing one from using an HDMI display if it's plugged after the FW has booted Linux. This is because PLLH is used by the HDMI encoder to generate the pixel clock. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19drm/amd/display: fix dereferencing possible ERR_PTR()Shirish S
This patch fixes static checker warning caused by "36cc549d5986: "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19drm/amd/display: Refine disable VGAClark Zheng
bad case won't follow normal sense, it will not enable vga1 as usual, but vga2,3,4 is on. Signed-off-by: Clark Zheng <clark.zheng@amd.com> Reviewed-by: Tony Cheng <tony.cheng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-19libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 versionHans de Goede
When commit 9c7be59fc519af ("libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev to "MU01", where as the entry adding the NOLPM quirk sets it to NULL. This means that after this commit we no apply the NO_NCQ_TRIM quirk to all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02" firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2 quirks, one for the "MU01" firmware and one for all other firmware versions, so that we once again only apply the NO_NCQ_TRIM quirk to the "MU01" firmware version. Fixes: 9c7be59fc519af ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-03 14:47:26 +0000