| Age | Commit message (Collapse) | Author |
|---|
|
Commit 3e453522593d ("md: Free resources in __md_stop") tried to fix
null-ptr-deference for 'active_io' by moving percpu_ref_exit() to
__md_stop(), however, the commit also moving 'writes_pending' to
__md_stop(), and this will cause mdadm tests broken:
BUG: kernel NULL pointer dereference, address: 0000000000000038
Oops: 0000 [#1] PREEMPT SMP
CPU: 15 PID: 17830 Comm: mdadm Not tainted 6.3.0-rc3-next-20230324-00009-g520d37
RIP: 0010:free_percpu+0x465/0x670
Call Trace:
<TASK>
__percpu_ref_exit+0x48/0x70
percpu_ref_exit+0x1a/0x90
__md_stop+0xe9/0x170
do_md_stop+0x1e1/0x7b0
md_ioctl+0x90c/0x1aa0
blkdev_ioctl+0x19b/0x400
vfs_ioctl+0x20/0x50
__x64_sys_ioctl+0xba/0xe0
do_syscall_64+0x6c/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
And the problem can be reporduced 100% by following test:
mdadm -CR /dev/md0 -l1 -n1 /dev/sda --force
echo inactive > /sys/block/md0/md/array_state
echo read-auto > /sys/block/md0/md/array_state
echo inactive > /sys/block/md0/md/array_state
Root cause:
// start raid
raid1_run
mddev_init_writes_pending
percpu_ref_init
// inactive raid
array_state_store
do_md_stop
__md_stop
percpu_ref_exit
// start raid again
array_state_store
do_md_run
raid1_run
mddev_init_writes_pending
if (mddev->writes_pending.percpu_count_ptr)
// won't reinit
// inactive raid again
...
percpu_ref_exit
-> null-ptr-deference
Before the commit, 'writes_pending' is exited when mddev is freed, and
it's safe to restart raid because mddev_init_writes_pending() already make
sure that 'writes_pending' will only be initialized once.
Fix the prblem by moving 'writes_pending' back, it's a litter hard to find
the relationship between alloc memory and free memory, however, code
changes is much less and we lived with this for a long time already.
Fixes: 3e453522593d ("md: Free resources in __md_stop")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230328094400.1448955-1-yukuai1@huaweicloud.com
|
|
The drm_buddy_test KUnit tests verify that returned blocks have sizes
which are powers of two using is_power_of_2(). However, is_power_of_2()
operations on a 'long', but the block size is a u64. So on systems where
long is 32-bit, this can sometimes fail even on correctly sized blocks.
This only reproduces randomly, as the parameters passed to the buddy
allocator in this test are random. The seed 0xb2e06022 reproduced it
fine here.
For now, just hardcode an is_power_of_2() implementation using
x & (x - 1).
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arunpravin Paneer Selvam <arunpravin.paneerselvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329065532.2122295-2-davidgow@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
The drm buddy allocator tests were broken on 32-bit systems, as
rounddown_pow_of_two() takes a long, and the buddy allocator handles
64-bit sizes even on 32-bit systems.
This can be reproduced with the drm_buddy_allocator KUnit tests on i386:
./tools/testing/kunit/kunit.py run --arch i386 \
--kunitconfig ./drivers/gpu/drm/tests drm_buddy
(It results in kernel BUG_ON() when too many blocks are created, due to
the block size being too small.)
This was independently uncovered (and fixed) by Luís Mendes, whose patch
added a new u64 variant of rounddown_pow_of_two(). This version instead
recalculates the size based on the order.
Reported-by: Luís Mendes <luis.p.mendes@gmail.com>
Link: https://lore.kernel.org/lkml/CAEzXK1oghXAB_KpKpm=-CviDQbNaH0qfgYTSSjZgvvyj4U78AA@mail.gmail.com/T/
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <arunpravin.paneerselvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329065532.2122295-1-davidgow@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
After entering 6.3-rc1 the LLC cacheinfo is not exported on our ACPI
based arm64 server. This is because the LLC cacheinfo is partly reset
when secondary CPUs boot up. On arm64 the primary cpu will allocate
and setup cacheinfo:
init_cpu_topology()
for_each_possible_cpu()
fetch_cache_info() // Allocate cacheinfo and init levels
detect_cache_attributes()
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // not valid, setup LLC
cache_setup_properties() // setup LLC
On secondary CPU boot up:
detect_cache_attributes()
populate_cache_leaves()
get_cache_type() // Get cache type from clidr_el1,
// for LLC type=CACHE_TYPE_NOCACHE
cache_shared_cpu_map_setup()
if (!last_level_cache_is_valid()) // Valid and won't go to this branch,
// leave LLC's type=CACHE_TYPE_NOCACHE
The last_level_cache_is_valid() use cacheinfo->{attributes, fw_token} to
test it's valid or not, but populate_cache_leaves() will only reset
LLC's type, so we won't try to re-setup LLC's type and leave it
CACHE_TYPE_NOCACHE and won't export it through sysfs.
This patch tries to fix this by not re-populating the cache leaves if
the LLC is valid.
Fixes: 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230328114915.33340-1-yangyicong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The nouveau code used to call drm_fb_helper_initial_config() from
nouveau_fbcon_init() before calling drm_dev_register(). This would
probe all connectors so that drm_connector->status could be used during
backlight registration which runs from nouveau_connector_late_register().
After commit 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
the fbdev emulation code, which now is a drm-client, can only run after
drm_dev_register(). So during backlight registration the connectors are
not probed yet and the drm_connector->status == connected check in
nv50_backlight_init() would now always fail.
Replace the drm_connector->status == connected check with
a drm_helper_probe_detect() == connected check to fix nv_backlight
no longer getting registered because of this.
Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/202
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2181941
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230326205433.36485-1-hdegoede@redhat.com
|
|
This modem supports several modes with a class network function
and a number of serial functions, all using ff/00/00
The device ID is the same in all modes.
RNDIS mode
----------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0900 Rev= 4.04
S: Manufacturer=Quectel
S: Product=RM500U-CN
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
ECM mode
--------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0900 Rev= 4.04
S: Manufacturer=Quectel
S: Product=RM500U-CN
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
NCM mode
--------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0900 Rev= 4.04
S: Manufacturer=Quectel
S: Product=RM500U-CN
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0d Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_ncm
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Reported-by: Andrew Green <askgreen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
SCI IP on RZ/G2L alike SoCs do not need regshift compared to other SCI
IPs on the SH platform. Currently, it does regshift and configuring Rx
wrongly. Drop adding regshift for RZ/G2L alike SoCs.
Fixes: dfc80387aefb ("serial: sh-sci: Compute the regshift value for SCI ports")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230321114753.75038-3-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For serdev framework, tty->dev is a NULL pointer, lpuart_uport_is_active
calling device_may_wakeup() may cause kernel NULL pointer crash, so here
add the NULL pointer check before using it.
Fixes: 4f5cb8c5e915 ("tty: serial: fsl_lpuart: enable wakeup source for lpuart")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230323110923.24581-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
UARTCTRL_SBK is asserted in lpuart32_tx_empty
According to LPUART RM, Transmission Complete Flag becomes 0 if queuing
a break character by writing 1 to CTRL[SBK], so here need to avoid
checking for transmission complete when UARTCTRL_SBK is asserted,
otherwise the lpuart32_tx_empty may never get TIOCSER_TEMT.
Commit 2411fd94ceaa("tty: serial: fsl_lpuart: skip waiting for
transmission complete when UARTCTRL_SBK is asserted") only fix it in
lpuart32_set_termios(), here also fix it in lpuart32_tx_empty().
Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230323054415.20363-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Hans de Goede reported Bluetooth adapters (HCIs) connected over an UART
connection failed due corrupted Rx payload. The problem was narrowed
down to DMA Rx starting on UART_IIR_THRI interrupt. The problem occurs
despite LSR having DR bit set, which is precondition for attempting to
start DMA Rx in the first place.
From a debug patch:
[x.807834] 8250irq: iir=cc lsr+saved=60 received=0/15 ier=0f dma_t/rx/err=0/0/0
[x.808676] 8250irq: iir=c2 lsr+saved=61 received=0/0 ier=0f dma_t/rx/err=0/0/0
[x.808776] 8250irq: iir=cc lsr+saved=60 received=1/12 ier=0d dma_t/rx/err=0/1/0
[x.808870] Bluetooth: hci0: Frame reassembly failed (-84)
In the debug snippet, received field indicates 1 byte was transferred
over DMA and 12 bytes after that with the non-DMA Rx. The sole byte DMA
handled was corrupted (gets zeroed) which leads to the HCI failure.
This problem became apparent after commit e8ffbb71f783 ("serial: 8250:
use THRE & __stop_tx also with DMA") changed Tx stop behavior. Tx stop
is now triggered from a THRI interrupt.
Despite that this problem looks like a HW bug, this fix is not adding
UART_BUG_xx flag to the driver beucase it seems useful in general to
avoid starting DMA when there are only a few bytes to transfer.
Skipping DMA for small transfers avoids the extra overhead DMA incurs.
Thus, don't setup DMA Rx on UART_IIR_THRI but leave it to a subsequent
interrupt which has Rx a related IIR value.
By returning false from handle_rx_dma(), the DMA vs non-DMA decision is
postponed until either UART_IIR_RDI (FIFO threshold worth of bytes
awaiting) or UART_IIR_TIMEOUT (inter-character timeout) triggers at a
later time which allows better to discern whether the number of bytes
warrants starting DMA or not.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230317103034.12881-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fourth interrupt on SCI port is transmit end interrupt compared to
the break interrupt on other port types. So, shuffle the interrupts to fix
the transmit end interrupt handler.
Fixes: e1d0be616186 ("sh-sci: Add h8300 SCI")
Cc: stable <stable@kernel.org>
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230317150403.154094-1-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When we set the dual-role port to Host mode, we observed the following
splat:
[ 167.057718] BUG: sleeping function called from invalid context at
include/linux/sched/mm.h:229
[ 167.057872] Workqueue: events tegra_xusb_usb_phy_work
[ 167.057954] Call trace:
[ 167.057962] dump_backtrace+0x0/0x210
[ 167.057996] show_stack+0x30/0x50
[ 167.058020] dump_stack_lvl+0x64/0x84
[ 167.058065] dump_stack+0x14/0x34
[ 167.058100] __might_resched+0x144/0x180
[ 167.058140] __might_sleep+0x64/0xd0
[ 167.058171] slab_pre_alloc_hook.constprop.0+0xa8/0x110
[ 167.058202] __kmalloc_track_caller+0x74/0x2b0
[ 167.058233] kvasprintf+0xa4/0x190
[ 167.058261] kasprintf+0x58/0x90
[ 167.058285] tegra_xusb_find_port_node.isra.0+0x58/0xd0
[ 167.058334] tegra_xusb_find_port+0x38/0xa0
[ 167.058380] tegra_xusb_padctl_get_usb3_companion+0x38/0xd0
[ 167.058430] tegra_xhci_id_notify+0x8c/0x1e0
[ 167.058473] notifier_call_chain+0x88/0x100
[ 167.058506] atomic_notifier_call_chain+0x44/0x70
[ 167.058537] tegra_xusb_usb_phy_work+0x60/0xd0
[ 167.058581] process_one_work+0x1dc/0x4c0
[ 167.058618] worker_thread+0x54/0x410
[ 167.058650] kthread+0x188/0x1b0
[ 167.058672] ret_from_fork+0x10/0x20
The function tegra_xusb_padctl_get_usb3_companion eventually calls
tegra_xusb_find_port and this in turn calls kasprintf which might sleep
and so cannot be called from an atomic context.
Fix this by moving the call to tegra_xusb_padctl_get_usb3_companion to
the tegra_xhci_id_work function where it is really needed.
Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20230327095548.1599470-1-haotienh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ModemManger/Apps probing the wwan0xmmrpc0 port for 7560 Modem results in
modem crash.
7560 Modem FW uses the MBIM interface for control command communication
whereas 7360 uses Intel RPC interface so disable wwan0xmmrpc0 port for
7560.
Fixes: d08b0f8f46e4 ("net: wwan: iosm: add rpc interface for xmm modems")
Reported-and-tested-by: Martin <mwolf@adiumentum.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217200
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Shane Parslow <shaneparslow808@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using the QDMA tx scheduler to throttle tx to line speed works fine for
switch ports, but apparently caused a regression on non-switch ports.
Based on a number of tests, it seems that this throttling can be safely
dropped without re-introducing the issues on switch ports that the
tx scheduling changes resolved.
Link: https://lore.kernel.org/netdev/trinity-92c3826f-c2c8-40af-8339-bc6d0d3ffea4-1678213958520@3c-app-gmx-bs16/
Fixes: f63959c7eec3 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Reported-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230324140404.95745-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The lockdep_assert_held() calls added to cooling_device_stats_setup()
and cooling_device_stats_destroy() by commit 790930f44289 ("thermal:
core: Introduce thermal_cooling_device_update()") trigger false-positive
lockdep reports in code paths that are not subject to race conditions
(before cooling device registration and after cooling device removal).
For this reason, remove the lockdep_assert_held() calls from both
cooling_device_stats_setup() and cooling_device_stats_destroy() and
add one to thermal_cooling_device_stats_reinit() that has to be called
under the cdev lock.
Fixes: 790930f44289 ("thermal: core: Introduce thermal_cooling_device_update()")
Link: https://lore.kernel.org/linux-acpi/ZCIDTLFt27Ei7+V6@ideak-desk.fi.intel.com
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix an error handling issue with PTRACE_GET_LAST_BREAK request so
that -EFAULT is returned if put_user() fails, instead of ignoring it
- Fix a build race for the modules_prepare target when
CONFIG_EXPOLINE_EXTERN is enabled by reintroducing the dependence on
scripts
- Fix a memory leak in vfio_ap device driver
- Add missing earlyclobber annotations to __clear_user() inline
assembly to prevent incorrect register allocation
* tag 's390-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: fix PTRACE_GET_LAST_BREAK error handling
s390: reintroduce expoline dependence to scripts
s390/vfio-ap: fix memory leak in vfio_ap device driver
s390/uaccess: add missing earlyclobber annotations to __clear_user()
|
|
The code implicitly assumes that the list iterator finds a correct
handle. If 'vsi_handle' is not found the 'old_agg_vsi_info' was
pointing to an bogus memory location. For safety a separate list
iterator variable should be used to make the != NULL check on
'old_agg_vsi_info' correct under any circumstances.
Additionally Linus proposed to avoid any use of the list iterator
variable after the loop, in the attempt to move the list iterator
variable declaration into the macro to avoid any potential misuse after
the loop. Using it in a pointer comparison after the loop is undefined
behavior and should be omitted if possible [1].
Fixes: 37c592062b16 ("ice: remove the VSI info from previous agg")
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add profile conflict check while adding some FDIR rules to avoid
unexpected flow behavior, rules may have conflict including:
IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP}
IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP}
For example, when we create an FDIR rule for IPv4, this rule will work
on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we
then create an FDIR rule for IPv4_UDP and then destroy it, the first
FDIR rule for IPv4 cannot work on pkt IPv4_UDP then.
To prevent this unexpected behavior, we add restriction in software
when creating FDIR rules by adding necessary profile conflict check.
Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The current implementation causes ice_vsi_update() to update all VSI
fields based on the cached VSI context. This also assumes that the
ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the
VSI context is not correctly synced by the driver. Fix this by only
updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID.
Also, make sure to save the updated result in the cached VSI context
on success.
Fixes: 348048e724a0 ("ice: Implement iidc operations")
Co-developed-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
make modules W=1 returns:
.../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx'
.../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf'
.../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb'
Fix these warnings by adding and deleting the deviant arguments.
Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
Fixes: d7956d81f150 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()")
CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There are some subtle differences between release_device() and
set_platform_dma_ops() callbacks, so separate those two callbacks. Device
links should be removed only in release_device(), because they were
created in probe_device() on purpose and they are needed for proper
Exynos IOMMU driver operation. While fixing this, remove the conditional
code as it is not really needed.
Reported-by: Jason Gunthorpe <jgg@ziepe.ca>
Fixes: 189d496b48b1 ("iommu/exynos: Add missing set_platform_dma_ops callback")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20230315232514.1046589-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This fixes a similar problem to the one observed in:
commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe").
On some systems, during suspend/resume cycle firmware leaves
an interrupt enabled on a pin that is not used by the kernel.
This confuses the AMD pinctrl driver and causes spurious interrupts.
The driver already has logic to detect if a pin is used by the kernel.
Leverage it to re-initialize interrupt fields of a pin only if it's not
used by us.
Cc: stable@vger.kernel.org
Fixes: dbad75dd1f25 ("pinctrl: add AMD GPIO driver support.")
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Link: https://lore.kernel.org/r/20230320093259.845178-1-korneld@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The tests for the number of grant mapping or copy operations reaching
the array size of the operations buffer at the end of the main loop in
xenvif_tx_build_gops() isn't needed.
The loop can handle at maximum MAX_PENDING_REQS transfer requests, as
XEN_RING_NR_UNCONSUMED_REQUESTS() is taking unsent responses into
consideration, too.
Remove the tests.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix xenvif_get_requests() not to do grant copy operations across local
page boundaries. This requires to double the maximum number of copy
operations per queue, as each copy could now be split into 2.
Make sure that struct xenvif_tx_cb doesn't grow too large.
Cc: stable@vger.kernel.org
Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During warm reset device->fw_client is set to NULL. If a bus driver is
registered after this NULL setting and before new firmware clients are
enumerated by ISHTP, kernel panic will result in the function
ishtp_cl_bus_match(). This is because of reference to
device->fw_client->props.protocol_name.
ISH firmware after getting successfully loaded, sends a warm reset
notification to remove all clients from the bus and sets
device->fw_client to NULL. Until kernel v5.15, all enabled ISHTP kernel
module drivers were loaded right after any of the first ISHTP device was
registered, regardless of whether it was a matched or an unmatched
device. This resulted in all drivers getting registered much before the
warm reset notification from ISH.
Starting kernel v5.16, this issue got exposed after the change was
introduced to load only bus drivers for the respective matching devices.
In this scenario, cros_ec_ishtp device and cros_ec_ishtp driver are
registered after the warm reset device fw_client NULL setting.
cros_ec_ishtp driver_register() triggers the callback to
ishtp_cl_bus_match() to match ISHTP driver to the device and causes kernel
panic in guid_equal() when dereferencing fw_client NULL pointer to get
protocol_name.
Fixes: f155dfeaa4ee ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fdce ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd83 ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb880 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Cc: <stable@vger.kernel.org> # 5.16+
Signed-off-by: Tanu Malhotra <tanu.malhotra@intel.com>
Tested-by: Shaunak Saha <shaunak.saha@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
SMSC911x doesn't need mdiobus suspend/resume, that's why it sets
'mac_managed_pm'. However, setting it needs to be moved from init to
probe, so mdiobus PM functions will really never be called (e.g. when
the interface is not up yet during suspend/resume).
Fixes: 3ce9f2bef755 ("net: smsc911x: Stop and start PHY during suspend and resume")
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230327083138.6044-1-wsa+renesas@sang-engineering.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for 6.3
Usual mixed bag:
- core - output buffers
Fix return of bytes written when only some succeed.
Fix O_NONBLOCK handling to not block.
- adi,ad7791
Fix IRQ type. Not confirmed to have any impact but good to correct it anyway
- adi,adis16400
Missing CONFIG_CRC32
- capella,cm32181
Unregister 2nd I2C client if one is used.
- cio-dac
Fix bitdepth for range check on write.
- linear,ltc2497
Fix a wrong shift of the LSB introduced when switching to be24 handling.
- maxim,max11410
Fix handling of return code in read_poll_timeout()
- qcom,spmi-adc
Fix an accidental change of channel name to include the reg value from OF.
- ti,palmas
Fix a null dereference on remove due to wrong function used to get the
drvdata.
- ti,ads7950
Mark GPIO as can sleep.
* tag 'iio-fixes-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
iio: adc: palmas_gpadc: fix NULL dereference on rmmod
iio: adc: max11410: fix read_poll_timeout() usage
iio: dac: cio-dac: Fix max DAC write value check for 12-bit
iio: light: cm32181: Unregister second I2C client if present
iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
iio: adc: ad7791: fix IRQ flags
iio: buffer: make sure O_NONBLOCK is respected
iio: buffer: correctly return bytes written in output buffers
iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
iio: adis16480: select CONFIG_CRC32
drivers: iio: adc: ltc2497: fix LSB shift
iio: adc: qcom-spmi-adc5: Fix the channel name
|
|
In PPPoE add all IPv4 header option length to the parser
and adjust the L3 and L4 offset accordingly.
Currently the L4 match does not work with PPPoE and
all packets are matched as L3 IP4 OPT.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mvpp2 parser entry for QinQ has the inner and outer VLAN
in the wrong order.
Fix the problem by swapping them.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add missing IP Fragmentation Flag.
Fixes: f9358e12a0af ("net: mvpp2: split ingress traffic into multiple flows")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A system with more than one of these SSDs will only have one usable.
The kernel fails to detect more than one nvme device due to duplicate
cntlids.
before:
[ 9.395229] nvme 0000:01:00.0: platform quirk: setting simple suspend
[ 9.395262] nvme nvme0: pci function 0000:01:00.0
[ 9.395282] nvme 0000:03:00.0: platform quirk: setting simple suspend
[ 9.395305] nvme nvme1: pci function 0000:03:00.0
[ 9.409873] nvme nvme0: Duplicate cntlid 1 with nvme1, subsys nqn.2022-07.com.siliconmotion:nvm-subsystem-sn- , rejecting
[ 9.409982] nvme nvme0: Removing after probe failure status: -22
[ 9.427487] nvme nvme1: allocated 64 MiB host memory buffer.
[ 9.445088] nvme nvme1: 16/0/0 default/read/poll queues
[ 9.449898] nvme nvme1: Ignoring bogus Namespace Identifiers
after:
[ 1.161890] nvme 0000:01:00.0: platform quirk: setting simple suspend
[ 1.162660] nvme nvme0: pci function 0000:01:00.0
[ 1.162684] nvme 0000:03:00.0: platform quirk: setting simple suspend
[ 1.162707] nvme nvme1: pci function 0000:03:00.0
[ 1.191354] nvme nvme0: allocated 64 MiB host memory buffer.
[ 1.193378] nvme nvme1: allocated 64 MiB host memory buffer.
[ 1.211044] nvme nvme1: 16/0/0 default/read/poll queues
[ 1.211080] nvme nvme0: 16/0/0 default/read/poll queues
[ 1.216145] nvme nvme0: Ignoring bogus Namespace Identifiers
[ 1.216261] nvme nvme1: Ignoring bogus Namespace Identifiers
Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue.
Signed-off-by: Juraj Pecigos <kernel@juraj.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to
combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When
using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for
each partition found on the loop device after the second ioctl(), but
when using LOOP_CONFIGURE, no such uevent was being sent.
In the old setup, uevents are disabled for LOOP_SET_FD, but not for
LOOP_SET_STATUS64. This makes sense, as it prevents uevents being
sent for a partially configured device during LOOP_SET_FD - they're
only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE,
uevents were disabled for the entire operation, so that final
notification was never issued. To fix this, reduce the critical
section to exclude the loop_reread_partitions() call, which causes
the uevents to be issued, to after uevents are re-enabled, matching
the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination.
I noticed this because Busybox's losetup program recently changed from
using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke
my setup, for which I want a notification from the kernel any time a
new partition becomes available.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
[hch: reduced the critical section]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl")
Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For ACPI drivers that provide a ->notify() callback and set
ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be
invoked while either the ->add() or the ->remove() callback is running
without any synchronization at the bus type level which is counter to
the common-sense expectation that notification handling should only be
enabled when the driver is actually bound to the device. As a result,
if the driver is not careful enough, it's ->notify() callback may crash
when it is invoked too early or too late [1].
This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop
driver member of struct acpi_device") that made acpi_bus_notify() check
for the presence of the driver and its ->notify() callback directly
instead of using an extra driver pointer that was only set and cleared
by the bus type code, but it was present before that commit although
it was harder to reproduce then.
It can be addressed by using the observation that
acpi_device_install_notify_handler() can be modified to install the
handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is
set in the driver flags, in which case acpi_bus_notify() will not need
to invoke the driver's ->notify() callback any more and that callback
will only be invoked after acpi_device_install_notify_handler() has run
and before acpi_device_remove_notify_handler() runs, which implies the
correct ordering with respect to the other ACPI driver callbacks.
Modify the code accordingly and while at it, drop two redundant local
variables from acpi_bus_notify() and turn its description comment into
a proper kerneldoc one.
Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device")
Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1]
Reported-by: Pierre Asselin <pa@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Pierre Asselin <pa@panix.com>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel tpmi/vsec fixes
- think-lmi fixes
- two other small fixes / hw-id additions
* tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/surface: aggregator: Add missing fwnode_handle_put()
platform/x86: think-lmi: Add possible_values for ThinkStation
platform/x86: think-lmi: only display possible_values if available
platform/x86: think-lmi: use correct possible_values delimiters
platform/x86: think-lmi: add missing type attribute
platform/x86 (gigabyte-wmi): Add support for A320M-S2H V2
platform/x86/intel: tpmi: Revise the comment of intel_vsec_add_aux
platform/x86/intel: tpmi: Fix double free in tpmi_create_device()
platform/x86/intel: vsec: Fix a memory leak in intel_vsec_add_aux
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"Raw NAND controller driver fixes:
- meson:
- Invalidate cache on polling ECC bit
- Initialize struct with zeroes
- nandsim: Artificially prevent sequential page reads
ECC engine driver fixes:
- mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is
used
Binging fixes:
- jedec,spi-nor: Document CPOL/CPHA support"
* tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: meson: invalidate cache on polling ECC bit
mtd: rawnand: nandsim: Artificially prevent sequential page reads
dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
mtd: nand: mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used
mtd: rawnand: meson: initialize struct with zeroes
|
|
The device release callback function invoked to release the matrix device
uses the dev_get_drvdata(device *dev) function to retrieve the
pointer to the vfio_matrix_dev object in order to free its storage. The
problem is, this object is not stored as drvdata with the device; since the
kfree function will accept a NULL pointer, the memory for the
vfio_matrix_dev object is never freed.
Since the device being released is contained within the vfio_matrix_dev
object, the container_of macro will be used to retrieve its pointer.
Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver")
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20230320150447.34557-1-akrowiak@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This has been reported as working.
Suggested-by: got3nks <got3nks@users.noreply.github.com>
Link: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/15#issuecomment-1483942966
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230327-gigabyte-wmi-b650-elite-ax-v1-1-d4d645c21d0b@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the
slp_s0_residency attribute has been reporting the wrong value. Unlike other
platforms, ADL PCH does not have a counter for the time that the SLP_S0
signal was asserted. Instead, firmware uses the aggregate of the Low Power
Mode (LPM) substate counters as the S0ix value. Since the LPM counters run
at a different frequency, this lead to misreporting of the S0ix time.
Add a check for Alder Lake PCH and adjust the frequency accordingly when
display slp_s0_residency.
Fixes: bbab31101f44 ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230320212029.3154407-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If we fail to adjust the GuC run-control on opening the perf stream,
make sure we unwind the wakeref just taken.
v2: Retain old goto label names (Ashutosh)
v3: Drop bitfield boolean
Fixes: 01e742746785 ("drm/i915/guc: Support OA when Wa_16011777198 is enabled")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 2810ac6c753d17ee2572ffb57fe2382a786a080a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently i915_gem_object_is_framebuffer() doesn't treat the
BO containing the framebuffer's DPT as a framebuffer itself.
This means eg. that the shrinker can evict the DPT BO while
leaving the actual FB BO bound, when the DPT is allocated
from regular shmem.
That causes an immediate oops during hibernate as we
try to rewrite the PTEs inside the already evicted
DPT obj.
TODO: presumably this might also be the reason for the
DPT related display faults under heavy memory pressure,
but I'm still not sure how that would happen as the object
should be pinned by intel_dpt_pin() while in active use by
the display engine...
Cc: stable@vger.kernel.org
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 779cb5ba64ec7df80675a956c9022929514f517a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
i915_gem_object_create_lmem_from_data() lacks the flush of the data
written to lmem to ensure the object is marked as dirty and the writes
flushed to the backing store. Once created, we can immediately release
the obj->mm.mapping caching of the vmap.
Fixes: 7acbbc7cf485 ("drm/i915/guc: put all guc objects in lmem when available")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316165918.13074-1-nirmoy.das@intel.com
(cherry picked from commit e2ee10474ce766686e7a7496585cdfaf79e3a1bf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The commit renaming icl_tc_phy_is_in_safe_mode() to
icl_tc_phy_take_ownership() didn't flip the function's return value
accordingly, fix this up.
This didn't cause an actual problem besides state check errors, since
the function is only used during HW readout.
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: f53979d68a77 ("drm/i915/display/tc: Rename safe_mode functions ownership")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-4-imre.deak@intel.com
(cherry picked from commit f2c7959dda614d9b7c6a41510492de39d31705ec)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Keeping DC states enabled is incompatible with the _noarm()/_arm()
split we use for writing pipe/plane registers. When DC5 and PSR
are enabled, all pipe/plane registers effectively become self-arming
on account of DC5 exit arming the update, and PSR exit latching it.
What probably saves us most of the time is that (with PIPE_MISC[21]=0)
all pipe register writes themselves trigger PSR exit, and then
we don't re-enter PSR until the idle frame count has elapsed.
So it may be that the PSR exit happens already before we've
updated the state too much.
Also the PSR1 panel (at least on this KBL) seems to discard the first
frame we trasmit, presumably still scanning out from its internal
framebuffer at that point. So only the second frame we transmit is
actually visible. But I suppose that could also be panel specific
behaviour. I haven't checked out how other PSR panels behave, nor
did I bother to check what the eDP spec has to say about this.
And since this really is all about DC states, let's switch from
the MODESET domain to the DC_OFF domain. Functionally they are
100% identical. We should probably remove the MODESET domain...
And for good measure let's toss in an assert to the place where
we do the _noarm() register writes to make sure DC states are
in fact off.
v2: Just use intel_display_power_is_enabled() (Imre)
Cc: <stable@vger.kernel.org> #v5.17+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming")
Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com
(cherry picked from commit 41b4c7fe72b6105a4b49395eea9aa40cef94288d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Unlike SKL/GLK the ICL CSC unit suffers from a new issue where
CSC_MODE arming is sticky. That is, once armed it remains armed
causing the CSC coeff/offset registers to become effectively
self-arming.
CSC coeff/offset registers writes no longer disarm the CSC,
but fortunately register read still do. So we can use that
to disarm the CSC unit once the registers for the current
frame have been latched. This avoid s the self-arming behaviour
from persisting into the next frame's .color_commit_noarm()
call.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 92736f1b452bbb8a66bdb5b1d263ad00e04dd3b8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We're going to need stuff after the color management
register latching has happened. Add a corresponding hook.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 3962ca4e080a525fc9eae87aa6b2286f1fae351d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
skl/glk
SKL/GLK CSC unit suffers from a nasty issue where a CSC
coeff/offset register read or write between DC5 exit and
PSR exit will undo the CSC arming performed by DMC, and
then during PSR exit the hardware will latch zeroes into
the active CSC registers. This causes any plane going
through the CSC to output all black.
We can sidestep the issue by making sure the PSR exit has
already actually happened before we touch the CSC coeff/offset
registers. Easiest way to guarantee that is to just move the
CSC programming back into the .color_commir_arm() as we force
a PSR exit (and crucially wait for it to actually happen)
prior to touching the arming registers.
When PSR (and thus also DC states) are disabled we don't
have anything to worry about, so we can keep using the
more optional _noarm() hook for writing the CSC registers.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283
Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 80a892a4c2428b65366721599fc5fe50eaed35fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We're going to want different behavior for skl/glk vs. icl
in .color_commit_noarm(), so split the hook into two. Arguably
we already had slightly different behaviour since
csc_enable/gamma_enable are never set on icl+, so the old
code was perhaps a bit confusing as well.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit f161eb01f50ab31f2084975b43bce54b7b671e17)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Expose intel_rps_read_actual_frequency_fw to read the actual freq without
taking forcewake for use by PMU. The code is refactored to use a common set
of functions across sysfs and PMU. Using common functions with sysfs in PMU
solves the issues of missing support for MTL and missing support for older
generations (prior to Gen6). It also future proofs the PMU where sometimes
code has been updated for sysfs and PMU has been missed.
v2: Remove runtime_pm_if_in_use from read_actual_frequency_fw (Tvrtko)
v3: (Tvrtko)
- Remove goto in __read_cagf
- Unexport intel_rps_get_cagf and intel_rps_read_punit_req
Fixes: 22009b6dad66 ("drm/i915/mtl: Modify CAGF functions for MTL")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8280
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316004800.2539753-1-ashutosh.dixit@intel.com
(cherry picked from commit 44df42e66139b5fac8db49ee354be279210f9816)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
