| Age | Commit message (Collapse) | Author |
|---|
|
Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.
Use the BRANCH_HALT_SKIP define to skip checking the halt bit.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-6-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
GPUCC has its own GPLL0 legs - one for 1-1 and one for div-2 output.
Add .name lookup to make sure older DTs consume the correct clock.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-5-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Up until now, the GPLL0_DIV MMSS input has been modeled as a fixed
child of MMSS_GPLL0_DIV that's always-on. Properly representing the
former in the GCC driver makes us unable to keep doing so.
Consume MSS_GPLL0_DIV through fw_name ("gpll0_div") as well as add a
fixed .name link to keep backwards compatibility.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-4-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Up until now, we've been relying on some non-descript hardware magic
to pinkypromise turn the clocks on for us. While new SoCs shine with
that feature, MSM8998 can not always be fully trusted.
Register the MMSS and GPUSS GPLL0 legs with the CCF to allow for manual
enable voting.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-3-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
With qmp_send() handling variable length messages and string formatting
he callers of qmp_send() can be cleaned up to not care about these
things.
Drop the QMP_MSG_LEN sized buffers and use the message formatting, as
appropriate.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811205839.727373-5-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The majority of callers to qmp_send() composes the message dynamically
using some form of sprintf(), resulting in unnecessary complication and
stack usage.
By changing the interface of qmp_send() to take a format string and
arguments, the duplicated composition of the commands can be moved to a
single location.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811205839.727373-4-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The existing implementation of qmp_send() requires the caller to provide
a buffer which is of word-aligned. The underlying reason for this is
that message ram only supports word accesses, but pushing this
requirement onto the clients results in the same boiler plate code
sprinkled in every call site.
By using a temporary buffer in qmp_send() we can hide the underlying
hardware limitations from the clients and allow them to pass their
NUL-terminates C string directly.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811205839.727373-2-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
We need the char/misc fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename get_datasize() to intel_microcode_get_datasize() and make it an inline.
[ tglx: Make the argument typed and fix up the IFS code ]
Suggested-by: Boris Petkov <bp@alien8.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230812195727.894165745@linutronix.de
|
|
Currently vendor specific headers are included explicitly when used in
common code. Instead, include the vendor specific headers in
microcode.h, and include that in all usages.
No functional change.
Suggested-by: Boris Petkov <bp@alien8.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230812195727.776541545@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Hans de Goede:
- lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4
on some Thinkbook models, fix this
- A set of small fixes for mlx-platform
- Other small fixes and hw-id additions
* tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type
platform: mellanox: Change register offset addresses
platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask
platform: mellanox: mlx-platform: Fix signals polarity and latch mask
platform: mellanox: Fix order in exit flow
platform/x86: ISST: Reduce noise for missing numa information in logs
platform/x86: msi-ec: Fix the build
ACPI: scan: Create platform device for CS35L56
platform/x86/amd/pmf: Fix unsigned comparison with less than zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eleven small fixes, ten in drivers.
Of the two fixes marked core, one is in the raid helper class (used by
some raid device drivers) and the other one is the /proc/scsi/scsi
parsing fix for potential reads beyond the end of the buffer"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedf: Fix firmware halt over suspend and resume
scsi: qedi: Fix firmware halt over suspend and resume
scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
scsi: lpfc: Remove reftag check in DIF paths
scsi: ufs: renesas: Fix private allocation
scsi: snic: Fix possible memory leak if device_add() fails
scsi: core: Fix possible memory leak if device_add() fails
scsi: core: Fix legacy /proc parsing buffer overflow
scsi: 53c700: Check that command slot is not NULL
scsi: fnic: Replace return codes in fnic_clean_pending_aborts()
scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_ccorr.c:47: warning: Function parameter or member 'clk' not described in 'mtk_disp_ccorr'
drivers/gpu/drm/mediatek/mtk_disp_ccorr.c:47: warning: Function parameter or member 'regs' not described in 'mtk_disp_ccorr'
drivers/gpu/drm/mediatek/mtk_disp_ccorr.c:47: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_ccorr'
drivers/gpu/drm/mediatek/mtk_disp_ccorr.c:47: warning: Function parameter or member 'data' not described in 'mtk_disp_ccorr'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230609081732.3842341-6-lee@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_aal.c:39: warning: Function parameter or member 'clk' not described in 'mtk_disp_aal'
drivers/gpu/drm/mediatek/mtk_disp_aal.c:39: warning: Function parameter or member 'regs' not described in 'mtk_disp_aal'
drivers/gpu/drm/mediatek/mtk_disp_aal.c:39: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_aal'
drivers/gpu/drm/mediatek/mtk_disp_aal.c:39: warning: Function parameter or member 'data' not described in 'mtk_disp_aal'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230609081732.3842341-5-lee@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
1. Fix build warning message in mtk_disp_ovl_adaptor.c
>> drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c:415:10:
warning: cast to smaller integer type 'enum mtk_ovl_adaptor_comp_type'
from 'const void *' [-Wvoid-pointer-to-enum-cast]
type = (enum mtk_ovl_adaptor_comp_type)of_id->data;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
2. Also fix the same warning message in mtk_drm_drv.c
>> drivers/gpu/drm/mediatek/mtk_drm_drv.c:832:15:
warning: cast to smaller integer type 'enum mtk_ddp_comp_type'
from 'const void *' [-Wvoid-pointer-to-enum-cast]
comp_type = (enum mtk_ddp_comp_type)of_id->data;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Fixes: 453c3364632a ("drm/mediatek: Add ovl_adaptor support for MT8195")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305042054.ZtWME9OU-lkp@intel.com/
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230621075421.1982-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Also return -ENOMEM if such a failure happens, the implement should take
responsibility for the error handling.
Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230706134000.130098-1-suijingfeng@loongson.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
bluetooth-next pull request for net-next:
- Add new VID/PID for Mediatek MT7922
- Add support multiple BIS/BIG
- Add support for Intel Gale Peak
- Add support for Qualcomm WCN3988
- Add support for BT_PKT_STATUS for ISO sockets
- Various fixes for experimental ISO support
- Load FW v2 for RTL8852C
- Add support for NXP AW693 chipset
- Add support for Mediatek MT2925
|
|
chassis-type
The lenovo-ymc driver is causing the keyboard + touchpad to stop working
on some regular laptop models such as the Lenovo ThinkBook 13s G2 ITL 20V9.
The problem is that there are YMC WMI GUID methods in the ACPI tables
of these laptops, despite them not being Yogas and lenovo-ymc loading
causes libinput to see a SW_TABLET_MODE switch with state 1.
This in turn causes libinput to ignore events from the builtin keyboard
and touchpad, since it filters those out for a Yoga in tablet mode.
Similar issues with false-positive SW_TABLET_MODE=1 reporting have
been seen with the intel-hid driver.
Copy the intel-hid driver approach to fix this and only bind to the WMI
device on machines where the DMI chassis-type indicates the machine
is a convertible.
Add a 'force' module parameter to allow overriding the chassis-type check
so that users can easily test if the YMC interface works on models which
report an unexpected chassis-type.
Fixes: e82882cdd241 ("platform/x86: Add driver for Yoga Tablet Mode switch")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229373
Cc: André Apitzsch <git@apitzsch.eu>
Cc: stable@vger.kernel.org
Tested-by: Andrew Kallmeyer <kallmeyeras@gmail.com>
Tested-by: Gergő Köteles <soyer@irl.hu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230812144818.383230-1-hdegoede@redhat.com
|
|
Move debug register offsets to different location due to hardware changes.
Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-5-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
power down mask
Use kernel_power_off() instead of kernel_halt() to pass through
machine_power_off() -> pm_power_off(), otherwise axillary power does
not go off.
Change "power down" bitmask.
Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-4-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Change polarity of chassis health and power signals and fix latch reset
mask for L1 switch.
Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix exit flow order: call mlxplat_post_exit() after
mlxplat_i2c_main_exit() in order to unregister main i2c driver before
to "mlxplat" driver.
Fixes: 0170f616f496 ("platform: mellanox: Split initialization procedure")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There's quite a few watchdog drivers which are easily enabled for
COMPILE_TEST, so let's enable them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230728195022.1198555-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This driver uses the WATCHDOG_CORE framework and ISA_BUS_API.
This commit has these dependencies correctly selected.
Signed-off-by: Florent CARLI <fcarli@gmail.com>
Co-authored-by: Yoann Congal <yoann.congal@smile.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230721081347.52069-1-fcarli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230726233302.3812749-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This patch add support for Marvell GTI watchdog. Global timer
unit (GTI) support hardware watchdog timer. Software programs
watchdog timer to generate interrupt on first timeout, second
timeout is configured to be ignored and system reboots on
third timeout.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230803032523.6242-2-bbhushan2@marvell.com
[groeck: MODULE_LICENSE GPL v2 -> GPL since that is sufficient]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The module_mcb_driver() will set "THIS_MODULE" to driver.owner when
register a mcb_driver driver, so it is redundant initialization to set
driver.owner in men_z069_driver statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230804100617.100251-1-lizetao1@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
fixed-link mode
lynx_pcs_link_up_sgmii() is supposed to update the PCS speed and duplex
for the non-inband operating modes, and prior to the blamed commit, it
did just that, but a mistake sneaked into the conversion and reversed
the condition.
It is easy for this to go undetected on platforms that also initialize
the PCS in the bootloader, because Linux doesn't reset it (although
maybe it should). The nature of the bug is that phylink will not touch
the IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK fields when it should, and
it will apparently keep working if the previous values set by the
bootloader were correct.
Fixes: c689a6528c22 ("net: pcs: lynx: update PCS driver to use neg_mode")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 675ad47375c7 ("e1000: Use netdev_<level>, pr_<level> and dev_<level>")
declared but never implemented e1000_get_hw_dev_name().
Commit 1532ecea1deb ("e1000: drop dead pcie code from e1000")
removed e1000_check_mng_mode()/e1000_blink_led_start() but not the declarations.
Commit c46b59b241ec ("e1000: Remove unused function e1000_mta_set.")
removed e1000_mta_set() but not its declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Uwe reports:
"Most PHYs signal WoL using an interrupt. So disabling interrupts [at
shutdown] breaks WoL at least on PHYs covered by the marvell driver."
Discussing with Ioana, the problem which was trying to be solved was:
"The board in question is a LS1021ATSN which has two AR8031 PHYs that
share an interrupt line. In case only one of the PHYs is probed and
there are pending interrupts on the PHY#2 an IRQ storm will happen
since there is no entity to clear the interrupt from PHY#2's registers.
PHY#1's driver will get stuck in .handle_interrupt() indefinitely."
Further confirmation that "the two AR8031 PHYs are on the same MDIO
bus."
With WoL using interrupts to wake the system, in such a case, the
system will begin booting with an asserted interrupt. Thus, we need to
cope with an interrupt asserted during boot.
Solve this instead by disabling interrupts during PHY probe. This will
ensure in Ioana's situation that both PHYs of the same type sharing an
interrupt line on a common MDIO bus will have their interrupt outputs
disabled when the driver probes the device, but before we hook in any
interrupt handlers - thus avoiding the interrupt storm.
A better fix would be for platform firmware to disable the interrupting
devices at source during boot, before control is handed to the kernel.
Fixes: e2f016cf7751 ("net: phy: add a shutdown procedure")
Link: 20230804071757.383971-1-u.kleine-koenig@pengutronix.de
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the Ethernet driver does not provide the number of lanes
in the __ethtool_get_link_ksettings() response, the function
ib_get_width_and_speed() does not take consideration of 50G,
100G and 200G speeds while calculating the IB width and speed.
Update the width and speed for the above netdev speeds.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1690966823-8159-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Replace '0' with IB_SIGNAL_REQ_WR given the sq_sig_type is either
IB_SIGNAL_ALL_WR or IB_SIGNAL_REQ_WR per the below.
enum ib_sig_type {
IB_SIGNAL_ALL_WR,
IB_SIGNAL_REQ_WR
};
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20230731092106.10396-1-guoqing.jiang@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- mark virtual chips exposed by gpio-sim as ones that can sleep
(callbacks must not be called from interrupt context)
- fix an off-by-one error in gpio-ws16c48
* tag 'gpio-fixes-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ws16c48: Fix off-by-one error in WS16C48 resource region extent
gpio: sim: mark the GPIO chip as a one that can sleep
|
|
Simplify the logic when checking the current live value against the user
input.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Printing a size_t using the %lu format string causes a warning on
architectures that define the type as 'unsigned int':
In file included from include/linux/device.h:15,
from include/linux/acpi.h:14,
from drivers/soc/hisilicon/kunpeng_hccs.c:25:
drivers/soc/hisilicon/kunpeng_hccs.c: In function 'hccs_get_bd_info':
drivers/soc/hisilicon/kunpeng_hccs.c:441:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
Use the correct %zu format instead.
Fixes: 886bdf9c883bc ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 6.5-rc6 that resolve
some reported issues. Included in here are:
- bunch of iio driver fixes for reported problems
- interconnect driver fixes
- counter driver build fix
- cardreader driver fixes
- binder driver fixes
- other tiny driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: tps6594-esm: Disable ESM for rev 1 PMIC
misc: rtsx: judge ASPM Mode to set PETXCFG Reg
binder: fix memory leak in binder_init()
iio: cros_ec: Fix the allocation size for cros_ec_command
tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure
iio: imu: lsm6dsx: Fix mount matrix retrieval
iio: adc: meson: fix core clock enable/disable moment
iio: core: Prevent invalid memory access when there is no parent
iio: frequency: admv1013: propagate errors from regulator_get_voltage()
counter: Fix menuconfig "Counter support" submenu entries disappearance
dt-bindings: iio: adi,ad74115: remove ref from -nanoamp
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
iio: light: bu27008: Fix intensity data type
iio: light: bu27008: Fix scale format
iio: light: bu27034: Fix scale format
iio: adc: ad7192: Fix ac excitation feature
interconnect: qcom: sa8775p: add enable_mask for bcm nodes
interconnect: qcom: sm8550: add enable_mask for bcm nodes
interconnect: qcom: sm8450: add enable_mask for bcm nodes
interconnect: qcom: Add support for mask-based BCMs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for reported
problems. Included in here are:
- thunderbolt driver memory leak fix
- thunderbolt display flicker fix
- usb dwc3 driver fix
- usb gadget uvc disconnect crash fix
- usb typec Kconfig build dependency fix
- usb typec small fixes
- usb-con-gpio bugfix
- usb-storage old driver bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request()
usb: dwc3: Properly handle processing of pending events
usb-storage: alauda: Fix uninit-value in alauda_check_media()
usb: common: usb-conn-gpio: Prevent bailing out if initial role is none
USB: Gadget: core: Help prevent panic during UVC unconfigure
usb: typec: mux: intel: Add dependency on USB_COMMON
usb: typec: nb7vpq904m: Add an error handling path in nb7vpq904m_probe()
usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment
usb: typec: tcpm: Fix response to vsafe0V event
thunderbolt: Fix Thunderbolt 3 display flickering issue on 2nd hot plug onwards
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mitigation fixes from Borislav Petkov:
"The first set of fallout fixes after the embargo madness. There will
be another set next week too.
- A first series of cleanups/unifications and documentation
improvements to the SRSO and GDS mitigations code which got
postponed to after the embargo date
- Fix the SRSO aliasing addresses assertion so that the LLVM linker
can parse it too"
* tag 'x86_bugs_for_v6.5_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
driver core: cpu: Fix the fallback cpu_show_gds() name
x86: Move gds_ucode_mitigated() declaration to header
x86/speculation: Add cpu_show_gds() prototype
driver core: cpu: Make cpu_show_not_affected() static
x86/srso: Fix build breakage with the LLVM linker
Documentation/srso: Document IBPB aspect and fix formatting
driver core: cpu: Unify redundant silly stubs
Documentation/hw-vuln: Unify filename specification in index
|
|
In the current code, devres_release_all() only gets called if the device
has a bus and has been probed.
This leads to issues when using bus-less or driver-less devices where
the device might never get freed if a managed resource holds a reference
to the device. This is happening in the DRM framework for example.
We should thus call devres_release_all() in the device_del() function to
make sure that the device-managed actions are properly executed when the
device is unregistered, even if it has neither a bus nor a driver.
This is effectively the same change than commit 2f8d16a996da ("devres:
release resources on device_del()") that got reverted by commit
a525a3ddeaca ("driver core: free devres in device_release") over
memory leaks concerns.
This patch effectively combines the two commits mentioned above to
release the resources both on device_del() and device_release() and get
the best of both worlds.
Fixes: a525a3ddeaca ("driver core: free devres in device_release")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-3-6aa7e074f373@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Platform devices show some inconsistencies with how devm resources are
released when the device has been probed and when it hasn't.
In particular, we can register device-managed actions no matter if the
device has be bound to a driver or not, but devres_release_all() will
only be called if it was bound to a driver or if there's no reference
held to it anymore.
If it wasn't bound to a driver and we still have a reference,
devres_release_all() will never get called. This is surprising
considering that if the driver isn't bound but doesn't have any
reference to it anymore, that function will get called, and if it was
bound to a driver but still has references, that function will get
called as well.
Even if that case is fairly unusual, it can easily lead to memory leaks.
The plan is, with the next patch, to make it consistent and enforce that
devres_release_all() is called no matter what situation we're in. For
now, it just tests for the current behaviour and skips over the
inconsistencies.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-2-6aa7e074f373@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The root devices show some odd behaviours compared to regular "bus" devices
that have been probed through the usual mechanism, so let's create kunit
tests to exercise those paths and odd cases.
It's not clear whether root devices are even allowed to use device
managed resources, but the fact that it works in some cases but not
others like shown in that test suite shouldn't happen either way: we
want to make it consistent and documented.
These tests will (after the following patches) ensure that consistency
and effectively document that it's allowed.
If it ever turns out to be a bad idea, we can always roll back and
modify the tests then.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-1-6aa7e074f373@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove duplicated include of linux/hugetlb.h. Resolves checkincludes
message.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20230810120008.25297-1-guozihua@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The devm_nvmem_register() function returns error pointers. It never
returns NULL. Update the checks accordingly.
Fixes: 0969001569e4 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX OTP via NVMEM sysfs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/043df330-222b-4c2c-ae19-ed2f731bfe0b@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no need to call the dev_err_probe() function directly to print
a custom message when handling an error from platform_get_irq_byname()
function as it is going to display an appropriate error message
in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230807093010.2112302-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add kfree() in the later error handling in order to avoid memory leak.
Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230707021625.7727-1-jiasheng@iscas.ac.cn
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810123104.231167-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
