| Age | Commit message (Collapse) | Author |
|---|
|
Add the PM7550 and PMIV0108 to the pmic_models array.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250625-sm7635-socinfo-v1-3-be09d5c697b8@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the entries for the 'volcano' family, namely SM7635, SM6650,
SM6650P, QCM6690 and QCS6690.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250625-sm7635-socinfo-v1-2-be09d5c697b8@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There's a subtle race in the SCM driver: we assign the __scm pointer
before requesting the waitqueue interrupt. Assigning __scm marks the SCM
API as ready to accept calls. It's possible that a user makes a call
right after we set __scm and the firmware raises an interrupt before the
driver's ready to service it. Move the __scm assignment after we request
the interrupt.
This has the added benefit of allowing us to drop the goto label.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-4-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Now that qcom_scm_shm_bridge_enable() uses the struct device passed to
it as argument to make the QCOM_SCM_MP_SHM_BRIDGE_ENABLE SCM call, we
can move the TZMem initialization before the assignment of the __scm
pointer in the SCM driver (which marks SCM as ready to users) thus
fixing the potential race between consumer calls and the memory pool
initialization.
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/all/20250120151000.13870-1-johan+linaro@kernel.org/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-3-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
qcom_scm_shm_bridge_enable() is used early in the SCM initialization
routine. It makes an SCM call and so expects the internal __scm pointer
in the SCM driver to be assigned. For this reason the tzmem memory pool
is allocated *after* this pointer is assigned. However, this can lead to
a crash if another consumer of the SCM API makes a call using the memory
pool between the assignment of the __scm pointer and the initialization
of the tzmem memory pool.
As qcom_scm_shm_bridge_enable() is a special case, not meant to be
called by ordinary users, pull it into the local SCM header. Make it
take struct device as argument. This is the device that will be used to
make the SCM call as opposed to the global __scm pointer. This will
allow us to move the tzmem initialization *before* the __scm assignment
in the core SCM driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-2-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
qcom_scm_shm_bridge_create() and qcom_scm_shm_bridge_delete() take
struct device as argument but don't use it. Remove it from these
functions' prototypes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250630-qcom-scm-race-v2-1-fa3851c98611@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Implement the PCIe Congestion Event notifier which triggers a work item
to query the PCIe Congestion Event object. The result of the congestion
state is reflected in the new ethtool stats:
* pci_bw_inbound_high: the device has crossed the high threshold for
inbound PCIe traffic.
* pci_bw_inbound_low: the device has crossed the low threshold for
inbound PCIe traffic
* pci_bw_outbound_high: the device has crossed the high threshold for
outbound PCIe traffic.
* pci_bw_outbound_low: the device has crossed the low threshold for
outbound PCIe traffic
The high and low thresholds are currently configured at 90% and 75%.
These are hysteresis thresholds which help to check if the
PCI bus on the device side is in a congested state.
If low + 1 = high then the device is in a congested state. If low == high
then the device is not in a congested state.
The counters are also documented.
A follow-up patch will make the thresholds configurable.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752589821-145787-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add initial infrastructure to create and destroy the PCIe Congestion
Event object if the object is supported.
The verb for the object creation function is "set" instead of
"create" because the function will accommodate the modify operation
as well in a subsequent patch.
The next patches will hook it up to the event handler and will add
actual functionality.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752589821-145787-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netiucv driver creates TCP/IP interfaces over IUCV between Linux
guests on z/VM and other z/VM entities.
Rationale for removal:
- NETIUCV connections are only supported for compatibility with
earlier versions and not to be used for new network setups,
since at least Linux kernel 4.0.
- No known active users, use cases, or product dependencies
- The driver is no longer relevant for z/VM networking;
preferred methods include:
* Device pass-through (e.g., OSA, RoCE)
* z/VM Virtual Switch (VSWITCH)
The IUCV mechanism itself remains supported and is actively used
via AF_IUCV, hvc_iucv, and smsg_iucv.
Signed-off-by: Nagamani PV <nagamani@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250715074210.3999296-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove USARIO_CLKEN flag since this is now a device tree argument and
not fixed to the SoC.
This will instead be selected by the "cdns,refclk-ext"
device tree property.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/1e7a8c324526f631f279925aa8a6aa937d55c796.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This macro enables the RMII mode bit in the USRIO register when RMII
mode is requested.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/6698836e4ee7df5f6bee181f0d2e38d4b8e4cec2.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RMII and RGMII can both support internal or external provided
REFCLKs 50MHz and 125MHz respectively. Since this is dependent on
the board that the SoC is on this needs to be set via the device tree.
This property flag is checked in the MACB DT node so the REFCLK cap is
configured the correct way for the RMII or RGMII is configured on the
board.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/7f9b65896d6b7b48275bc527b72a16347f8ce10a.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-15 (ixgbe, fm10k, i40e, ice)
Arnd Bergmann resolves compile issues with large NR_CPUS for ixgbe, fm10k,
and i40e.
For ice:
Dave adds a NULL check for LAG netdev.
Michal corrects a pointer check in debugfs initialization.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: check correct pointer in fwlog debugfs
ice: add NULL check in eswitch lag check
ethernet: intel: fix building with large NR_CPUS
====================
Link: https://patch.msgid.link/20250715202948.3841437-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
np->name was being used after calling of_node_put(np), which
releases the node and can lead to a use-after-free bug.
Previously, of_node_put(np) was called unconditionally after
of_find_device_by_node(np), which could result in a use-after-free if
pdev is NULL.
This patch moves of_node_put(np) after the error check to ensure
the node is only released after both the error and success cases
are handled appropriately, preventing potential resource issues.
Fixes: 23290c7bc190 ("net: airoha: Introduce Airoha NPU support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250715143102.3458286-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gso_size is expected by the networking stack to be the size of the
payload (thus, not including ethernet/IP/TCP-headers). However, cqe_bcnt
is the full sized frame (including the headers). Dividing cqe_bcnt by
lro_num_seg will then give incorrect results.
For example, running a bpftrace higher up in the TCP-stack
(tcp_event_data_recv), we commonly have gso_size set to 1450 or 1451 even
though in reality the payload was only 1448 bytes.
This can have unintended consequences:
- In tcp_measure_rcv_mss() len will be for example 1450, but. rcv_mss
will be 1448 (because tp->advmss is 1448). Thus, we will always
recompute scaling_ratio each time an LRO-packet is received.
- In tcp_gro_receive(), it will interfere with the decision whether or
not to flush and thus potentially result in less gro'ed packets.
So, we need to discount the protocol headers from cqe_bcnt so we can
actually divide the payload by lro_num_seg to get the real gso_size.
v2:
- Use "(unsigned char *)tcp + tcp->doff * 4 - skb->data)" to compute header-len
(Tariq Toukan <tariqt@nvidia.com>)
- Improve commit-message (Gal Pressman <gal@nvidia.com>)
Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250715-cpaasch-pf-925-investigate-incorrect-gso_size-on-cx-7-nic-v2-1-e06c3475f3ac@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These commands are necessary to avoid severely abnormal and inaccurate
temperature readings that are caused by using the default commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-4-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
driver data
Add LVTS commands and their sizes to driver data in preparation for
adding different commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-3-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
const
Change the LVTS commands array to static const in preparation for
adding different commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-2-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Commit 42cdf6f687da ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3911
Fixes: 42cdf6f687da ("drm/amdgpu/gfx8: always restore kcq MQDs")
Signed-off-by: Eeli Haapalainen <eeli.haapalainen@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2becafc319db3d96205320f31cc0de4ee5a93747)
Cc: stable@vger.kernel.org
|
|
Increment the reset counter only if soft recovery succeeded. This is
consistent with a ring hard reset behaviour where counter gets
incremented only if hard reset succeeded.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25c314aa3ec3d30e4ee282540e2096b5c66a2437)
Cc: stable@vger.kernel.org
|
|
The function radeon_resume_kms() acquires the console lock. It is
inconsistent, as it depends on the notify_client argument. That
lock then covers a number of suspend operations that are unrelated
to the console.
Remove the calls to console_lock() and console_unlock() from the
radeon function. The console lock is only required by DRM's fbdev
emulation, which acquires it as necessary.
Also fixes a possible circular dependency between the console lock
and the client-list mutex, where the mutex is supposed to be taken
first.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fff8e0504499a929f26e2fb7cf7e2c9854e37b91)
|
|
The radeon driver holds the console lock while suspending in-kernel
DRM clients. This creates a circular dependency with the client-list
mutex, which is supposed to be acquired first. Reported when combining
radeon with another DRM driver.
Therefore, do not take the console lock in radeon, but let the fbdev
DRM client acquire the lock when needed. This is what all other DRM
drivers so.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Closes: https://lore.kernel.org/dri-devel/0a087cfd-bd4c-48f1-aa2f-4a3b12593935@oss.qualcomm.com/
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 612ec7c69d04cb58beb1332c2806da9f2f47a3ae)
|
|
In DCN401 pre-blending degamma LUT isn't affecting cursor as in previous
DCN version. As this is not the behavior close to what is expected for
CRTC degamma LUT, disable CRTC degamma LUT property in this HW.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4176
---
When enabling HDR on KDE, it takes the first CRTC 1D LUT available and
apply a color transformation (Gamma 2.2 -> PQ). AMD driver usually
advertises a CRTC degamma LUT as the first CRTC 1D LUT, but it's
actually applied pre-blending. In previous HW version, it seems to work
fine because the 1D LUT was applied to cursor too, but DCN401 presents a
different behavior and the 1D LUT isn't affecting the hardware cursor.
To address the wrong gamma on cursor with HDR (see the link), I came up
with this patch that disables CRTC degamma LUT in this hw, since it
presents a different behavior than others. With this KDE sees CRTC
regamma LUT as the first post-blending 1D LUT available. This is
actually more consistent with AMD color pipeline. It was tested by the
reporter, since I don't have the HW available for local testing and
debugging.
Melissa
---
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 340231cdceec2c45995d773a358ca3c341f151aa)
Cc: stable@vger.kernel.org
|
|
[WHY]
Free memory to avoid memory leak
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Clayton King <clayton.king@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fa699acb8e9be2341ee318077fa119acc7d5f329)
Cc: stable@vger.kernel.org
|
|
Register offsets for v3 and v4 versions are backward compatible. Assign v3
offsets for v4 and all higher versions to avoid end up using v2 offsets.
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250623-rsc_v4-v1-1-275b27bc5e3c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Many of the Rockchip SoCs support storing trim values for the sensors in
factory programmable memory. These values specify a fixed offset from
the sensor's returned temperature to get a more accurate picture of what
temperature the silicon is actually at.
The way this is implemented is with various OTP cells, which may be
absent. There may both be whole-TSADC trim values, as well as per-sensor
trim values.
In the downstream driver, whole-chip trim values override the per-sensor
trim values. This rewrite of the functionality changes the semantics to
something I see as slightly more useful: allow the whole-chip trim
values to serve as a fallback for lacking per-sensor trim values,
instead of overriding already present sensor trim values.
Additionally, the chip may specify an offset (trim_base, trim_base_frac)
in degrees celsius and degrees decicelsius respectively which defines
what the basis is from which the trim, if any, should be calculated
from. By default, this is 30 degrees Celsius, but the chip can once
again specify a different value through OTP cells.
The implementation of these trim calculations have been tested
extensively on an RK3576, where it was confirmed to get rid of pesky 1.8
degree Celsius offsets between certain sensors.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250610-rk3576-tsadc-upstream-v6-5-b6e9efbf1015@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The RK3576 SoC has six TS-ADC channels: TOP, BIG_CORE, LITTLE_CORE,
DDR, NPU and GPU.
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
[ported to mainline, reworded commit message]
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250610-rk3576-tsadc-upstream-v6-3-b6e9efbf1015@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The "v" version specifier here refers to the hardware IP revision.
Mainline deviated from downstream here by calling the v4 revision v3 as
it didn't support the v3 hardware revision at all.
This creates needless confusion, so rename it to rk_tsadcv4_tshut_mode
to be consistent with what the hardware wants to be called.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250610-rk3576-tsadc-upstream-v6-1-b6e9efbf1015@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
without board ID
For GF variant of WCN6855 without board ID programmed
btusb_generate_qca_nvm_name() will chose wrong NVM
'qca/nvm_usb_00130201.bin' to download.
Fix by choosing right NVM 'qca/nvm_usb_00130201_gf.bin'.
Also simplify NVM choice logic of btusb_generate_qca_nvm_name().
Fixes: d6cba4e6d0e2 ("Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The 'quirks' member already ran out of bits on some platforms some time
ago. Replace the integer member by a bitmap in order to have enough bits
in future. Replace raw bit operations by accessor macros.
Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING")
Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE")
Suggested-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_classify_pkt_type
Due to what seem to be a bug with variant version returned by some
firmwares the code may set hdev->classify_pkt_type with
btintel_classify_pkt_type when in fact the controller doesn't even
support ISO channels feature but may use the handle range expected from
a controllers that does causing the packets to be reclassified as ISO
causing several bugs.
To fix the above btintel_classify_pkt_type will attempt to check if the
controller really supports ISO channels and in case it doesn't don't
reclassify even if the handle range is considered to be ISO, this is
considered safer than trying to fix the specific controller/firmware
version as that could change over time and causing similar problems in
the future.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219553
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2100565
Link: https://github.com/StarLabsLtd/firmware/issues/180
Fixes: f25b7fd36cc3 ("Bluetooth: Add vendor-specific packet classification for ISO data")
Cc: stable@vger.kernel.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace sprintf() in *_show() callbacks of sysfs attributes with
sysfs_emit().
While the current implementation works, sysfs_emit() helps to prevent
potential buffer overflows and aligns with kernel documentation
Documentation/filesystems/sysfs.rst.
Tested on an x86_64 system with acpi_tad built as a module:
- Inserted patched acpi_tad.ko successfully
- Verified /sys/devices/platform/ACPI000E:00/time and /caps are
accessible
- Confirmed correct output from 'cat' with no dmesg errors
Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com>
Link: https://patch.msgid.link/20250716123543.495628-1-hsukrut3@gmail.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The memory uncorrected error could be signaled by asynchronous interrupt
(specifically, SPI in arm64 platform), e.g. when an error is detected by
a background scrubber, or signaled by synchronous exception
(specifically, data abort exception in arm64 platform), e.g. when a CPU
tries to access a poisoned cache line. Currently, both synchronous and
asynchronous errors use memory_failure_queue() to schedule
memory_failure() to exectute in a kworker context.
As a result, when a user-space process is accessing a poisoned data, a
data abort is taken and the memory_failure() is executed in the kworker
context, which:
- will send wrong si_code by SIGBUS signal in early_kill mode, and
- can not kill the user-space in some cases resulting a synchronous
error infinite loop
Issue 1: send wrong si_code in early_kill mode
Since commit a70297d22132 ("ACPI: APEI: set memory failure flags as
MF_ACTION_REQUIRED on synchronous events")', the flag MF_ACTION_REQUIRED
could be used to determine whether a synchronous exception occurs on
ARM64 platform. When a synchronous exception is detected, the kernel is
expected to terminate the current process which has accessed a poisoned
page. This is done by sending a SIGBUS signal with error code
BUS_MCEERR_AR, indicating an action-required machine check error on
read.
However, when kill_proc() is called to terminate the processes who has
the poisoned page mapped, it sends the incorrect SIGBUS error code
BUS_MCEERR_AO because the context in which it operates is not the one
where the error was triggered.
To reproduce this problem:
#sysctl -w vm.memory_failure_early_kill=1
vm.memory_failure_early_kill = 1
# STEP2: inject an UCE error and consume it to trigger a synchronous error
#einj_mem_uc single
0: single vaddr = 0xffffb0d75400 paddr = 4092d55b400
injecting ...
triggering ...
signal 7 code 5 addr 0xffffb0d75000
page not present
Test passed
The si_code (code 5) from einj_mem_uc indicates that it is BUS_MCEERR_AO
error and it is not factually correct.
After this change:
# STEP1: enable early kill mode
#sysctl -w vm.memory_failure_early_kill=1
vm.memory_failure_early_kill = 1
# STEP2: inject an UCE error and consume it to trigger a synchronous error
#einj_mem_uc single
0: single vaddr = 0xffffb0d75400 paddr = 4092d55b400
injecting ...
triggering ...
signal 7 code 4 addr 0xffffb0d75000
page not present
Test passed
The si_code (code 4) from einj_mem_uc indicates that it is a BUS_MCEERR_AR
error as expected.
Issue 2: a synchronous error infinite loop
If a user-space process, e.g. devmem, accesses a poisoned page for which
the HWPoison flag is set, kill_accessing_process() is called to send
SIGBUS to current processs with error info. Since the memory_failure()
is executed in the kworker context, it will just do nothing but return
EFAULT. So, devmem will access the posioned page and trigger an
exception again, resulting in a synchronous error infinite loop. Such
exception loop may cause platform firmware to exceed some threshold and
reboot when Linux could have recovered from this error.
To reproduce this problem:
# STEP 1: inject an UCE error, and kernel will set HWPosion flag for related page
#einj_mem_uc single
0: single vaddr = 0xffffb0d75400 paddr = 4092d55b400
injecting ...
triggering ...
signal 7 code 4 addr 0xffffb0d75000
page not present
Test passed
# STEP 2: access the same page and it will trigger a synchronous error infinite loop
devmem 0x4092d55b400
To fix above two issues, queue memory_failure() as a task_work so that
it runs in the context of the process that is actually consuming the
poisoned data.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Tested-by: Ma Wupeng <mawupeng1@huawei.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20250714114212.31660-3-xueshuai@linux.alibaba.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
recovered
If a synchronous error is detected as a result of user-space process
triggering a 2-bit uncorrected error, the CPU will take a synchronous
error exception such as Synchronous External Abort (SEA) on Arm64. The
kernel will queue a memory_failure() work which poisons the related
page, unmaps the page, and then sends a SIGBUS to the process, so that
a system wide panic can be avoided.
However, no memory_failure() work will be queued when abnormal
synchronous errors occur. These errors can include situations like
invalid PA, unexpected severity, no memory failure config support,
invalid GUID section, etc. In such a case, the user-space process will
trigger SEA again. This loop can potentially exceed the platform
firmware threshold or even trigger a kernel hard lockup, leading to a
system reboot.
Fix it by performing a force kill if no memory_failure() work is queued
for synchronous errors.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20250714114212.31660-2-xueshuai@linux.alibaba.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For the i.MX8X and i.MX8 family SoCs, when the Cortex-M core is powered
up and started by the Cortex-A core using the bootloader (e.g., via the
U-Boot bootaux command), both M-core and Linux run within the same SCFW
(System Controller Firmware) partition. With that, Linux has permission
to control the M-core.
But once the M-core is started by the bootloader, the SCFW automatically
enables its clock and sets the clock rate. If Linux later attempts to
enable the same clock via clk_prepare_enable(), the SCFW returns a
'LOCKED' error, as the clock is already configured by the SCFW. This
causes the probe function in imx_rproc.c to fail, leading to the M-core
power domain being shut down while the core is still running. This
results in a fault from the SCU (System Controller Unit) and triggers a
system reset.
To address this issue, ignore handling the clk for i.MX8X and i.MX8
M-core, as SCFW already takes care of enabling and configuring the
clock.
Suggested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20250629172512.14857-3-hiagofranco@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This helper function returns the current power status of a given generic
power domain.
As example, remoteproc/imx_rproc.c can now use this function to check
the power status of the remote core to properly set "attached" or
"offline" modes.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Link: https://lore.kernel.org/r/20250629172512.14857-2-hiagofranco@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Building with W=1 reports the following:
drivers/md/raid10.c: In function ‘sync_request_write’:
drivers/md/raid10.c:2441:21: error: variable ‘d’ set but not used [-Werror=unused-but-set-variable]
2441 | int d;
| ^
cc1: all warnings being treated as errors
Remove the usage of that variable.
Fixes: 752d0464b78a ("md: clean up accounting for issued sync IO")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/linux-raid/20250709104814.2307276-1-john.g.garry@oracle.com
Signed-off-by: Yu Kuai <yukuai@kernel.org>
|
|
This code was changed from using devm_ioremap() which returns NULL to
using devm_ioremap_resource() which returns error pointers. Update
the error checking to match.
Fixes: defe01abfb7f ("spi: stm32-ospi: Use of_reserved_mem_region_to_resource() for "memory-region"")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/fb2a26a2-119b-4b5a-8d44-b29e2c736081@sabinyo.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The presence or absence of the CPPC SBI extension is currently logged
on every boot. This message is not particularly useful and can clutter
the boot log. Remove this debug message to reduce noise during boot.
This change has no functional impact.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Link: https://lore.kernel.org/r/20250711140013.3043463-1-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
On 11 Oct 2022, it was reported that the crc32 verification
of the u-boot environment failed only on big-endian systems
for the u-boot-env nvmem layout driver with the following error.
Invalid calculated CRC32: 0x88cd6f09 (expected: 0x096fcd88)
This problem has been present since the driver was introduced,
and before it was made into a layout driver.
The suggested fix at the time was to use further endianness
conversion macros in order to have both the stored and calculated
crc32 values to compare always represented in the system's endianness.
This was not accepted due to sparse warnings
and some disagreement on how to handle the situation.
Later on in a newer revision of the patch, it was proposed to use
cpu_to_le32() for both values to compare instead of le32_to_cpu()
and store the values as __le32 type to remove compilation errors.
The necessity of this is based on the assumption that the use of crc32()
requires endianness conversion because the algorithm uses little-endian,
however, this does not prove to be the case and the issue is unrelated.
Upon inspecting the current kernel code,
there already is an existing use of le32_to_cpu() in this driver,
which suggests there already is special handling for big-endian systems,
however, it is big-endian systems that have the problem.
This, being the only functional difference between architectures
in the driver combined with the fact that the suggested fix
was to use the exact same endianness conversion for the values
brings up the possibility that it was not necessary to begin with,
as the same endianness conversion for two values expected to be the same
is expected to be equivalent to no conversion at all.
After inspecting the u-boot environment of devices of both endianness
and trying to remove the existing endianness conversion,
the problem is resolved in an equivalent way as the other suggested fixes.
Ultimately, it seems that u-boot is agnostic to endianness
at least for the purpose of environment variables.
In other words, u-boot reads and writes the stored crc32 value
with the same endianness that the crc32 value is calculated with
in whichever endianness a certain architecture runs on.
Therefore, the u-boot-env driver does not need to convert endianness.
Remove the usage of endianness macros in the u-boot-env driver,
and change the type of local variables to maintain the same return type.
If there is a special situation in the case of endianness,
it would be a corner case and should be handled by a unique "compatible".
Even though it is not necessary to use endianness conversion macros here,
it may be useful to use them in the future for consistent error printing.
Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables")
Reported-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://lore.kernel.org/all/20221011024928.1807-1-musashino.open@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: "Michael C. Pratt" <mcpratt@pm.me>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250716144210.4804-1-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Filesystems like resctrl use the cache-id exposed via sysfs to identify
groups of CPUs. The value is also used for PCIe cache steering tags. On
DT platforms cache-id is not something that is described in the
device-tree, but instead generated from the smallest CPU h/w id of the
CPUs associated with that cache.
CPU h/w ids may be larger than 32 bits.
Add a hook to allow architectures to compress the value from the devicetree
into 32 bits. Returning the same value is always safe as cache_of_set_id()
will stop if a value larger than 32 bits is seen.
For example, on arm64 the value is the MPIDR affinity register, which only
has 32 bits of affinity data, but spread accross the 64 bit field. An
arch-specific bit swizzle gives a 32 bit value.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20250711182743.30141-3-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the minimum CPU h/w id of the CPUs associated with the cache for the
cache 'id'. This will provide a stable id value for a given system. As
we need to check all possible CPUs, we can't use the shared_cpu_map
which is just online CPUs. As there's not a cache to CPUs mapping in DT,
we have to walk all CPU nodes and then walk cache levels.
The cache_id exposed to user-space has historically been 32 bits, and
is too late to change. This value is parsed into a u32 by user-space
libraries such as libvirt:
https://github.com/libvirt/libvirt/blob/master/src/util/virresctrl.c#L1588
Give up on assigning cache-id's if a CPU h/w id greater than 32 bits
is found.
match_cache_node() does not make use of the __free() cleanup helpers
because of_find_next_cache_node(prev) does not drop a reference to prev,
and its too easy to accidentally drop the reference on cpu, which belongs
to for_each_of_cpu_node().
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
[ ben: converted to use the __free cleanup idiom ]
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
[ morse: Add checks to give up if a value larger than 32 bits is seen. ]
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20250711182743.30141-2-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- New AMD processor will support different input/output for same command.
- In some scenarios the input value is not cleared, which will be added to
output before reporting the data.
- Clearing input explicitly will be a cleaner and safer approach.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250716110729.2193725-3-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch warnings are reported for below commit,
Commit bb13a84ed6b7 ("misc: amd-sbi: Add support for CPUID protocol")
from Apr 28, 2025 (linux-next), leads to the following Smatch static
checker warning:
drivers/misc/amd-sbi/rmi-core.c:376 apml_rmi_reg_xfer() warn: maybe return -EFAULT instead of the bytes remaining?
drivers/misc/amd-sbi/rmi-core.c:394 apml_mailbox_xfer() warn: maybe return -EFAULT instead of the bytes remaining?
drivers/misc/amd-sbi/rmi-core.c:411 apml_cpuid_xfer() warn: maybe return -EFAULT instead of the bytes remaining?
drivers/misc/amd-sbi/rmi-core.c:428 apml_mcamsr_xfer() warn: maybe return -EFAULT instead of the bytes remaining?
copy_to/from_user() returns number of bytes, not copied.
In case data not copied, return "-EFAULT".
Additionally, fixes the "-EPROTOTYPE" error return as intended.
Fixes: 35ac2034db72 ("misc: amd-sbi: Add support for AMD_SBI IOCTL")
Fixes: bb13a84ed6b7 ("misc: amd-sbi: Add support for CPUID protocol")
Fixes: 69b1ba83d21c ("misc: amd-sbi: Add support for read MCA register protocol")
Fixes: cf141287b774 ("misc: amd-sbi: Add support for register xfer")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aDVyO8ByVsceybk9@stanley.mountain/
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250716110729.2193725-2-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch warnings are reported for below commit,
Commit bb13a84ed6b7 ("misc: amd-sbi: Add support for CPUID protocol")
from Apr 28, 2025 (linux-next), leads to the following Smatch static
checker warning:
drivers/misc/amd-sbi/rmi-core.c:132 rmi_cpuid_read() warn: bitwise OR is zero '0xffffffff00000000 & 0xffff'
drivers/misc/amd-sbi/rmi-core.c:132 rmi_cpuid_read() warn: potential integer overflow from user 'msg->cpu_in_out << 32'
drivers/misc/amd-sbi/rmi-core.c:213 rmi_mca_msr_read() warn: bitwise OR is zero '0xffffffff00000000 & 0xffff'
drivers/misc/amd-sbi/rmi-core.c:213 rmi_mca_msr_read() warn: potential integer overflow from user 'msg->mcamsr_in_out << 32'
CPUID & MCAMSR thread data from input is available at byte 4 & 5, this
patch fixes to copy the user data correctly in the argument.
Previously, CPUID and MCAMSR data is return only for thread 0.
Fixes: bb13a84ed6b7 ("misc: amd-sbi: Add support for CPUID protocol")
Fixes: 69b1ba83d21c ("misc: amd-sbi: Add support for read MCA register protocol")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aDVyO8ByVsceybk9@stanley.mountain/
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250716110729.2193725-1-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In `waveform_common_attach()`, the two timers `&devpriv->ai_timer` and
`&devpriv->ao_timer` are initialized after the allocation of the device
private data by `comedi_alloc_devpriv()` and the subdevices by
`comedi_alloc_subdevices()`. The function may return with an error
between those function calls. In that case, `waveform_detach()` will be
called by the Comedi core to clean up. The check that
`waveform_detach()` uses to decide whether to delete the timers is
incorrect. It only checks that the device private data was allocated,
but that does not guarantee that the timers were initialized. It also
needs to check that the subdevices were allocated. Fix it.
Fixes: 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up")
Cc: stable@vger.kernel.org # 6.15+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250708130627.21743-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some Comedi subdevice instruction handlers are known to access
instruction data elements beyond the first `insn->n` elements in some
cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions
allocate at least `MIN_SAMPLES` (16) data elements to deal with this,
but they do not initialize all of that. For Comedi instruction codes
that write to the subdevice, the first `insn->n` data elements are
copied from user-space, but the remaining elements are left
uninitialized. That could be a problem if the subdevice instruction
handler reads the uninitialized data. Ensure that the first
`MIN_SAMPLES` elements are initialized before calling these instruction
handlers, filling the uncopied elements with 0. For
`do_insnlist_ioctl()`, the same data buffer elements are used for
handling a list of instructions, so ensure the first `MIN_SAMPLES`
elements are initialized for each instruction that writes to the
subdevice.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707161439.88385-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital"
subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and
`COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have
`insn_read` and `insn_write` handler functions, but to have an
`insn_bits` handler function for handling Comedi `INSN_BITS`
instructions. In that case, the subdevice's `insn_read` and/or
`insn_write` function handler pointers are set to point to the
`insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`.
For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the
supplied `data[0]` value is a valid copy from user memory. It will at
least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in
"comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are
allocated. However, if `insn->n` is 0 (which is allowable for
`INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain
uninitialized data, and certainly contains invalid data, possibly from a
different instruction in the array of instructions handled by
`do_insnlist_ioctl()`. This will result in an incorrect value being
written to the digital output channel (or to the digital input/output
channel if configured as an output), and may be reflected in the
internal saved state of the channel.
Fix it by returning 0 early if `insn->n` is 0, before reaching the code
that accesses `data[0]`. Previously, the function always returned 1 on
success, but it is supposed to be the number of data samples actually
read or written up to `insn->n`, which is 0 in this case.
Reported-by: syzbot+cb96ec476fb4914445c9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cb96ec476fb4914445c9
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707153355.82474-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When checking for a supported IRQ number, the following test is used:
/* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */
if ((1 << it->options[1]) & 0x8cec) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fixes: 79e5e6addbb1 ("staging: comedi: das6402: rewrite broken driver")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707135737.77448-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Fixes: ad7a370c8be4 ("staging: comedi: aio_iiro_16: add command support for change of state detection")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707134622.75403-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
