| Age | Commit message (Collapse) | Author |
|---|
|
When checking for a supported IRQ number, the following test is used:
if ((1 << it->options[1]) & board->irq_bits) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts.
Reported-by: syzbot+32de323b0addb9e114ff@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=32de323b0addb9e114ff
Fixes: fcdb427bc7cf ("Staging: comedi: add pcl821 driver")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707133429.73202-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When checking for a supported IRQ number, the following test is used:
/* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test.
Reported-by: syzbot+c52293513298e0fd9a94@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c52293513298e0fd9a94
Fixes: 729988507680 ("staging: comedi: das16m1: tidy up the irq support in das16m1_attach()")
Tested-by: syzbot+c52293513298e0fd9a94@syzkaller.appspotmail.com
Suggested-by: "Enju, Kohei" <enjuk@amazon.co.jp>
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707130908.70758-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct some left shifts of the signed integer constant 1 by some
unsigned number less than 32. Change the constant to 1U to avoid
shifting a 1 into the sign bit.
The corrected functions are comedi_dio_insn_config(),
comedi_dio_update_state(), and __comedi_device_postconfig().
Fixes: e523c6c86232 ("staging: comedi: drivers: introduce comedi_dio_insn_config()")
Fixes: 05e60b13a36b ("staging: comedi: drivers: introduce comedi_dio_update_state()")
Fixes: 09567cb4373e ("staging: comedi: initialize subdevice s->io_bits in postconfig")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707121555.65424-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The handling of the `COMEDI_INSNLIST` ioctl allocates a kernel buffer to
hold the array of `struct comedi_insn`, getting the length from the
`n_insns` member of the `struct comedi_insnlist` supplied by the user.
The allocation will fail with a WARNING and a stack dump if it is too
large.
Avoid that by failing with an `-EINVAL` error if the supplied `n_insns`
value is unreasonable.
Define the limit on the `n_insns` value in the `MAX_INSNS` macro. Set
this to the same value as `MAX_SAMPLES` (65536), which is the maximum
allowed sum of the values of the member `n` in the array of `struct
comedi_insn`, and sensible comedi instructions will have an `n` of at
least 1.
Reported-by: syzbot+d6995b62e5ac7d79557a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d6995b62e5ac7d79557a
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250704120405.83028-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactors shmem_pwrite() to replace the ->write_begin/end logic
with a write_iter-based implementation using kiocb and iov_iter.
While kernel_write() was considered, it caused about 50% performance
regression. vfs_write() is not exported for kernel use. Therefore,
file->f_op->write_iter() is called directly with a synchronously
initialized kiocb to preserve performance and remove write_begin
usage.
Performance results use gem_pwrite on Intel CPU i7-10700
(average of 10 runs):
- ./gem_pwrite --run-subtest bench -s 16384
Before: 0.205s, After: 0.214s
- ./gem_pwrite --run-subtest bench -s 524288
Before: 6.1021s, After: 4.8047s
Part of a series refactoring address_space_operations write_begin and
write_end callbacks to use struct kiocb for passing write context and
flags.
Signed-off-by: Taotao Chen <chentaotao@didiglobal.com>
Link: https://lore.kernel.org/20250716093559.217344-3-chentaotao@didiglobal.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace the write_begin/write_end loop in
i915_gem_object_create_shmem_from_data() with call to kernel_write().
This function initializes shmem-backed GEM objects. kernel_write()
simplifies the code by removing manual folio handling.
Part of a series refactoring address_space_operations write_begin and
write_end callbacks to use struct kiocb for passing write context and
flags.
Signed-off-by: Taotao Chen <chentaotao@didiglobal.com>
Link: https://lore.kernel.org/20250716093559.217344-2-chentaotao@didiglobal.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The lockdep tool can report a circular lock dependency warning in the loop
driver's AIO read/write path:
```
[ 6540.587728] kworker/u96:5/72779 is trying to acquire lock:
[ 6540.593856] ff110001b5968440 (sb_writers#9){.+.+}-{0:0}, at: loop_process_work+0x11a/0xf70 [loop]
[ 6540.603786]
[ 6540.603786] but task is already holding lock:
[ 6540.610291] ff110001b5968440 (sb_writers#9){.+.+}-{0:0}, at: loop_process_work+0x11a/0xf70 [loop]
[ 6540.620210]
[ 6540.620210] other info that might help us debug this:
[ 6540.627499] Possible unsafe locking scenario:
[ 6540.627499]
[ 6540.634110] CPU0
[ 6540.636841] ----
[ 6540.639574] lock(sb_writers#9);
[ 6540.643281] lock(sb_writers#9);
[ 6540.646988]
[ 6540.646988] *** DEADLOCK ***
```
This patch fixes the issue by using the AIO-specific helpers
`kiocb_start_write()` and `kiocb_end_write()`. These functions are
designed to be used with a `kiocb` and manage write sequencing
correctly for asynchronous I/O without introducing the problematic
lock dependency.
The `kiocb` is already part of the `loop_cmd` struct, so this change
also simplifies the completion function `lo_rw_aio_do_completion()` by
using the `iocb` from the `cmd` struct directly, instead of retrieving
the loop device from the request queue.
Fixes: 39d86db34e41 ("loop: add file_start_write() and file_end_write()")
Cc: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250716114808.3159657-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the nvmem_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Srinivas Kandagatla <srini@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250712181905.6738-6-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes minor typo issues for nvmem-core.c:
Corrects "form" to "from" in multiple function descriptions.
Fixes missing closing angle brackets in MODULE_AUTHOR entries.
These changes improve readability and formatting consistency.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250712181905.6738-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250712181905.6738-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the fsi_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Ninad Palsule <ninad@linux.ibm.com>
Cc: linux-fsi@lists.ozlabs.org
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/2025070100-overblown-busily-a04b@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20250703183439.2073555-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a card is present in the reader, the driver currently defers
autosuspend by returning -EAGAIN during the suspend callback to
trigger USB remote wakeup signaling. However, this does not guarantee
that the mmc child device has been resumed, which may cause issues if
it remains suspended while the card is accessible.
This patch ensures that all child devices, including the mmc host
controller, are explicitly resumed before returning -EAGAIN. This
fixes a corner case introduced by earlier remote wakeup handling,
improving reliability of runtime PM when a card is inserted.
Fixes: 883a87ddf2f1 ("misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection")
Cc: stable@vger.kernel.org
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250711140143.2105224-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the RAW SPI accesses with spi-mem API. The latter will fall back to
RAW SPI accesses if spi-mem callbacks are not implemented by a controller
driver.
Notable advantages:
- read function now allocates a bounce buffer for SPI DMA compatibility,
similar to write function;
- the driver can now be used in conjunction with SPI controller drivers
providing spi-mem API only, e.g. spi-nxp-fspi.
- during the initial probe the driver polls busy/ready status bit for 25ms
instead of giving up instantly and hoping that the FW didn't write the
EEPROM
Notes:
- mutex_lock() has been dropped from fm25_aux_read() because the latter is
only being called in probe phase and therefore cannot race with
at25_ee_read() or at25_ee_write()
Quick 4KB block size test with CY15B102Q 256KB F-RAM over spi_omap2_mcspi
driver (no spi-mem ops provided, fallback to raw SPI inside spi-mem):
OP | throughput, KB/s | change
--------+-----------------------+-------
write | 1717.847 -> 1656.684 | -3.6%
read | 1115.868 -> 1059.367 | -5.1%
The lower throughtput probably comes from the 3 messages per SPI transfer
inside spi-mem instead of hand-crafted 2 messages per transfer in the
former at25 code. However, if the raw SPI access is not preserved, then
the driver doesn't grow from the lines-of-code perspective and subjectively
could be considered even a bit simpler.
Higher performance impact on the read operation could be explained by the
newly introduced bounce buffer in read operation. I didn't find any
explanation or guarantee, why would a bounce buffer be not needed on the
read side, so I assume it's a pure luck that nobody read EEPROM into
some variable on stack on an architecture where kernel stack would be
not DMA-able.
Cc: Michael Walle <mwalle@kernel.org>
Cc: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/all/28ab8b72afee1af59b628f7389f0d7f5@kernel.org/
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250702222823.864803-1-alexander.sverdlin@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reproducer executes the host's unlocked_ioctl call in two different
tasks. When init_context fails, the struct vmci_event_ctx is not fully
initialized when executing vmci_datagram_dispatch() to send events to all
vm contexts. This affects the datagram taken from the datagram queue of
its context by another task, because the datagram payload is not initialized
according to the size payload_size, which causes the kernel data to leak
to the user space.
Before dispatching the datagram, and before setting the payload content,
explicitly set the payload content to 0 to avoid data leakage caused by
incomplete payload initialization.
To avoid the oob check failure when executing __compiletime_lessthan()
in memset(), directly use the address of the vmci_event_ctx instance ev
to replace ev.msg.hdr, because their addresses are the same.
Fixes: 28d6692cd8fb ("VMCI: context implementation.")
Reported-by: syzbot+9b9124ae9b12d5af5d95@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9b9124ae9b12d5af5d95
Tested-by: syzbot+9b9124ae9b12d5af5d95@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://lore.kernel.org/r/20250703075334.856445-1-lizhi.xu@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Infineon seems to be confused with the order ID bytes should be presented
by the FRAM chips and to be on the safe side they offer chips which are
either JEDEC conform or the full opposite of the latter.
Examples of the chips which present ID bytes in the reversed order are:
CY15B102QN
CY15B204QSN
Let's support them nevertheless. Except reversing the ID bytes, they also
have quite different density encoding even across EXCELON(tm) family.
The patch has been tested with the above two chips.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250702222927.864875-1-alexander.sverdlin@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CDX_BUS driver uses msi_setup_device_data() which is selected by
GENERIC_MSI_IRQ, thus compile testing without the latter failed:
/usr/bin/ld: drivers/cdx/cdx.o: in function `cdx_probe':
build/drivers/cdx/cdx.c:314: undefined reference to `msi_setup_device_data'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/b2c54a12-480c-448a-8b90-333cb03d9c14@infradead.org/
Fixes: 7f81907b7e3f ("cdx: Enable compile testing")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250716064903.52397-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The error handling is a bit different. "memory-region" is optional, so
failed lookup is not an error. But then an error in
of_reserved_mem_lookup() is treated as an error. However, that
distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250703183455.2074215-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change improves clarity and ensures proper bounds checking in
line with the preferred sysfs_emit() API usage for sysfs 'show'
functions. The PAGE_SIZE check is now handled internally by the helper.
No functional change intended.
Signed-off-by: Abhinav Ananthu <abhinav.ogl@gmail.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20250707074720.40051-2-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Each case tested by the binder allocator test is defined by 3 parameters:
the end alignment type of each requested buffer allocation, whether those
buffers share the front or back pages of the allotted address space, and
the order in which those buffers should be released. The alignment type
represents how a binder buffer may be laid out within or across page
boundaries and relative to other buffers, and it's used along with
whether the buffers cover part (sharing the front pages) of or all
(sharing the back pages) of the vma to calculate the sizes passed into
each test.
binder_alloc_test_alloc recursively generates each possible arrangement
of alignment types and then tests that the binder_alloc code tracks pages
correctly when those buffers are allocated and then freed in every
possible order at both ends of the address space. While they provide
comprehensive coverage, they are poor candidates to be represented as
KUnit test cases, which must be statically enumerated. For 5 buffers and
5 end alignment types, the test case array would have 750,000 entries.
This change structures the recursive calls into meaningful test cases so
that failures are easier to interpret.
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250714185321.2417234-7-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the existing binder_alloc_selftest tests into KUnit tests. These
tests allocate and free an exhaustive combination of buffers with
various sizes and alignments. This change allows them to be run without
blocking or otherwise interfering with other processes in binder.
This test is refactored into more meaningful cases in the subsequent
patch.
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250714185321.2417234-6-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add setup and teardown for testing binder allocator code with KUnit.
Include minimal test cases to verify that tests are initialized
correctly.
Tested-by: Rae Moar <rmoar@google.com>
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250714185321.2417234-5-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Store a pointer to the free pages list that the binder allocator should
use for a process inside of struct binder_alloc. This change allows
binder allocator code to be tested and debugged deterministically while
a system is using binder; i.e., without interfering with other binder
processes and independently of the shrinker. This is necessary to
convert the current binder_alloc_selftest into a kunit test that does
not rely on hijacking an existing binder_proc to run.
A binder process's binder_alloc->freelist should not be changed after
it is initialized. A sole exception is the process that runs the
existing binder_alloc selftest. Its freelist can be temporarily replaced
for the duration of the test because it runs as a single thread before
any pages can be added to the global binder freelist, and the test frees
every page it allocates before dropping the binder_selftest_lock. This
exception allows the existing selftest to be used to check for
regressions, but it will be dropped when the binder_alloc tests are
converted to kunit in a subsequent patch in this series.
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250714185321.2417234-3-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The binder allocator selftest was only checking the last page of buffers
that ended on a page boundary. Correct the page indexing to account for
buffers that are not page-aligned.
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250714185321.2417234-2-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use 'guard(mutex)' and 'guard(spinlock)' for plain (i.e. non-scoped)
mutex- and spinlock-protected sections, respectively, thus making
locking a bit simpler. Briefly tested with 'stress-ng --binderfs'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250626073054.7706-2-dmantipov@yandex.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In 'binderfs_binder_device_create()', use 'kstrdup()' to copy the
newly created device's name, thus making the former a bit simpler.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: "Tiffany Y. Yang" <ynaffit@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250626073054.7706-1-dmantipov@yandex.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to drop the OF node reference taken when creating an auxiliary
device using auxiliary_device_create() when the device is later
released.
Fixes: eaa0d30216c1 ("driver core: auxiliary bus: add device creation helpers")
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20250708084654.15145-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- Added a handler in DRM buddy manager to reset the cleared
flag for the blocks in the freelist.
- This is necessary because, upon resuming, the VRAM becomes
cluttered with BIOS data, yet the VRAM backend manager
believes that everything has been cleared.
v2:
- Add lock before accessing drm_buddy_clear_reset_blocks()(Matthew Auld)
- Force merge the two dirty blocks.(Matthew Auld)
- Add a new unit test case for this issue.(Matthew Auld)
- Having this function being able to flip the state either way would be
good. (Matthew Brost)
v3(Matthew Auld):
- Do merge step first to avoid the use of extra reset flag.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250716075125.240637-2-Arunpravin.PaneerSelvam@amd.com
|
|
The C standard allows 'unsigned' as a shorthand for 'unsigned int'.
For improved code clarity and consistency with the prevailing kernel coding
style, replace the shorthand with the more explicit 'unsigned int' type
for function parameters.
This is a purely stylistic cleanup and has no functional impact on the
generated code.
Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com>
Link: https://patch.msgid.link/20250716095906.21812-1-darshanrathod475@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
1. remove unintentional GPL change
2. using switch case for Device ID probe check.
Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
Link: https://patch.msgid.link/20250716021230.2660564-1-jeff_chang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge the mmc fixes for v6.16-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.17.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The function prefixes for loongson2_mmc_pdata follow two naming
conventions: SoC-based and DMA-based.
First, DMA-based prefixes are the preferred choice, as they clearly
highlight differences, such as prepare_dma; however, for functions
related to SoC, such as reorder_cmd_data, it is agreed to use the
smallest SoC name as the fallback prefix, such as ls2k0500.
No functional change intended.
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250716064421.3823418-1-zhoubinbin@loongson.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There is a cut and paste bug so we accidentally return the wrong
variable. It should be "ret" instead of PTR_ERR(host->clk).
Fixes: 2115772014bd ("mmc: loongson2: Add Loongson-2K SD/SDIO controller driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/847bf395-6d62-49c9-a39d-8e82c5b17bf7@sabinyo.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
A new warning in clang [1] points out that id_reg is uninitialized then
passed to memstick_init_req() as a const pointer:
drivers/memstick/core/memstick.c:330:59: error: variable 'id_reg' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
330 | memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg,
| ^~~~~~
Commit de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull
warning") intentionally passed this variable uninitialized to avoid an
-Wnonnull warning from a NULL value that was previously there because
id_reg is never read from the call to memstick_init_req() in
h_memstick_read_dev_id(). Just zero initialize id_reg to avoid the
warning, which is likely happening in the majority of builds using
modern compilers that support '-ftrivial-auto-var-init=zero'.
Cc: stable@vger.kernel.org
Fixes: de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull warning")
Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2105
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250715-memstick-fix-uninit-const-pointer-v1-1-f6753829c27a@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The ovpn_netdev_write() function is responsible for injecting
decapsulated and decrypted packets back into the local network stack.
Prior to this patch, the skb could retain GSO metadata from the outer,
encrypted tunnel packet. This original GSO metadata, relevant to the
sender's transport context, becomes invalid and misleading for the
tunnel/data path once the inner packet is exposed.
Leaving this stale metadata intact causes internal GSO validation checks
further down the kernel's network stack (validate_xmit_skb()) to fail,
leading to packet drops. The reasons for these failures vary by
protocol, for example:
- for ICMP, no offload handler is registered;
- for TCP and UDP, the respective offload handlers return errors when
comparing skb->len to the outdated skb_shinfo(skb)->gso_size.
By calling skb_gso_reset(skb) we ensure the inner packet is presented to
gro_cells_receive() with a clean state, correctly indicating it is an
individual packet from the perspective of the local stack.
This change eliminates the "Driver has suspect GRO implementation, TCP
performance may be compromised" warning and improves overall TCP
performance by allowing GSO/GRO to function as intended on the
decapsulated traffic.
Fixes: 11851cbd60ea ("ovpn: implement TCP transport")
Reported-by: Gert Doering <gert@greenie.muc.de>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/4
Tested-by: Gert Doering <gert@greenie.muc.de>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Netlink ops do not expect all attributes to be always set, however
this condition is not explicitly coded any where, leading the user
to believe that all sent attributes are somewhat processed.
Fix this behaviour by introducing explicit checks.
For CMD_OVPN_PEER_GET and CMD_OVPN_KEY_GET directly open-code the
needed condition in the related ops handlers.
While for all other ops use attribute subsets in the ovpn.yaml spec file.
Fixes: b7a63391aa98 ("ovpn: add basic netlink support")
Reported-by: Ralf Lici <ralf@mandelbit.com>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/19
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
OpenVPN allows users to configure a FW mark on sockets used to
communicate with other peers. The mark is set by means of the
`SO_MARK` Linux socket option.
However, in the ovpn UDP code path, the socket's `sk_mark` value is
currently ignored and it is not propagated to outgoing `skbs`.
This commit ensures proper inheritance of the field by setting
`skb->mark` to `sk->sk_mark` before handing the `skb` to the network
stack for transmission.
Fixes: 08857b5ec5d9 ("ovpn: implement basic TX path (UDP)")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Link: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31877.html
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
gbphy_dev_match_id() should be taking a const pointer, as the pointer
passed to it from the container_of() call was const to start with (it
was accidentally cast away with the call.) Fix this all up by correctly
marking the pointer types.
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/2025070115-reoccupy-showy-e2ad@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the interrupt enable register offset (inten_offset) so that GPIO
interrupts can be enabled normally on more models.
According to the latest interface specifications, the definition of GPIO
interrupts in ACPI is similar to that in FDT. The GPIO interrupts are
listed one by one according to the GPIO number, and the corresponding
interrupt number can be obtained directly through the GPIO number
specified by the consumer.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250714064542.2276247-1-zhoubinbin@loongson.cn
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There's no need to call need_resched() because cond_resched() will do
nothing if need_resched() returns false.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/5a11ad09-5508-933c-f044-6a236bf00557@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reorder local variables in ni16550_probe to follow reverse Christmas
tree style.
Cc: Jason Smith <jason.smith@emerson.com>
Cc: Gratian Crisan <gratian.crisan@emerson.com>
Signed-off-by: Chaitanya Vadrevu <chaitanya.vadrevu@emerson.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250711200418.1858682-3-chaitanya.vadrevu@emerson.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allocate memory on heap instead of stack to fix following warning that
clang version 20.1.2 produces on W=1 build.
drivers/tty/serial/8250/8250_ni.c:277:12: warning: stack frame size (1072) exceeds limit (1024) in 'ni16550_probe' [-Wframe-larger-than]
277 | static int ni16550_probe(struct platform_device *pdev)
| ^
1 warning generated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507030557.vIewJJQO-lkp@intel.com/
Cc: Jason Smith <jason.smith@emerson.com>
Cc: Gratian Crisan <gratian.crisan@emerson.com>
Signed-off-by: Chaitanya Vadrevu <chaitanya.vadrevu@emerson.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250711200418.1858682-2-chaitanya.vadrevu@emerson.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Renesas SuperH SCI(F) serial port driver from
SIMPLE_DEV_PM_OPS() to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr().
This lets us drop the __maybe_unused annotations from its suspend and
resume callbacks, and reduces kernel size in case CONFIG_PM or
CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a5628fe028362ae3f8729021a7864dd39f7869bf.1752086885.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Unlock before returning if vprbrd_gpiob_setdir() fails.
Fixes: 55e2d1eec110 ("gpio: viperboard: use new GPIO line value setter callbacks")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9e72018c-e46e-4e55-83e4-503da4d022fc@sabinyo.mountain
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Remove the completed task tracking the rework of the sysfs interface and
add a new task to track the removal of the legacy bits and pieces.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-10-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add a Kconfig switch allowing to disable the legacy parts of the GPIO
sysfs interface. This means that even though we keep the
/sys/class/gpio/ directory, it no longer contains the global
export/unexport attribute pair (instead, the user should use the
per-chip export/unpexport) nor the gpiochip$BASE entries. This option
default to y if GPIO sysfs is enabled but we'll default it to n at some
point in the future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-9-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As a way to allow the user-space to stop referring to GPIOs by their
global numbers, introduce a parallel group of line attributes for
exported GPIO that live inside the GPIO chip class device and are
referred to by their HW offset within their parent chip.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-8-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In preparation for adding a parallel, per-chip attribute group for
exported GPIO lines, stop using class device APIs to refer to it in the
code. When unregistering the chip, don't call class_find_device() but
instead store exported lines in a linked list inside the GPIO chip data
object and look it up there.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-7-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Currently each exported GPIO is represented in sysfs as a separate class
device. This allows us to simply use dev_get_drvdata() to retrieve the
pointer passed to device_create_with_groups() from sysfs ops callbacks.
However, we're preparing to add a parallel set of per-line sysfs
attributes that will live inside the associated gpiochip group. They are
not registered as class devices and so have the parent device passed as
argument to their callbacks (the GPIO chip class device).
Put the attribute structs inside the GPIO descriptor data and
dereference the relevant ones using container_of() in the callbacks.
This way, we'll be able to reuse the same code for both the legacy and
new GPIO attributes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-6-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In preparation for future commits which will make use of descriptor AND
GPIO-device data in the same functions rename the former from data to
desc_data separately which will make future changes smaller and easier
to read.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-5-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
