| Age | Commit message (Collapse) | Author |
|---|
|
WQEs must not cross page boundaries, they are padded with NOPs if they
don't fit the page. mlx5e_mpwrq_total_umr_wqebbs doesn't take into
account this padding, risking reserving not enough space.
The padding is not straightforward to add to this calculation, because
WQEs of different sizes may be mixed together in the queue. If each page
ends with a big WQE that doesn't fit and requires at most its size minus
1 WQEBB of padding, the total space can be much bigger than in case when
smaller WQEs take advantage of this padding.
Replace the wrong exact calculation by the following estimation. Each
padding can be at most the size of the maximum WQE used in the queue
minus one WQEBB. Let's call the rest of the page "useful space". If we
divide the total size of all needed WQEs by this useful space, rounding
up, we'll get the number of pages, which is enough to contain all these
WQEs. It's correct, because every WQE that appeared on the boundary
between two blocks of useful space would start in the useful space of
one page and end in the padding of the same page, while our estimation
reserved space for its tail in the next space, making the estimation not
smaller than the real space occupied in the queue.
The code actually uses a looser estimation: instead of taking the
maximum size of all used WQE types minus 1 WQEBB, it takes the maximum
hardware size of a WQE. It's made for simplicity and extensibility.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UMR MTTs used in striding RQ have certain alignment requirements. While
it's guaranteed to work when UMR pages are aligned to the UMR page size,
in practice it works then UMR pages are aligned to 8 bytes. However,
it's still not enough flexibility for the unaligned mode of XSK. This
patch leverages KSM to map UMR pages without alignment requirements,
when unaligned XSK is active. The downside is that KSM entries are twice
as big as MTTs, which limits the maximum WQE size, so regular RQs and
aligned XSK continue using MTTs.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some commands use a flexible array after a common header. Add a macro to
safely calculate the total input length of the command, detecting
overflows and printing errors with specific values when such overflows
happen.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, rq->mkey_be keeps a big-endian value of either the PA MKey
(for legacy RQ, no address translation) or MTT MKey (for striding RQ,
direct address translation). Striding RQ stores the same value in
rq->umr_mkey in the native endianness.
The next commit will make striding RQ use KSM MKey (indirect address
translation) for the unaligned mode of XSK, which will require storing
both KSM MKey and PA MKey in the RQ struct. This commit optimizes fields
of mlx5e_rq: umr_mkey is removed (it's redundant), mkey_be always points
to the PA MKey, and mpwqe.umr_mkey_be points to the MTT MKey (or to the
KSM MKey, starting from the next commit).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XSK RQs support striding RQ linear mode, but the stride size is always
set to PAGE_SIZE. It may be larger than the XSK frame size,
unnecessarily reducing the useful space in a WQE, but more importantly
causing UMEM data corruption in certain cases.
Normally, stride size bigger than XSK frame size is not a problem if the
hardware enforces the MTU. However, traffic between vports skips the
hardware MTU check, and oversized packets may be received.
If an oversized packet is bigger than the XSK frame but not bigger than
the stride, it will cause overwriting of the adjacent UMEM region. If
the packet takes more than one stride, they can be recycled for reuse
so it's not a problem when the XSK frame size matches the stride size.
To reduce the impact of the above issue, attempt to use the MTT page
size for striding RQ that matches the XSK frame size, allowing to safely
use 2048-byte frames on an up-to-date firmware.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit allows striding RQ to determine MTT page size at runtime,
instead of sticking to the compile-time PAGE_SIZE. This functionality
will be used by a following commit that adjusts the MTT page size to the
XSK frame size.
Stick with PAGE_SIZE for XSK on legacy RQ, as frag_stride is not used in
data path, it only helps calculate how pages are partitioned into
fragments, and PAGE_SIZE will ensure each fragment starts at the
beginning of a new allocation unit (XSK frame).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
if io_uring sends passthrough command with IORING_URING_CMD_FIXED flag,
use the pre-registered buffer for IO (non-vectored variant). Pass the
buffer/length to io_uring and get the bvec iterator for the range. Next,
pass this bvec to block-layer and obtain a bio/request for subsequent
processing.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-13-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is a prep patch. Modify nvme_submit_user_cmd and
nvme_map_user_request to take ubuffer as plain integer
argument, and do away with nvme_to_user_ptr conversion in callers.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-12-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nvme_alloc_request expects a large number of parameters.
Split this out into two functions to reduce number of parameters.
First one retains the name nvme_alloc_request, while second one is
named nvme_map_user_request.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-8-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass struct request rather than bio. It helps to kill a parameter, and
some processing clean-up too.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-7-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
User blk_rq_map_user_io instead of duplicating the same code at
different places
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-6-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the new blk_rq_map_user_io helper instead of duplicating code at
various places. Additionally this also takes advantage of the on-stack
iov fast path.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-5-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that the normal passthrough end_io path doesn't need the request
anymore, we can kill the explicit blk_mq_free_request() and just pass
back RQ_END_IO_FREE instead. This enables the batched completion from
freeing batches of requests at the time.
This brings passthrough IO performance at least on par with bdev based
O_DIRECT with io_uring. With this and batche allocations, peak performance
goes from 110M IOPS to 122M IOPS. For IRQ based, passthrough is now also
about 10% faster than previously, going from ~61M to ~67M IOPS.
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By splitting up the metadata and non-metadata end_io handling, we can
remove any request dependencies on the normal non-metadata IO path. This
is in preparation for enabling the normal IO passthrough path to pass
the ownership of the request back to the block layer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Everything is just converted to returning RQ_END_IO_NONE, and there
should be no functional changes with this patch.
In preparation for allowing the end_io handler to pass ownership back
to the block layer, rather than retain ownership of the request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-6.1/io_uring: (56 commits)
io_uring/net: fix notif cqe reordering
io_uring/net: don't update msg_name if not provided
io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
io_uring/rw: defer fsnotify calls to task context
io_uring/net: fix fast_iov assignment in io_setup_async_msg()
io_uring/net: fix non-zc send with address
io_uring/net: don't skip notifs for failed requests
io_uring/rw: don't lose short results on io_setup_async_rw()
io_uring/rw: fix unexpected link breakage
io_uring/net: fix cleanup double free free_iov init
io_uring: fix CQE reordering
io_uring/net: fix UAF in io_sendrecv_fail()
selftest/net: adjust io_uring sendzc notif handling
io_uring: ensure local task_work marks task as running
io_uring/net: zerocopy sendmsg
io_uring/net: combine fail handlers
io_uring/net: rename io_sendzc()
io_uring/net: support non-zerocopy sendto
io_uring/net: refactor io_setup_async_addr
io_uring/net: don't lose partial send_zc on fail
...
|
|
* for-6.1/block: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the patch "588b9e85609b (usb: gadget: uvc: add v4l2 enumeration api
calls)" the driver is keeping a list of configfs entries currently
configured. The list is used in uvc_v4l2 on runtime.
The driver now is giving back the list item just after it was referenced
with config_item_put. It also calls config_item_put on uvc_free, which
is the only and right place to give back the reference. This patch fixes
the issue by removing the extra config_item_put in uvc_alloc.
Fixes: 588b9e85609b (usb: gadget: uvc: add v4l2 enumeration api calls)
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220930122839.1747279-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The following message is seen during boot and the activation of
console port gets delayed until normal serial ports activation.
[ 0.001346] irq: no irq domain found for pic@930 !
The console port doesn't need irq, perform irq reservation later,
during cpm_uart probe.
While at it, don't use NO_IRQ but 0 which is the value returned
by irq_of_parse_and_map() in case of error. By chance powerpc's
NO_IRQ has value 0 but on some architectures it is -1.
Fixes: 14d893fc6846 ("powerpc/8xx: Convert CPM1 interrupt controller to platform_device")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/8bed0f30c2e9ef16ae64fb1243a16d54a48eb8da.1664526717.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
port->lock is unlocked in each branch in altera_jtaguart_console_putc(),
so do it before the "if". "status" needs not be under the lock, as the
register was already read.
Cc: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20220927111819.18516-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
TX space reads from the control register are performed in various forms
on 4 places in altera_jtaguart. Unify all those and do the read and
masking on a single place.
The new helper altera_jtaguart_tx_space() uses FIELD_GET(), so we can
drop ALTERA_JTAGUART_CONTROL_WSPACE_OFF now.
Cc: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20220927111819.18516-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
FIELD_GET() can do the job smarter and more readable. We don't even need
ASCFSTAT_TXFREEOFF. So switch to the former and remove the latter.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220927111819.18516-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is one more place where lqasc_tx_ready() can be used now:
lqasc_console_putchar(). So replace the open-coded variant by the
helper.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220927111819.18516-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no issue compiling pxa.c even in the SERIAL_8250=y case. So to
cover it in the usual configurations, add "|| COMPILE_TEST" there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220927110528.12815-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If CONFIG_SERIAL_EARLYCON and CONFIG_OF are both not set,
gcc warns about unused variable:
drivers/tty/serial/stm32-usart.c:83:32: error: ‘stm32h7_info’ defined but not used [-Werror=unused-variable]
static struct stm32_usart_info stm32h7_info = {
^~~~~~~~~~~~
drivers/tty/serial/stm32-usart.c:61:32: error: ‘stm32f7_info’ defined but not used [-Werror=unused-variable]
static struct stm32_usart_info stm32f7_info = {
^~~~~~~~~~~~
drivers/tty/serial/stm32-usart.c:40:32: error: ‘stm32f4_info’ defined but not used [-Werror=unused-variable]
static struct stm32_usart_info stm32f4_info = {
^~~~~~~~~~~~
cc1: all warnings being treated as errors
Mark these variables as __maybe_unused to fix this.
Fixes: c7039ce904c0 ("serial: stm32: make info structs static to avoid sparse warnings")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220926025826.44145-1-renzhijie2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver makes use of `__clk_is_enabled()` in order to
know whether a `clk_disable_unprepare()` is needed or not on the
GCLK, a new dependency has been introduced: COMMON_CLK. If this
`CONFIG_COMMON_CLK` is not enabled, whatever config may have this
driver enabled without COMMON_CLK then an undefined reference to
`__clk_is_enabled()` will be issued by the linker.
Thus, make sure that, unless `CONFIG_COMMON_CLK` is enabled, this
driver is not compiled.
Fixes: 5e3ce1f26129 ("tty: serial: atmel: Make the driver aware of the existence of GCLK")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220926143244.485578-1-sergiu.moga@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated.
[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20220927003927.1942170-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable Bandwidth to bandwidth to avoid CamelCase
which is not accepted by checkpatch.pl .
Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20220928180350.GA82748@zephyrus
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function PHY_RFConfig8188E() is just a wrapper around
phy_RF6052_Config_ParaFile(). Remove the wrapper.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928083641.8275-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function PHY_RF6052_Config8188E() is just a wrapper around
phy_RF6052_Config_ParaFile(). Remove the wrapper.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928083641.8275-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function ODM_ReadAndConfig_AGC_TAB_1T_8188E() has return type
'enum HAL_STATUS'. Convert the return type to int and use common
kernel error logic. Return 0 on success and negative values on
failure. The enum HAL_STATUS is unused now and we can remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928144323.13164-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function ODM_ReadAndConfig_PHY_REG_1T_8188E() has return type
'enum HAL_STATUS'. Convert the return type to int and use common
kernel error logic. Return 0 on success and negative values on
failure. The goal is to get rid of enum HAL_STATUS in the end.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928144323.13164-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function ODM_ReadAndConfig_RadioA_1T_8188E() has return type
'enum HAL_STATUS'. Convert the return type to int and use common
kernel error logic. Return 0 on success and negative values on
failure. The goal is to get rid of enum HAL_STATUS in the end.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928144323.13164-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function ODM_ReadAndConfig_MAC_REG_8188E() has return type
'enum HAL_STATUS'. Convert the return type to int and use common
kernel error logic. Return 0 on success and negative values on
failure. The goal is to get rid of enum HAL_STATUS in the end.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20220928144323.13164-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Increase the SPMI transaction timeout delay from 100 us to
1000 us in order to account for the slower execution time
found on some simulator targets.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-11-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-10-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The system crashes due to an access permission violation when
writing to a PMIC peripheral which is not owned by the current
ee. Add a check for PMIC arbiter version 5 for such invalid
write requests and return an error instead of crashing the
system.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-8-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-9-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct the way that duplicate PPID mappings are handled for PMIC
arbiter v5. The final APID mapped to a given PPID should be the
one which has write owner = APPS EE, if it exists, or if not
that, then the first APID mapped to the PPID, if it exists.
Fixes: 40f318f0ed67 ("spmi: pmic-arb: add support for HW version 5")
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-7-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-8-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current implementation of SPMI arbiter dispatches interrupt based on the
Arbiter's accumulator status, in some cases the accumulator status may
remain zero and the interrupt remains un-handled. Add logic to dispatch
interrupts based Arbiter's IRQ status if the accumulator status is zero.
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-6-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-7-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check that the apid for an SPMI interrupt falls between the
min_apid and max_apid that can be handled by the APPS processor
before invoking the per-apid interrupt handler:
periph_interrupt().
This avoids an access violation in rare cases where the status
bit is set for an interrupt that is not owned by the APPS
processor.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-5-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-6-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, cleanup_irq() is invoked when a peripheral's interrupt
fires and there is no mapping present in the interrupt domain of
spmi interrupt controller.
The cleanup_irq clears the arbiter bit, clears the pmic interrupt
and disables it at the pmic in that order. The last disable in
cleanup_irq races with request_irq() in that it stomps over the
enable issued by request_irq. Fix this by not writing to the pmic
in cleanup_irq. The latched bit will be left set in the pmic,
which will not send us more interrupts even if the enable bit
stays enabled.
When a client wants to request an interrupt, use the activate
callback on the irq_domain to clear latched bit. This ensures
that the latched, if set due to the above changes in cleanup_irq
or when the bootloader leaves it set, gets cleaned up, paving way
for upcoming interrupts to trigger.
With this, there is a possibility of unwanted triggering of
interrupt right after the latched bit is cleared - the interrupt
may be left enabled too. To avoid that, clear the enable first
followed by clearing the latched bit in the activate callback.
Fixes: 6bc546e71e50 ("spmi: pmic-arb: cleanup unrequested irqs")
Fixes: 02abec3616c1 ("spmi: pmic-arb: rename pa_xx to pmic_arb_xx and other cleanup")
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
[collinsd@codeaurora.org: fix merge conflict]
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-4-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-5-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Call handle_bad_irq() when the summary interrupt is fired spuriously.
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-3-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-4-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The cleanup_irq() was meant to clear and mask interrupts that were
left enabled in the hardware but there was no interrupt handler
registered for it. Add an error print when it gets invoked.
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-2-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use ida_alloc()/ida_free() instead of deprecated
ida_simple_get()/ida_simple_remove() .
Signed-off-by: keliu <liuke94@huawei.com>
Link: https://lore.kernel.org/r/20220527071338.2359733-1-liuke94@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220930005019.2663064-2-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ECAP hardware on TI AM62x SoC supports capture feature. It can be used
to timestamp events (falling/rising edges) detected on input signal.
This commit adds capture driver support for ECAP hardware on AM62x SoC.
In the ECAP hardware, capture pin can also be configured to be in
PWM mode. Current implementation only supports capture operating mode.
Hardware also supports timebase sync between multiple instances, but
this driver supports simple independent capture functionality.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20220923142437.271328-4-jpanis@baylibre.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/25644ce1f2fd15d116977770ede20e024f658513.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The COUNTER_COMP_ARRAY Counter component type is introduced to enable
support for Counter array components. With Counter array components,
exposure for buffers on counter devices can be defined via new Counter
array component macros. This should simplify code for driver authors who
would otherwise need to define individual Counter components for each
array element.
Eight Counter array component macros are introduced::
DEFINE_COUNTER_ARRAY_U64(_name, _length)
DEFINE_COUNTER_ARRAY_CAPTURE(_name, _length)
DEFINE_COUNTER_ARRAY_POLARITY(_name, _enums, _length)
COUNTER_COMP_DEVICE_ARRAY_U64(_name, _read, _write, _array)
COUNTER_COMP_COUNT_ARRAY_U64(_name, _read, _write, _array)
COUNTER_COMP_SIGNAL_ARRAY_U64(_name, _read, _write, _array)
COUNTER_COMP_ARRAY_CAPTURE(_read, _write, _array)
COUNTER_COMP_ARRAY_POLARITY(_read, _write, _array)
Eight Counter array callbacks are introduced as well::
int (*signal_array_u32_read)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u32 *val);
int (*signal_array_u32_write)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u32 val);
int (*device_array_u64_read)(struct counter_device *counter,
size_t idx, u64 *val);
int (*count_array_u64_read)(struct counter_device *counter,
struct counter_count *count,
size_t idx, u64 *val);
int (*signal_array_u64_read)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u64 *val);
int (*device_array_u64_write)(struct counter_device *counter,
size_t idx, u64 val);
int (*count_array_u64_write)(struct counter_device *counter,
struct counter_count *count,
size_t idx, u64 val);
int (*signal_array_u64_write)(struct counter_device *counter,
struct counter_signal *signal,
size_t idx, u64 val);
Driver authors can handle reads/writes for an array component by
receiving an element index via the `idx` parameter and processing the
respective value via the `val` parameter.
For example, suppose a driver wants to expose a Count's read-only
capture buffer of four elements using a callback
`foobar_capture_read()`::
DEFINE_COUNTER_ARRAY_CAPTURE(foobar_capture_array, 4);
COUNTER_COMP_ARRAY_CAPTURE(foobar_capture_read, NULL,
foobar_capture_array)
Respective sysfs attributes for each array element would appear for the
respective Count:
* /sys/bus/counter/devices/counterX/countY/capture0
* /sys/bus/counter/devices/counterX/countY/capture1
* /sys/bus/counter/devices/counterX/countY/capture2
* /sys/bus/counter/devices/counterX/countY/capture3
If a user tries to read _capture2_ for example, `idx` will be `2` when
passed to the `foobar_capture_read()` callback, and thus the driver
knows which array element to handle.
Counter arrays for polarity elements can be defined in a similar
manner as u64 elements::
const enum counter_signal_polarity foobar_polarity_states[] = {
COUNTER_SIGNAL_POLARITY_POSITIVE,
COUNTER_SIGNAL_POLARITY_NEGATIVE,
};
DEFINE_COUNTER_ARRAY_POLARITY(foobar_polarity_array,
foobar_polarity_states, 4);
COUNTER_COMP_ARRAY_POLARITY(foobar_polarity_read,
foobar_polarity_write,
foobar_polarity_array)
Tested-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/5310c22520aeae65b1b74952419f49ac4c8e1ec1.1664204990.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/a51fd608704bdfc5a0efa503fc5481df34241e0a.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Counter extensions are handled for the Device, Counts, and Signals. The
code loops through each Counter extension and creates the expected sysfs
attributes. This patch consolidates that code into functions to reduce
redundancy and make the intention of the code clearer.
Link: https://lore.kernel.org/r/6f2121cf52073028c119dbf981a8b72f3eb625d2.1664204990.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/0469c3ae3fbccbca908993c78d94f221761a6a3a.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 104-quad-8 driver provides support for Index signal polarity modes
via the "index_polarity" Signal component. This patch exposes the same
functionality through the more standard "polarity" Signal component.
Link: https://lore.kernel.org/r/01d00c21873159833035cb6775d0d0e8ad55f2ef.1664204990.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/0bf840beee1665e9f04ea82368ecdde87c791a22.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Signal polarity component represents the active level of a
respective Signal. There are two possible states: positive (rising edge)
and negative (falling edge); enum counter_signal_polarity represents
these states. A convenience macro COUNTER_COMP_POLARITY() is provided
for driver authors to declare a Signal polarity component.
Cc: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/8f47d6e1db71a11bb1e2666f8e2a6e9d256d4131.1664204990.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/b6e53438badcb6318997d13dd2fc052f97d808ac.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The interrupt-cnt counter driver only pushes one type of event on only
one channel: COUNTER_EVENT_CHANGE_OF_STATE on channel 0. The
interrupt_cnt_watch_validate() watch_valid callback is implemented to
ensure watch configurations are valid for this driver.
Cc: Oleksij Rempel <linux@rempel-privat.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Link: https://lore.kernel.org/r/20220815225058.144203-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/c50b5eede7d3f523de8dc3937dc44680f2773e1d.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Counter subsystem symbols are only relevant to counter drivers. A
COUNTER namespace is created to control the availability of these
symbols to modules that import this namespace explicitly.
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Oleksij Rempel <linux@rempel-privat.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Kamel Bouhara <kamel.bouhara@bootlin.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220815220321.74161-1-william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/8a756df96c24946547a7ece5caa5f654809c5e7f.1664318353.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
