summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-09-29net: enetc: cache accesses to &priv->si->hwVladimir Oltean
The &priv->si->hw construct dereferences 2 pointers and makes lines longer than they need to be, in turn making the code harder to read. Replace &priv->si->hw accesses with a "hw" variable when there are 2 or more accesses within a function that dereference this. This includes loops, since &priv->si->hw is a loop invariant. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29net: dsa: hellcreek: Offload per-tc max SDU from tc-taprioKurt Kanzenbach
Add support for configuring the max SDU per priority and per port. If not specified, keep the default. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29net: dsa: hellcreek: refactor hellcreek_port_setup_tc() to use switch/caseVladimir Oltean
The following patch will need to make this function also respond to TC_QUERY_BASE, so make the processing more structured around the tc_setup_type. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29net: dsa: felix: offload per-tc max SDU from tc-taprioVladimir Oltean
Our current vsc9959_tas_guard_bands_update() algorithm has a limitation imposed by the hardware design. To avoid packet overruns between one gate interval and the next (which would add jitter for scheduled traffic in the next gate), we configure the switch to use guard bands. These are as large as the largest packet which is possible to be transmitted. The problem is that at tc-taprio intervals of sizes comparable to a guard band, there isn't an obvious place in which to split the interval between the useful portion (for scheduling) and the guard band portion (where scheduling is blocked). For example, a 10 us interval at 1Gbps allows 1225 octets to be transmitted. We currently split the interval between the bare minimum of 33 ns useful time (required to schedule a single packet) and the rest as guard band. But 33 ns of useful scheduling time will only allow a single packet to be sent, be that packet 1200 octets in size, or 60 octets in size. It is impossible to send 2 60 octets frames in the 10 us window. Except that if we reduced the guard band (and therefore the maximum allowable SDU size) to 5 us, the useful time for scheduling is now also 5 us, so more packets could be scheduled. The hardware inflexibility of not scheduling according to individual packet lengths must unfortunately propagate to the user, who needs to tune the queueMaxSDU values if he wants to fit more small packets into a 10 us interval, rather than one large packet. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29vhost/vsock: Use kvmalloc/kvfree for larger packets.Junichi Uekawa
When copying a large file over sftp over vsock, data size is usually 32kB, and kmalloc seems to fail to try to allocate 32 32kB regions. vhost-5837: page allocation failure: order:4, mode:0x24040c0 Call Trace: [<ffffffffb6a0df64>] dump_stack+0x97/0xdb [<ffffffffb68d6aed>] warn_alloc_failed+0x10f/0x138 [<ffffffffb68d868a>] ? __alloc_pages_direct_compact+0x38/0xc8 [<ffffffffb664619f>] __alloc_pages_nodemask+0x84c/0x90d [<ffffffffb6646e56>] alloc_kmem_pages+0x17/0x19 [<ffffffffb6653a26>] kmalloc_order_trace+0x2b/0xdb [<ffffffffb66682f3>] __kmalloc+0x177/0x1f7 [<ffffffffb66e0d94>] ? copy_from_iter+0x8d/0x31d [<ffffffffc0689ab7>] vhost_vsock_handle_tx_kick+0x1fa/0x301 [vhost_vsock] [<ffffffffc06828d9>] vhost_worker+0xf7/0x157 [vhost] [<ffffffffb683ddce>] kthread+0xfd/0x105 [<ffffffffc06827e2>] ? vhost_dev_set_owner+0x22e/0x22e [vhost] [<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3 [<ffffffffb6eb332e>] ret_from_fork+0x4e/0x80 [<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3 Work around by doing kvmalloc instead. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Signed-off-by: Junichi Uekawa <uekawa@chromium.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20220928064538.667678-1-uekawa@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29clk: fixed-rate: add devm_clk_hw_register_fixed_rateDmitry Baryshkov
Add devm_clk_hw_register_fixed_rate(), devres-managed helper to register fixed-rate clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220916061740.87167-3-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-29clk: asm9260: use parent index to link the reference clockDmitry Baryshkov
Rewrite clk-asm9260 to use parent index to use the reference clock. During this rework two helpers are added: - clk_hw_register_mux_table_parent_data() to supplement clk_hw_register_mux_table() but using parent_data instead of parent_names - clk_hw_register_fixed_rate_parent_accuracy() to be used instead of directly calling __clk_hw_register_fixed_rate(). The later function is an internal API, which is better not to be called directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220916061740.87167-2-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-09-29ACPI: HMAT: Release platform device in case of platform_device_add_data() failsLin Yujun
The platform device is not released when platform_device_add_data() fails. And platform_device_put() perfom one more pointer check than put_device() to check for errors in the 'pdev' pointer. Use platform_device_put() to release platform device in platform_device_add()/platform_device_add_data()/ platform_device_add_resources() error case. Fixes: c01044cc8191 ("ACPI: HMAT: refactor hmat_register_target_device to hmem_register_device") Signed-off-by: Lin Yujun <linyujun809@huawei.com> Link: https://lore.kernel.org/r/20220914033755.99924-1-linyujun809@huawei.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-09-29dax: Remove usage of the deprecated ida_simple_xxx APIBo Liu
ida_alloc_max() makes it clear that the second argument is inclusive, and the alloc/free terminology is more idiomatic and symmetric then get/remove. Signed-off-by: Bo Liu <liubo03@inspur.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220926012635.3205-1-liubo03@inspur.com [djbw: reword changelog] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-09-29libnvdimm/region: Allow setting align attribute on regions without mappingsTyler Hicks
The alignment constraint for namespace creation in a region was increased, from 2M to 16M, for non-PowerPC architectures in v5.7 with commit 2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute"). The thought behind the change was that region alignment should be uniform across all architectures and, since PowerPC had the largest alignment constraint of 16M, all architectures should conform to that alignment. The change regressed namespace creation in pre-defined regions that relied on 2M alignment but a workaround was provided in the form of a sysfs attribute, named 'align', that could be adjusted to a non-default alignment value. However, the sysfs attribute's store function returned an error (-ENXIO) when userspace attempted to change the alignment of a region that had no mappings. This affected 2M aligned regions of volatile memory that were defined in a device tree using "pmem-region" and created by the of_pmem_region_driver, since those regions do not contain mappings (ndr_mappings is 0). Allow userspace to set the align attribute on pre-existing regions that do not have mappings so that namespaces can still be within those regions, despite not being aligned to 16M. Link: https://lore.kernel.org/lkml/CA+CK2bDJ3hrWoE91L2wpAk+Yu0_=GtYw=4gLDDD7mxs321b_aA@mail.gmail.com Fixes: 2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Link: https://lore.kernel.org/r/20220830054505.1159488-1-tyhicks@linux.microsoft.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-09-30drm/msm: Fix build break with recent mm treeRob Clark
9178e3dcb121 ("mm: discard __GFP_ATOMIC") removed __GFP_ATOMIC, replacing it with a check for not __GFP_DIRECT_RECLAIM. Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220929161404.2769414-1-robdclark@gmail.com
2022-09-30Merge tag 'drm-intel-next-fixes-2022-09-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix release build bug in 'remove GuC log size module parameters' (John Harrison) - Remove ipc_enabled from struct drm_i915_private (Jani Nikula) - Do not cleanup obj with NULL bo->resource (Nirmoy Das) - Fix device info for devices without display (Jani Nikula) - Force DPLL calculation for TC ports after readout (Ville Syrjälä) - Use i915_vm_put on ppgtt_create error paths (Chris Wilson) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YzWqtwPNxAe+r9FO@tursulin-desk
2022-09-30Merge tag 'drm-intel-fixes-2022-09-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Restrict forced preemption to the active context (Chris) - Restrict perf_limit_reasons to the supported platforms - gen11+ (Ashutosh) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YzXAkH1a32pYJD33@intel.com
2022-09-29input: drop empty comment blocksChristophe JAILLET
Commit 1a59d1b8e05e ("treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156") has left some empty comment blocks. Remove them to save a few lines of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/26a2b905b259bfffaf2de5b26f2007b8606970ed.1664478665.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-09-30Merge tag 'amd-drm-fixes-6.0-2022-09-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-29: amdgpu: - GC 11.x fixes - SMU 13.x fixes - DCN 3.1.4 fixes - DCN 3.2.x fixes - GC 9.x fix - Fence fix - SR-IOV supend/resume fix - PSR regression fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220929144003.8363-1-alexander.deucher@amd.com
2022-09-30Merge tag 'drm-misc-fixes-2022-09-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * bridge/analogix: Revert earlier suspend fix * bridge/lt8912b: Fix corrupt display output Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YzWvHhaqHhYirn4L@linux-uq9g
2022-09-29of: fdt: Remove unused struct fdt_scan_statusYuan Can
After commit bba04d965d06("of/fdt: remove unused of_scan_flat_dt_by_path"), no one use struct fdt_scan_status, so remove it. Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Link: https://lore.kernel.org/r/20220927133739.98493-1-yuancan@huawei.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29drm/panel: simple: Use dev_err_probe() to simplify codeYuan Can
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-3-yuancan@huawei.com
2022-09-29drm/panel: panel-edp: Use dev_err_probe() to simplify codeYuan Can
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-2-yuancan@huawei.com Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-2-yuancan@huawei.com
2022-09-29random: add 8-bit and 16-bit batchesJason A. Donenfeld
There are numerous places in the kernel that would be sped up by having smaller batches. Currently those callsites do `get_random_u32() & 0xff` or similar. Since these are pretty spread out, and will require patches to multiple different trees, let's get ahead of the curve and lay the foundation for `get_random_u8()` and `get_random_u16()`, so that it's then possible to start submitting conversion patches leisurely. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-29random: use init_utsname() instead of utsname()Jason A. Donenfeld
Rather than going through the current-> indirection for utsname, at this point in boot, init_utsname()==utsname(), so just use it directly that way. Additionally, init_utsname() appears to be available nearly always, so move it into random_init_early(). Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-29random: split initialization into early step and later stepJason A. Donenfeld
The full RNG initialization relies on some timestamps, made possible with initialization functions like time_init() and timekeeping_init(). However, these are only available rather late in initialization. Meanwhile, other things, such as memory allocator functions, make use of the RNG much earlier. So split RNG initialization into two phases. We can provide arch randomness very early on, and then later, after timekeeping and such are available, initialize the rest. This ensures that, for example, slabs are properly randomized if RDRAND is available. Without this, CONFIG_SLAB_FREELIST_RANDOM=y loses a degree of its security, because its random seed is potentially deterministic, since it hasn't yet incorporated RDRAND. It also makes it possible to use a better seed in kfence, which currently relies on only the cycle counter. Another positive consequence is that on systems with RDRAND, running with CONFIG_WARN_ALL_UNSEEDED_RANDOM=y results in no warnings at all. One subtle side effect of this change is that on systems with no RDRAND, RDTSC is now only queried by random_init() once, committing the moment of the function call, instead of multiple times as before. This is intentional, as the multiple RDTSCs in a loop before weren't accomplishing very much, with jitter being better provided by try_to_generate_entropy(). Plus, filling blocks with RDTSC is still being done in extract_entropy(), which is necessarily called before random bytes are served anyway. Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-29PCI/PM: Reduce D3hot delay with usleep_range()Sajid Dalvi
PCIe r6.0, sec 5.9, requires a 10ms delay between programming a device to change to or from D3hot and the time the device is next accessed (unless Readiness Notifications are used). The 10ms value (PCI_PM_D3HOT_WAIT) doesn't appear directly here because some chipsets require 120ms for devices *below* them (pci_pm_d3hot_delay) and some devices require more or less than 10ms (dev->d3hot_delay). But msleep(10) typically waits about *20*ms, which is more than we need. Switch to usleep_range() to improve the delay accuracy. Based on a commit from Sajid in the Pixel 6 kernel tree [1]. On a Pixel 6, the 10ms delay for the Exynos PCIe device delayed for an average of 19ms. Switching to usleep_range() decreased the resume time by about 9ms. [1] https://android.googlesource.com/kernel/gs/+/18a8cad68d8e6d50f339a716a18295e6d987cee3 [bhelgaas commit log, add timers-howto.rst link] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/timers/timers-howto.rst?id=v5.19#n73 Link: https://lore.kernel.org/r/20220921212735.2131588-1-willmcvicker@google.com Signed-off-by: Sajid Dalvi <sdalvi@google.com> Signed-off-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
2022-09-29drm/amdgpu: Enable sram on vcn_4_0_2Sonny Jiang
Enable sram on vcn_4_0_2 Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Enable VCN DPG for GC11_0_1Sonny Jiang
Enable VCN DPG on GC11_0_1 Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29mfd: syscon: Remove repetition of the regmap_get_val_endian()Andy Shevchenko
Since the commit 0dbdb76c0ca8 ("regmap: mmio: Parse endianness definitions from DT") regmap MMIO parses DT itsef, no need to repeat this in the caller(s). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220808140811.26734-1-andriy.shevchenko@linux.intel.com
2022-09-29dmaengine: ioat: remove unused declarations in dma.hGaosheng Cui
ioat_ring_alloc_order and ioat_ring_max_alloc_order have been removed since commit cd60cd96137f ("dmaengine: IOATDMA: Removing descriptor ring reshape"), so remove them. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20220911091817.3214271-1-cuigaosheng1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ti: k3-udma: Respond TX done if DMA_PREP_INTERRUPT is not requestedVaishnav Achath
If the DMA consumer driver does not expect the callback for TX done, then we need not perform the channel RT byte counter calculations and estimate the completion but return complete on first attempt itself.This assumes that the consumer who did not request DMA_PREP_INTERRUPT has its own mechanism for understanding TX completion, example: MCSPI EOW interrupt can be used as TX completion signal for a SPI transaction. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220914110049.5842-1-vaishnav.a@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: zynqmp_dma: Add device_synchronize supportSwati Agarwal
dmaengine_synchronize implementation is required to synchronize proper termination of current transfers so that any memory resources are not freed while still in use. Implement this callback in the driver so that framework can use the same (in dmaengine_terminate_sync/ dmaengine_synchronize). Signed-off-by: Swati Agarwal <swati.agarwal@amd.com> Link: https://lore.kernel.org/r/20220915090516.5812-1-swati.agarwal@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: dw-edma: Remove runtime PM supportManivannan Sadhasivam
Currently, the dw-edma driver enables the runtime_pm for parent device (chip->dev) and increments/decrements the refcount during alloc/free chan resources callbacks. This leads to a problem when the eDMA driver has been probed, but the channels were not used. This scenario can happen when the DW PCIe driver probes eDMA driver successfully, but the PCI EPF driver decides not to use eDMA channels and use iATU instead for PCI transfers. In this case, the underlying device would be runtime suspended due to pm_runtime_enable() in dw_edma_probe() and the PCI EPF driver would have no knowledge of it. Ideally, the eDMA driver should not be the one doing the runtime PM of the parent device. The responsibility should instead belong to the client drivers like PCI EPF. So let's remove the runtime PM support from eDMA driver. Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Frank Li <Frank.Li@nxp.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20220910054700.12205-1-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: add configuration for concurrent batch descriptor processingDave Jiang
Add sysfs knob to allow control of the number of batch descriptors that can be concurrently processed by an engine in the group as a fraction of the Maximum Work Descriptors in Progress value specfied in ENGCAP register. This control knob is part of toggle for QoS control. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-6-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: add configuration for concurrent work descriptor processingDave Jiang
Add sysfs knob to allow control of the number of work descriptors that can be concurrently processed by an engine in the group as a fraction of the Maximum Work Descriptors in Progress value specified in ENGCAP register. This control knob is part of toggle for QoS control. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-5-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: add WQ operation cap restriction supportDave Jiang
DSA 2.0 add the capability of configuring DMA ops on a per workqueue basis. This means that certain ops can be disabled by the system administrator for certain wq. By default, all ops are available. A bitmap is used to store the ops due to total op size of 256 bits and it is more convenient to use a range list to specify which bits are enabled. One of the usage to support this is for VM migration between different iteration of devices. The newer ops are disabled in order to allow guest to migrate to a host that only support older ops. Another usage is to restrict the WQ to certain operations for QoS of performance. A sysfs of ops_config attribute is added per wq. It is only usable when the ops_config bit is set under WQ_CAP register. This means that this attribute will return -EOPNOTSUPP on DSA 1.x devices. The expected input is a range list for the bits per operation the WQ supports. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-4-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmanegine: idxd: reformat opcap output to match bitmap_parse() inputDave Jiang
To make input and output consistent and prepping for the per WQ operation configuration support, change the output of opcap display to match the input that is expected by bitmap_parse() helper function. The output will be a bitmap with field width as the number of bits using the %*pb format specifier for printk() family. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-3-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: idxd: convert ats_dis to a wq flagDave Jiang
Make wq attributes access consistent. Convert ats_dis to wq flag WQ_FLAG_ATS_DISABLE. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220917161222.2835172-2-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()Dave Jiang
User reports observing timer event report channel halted but no error observed in CHANERR register. The driver finished self-test and released channel resources. Debug shows that __cleanup() can call mod_timer() after the timer has been deleted and thus resurrect the timer. While harmless, it causes suprious error message to be emitted. Use mod_timer_pending() call to prevent deleted timer from being resurrected. Fixes: 3372de5813e4 ("dmaengine: ioatdma: removal of dma_v3.c and relevant ioat3 references") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/166360672197.3851724.17040290563764838369.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sgChristian Marangi
The calling convention for pre_slave_sg is to return NULL on error and provide an error log to the system. Qcom-adm instead provide error pointer when an error occur. This indirectly cause kernel panic for example for the nandc driver that checks only if the pointer returned by device_prep_slave_sg is not NULL. Returning an error pointer makes nandc think the device_prep_slave_sg function correctly completed and makes the kernel panics later in the code. While nandc is the one that makes the kernel crash, it was pointed out that the real problem is qcom-adm not following calling convention for that function. To fix this, drop returning error pointer and return NULL with an error log. Fixes: 03de6b273805 ("dmaengine: qcom-adm: stop abusing slave_id config") Fixes: 5c9f8c2dbdbe ("dmaengine: qcom: Add ADM driver") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.11+ Link: https://lore.kernel.org/r/20220916041256.7104-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: qcom-adm: fix wrong sizeof config in slave_configChristian Marangi
Fix broken slave_config function that uncorrectly compare the peripheral_size with the size of the config pointer instead of the size of the config struct. This cause the crci value to be ignored and cause a kernel panic on any slave that use adm driver. To fix this, compare to the size of the struct and NOT the size of the pointer. Fixes: 03de6b273805 ("dmaengine: qcom-adm: stop abusing slave_id config") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.17+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220915204844.3838-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220928145609.375860-4-dmitry.baryshkov@linaro.org
2022-09-29clk: qcom: gcc-msm8939: use parent_hws where possibleDmitry Baryshkov
Use parent_hws instead of hanving parent_data with just a single .hw entry to speed up and simplify parent lookups. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220928145609.375860-3-dmitry.baryshkov@linaro.org
2022-09-29clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscsLuca Weiss
The USB controllers on sm6350 do not retain the state when the system goes into low power state and the GDSCs are turned off. This can be observed by the USB connection not coming back alive after putting the device into suspend, essentially breaking USB. Fix this by updating the .pwrsts for the USB GDSCs so they only transition to retention state in low power. Cc: Rajendra Nayak <quic_rjendra@quicinc.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220928132853.179425-1-luca.weiss@fairphone.com
2022-09-29clk: qcom: gcc-sc8280xp: use retention for USB power domainsJohan Hovold
Since commit d399723950c4 ("clk: qcom: gdsc: Fix the handling of PWRSTS_RET support) retention mode can be used on sc8280xp to maintain state during suspend instead of leaving the domain always on. This is needed to eventually allow the parent CX domain to be powered down during suspend. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220929161124.18138-1-johan+linaro@kernel.org
2022-09-29clk: qcom: gdsc: add missing error handlingJohan Hovold
Since commit 7eb231c337e0 ("PM / Domains: Convert pm_genpd_init() to return an error code") pm_genpd_init() can return an error which the caller must handle. The current error handling was also incomplete as the runtime PM and regulator use counts were not balanced in all error paths. Add the missing error handling to the GDSC initialisation to avoid continuing as if nothing happened on errors. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220929155816.17425-1-johan+linaro@kernel.org
2022-09-29drm/hyperv: Add ratelimit on error messageSaurabh Sengar
Due to a full ring buffer, the driver may be unable to send updates to the Hyper-V host. But outputing the error message can make the problem worse because console output is also typically written to the frame buffer. Rate limiting the error message, also output the error code for additional diagnosability. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1662736193-31379-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-29Merge branch irq/misc-6.1 into irq/irqchip-nextMarc Zyngier
* irq/misc-6.1: : . : Misc irqchip updates for 6.1: : : - Allow generic irqchip support without selecting CONFIG_OF_IRQ : : - Fix a couple of bindings for TI interrupts controllers : : - Yet another binding update for a Renesas SoC : : - The obligatory fixes from the spelling police : . dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support irqchip/gic-v3: Fix typo in comment dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells irqchip: Make irqchip_init() usable on pure ACPI systems Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-09-29Merge branch irq/rtl-imap-deprecation into irq/irqchip-nextMarc Zyngier
* irq/rtl-imap-deprecation: : . : Deprecate interrupt-map property for realtek-rtl irqchip : : Patches from Sander Vanheule. : . irqchip/realtek-rtl: use parent interrupts dt-bindings: interrupt-controller: realtek,rtl-intc: require parents irqchip/realtek-rtl: use irq_domain_add_linear() Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-09-29dmaengine: ti: k3-psil: add additional TX threads for j721eMatt Ranostay
Add matching PSI-L threads mapping for transmission DMA channels on the J721E platform. Signed-off-by: Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20220919205931.8397-2-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: ti: k3-psil: add additional TX threads for j7200Matt Ranostay
Add matching PSI-L threads mapping for transmission DMA channels on the J7200 platform. Signed-off-by: Matt Ranostay <mranostay@ti.com> Link: https://lore.kernel.org/r/20220919205931.8397-3-mranostay@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-29dmaengine: apple-admac: Trigger shared resetMartin Povišer
If a reset domain is attached to the device, obtain a shared reference to it and trigger it. Typically on a chip the ADMAC controller will share a reset domain with the MCA peripheral. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220918095845.68860-5-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 06:02:03 +0000