summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-10net: stmmac: remove stmmac_lpi_entry_timer_config()Russell King (Oracle)
Remove stmmac_lpi_entry_timer_config(), setting priv->eee_sw_timer_en at the original call sites, and calling the appropriate stmmac_xxx_hw_lpi_timer() function. No functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZEq-0002LQ-PC@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: split hardware LPI timer controlRussell King (Oracle)
Provide stmmac_disable_hw_lpi_timer() and stmmac_enable_hw_lpi_timer() to control the hardware transmit LPI timer. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZEl-0002LK-LA@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: remove unnecessary EEE handling in stmmac_release()Russell King (Oracle)
phylink_stop() will cause phylink to call the mac_link_down() operation before phylink_stop() returns. As mac_link_down() will call stmmac_eee_init(false), this will set both priv->eee_active and priv->eee_enabled to be false, deleting the eee_ctrl_timer if priv->eee_enabled was previously set. As stmmac_release() calls phylink_stop() before checking whether priv->eee_enabled is true, this is a condition that can never be satisfied, and thus the code within this if() block will never be executed. Remove it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZEg-0002LE-HH@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: move setup of eee_ctrl_timer to stmmac_dvr_probe()Russell King (Oracle)
Move the initialisation of the EEE software timer to the probe function as it is unnecessary to do this each time we enable software LPI. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZEb-0002L8-DJ@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: use boolean for eee_enabled and eee_activeRussell King (Oracle)
priv->eee_enabled and priv->eee_active are both assigned using boolean values. Type them as bool rather than int. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZEW-0002L2-9w@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: move priv->eee_active into stmmac_eee_init()Russell King (Oracle)
Since all call sites of stmmac_eee_init() assign priv->eee_active immediately before, pass this state into stmmac_eee_init() and assign priv->eee_active within this function. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZER-0002Kv-5O@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: move priv->eee_enabled into stmmac_eee_init()Russell King (Oracle)
All call sites for stmmac_eee_init() assign the return code to priv->eee_enabled. Rather than having this coded at each call site, move the assignment inside stmmac_eee_init(). Since stmmac_init_eee() takes priv->lock before checking the state of priv->eee_enabled, move the assignment within the locked region. Also, stmmac_suspend() checks the state of this member under the lock. While two concurrent calls to stmmac_init_eee() aren't possible, there is a possibility that stmmac_suspend() may run concurrently with a change of priv->eee_enabled unless we modify it under the lock. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZEM-0002Kq-2Z@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: remove priv->eee_tw_timerRussell King (Oracle)
priv->eee_tw_timer is only assigned during initialisation to a constant value (STMMAC_DEFAULT_TWT_LS) and then never changed. Remove priv->eee_tw_timer, and instead use STMMAC_DEFAULT_TWT_LS for both uses in stmmac_eee_init(). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZEG-0002Kk-VH@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: convert to use phy_eee_rx_clock_stop()Russell King (Oracle)
Convert stmmac to use phy_eee_rx_clock_stop() to set the PHY receive clock stop in LPI setting, rather than calling the legacy phy_init_eee() function. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZEB-0002Ke-RZ@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: report EEE error statistics if EEE is supportedRussell King (Oracle)
Report the number of EEE error statistics in the xstats even when EEE is not enabled in hardware, but is supported. The PHY maintains this counter even when EEE is not enabled. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZE6-0002KY-Nx@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: remove priv->tx_lpi_enabledRussell King (Oracle)
Through using phylib's EEE state, priv->tx_lpi_enabled has become a write-only variable. Remove it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZE1-0002KS-K1@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: clean up stmmac_disable_eee_mode()Russell King (Oracle)
stmmac_disable_eee_mode() is now only called from stmmac_xmit() when both priv->tx_path_in_lpi_mode and priv->eee_sw_timer_en are true. Therefore: if (!priv->eee_sw_timer_en) in stmmac_disable_eee_mode() will never be true, so this is dead code. Remove it, and rename the function to indicate that it now only deals with software based EEE mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDw-0002KL-Gg@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: remove redundant code from ethtool EEE opsRussell King (Oracle)
Setting edata->tx_lpi_enabled in stmmac_ethtool_op_get_eee() gets overwritten by phylib, so there's no point setting this. In stmmac_ethtool_op_set_eee(), now that stmmac is using the result of phylib's evaluation of EEE, there is no need to handle anything in the ethtool EEE ops other than calling through to the appropriate phylink function, which will pass on to phylib the users request. As stmmac_disable_eee_mode() is now no longer called from outside stmmac_main.c, make it static. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDr-0002KF-Cv@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: make EEE depend on phy->enable_tx_lpiRussell King (Oracle)
Make stmmac EEE depend on phylib's evaluation of user settings and PHY negotiation, as indicated by phy->enable_tx_lpi. This will ensure when phylib has evaluated that the user has disabled LPI, phy_init_eee() will not be called, and priv->eee_active will be false, causing LPI/EEE to be disabled. This is an interim measure - phy_init_eee() will be removed in a later patch. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDm-0002K9-9w@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: use unsigned int for eee_timerRussell King (Oracle)
Since eee_timer is used to initialise priv->tx_lpi_timer, this also should be unsigned to avoid a negative number being interpreted as a very large positive number. Note that this makes the check for negative numbers passed in as a module parameter redundant, and passing a negative number will now produce a large delay rather than the default. Since the default is used without an argument, passing a negative number would be quite obscure. However, if users do, then this will need to be revisited. Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDh-0002K3-6y@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: use correct type for tx_lpi_timerRussell King (Oracle)
The ethtool interface uses u32 for tx_lpi_timer, and so does phylib. Use u32 to store this internally within stmmac rather than "int" which could misinterpret large values. Correct "value" in dwmac4_set_eee_lpi_entry_timer() to use u32 rather than int, which is derived from tx_lpi_timer. Even though this path won't be used with values larger than STMMAC_ET_MAX, this brings consistency of type usage to the stmmac code for this variable. We leave eee_timer unchanged for now, with the assumption that values up to INT_MAX will safely fit in a u32. Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDc-0002Jx-3b@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: stmmac: move tx_lpi_timer tracking to phylibRussell King (Oracle)
When stmmac_ethtool_op_get_eee() is called, stmmac sets the tx_lpi_timer and tx_lpi_enabled members, and then calls into phylink and thus phylib. phylib overwrites these members. phylib will also cause a link down/link up transition when settings that impact the MAC have been changed. Convert stmmac to use the tx_lpi_timer setting in struct phy_device, updating priv->tx_lpi_timer each time when the link comes up, rather than trying to maintain this user setting itself. We initialise the phylib tx_lpi_timer setting by doing a get_ee-modify-set_eee sequence with the last known priv->tx_lpi_timer value. In order for this to work correctly, we also need this member to be initialised earlier. As stmmac_eee_init() is no longer called outside of stmmac_main.c, make it static. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDW-0002Jr-W3@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: phy: add configuration of rx clock stop modeRussell King (Oracle)
Add a function to allow configuration of the PCS's clock stop enable bit, used to configure whether the xMII receive clock can be stopped during LPI mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tVZDR-0002Jl-Ry@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init()Arun Easi
Propagate scsi_add_host() error instead of returning -1. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Signed-off-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091956.17749-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Test for memory allocation failure and return error codeKaran Tilak Kumar
Fix kernel test robot warning. Test for memory allocation failure, and free memory for queues allocated in a multiqueue and non-multiqueue scenario. Return appropriate error code. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202412312347.FE4ZgEoM-lkp@intel.com/ Reported-by: Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202412312347.FE4ZgEoM-lkp@intel.com/ Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091924.17729-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Return appropriate error code from failure of scsi drv initKaran Tilak Kumar
Return appropriate error code from fnic_probe caused by failure of fnic_scsi_drv_init. Fix bug report. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091842.17711-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Return appropriate error code for mem alloc failureKaran Tilak Kumar
Return appropriate error code from fnic_probe when memory create slab pool fails. Fix bug report. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091746.17671-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macroArun Easi
IS_FNIC_FCP_INITIATOR macro is not applicable at this time. Delete the macro. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Signed-off-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250110091655.17643-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Fix use of uninitialized value in debug messageDheeraj Reddy Jonnalagadda
The oxid variable in fdls_process_abts_req() was only being initialized inside the if (tport) block, but was being used in a debug print statement after that block. If tport was NULL, oxid would remain uninitialized. Move the oxid initialization to happen at declaration using FNIC_STD_GET_OX_ID(fchdr). Fixes: f828af44b8dd ("scsi: fnic: Add support for unsolicited requests and responses") Closes: https://scan7.scan.coverity.com/#/project-view/52337/11354?selectedIssue=1602772 Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com> Link: https://lore.kernel.org/r/20250108050916.52721-1-dheeraj.linuxdev@gmail.com Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Delete incorrect debugfs error handlingDan Carpenter
Debugfs functions are not supposed to require error checking and, in fact, adding checks would normally lead to the driver refusing to load when CONFIG_DEBUGFS is disabled. What saves us here is that this code checks for NULL instead of error pointers so the error checking is all dead code. Delete it. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/a5c237cd-449b-4f9d-bcff-6285fb7c28d1@stanley.mountain Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Remove unnecessary else to fix warning in FDLS FIPKaran Tilak Kumar
Implement review comments from Martin: Remove unnecessary else from fip.c to fix a warning. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250106224451.3597-3-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Remove extern definition from .c filesKaran Tilak Kumar
Implement review comments from Martin: Remove extern definition of fnic_fip_queue from .c files Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250106224451.3597-2-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: fnic: Remove unnecessary else and unnecessary break in FDLSKaran Tilak Kumar
Incorporate review comments from Martin: Remove unnecessary else and unnecessary break to fix warnings in the FDLS code. Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com> Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com> Reviewed-by: Arun Easi <aeasi@cisco.com> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com> Link: https://lore.kernel.org/r/20250106224451.3597-1-kartilak@cisco.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: mpi3mr: Fix possible crash when setting up bsg failsGuixin Liu
If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value. Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)" will not be satisfied, preventing execution from entering bsg_remove_queue(), which could lead to the following crash: BUG: kernel NULL pointer dereference, address: 000000000000041c Call Trace: <TASK> mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr] mpi3mr_remove+0x6f/0x340 [mpi3mr] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19d/0x220 unbind_store+0xa4/0xb0 kernfs_fop_write_iter+0x11f/0x200 vfs_write+0x1fc/0x3e0 ksys_write+0x67/0xe0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Fixes: 4268fa751365 ("scsi: mpi3mr: Add bsg device support") Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20250107022032.24006-1-kanie@linux.alibaba.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: ufs: bsg: Set bsg_queue to NULL after removalGuixin Liu
Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20241218014214.64533-3-kanie@linux.alibaba.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: ufs: bsg: Delete bsg_dev when setting up bsg failsGuixin Liu
We should remove the bsg device when bsg_setup_queue() fails to release the resources. Fixes: df032bf27a41 ("scsi: ufs: Add a bsg endpoint that supports UPIUs") Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20241218014214.64533-2-kanie@linux.alibaba.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: st: Don't set pos_unknown just after device recognitionKai Mäkisara
Commit 9604eea5bd3a ("scsi: st: Add third party poweron reset handling") in v6.6 added new code to handle the Power On/Reset Unit Attention (POR UA) sense data. This was in addition to the existing method. When this Unit Attention is received, the driver blocks attempts to read, write and some other operations because the reset may have rewinded the tape. Because of the added code, also the initial POR UA resulted in blocking operations, including those that are used to set the driver options after the device is recognized. Also, reading and writing are refused, whereas they succeeded before this commit. Add code to not set pos_unknown to block operations if the POR UA is received from the first test_ready() call after the st device has been created. This restores the behavior before v6.6. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20241216113755.30415-1-Kai.Makisara@kolumbus.fi Fixes: 9604eea5bd3a ("scsi: st: Add third party poweron reset handling") CC: stable@vger.kernel.org Closes: https://lore.kernel.org/linux-scsi/2201CF73-4795-4D3B-9A79-6EE5215CF58D@kolumbus.fi/ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: aic7xxx: Fix build 'aicasm' warningwangdicheng
When building with CONFIG_AIC7XXX_BUILD_FIRMWARE=y or CONFIG_AIC79XX_BUILD_FIRMWARE=y, the warning messages are as follows: aicasm_gram.tab.c:1722:16: warning: implicit declaration of function ‘yylex’ [-Wimplicit-function-declaration] aicasm_macro_gram.c:68:25: warning: implicit declaration of function ‘mmlex’ [-Wimplicit-function-declaration] aicasm_scan.l:417:6: warning: implicit declaration of function ‘mm_switch_to_buffer’ aicasm_scan.l:418:6: warning: implicit declaration of function ‘mmparse’ aicasm_scan.l:421:6: warning: implicit declaration of function ‘mm_delete_buffer’ The solution is to add the corresponding function declaration to the corresponding file. Signed-off-by: wangdicheng <wangdicheng@kylinos.cn> Signed-off-by: huanglei <huanglei@kylinos.cn> Link: https://lore.kernel.org/r/20241206071926.63832-1-wangdich9700@163.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10Merge tag 'thermal-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "Fix an OF node leak in the code parsing thermal zone DT properties (Joe Hattori)" * tag 'thermal-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: of: fix OF node leak in of_thermal_zone_find()
2025-01-10wifi: ath9k: cleanup ath9k_hw_get_nf_hist_mid()Dmitry Antipov
In 'ath9k_hw_get_nf_hist_mid()', prefer 'memcpy()' and 'sort()' over an ad-hoc things. Briefly tested as a separate module. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250109080703.106692-1-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10Merge tag 'acpi-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Add two more ACPI IRQ override quirks and update the code using them to avoid unnecessary overhead (Hans de Goede)" * tag 'acpi-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: resource: acpi_dev_irq_override(): Check DMI match last ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[] ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]
2025-01-10scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"Avri Altman
This reverts commit 6e1d850acff9477ae4c18a73c19ef52841ac2010. Although added a while ago, to date no one make use of ext_iid, specifically incorporates it in the upiu header. Therefore, remove it as it is currently unused and not serving any purpose. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20250103080204.63951-1-avri.altman@wdc.com Cc: Can Guo <quic_cang@quicinc.com> Cc: Asutosh Das <quic_asutoshd@quicinc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: storvsc: Ratelimit warning logs to prevent VM denial of serviceEaswar Hariharan
If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM. Closes: https://github.com/microsoft/WSL/issues/9173 Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Link: https://lore.kernel.org/r/20250107-eahariha-ratelimit-storvsc-v1-1-7fc193d1f2b0@linux.microsoft.com Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_debug: Constify sdebug_driver_templateJohn Garry
It's better to have sdebug_driver_template as const, so update the probe path to set the shost members directly after allocation and make that change. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250107153325.1689432-1-john.g.garry@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-11Merge tag 'cgroup-dmem-drm-v2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next DMEM cgroup pull request This introduces a new cgroup controller to limit the device memory. Notable users would be DRM, dma-buf heaps, or v4l2. This pull request is based on the series developped by Maarten Lankhorst, Friedrich Vock, and I: https://lore.kernel.org/all/20241204134410.1161769-1-dev@lankhorst.se/ Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250110-cryptic-warm-mandrill-b71f5d@houat
2025-01-10Merge tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular weekly fixes, this has the usual amdgpu/xe/i915 bits. There is a bigger bunch of mediatek patches that I considered not including at this stage, but all the changes (except for one were obvious small fixes, and the rotation one is a few lines, and I suppose will help someone have their screen up the right way), I decided to include it since I expect it got slowed down by holidays etc, and it's not that mainstream a hw platform. i915: - Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" amdgpu: - Display interrupt fixes - Fix display max surface mismatches - Fix divide error in DM plane scale calcs - Display divide by 0 checks in dml helpers - SMU 13 AD/DC interrrupt handling fix - Fix locking around buddy trim handling amdkfd: - Fix page fault with shader debugger enabled - Fix eviction fence wq handling xe: - Avoid a NULL ptr deref when wedging - Fix power gate sequence on DG1 mediatek: - Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing" - Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err - Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb() - Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported - Add support for 180-degree rotation in the display driver - Stop selecting foreign drivers - Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" - Fix YCbCr422 color format issue for DP - Fix mode valid issue for dp - dp: Reference common DAI properties - dsi: Add registers to pdata to fix MT8186/MT8188 - Remove unneeded semicolon - Add return value check when reading DPCD - Initialize pointer in mtk_drm_of_ddp_path_build_one()" * tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits) drm/xe/dg1: Fix power gate sequence. drm/xe: Fix tlb invalidation when wedging Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" drm/amdgpu: Add a lock when accessing the buddy trim function drm/amd/pm: fix BUG: scheduling while atomic drm/amdkfd: wq_release signals dma_fence only when available drm/amd/display: Add check for granularity in dml ceil/floor helpers drm/amdkfd: fixed page fault when enable MES shader debugger drm/amd/display: fix divide error in DM plane scale calcs drm/amd/display: increase MAX_SURFACES to the value supported by hw drm/amd/display: fix page fault due to max surface definition mismatch drm/amd/display: Remove unnecessary amdgpu_irq_get/put drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one() drm/mediatek: Add return value check when reading DPCD drm/mediatek: Remove unneeded semicolon drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188 dt-bindings: display: mediatek: dp: Reference common DAI properties drm/mediatek: Fix mode valid issue for dp drm/mediatek: Fix YCbCr422 color format issue for DP Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" ...
2025-01-10Merge branch '6.13/scsi-fixes' into 6.14/scsi-stagingMartin K. Petersen
Pull in fixes branch to resolve merge conflict in ufs-qcom.c. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: transport: sas: spi: Fix kernel-doc for exported functionsRandy Dunlap
Fix kernel-doc for sas_port_alloc(), sas_port_alloc_num(), and spi_dv_device(). This allows them to be part of the SCSI driver-api docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-6-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_scan: Add kernel-doc for exported functionRandy Dunlap
Add kernel-doc for scsi_add_device() since it is exported. This allows it to be part of the SCSI driver-api docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-5-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_lib: Add kernel-doc for exported functionsRandy Dunlap
Add kernel-doc for scsi_failures_reset_retries() and scsi_alloc_request() since these are exported. This allows them to be part of the SCSI driver-api docbook. Fix kernel-doc comments for scsi_vpd_tpg_id() [add kernel-doc for one parameter and fix a typo]. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-4-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_ioctl: Add kernel-doc for exported functionsRandy Dunlap
Add kernel-doc for scsi_set_medium_removal(), scsi_cmd_allowed(), and scsi_ioctl_block_when_processing_errors() since these are exported. This allows them to be part of the SCSI driver-api docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-3-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_error: Add kernel-doc for exported functionsRandy Dunlap
Convert scsi_report_bus_reset() and scsi_report_device_reset() to kernel-doc since they are exported. This allows them to be part of the driver-api/scsi.rst docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-2-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10wifi: ath12k: Support pdev Puncture StatsRajat Soni
Add support to request pdev puncture stats from firmware through HTT stats type 46. These stats give the count of number of subbands used in different wifi standards. Sample output: ------------- echo 46 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ofdm_su_last_used_pattern_mask = 0x00000001 tx_ofdm_su_num_subbands_used_cnt_01 = 217 tx_ofdm_su_num_subbands_used_cnt_02 = 0 tx_ofdm_su_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_ax_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_ax_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 tx_be_dl_mu_ofdma_last_used_pattern_mask = 0x00000000 tx_be_dl_mu_ofdma_num_subbands_used_cnt_01 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_02 = 0 tx_be_dl_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_ax_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_ax_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... HTT_PDEV_PUNCTURE_STATS_TLV: mac_id = 0 rx_be_ul_mu_ofdma_last_used_pattern_mask = 0x00000000 rx_be_ul_mu_ofdma_num_subbands_used_cnt_01 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_02 = 0 rx_be_ul_mu_ofdma_num_subbands_used_cnt_03 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218035711.2573584-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support AST Entry StatsRoopni Devanathan
Add support to request Address Search Table(AST) entries stats from firmware through HTT stats type 41. These stats give AST entries related information such as software peer id, MAC address, pdev id, vdev, id, next hop, etc. Sample output: ------------- echo 41 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_AST_ENTRY_TLV: ast_index = 10 mac_addr = 00:00:00:01:00:00 sw_peer_id = 0 pdev_id = 3 vdev_id = 255 next_hop = 0 mcast = 0 monitor_direct = 0 mesh_sta = 0 mec = 0 intra_bss = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241218035711.2573584-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-10wifi: ath12k: Support Transmit Buffer OFDMA StatsPradeep Kumar Chitrapu
Add support to request OFDMA stats of transmit buffers from firmware through HTT stats type 32. These stats give information about NDPA, NDP, BRP and steering mechanisms. Note: WCN7850 firmware version - WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not support HTT stats type 32. Sample output: ------------- echo 32 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TXBF_OFDMA_AX_NDPA_STATS_TLV: ax_ofdma_ndpa_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndpa_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_NDP_STATS_TLV: ax_ofdma_ndp_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_ndp_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_BRP_STATS_TLV: ax_ofdma_brpoll_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_brpoll_tied = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_STATS_TLV: ax_ofdma_num_ppdu_steer = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ax_ofdma_num_usrs_prefetch = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0 ..... HTT_TXBF_OFDMA_AX_STEER_MPDU_STATS_TLV: rbo_steer_mpdus_tried = 0 rbo_steer_mpdus_failed = 0 sifs_steer_mpdus_tried = 0 sifs_steer_mpdus_failed = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <jjohnson@kernel.org> Link: https://patch.msgid.link/20241128110949.3672364-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-09-16 22:33:17 +0000