summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-12-20tty: serial: qcom_geni_serial: Fix UART hangRyan Case
If a serial console write occured while a UART transmit command was waiting for a done signal then no further data would be sent until something new kicked the system into gear. If there is already data waiting in the circular buffer we must re-enable the tx watermark so we receive the expected interrupts. Signed-off-by: Ryan Case <ryandcase@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-20tty: serial: qcom_geni_serial: Fix wrap around of TX bufferMatthias Kaehlcke
Before commit a1fee899e5bed ("tty: serial: qcom_geni_serial: Fix softlock") the size of TX transfers was limited to the TX FIFO size, and wrap arounds of the UART circular buffer were split into two transfers. With the commit wrap around are allowed within a transfer. The TX FIFO of the geni serial port uses a word size of 4 bytes. In case of a circular buffer wrap within a transfer the driver currently may write an incomplete word to the FIFO, with some bytes containing data from the circular buffer and others being zero. Since the transfer isn't completed yet the zero bytes are sent as if they were actual data. Handle wrap arounds of the TX buffer properly and ensure that words written to the TX FIFO always contain valid data (unless the transfer is completed). Fixes: a1fee899e5bed ("tty: serial: qcom_geni_serial: Fix softlock") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Tested-by: Ryan Case <ryandcase@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-20Merge tag 'mmc-v4.20-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Restore code to allow BKOPS and CACHE ctrl even if no HPI support - Reset HPI enabled state during re-init - Use a default minimum timeout when enabling CACHE ctrl MMC host: - omap_hsmmc: Fix DMA API warning - sdhci-tegra: Fix dt parsing of SDMMC pads autocal values - Correct register accesses when enabling v4 mode" * tag 'mmc-v4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support mmc: core: Reset HPI enabled state during re-init and in case of errors mmc: omap_hsmmc: fix DMA API warning mmc: tegra: Fix for SDMMC pads autocal parsing from dt mmc: sdhci: Fix sdhci_do_enable_v4_mode
2018-12-20Merge tag 'zynq-soc-for-v5.0' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
next/drivers ARM: Xilinx Zynq SoC patches for v5.0 - Adding pl353 smc driver * tag 'zynq-soc-for-v5.0' of https://github.com/Xilinx/linux-xlnx: memory: pl353: Add driver for arm pl353 static memory controller dt-bindings: memory: Add pl353 smc controller devicetree binding information Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-20spi: sh-msiof: Reduce the number of times write to and perform the ↵Hoan Nguyen An
transmission from FIFO The current state of the spi-sh-msiof, in master transfer mode: if t-> bits_per_word <= 8, if the data length is divisible by 4 ((len & 3) = 0), the length of each word will be 32 bits In case of data length can not be divisible by 4 ((len & 3) != 0), always set each word to be 8 bits, this will increase the number of times that write to FIFO, increasing the number of times it should be transmitted. Assume that the number of bytes of data length more than 64 bytes, each transmission will write 64 times into the TFDR then transmit, a maximum one-time transmission will transmit 64 bytes if each word is 8 bits long. Switch to setting if t->bits_per_word <= 8, the word length will be 32 bits although the data length is not divisible by 4, then if leftover, will transmit the balance and the length of each words is 1 byte. The maximum each can transmit up to 64 x 4 (Data Size = 32 bits (4 bytes)) = 256 bytes. TMDR2 : Bits 28 to 24 BITLEN1[4:0] Data Size (8 to 32 bits) Bits 23 to 16 WDLEN1[7:0] Word Count (1 to 64 words) Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-20regulator: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-20regulator: mcp16502: Fix missing n_voltages settingAxel Lin
The n_voltages setting is not set, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-20regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around ↵Axel Lin
mcp16502_suspend/resume_noirq mcp16502_suspend/resume_noirq is only used by SET_NOIRQ_SYSTEM_SLEEP_PM_OPS when CONFIG_PM_SLEEP is defined. So use #ifdef CONFIG_PM_SLEEP instead CONFIG_SUSPEND guard. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-20net/mlx5: Fix LAG requirement when CONFIG_MLX5_ESWITCH is offAviv Heller
If CONFIG_MLX5_ESWITCH is not defined, test for SR-IOV being disabled, instead of calling e-switch LAG prereq routine. Since LAG with SRIOV is allowed only when switchdev mode is on. Fixes: eff849b2c669 ("net/mlx5: Allow/disallow LAG according to pre-req only") Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5: Fix query_nic_sys_image_guid() error during initAviv Heller
vport system image guid should be queried using vport nic API for Ethernet ports, and vport hca API for Infiniband ports. Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Support tunnel encap over tagged EthernetEli Britstein
Generate encap header depending on the routed device to support native/tagged Ethernet header. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Support VLAN encap ETH header generationEli Britstein
Support generation of native or tagged Ethernet header for encap header, depending on provided net device. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Re-order route and encap header memory allocationEli Britstein
Change the order to first route IPv4/6 and return if error. Only after successful route continue to allocate an encap header, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Tunnel encap ETH header helper functionEli Britstein
In tunnel encap we prepare the encap header for IPv4/6 cases, in two separate functions. For ETH header generation the code is almost duplicated. Move the ETH header generation code from IPv4/6 functions to a helper function, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Fail attempt to offload e-switch TC encap flows with vlan on underlayEli Britstein
Currently we don't support nor fail attempts to offload encap flows routed to vlan device on the underlay network. We wrongly consider a vlan underlay device to be on the same e-switch b/c the switchdev ID is retrieved recursively. Add explicit check for that and fail such attempts. Also align to a more strict check for the ingress and the underlay devices to practically be on the same eswitch. Fixes: ce99f6b97fcd ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels') Fixes: 3e621b19b0bb ('net/mlx5e: Support TC encapsulation offloads with upper devices') Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Tunnel routing output devs helper functionEli Britstein
For tunnel we determine the output devs for IPv4/6 cases, in two separate functions, with a duplicated code. Move that code from IPv4/6 functions to a helper function, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Fail attempt to offload e-switch TC flows with egress upper devicesEli Britstein
We use the switchdev parent HW id helper to identify if the mirred device shares the same ASIC/port with the ingress device. This can get us wrong in the presence of upper devices such as vlan or bridge set over the HW devices (VF or uplink representors), b/c the switchdev ID is retrieved recursively. To fail offload attempts in such cases, we condition the check on the egress device to have not only the same switchdev ID but also the relevant mlx5 netdev ops. Fixes: 03a9d11e6eeb ('net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads') Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Allow vlans on e-switch uplink repsOr Gerlitz
There are cases (e.g tunneling with vlan on underlay and potentially more) where this makes sense, so allow that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20net/mlx5e: Increase VF representors' SQ size to 128Gavi Teitz
The default size for the VF representors' SQ was too small to handle high packet rates. Doubling the size from 64 to 128 drastically improves the packet rate under stress (by about 50%), whereas increasing the size beyond 128 has not shown to make any further difference. The impact of the SQ size was measured with UDP traffic, in the following topology: TG <-> PF <-> TC forwarding <-> VF representor <-> VF in VM over a single core processing bi-directional traffic, with the following results: SQ size of 64: SQ size of 128: Packet rate for 64B UDP packets: 860 [Kpps] 1280 [Kpps] Packet rate for 114B VxLan encapsulated UDP packets: 320 [Kpps] 500 [Kpps] Signed-off-by: Gavi Teitz <gavi@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20mlx5: extend PTP gettime function to read system clockMiroslav Lichvar
Read the system time right before and immediately after reading the low register of the internal timer. This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20mlx5: update timecounter at least twice per counter overflowMiroslav Lichvar
The timecounter needs to be updated at least once in half of the cyclecounter interval to prevent timecounter_cyc2time() interpreting a new timestamp as an old value and causing a backward jump. This would be an issue if the timecounter multiplier was so small that the update interval would not be limited by the 64-bit overflow in multiplication. Shorten the calculated interval to make sure the timecounter is updated in time even when the system clock is slowed down by up to 10%, the multiplier is increased by up to 10%, and the scheduled overflow check is late by 15%. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ariel Levkovich <lariel@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-20vfio/spapr_tce: Get rid of possible infinite loopAlexey Kardashevskiy
As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered memory. If there is a bug in memory release, the loop in tce_iommu_release() becomes infinite; this actually happened to me. This makes the loop finite and prints a warning on every failure to make the code more bug prone. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20media: cx23885: only reset DMA on problematic CPUsBrad Love
It is reported that commit 95f408bbc4e4 ("media: cx23885: Ryzen DMA related RiSC engine stall fixes") caused regresssions with other CPUs. Ensure that the quirk will be applied only for the CPUs that are known to cause problems. A module option is added for explicit control of the behaviour. Fixes: 95f408bbc4e4 ("media: cx23885: Ryzen DMA related RiSC engine stall fixes") Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-20rtc: add i.MX system controller RTC supportAnson Huang
i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller inside, the system controller is in charge of controlling power, clock and secure rtc etc.. This patch adds i.MX system controller RTC driver support, Linux kernel has to communicate with system controller via MU (message unit) IPC to set/get RTC time and other alarm functions, since the RTC set time needs to be done in secure EL3 mode (required by system controller firmware) and alarm functions needs to be done with general MU IRQ handle, these depend on other components which are NOT ready, so this patch ONLY enables the RTC time read. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-20media: ddbridge: Move asm includes after linux onesNathan Chancellor
Without this, cpumask_t and bool are not defined: In file included from drivers/media/pci/ddbridge/ddbridge-ci.c:19: In file included from drivers/media/pci/ddbridge/ddbridge.h:22: ./arch/arm/include/asm/irq.h:35:50: error: unknown type name 'cpumask_t' extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask, ^ ./arch/arm/include/asm/irq.h:36:9: error: unknown type name 'bool' bool exclude_self); ^ Doing a survey of the kernel tree, this appears to be expected because '#include <asm/irq.h>' is always after the linux includes. This also fixes warnings of this variety (with Clang): In file included from drivers/media/pci/ddbridge/ddbridge-ci.c:19: In file included from drivers/media/pci/ddbridge/ddbridge.h:56: In file included from ./include/media/dvb_net.h:22: In file included from ./include/linux/netdevice.h:50: In file included from ./include/uapi/linux/neighbour.h:6: In file included from ./include/linux/netlink.h:9: In file included from ./include/net/scm.h:11: In file included from ./include/linux/sched/signal.h:6: ./include/linux/signal.h:87:11: warning: array index 3 is past the end of the array (which contains 2 elements) [-Warray-bounds] return (set->sig[3] | set->sig[2] | ^ ~ ./arch/arm/include/asm/signal.h:17:2: note: array 'sig' declared here unsigned long sig[_NSIG_WORDS]; ^ Fixes: b6973637c4cc ("media: ddbridge: remove another duplicate of io.h and sort includes") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-20ocxl/afu_irq: Don't include <asm/pnv-ocxl.h>Greg Kurz
The AFU irq code doesn't need to reach out to the platform. Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20ocxl: Clarify error path in setup_xsl_irq()Greg Kurz
Implementing rollback with goto and labels is a common practice that leads to prettier and more maintainable code. FWIW, this design pattern is already being used in alloc_link() a few lines below in this file. Do the same in setup_xsl_irq(). Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20cxl: drop the dma_set_mask callback from vphbChristoph Hellwig
The CXL code never even looks at the dma mask, so there is no good reason for this sanity check. Remove it because it gets in the way of the dma ops refactoring. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20crypto4xx_core: don't abuse __dma_sync_pageChristoph Hellwig
This function is internal to the DMA API implementation. Instead use the DMA API to properly unmap. Note that the DMA API usage in this driver is a disaster and urgently needs some work - it is missing all the unmaps, seems to do a secondary map where it looks like it should to a unmap in one place to work around cache coherency and the directions passed in seem to be partially wrong. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20ocxl: Fix endiannes bug in ocxl_link_update_pe()Greg Kurz
All fields in the PE are big-endian. Use cpu_to_be32() like everywhere else something is written to the PE. Otherwise a wrong TID will be used by the NPU. If this TID happens to point to an existing thread sharing the same mm, it could be woken up by error. This is highly improbable though. The likely outcome of this is the NPU not finding the target thread and forcing the AFU into sending an interrupt, which userspace is supposed to handle anyway. Fixes: e948e06fc63a ("ocxl: Expose the thread_id needed for wait on POWER9") Cc: stable@vger.kernel.org # v4.18 Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20ACPI: Make PCI slot detection driver depend on PCISinan Kaya
Since this is ACPI PCI slot detection driver for PCI, it doesn't make sense to compile this without PCI support in place. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not setSinan Kaya
Remove PCI dependent code out of iort.c when CONFIG_PCI is not defined. A quick search reveals the following functions: 1. pci_request_acs() 2. pci_domain_nr() 3. pci_is_root_bus() 4. to_pci_dev() Both pci_domain_nr() and pci_is_root_bus() are defined in linux/pci.h. pci_domain_nr() is a stub function when CONFIG_PCI is not set and pci_is_root_bus() just returns a reference to a structure member which is still valid without CONFIG_PCI set. to_pci_dev() is a macro that expands to container_of. pci_request_acs() is the only code that gets pulled in from drivers/pci/*.c Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20PCI/ACPI: Allow ACPI to be built without CONFIG_PCI setSinan Kaya
We are compiling PCI code today for systems with ACPI and no PCI device present. Remove the useless code and reduce the tight dependency. Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unsetSinan Kaya
Allow ACPI to be built without PCI support in place. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20ACPI: Allow CONFIG_PCI to be unset for rebootSinan Kaya
Make PCI reboot conditional on CONFIG_PCI set on the kernel configuration. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20ACPI: Move PCI reset to a separate functionSinan Kaya
Getting ready to factor out PCI specific code when CONFIG_PCI is unset. Create a acpi_pci_reset() that kick starts PCI specific reset. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20Merge branches 'iommu/fixes', 'arm/renesas', 'arm/mediatek', 'arm/tegra', ↵Joerg Roedel
'arm/omap', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next
2018-12-20iommu: Check for iommu_ops == NULL in iommu_probe_device()Joerg Roedel
This check needs to be there and got lost at some point during development. Add it again. Fixes: 641fb0efbff0 ('iommu/of: Don't call iommu_ops->add_device directly') Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-19net: hns3: remove redundant variable initializationPeng Li
This patch removes the redundant variable initialization, as driver will devm_kzalloc to set value to hdev soon. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: fix the descriptor index when get rss typePeng Li
Driver gets rss information from the last descriptor of the packet. When driver handle the rss type, ring->next_to_clean indicates the first descriptor of next packet. This patch fix the descriptor index with "ring->next_to_clean - 1". Fixes: 232fc64b6e62 ("net: hns3: Add HW RSS hash information to RX skb") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: don't restore rules when flow director is disabledJian Shen
When user disables flow director, all the rules will be disabled. But when reset happens, it will restore all the rules again. It's not reasonable. This patch fixes it by add flow director status check before restore fules. Fixes: 6871af29b3ab ("net: hns3: Add reset handle for flow director") Fixes: c17852a8932f ("net: hns3: Add support for enable/disable flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: fix vf id check issue when add flow director ruleJian Shen
When add flow director fule for vf, the vf id is used as array subscript before valid checking, which may cause memory overflow. Fixes: dd74f815dd41 ("net: hns3: Add support for rule add/delete for flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: reset tqp while doing DOWN operationHuazhong Tan
While doing DOWN operation, the driver will reclaim the memory which has already used for TX. If the hardware is processing this memory, it will cause a RCB error to the hardware. According the hardware's description, the driver should reset the tqp before reclaim the memory during DOWN. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: add max vector number check for pfJian Shen
Each pf supports max 64 vectors and 128 tqps. For 2p/4p core scenario, there may be more than 64 cpus online. So the result of min_t(u16, num_Online_cpus(), tqp_num) may be more than 64. This patch adds check for the vector number. Fixes: dd38c72604dc ("net: hns3: fix for coalesce configuration lost during reset") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: fix a bug caused by udelayPeng Li
udelay() in driver may always occupancy processor. If there is only one cpu in system, the VF driver may initialize fail when insmod PF and VF driver in the same system. This patch use msleep() to free cpu when VF wait PF message. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: change default tc state to closeJian Shen
In original codes, default tc value is set to the max tc. It's more reasonable to close tc by changing default tc value to 1. Users can enable it with lldp tool when they want to use tc. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: refine the handle for hns3_nic_net_open/stop()Jian Shen
When triggering nic down, there is a time window between bringing down the protocol stack and stopping the work task. If the net is up in the time window, it may bring up the protocol stack again. This patch fixes it by stop the work task at the beginning of hns3_nic_net_stop(). To keep symmetrical, start the work task at the end of hns3_nic_net_open(). Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20wil6210: remove set but not used variable 'wdev'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/ath/wil6210/main.c: In function '_wil6210_disconnect': drivers/net/wireless/ath/wil6210/main.c:407:23: warning: variable 'wdev' set but not used [-Wunused-but-set-variable] It never used since commit ("e1b43407c034 wil6210: refactor disconnect flow") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20wil6210: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Off by one in netlink parsing of mac802154_hwsim, from Alexander Aring. 2) nf_tables RCU usage fix from Taehee Yoo. 3) Flow dissector needs nhoff and thoff clamping, from Stanislav Fomichev. 4) Missing sin6_flowinfo initialization in SCTP, from Xin Long. 5) Spectrev1 in ipmr and ip6mr, from Gustavo A. R. Silva. 6) Fix r8169 crash when DEBUG_SHIRQ is enabled, from Heiner Kallweit. 7) Fix SKB leak in rtlwifi, from Larry Finger. 8) Fix state pruning in bpf verifier, from Jakub Kicinski. 9) Don't handle completely duplicate fragments as overlapping, from Michal Kubecek. 10) Fix memory corruption with macb and 64-bit DMA, from Anssi Hannula. 11) Fix TCP fallback socket release in smc, from Myungho Jung. 12) gro_cells_destroy needs to napi_disable, from Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (130 commits) rds: Fix warning. neighbor: NTF_PROXY is a valid ndm_flag for a dump request net: mvpp2: fix the phylink mode validation net/sched: cls_flower: Remove old entries from rhashtable net/tls: allocate tls context using GFP_ATOMIC iptunnel: make TUNNEL_FLAGS available in uapi gro_cell: add napi_disable in gro_cells_destroy lan743x: Remove MAC Reset from initialization net/mlx5e: Remove the false indication of software timestamping support net/mlx5: Typo fix in del_sw_hw_rule net/mlx5e: RX, Fix wrong early return in receive queue poll ipv6: explicitly initialize udp6_addr in udp_sock_create6() bnxt_en: Fix ethtool self-test loopback. net/rds: remove user triggered WARN_ON in rds_sendmsg net/rds: fix warn in rds_message_alloc_sgs ath10k: skip sending quiet mode cmd for WCN3990 mac80211: free skb fraglist before freeing the skb nl80211: fix memory leak if validate_pae_over_nl80211() fails net/smc: fix TCP fallback socket release vxge: ensure data0 is initialized in when fetching firmware version information ...
generated by cgit (git 2.34.1) at 2025-09-14 21:47:24 +0000