summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-04-17Merge branch 'irq/gic-v4.1-fixes-5.7' into irq/irqchip-5.7Marc Zyngier
2020-04-17irqchip/irq-bcm7038-l1: Make bcm7038_l1_of_init() staticJason Yan
Fix the following sparse warning: drivers/irqchip/irq-bcm7038-l1.c:419:12: warning: symbol 'bcm7038_l1_of_init' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200417074036.46594-1-yanaijie@huawei.com
2020-04-17irqchip/irq-mvebu-icu: Make legacy_bindings staticJason Yan
Fix the following sparse warning: drivers/irqchip/irq-mvebu-icu.c:69:1: warning: symbol 'legacy_bindings' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200417074046.46771-1-yanaijie@huawei.com
2020-04-17irqchip/meson-gpio: Fix HARDIRQ-safe -> HARDIRQ-unsafe lock orderMarc Zyngier
Running a lockedp-enabled kernel on a vim3l board (Amlogic SM1) leads to the following splat: [ 13.557138] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 13.587485] ip/456 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 13.625922] ffff000059908cf0 (&irq_desc_lock_class){-.-.}-{2:2}, at: __setup_irq+0xf8/0x8d8 [ 13.632273] which would create a new lock dependency: [ 13.637272] (&irq_desc_lock_class){-.-.}-{2:2} -> (&ctl->lock){+.+.}-{2:2} [ 13.644209] [ 13.644209] but this new dependency connects a HARDIRQ-irq-safe lock: [ 13.654122] (&irq_desc_lock_class){-.-.}-{2:2} [ 13.654125] [ 13.654125] ... which became HARDIRQ-irq-safe at: [ 13.664759] lock_acquire+0xec/0x368 [ 13.666926] _raw_spin_lock+0x60/0x88 [ 13.669979] handle_fasteoi_irq+0x30/0x178 [ 13.674082] generic_handle_irq+0x38/0x50 [ 13.678098] __handle_domain_irq+0x6c/0xc8 [ 13.682209] gic_handle_irq+0x5c/0xb0 [ 13.685872] el1_irq+0xd0/0x180 [ 13.689010] arch_cpu_idle+0x40/0x220 [ 13.692732] default_idle_call+0x54/0x60 [ 13.696677] do_idle+0x23c/0x2e8 [ 13.699903] cpu_startup_entry+0x30/0x50 [ 13.703852] rest_init+0x1e0/0x2b4 [ 13.707301] arch_call_rest_init+0x18/0x24 [ 13.711449] start_kernel+0x4ec/0x51c [ 13.715167] [ 13.715167] to a HARDIRQ-irq-unsafe lock: [ 13.722426] (&ctl->lock){+.+.}-{2:2} [ 13.722430] [ 13.722430] ... which became HARDIRQ-irq-unsafe at: [ 13.732319] ... [ 13.732324] lock_acquire+0xec/0x368 [ 13.735985] _raw_spin_lock+0x60/0x88 [ 13.739452] meson_gpio_irq_domain_alloc+0xcc/0x290 [ 13.744392] irq_domain_alloc_irqs_hierarchy+0x24/0x60 [ 13.749586] __irq_domain_alloc_irqs+0x160/0x2f0 [ 13.754254] irq_create_fwspec_mapping+0x118/0x320 [ 13.759073] irq_create_of_mapping+0x78/0xa0 [ 13.763360] of_irq_get+0x6c/0x80 [ 13.766701] of_mdiobus_register_phy+0x10c/0x238 [of_mdio] [ 13.772227] of_mdiobus_register+0x158/0x380 [of_mdio] [ 13.777388] mdio_mux_init+0x180/0x2e8 [mdio_mux] [ 13.782128] g12a_mdio_mux_probe+0x290/0x398 [mdio_mux_meson_g12a] [ 13.788349] platform_drv_probe+0x5c/0xb0 [ 13.792379] really_probe+0xe4/0x448 [ 13.795979] driver_probe_device+0xe8/0x140 [ 13.800189] __device_attach_driver+0x94/0x120 [ 13.804639] bus_for_each_drv+0x84/0xd8 [ 13.808474] __device_attach+0xe4/0x168 [ 13.812361] device_initial_probe+0x1c/0x28 [ 13.816592] bus_probe_device+0xa4/0xb0 [ 13.820430] deferred_probe_work_func+0xa8/0x100 [ 13.825064] process_one_work+0x264/0x688 [ 13.829088] worker_thread+0x4c/0x458 [ 13.832768] kthread+0x154/0x158 [ 13.836018] ret_from_fork+0x10/0x18 [ 13.839612] [ 13.839612] other info that might help us debug this: [ 13.839612] [ 13.850354] Possible interrupt unsafe locking scenario: [ 13.850354] [ 13.855720] CPU0 CPU1 [ 13.858774] ---- ---- [ 13.863242] lock(&ctl->lock); [ 13.866330] local_irq_disable(); [ 13.872233] lock(&irq_desc_lock_class); [ 13.878705] lock(&ctl->lock); [ 13.884297] <Interrupt> [ 13.886857] lock(&irq_desc_lock_class); [ 13.891014] [ 13.891014] *** DEADLOCK *** The issue can occur when CPU1 is doing something like irq_set_type() and CPU0 performing an interrupt allocation, for example. Taking an interrupt (like the one being reconfigured) would lead to a deadlock. A solution to this is: - Reorder the locking so that meson_gpio_irq_update_bits takes the lock itself at all times, instead of relying on the caller to lock or not, hence making the RMW sequence atomic, - Rework the critical section in meson_gpio_irq_request_channel to only cover the allocation itself, and let the gpio_irq_sel_pin callback deal with its own locking if required, - Take the private spin-lock with interrupts disabled at all times Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-04-17irqchip/sifive-plic: Fix maximum priority threshold valueAtish Patra
As per the PLIC specification, maximum priority threshold value is 0x7 not 0xF. Even though it doesn't cause any error in qemu/hifive unleashed, there may be some implementation which checks the upper bound resulting in an illegal access. Fixes: ccbe80bad571 ("irqchip/sifive-plic: Enable/Disable external interrupts upon cpu online/offline") Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200403014609.71831-1-atish.patra@wdc.com
2020-04-17irqchip/ti-sci-inta: Fix processing of masked irqsGrygorii Strashko
The ti_sci_inta_irq_handler() does not take into account INTA IRQs state (masked/unmasked) as it uses INTA_STATUS_CLEAR_j register to get INTA IRQs status, which provides raw status value. This causes hard IRQ handlers to be called or threaded handlers to be scheduled many times even if corresponding INTA IRQ is masked. Above, first of all, affects the LEVEL interrupts processing and causes unexpected behavior up the system stack or crash. Fix it by using the Interrupt Masked Status INTA_STATUSM_j register which provides masked INTA IRQs status. Fixes: 9f1463b86c13 ("irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20200408191532.31252-1-grygorii.strashko@ti.com Cc: stable@vger.kernel.org
2020-04-17irqchip/mbigen: Free msi_desc on device teardownZenghui Yu
Using irq_domain_free_irqs_common() on the irqdomain free path will leave the MSI descriptor unfreed when platform devices get removed. Properly free it by MSI domain free function. Fixes: 9650c60ebfec0 ("irqchip/mbigen: Create irq domain for each mbigen device") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200408114352.1604-1-yuzenghui@huawei.com
2020-04-16Merge tag 'tag-chrome-platform-fixes-for-v5.7-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome-platform fixes from Benson Leung: "Two small fixes for cros_ec_sensorhub_ring.c, addressing issues introduced in the cros_ec_sensorhub FIFO support commit" * tag 'tag-chrome-platform-fixes-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_sensorhub: Add missing '\n' in log messages platform/chrome: cros_ec_sensorhub: Off by one in cros_sensorhub_send_sample()
2020-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...
2020-04-16amd-xgbe: Use __napi_schedule() in BH contextSebastian Andrzej Siewior
The driver uses __napi_schedule_irqoff() which is fine as long as it is invoked with disabled interrupts by everybody. Since the commit mentioned below the driver may invoke xgbe_isr_task() in tasklet/softirq context. This may lead to list corruption if another driver uses __napi_schedule_irqoff() in IRQ context. Use __napi_schedule() which safe to use from IRQ and softirq context. Fixes: 85b85c853401d ("amd-xgbe: Re-issue interrupt if interrupt status not cleared") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-16mISDN: make dmril and dmrim staticJason Yan
Fix the following sparse warning: drivers/isdn/hardware/mISDN/mISDNisar.c:746:12: warning: symbol 'dmril' was not declared. Should it be static? drivers/isdn/hardware/mISDN/mISDNisar.c:749:12: warning: symbol 'dmrim' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-16net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizesFlorian Fainelli
After commit bfcb813203e619a8960a819bf533ad2a108d8105 ("net: dsa: configure the MTU for switch ports") my Lamobo R1 platform which uses an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail by rejecting a MTU of 1536. The reason for that is that the DMA capabilities are not readable on this version of the IP, and there is also no 'tx-fifo-depth' property being provided in Device Tree. The property is documented as optional, and is not provided. Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so provide these values through platform data as an immediate fix until various Device Tree sources get updated accordingly. Fixes: eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values") Suggested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-16net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware modeDENG Qingfang
In VLAN-unaware mode, the Egress Tag (EG_TAG) field in Port VLAN Control register must be set to Consistent to let tagged frames pass through as is, otherwise their tags will be stripped. Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: René van Dorst <opensource@vdorst.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-16Merge tag 'ceph-for-5.7-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: - a set of patches for a deadlock on "rbd map" error path - a fix for invalid pointer dereference and uninitialized variable use on asynchronous create and unlink error paths. * tag 'ceph-for-5.7-rc2' of git://github.com/ceph/ceph-client: ceph: fix potential bad pointer deref in async dirops cb's rbd: don't mess with a page vector in rbd_notify_op_lock() rbd: don't test rbd_dev->opts in rbd_dev_image_release() rbd: call rbd_dev_unprobe() after unwatching and flushing notifies rbd: avoid a deadlock on header_rwsem when flushing notifies
2020-04-16ahci: Add Intel Comet Lake PCH-U PCI IDKai-Heng Feng
Add Intel Comet Lake PCH-U PCI ID to the list of supported controllers. Set default SATA LPM so the SoC can enter S0ix. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-16irqchip/gic-v4.1: Update effective affinity of virtual SGIsMarc Zyngier
Although the vSGIs are not directly visible to the host, they still get moved around by the CPU hotplug, for example. This results in the kernel moaning on the console, such as: genirq: irq_chip GICv4.1-sgi did not update eff. affinity mask of irq 38 Updating the effective affinity on set_affinity() fixes it. Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-04-16irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signalingMarc Zyngier
When a vPE is made resident, the GIC starts parsing the virtual pending table to deliver pending interrupts. This takes place asynchronously, and can at times take a long while. Long enough that the vcpu enters the guest and hits WFI before any interrupt has been signaled yet. The vcpu then exits, blocks, and now gets a doorbell. Rince, repeat. In order to avoid the above, a (optional on GICv4, mandatory on v4.1) feature allows the GIC to feedback to the hypervisor whether it is done parsing the VPT by clearing the GICR_VPENDBASER.Dirty bit. The hypervisor can then wait until the GIC is ready before actually running the vPE. Plug the detection code as well as polling on vPE schedule. While at it, tidy-up the kernel message that displays the GICv4 optional features. Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-04-16Merge branch 'linux-5.7' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Add missing module firmware for turings. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv4njTRpiNqOC54iRjpd=nu3pBG8i_fp8o_dp7AZE6hFWA@mail.gmail.com
2020-04-16drm/nouveau/sec2/gv100-: add missing MODULE_FIRMWARE()Ben Skeggs
ASB was failing to load on Turing GPUs when firmware is being loaded from initramfs, leaving the GPU in an odd state and causing suspend/ resume to fail. Add missing MODULE_FIRMWARE() lines for initramfs generators. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: <stable@vger.kernel.org> # 5.6
2020-04-16Merge tag 'amd-drm-fixes-5.7-2020-04-15' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.7-2020-04-15: amdgpu: - gfx10 fix - SMU7 overclocking fix - RAS fix - GPU reset fix - Fix a regression in a previous s/r fix - Add a gfxoff quirk Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415221631.3924-1-alexander.deucher@amd.com
2020-04-15Merge tag 'efi-urgent-2020-04-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Misc EFI fixes, including the boot failure regression caused by the BSS section not being cleared by the loaders" * tag 'efi-urgent-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Revert struct layout change to fix kexec boot regression efi/x86: Don't remap text<->rodata gap read-only for mixed mode efi/x86: Fix the deletion of variables in mixed mode efi/libstub/file: Merge file name buffers to reduce stack usage Documentation/x86, efi/x86: Clarify EFI handover protocol and its requirements efi/arm: Deal with ADR going out of range in efi_enter_kernel() efi/x86: Always relocate the kernel for EFI handover entry efi/x86: Move efi stub globals from .bss to .data efi/libstub/x86: Remove redundant assignment to pointer hdr efi/cper: Use scnprintf() for avoiding potential buffer overflow
2020-04-15net: tulip: make early_486_chipsets staticJason Yan
Fix the following sparse warning: drivers/net/ethernet/dec/tulip/tulip_core.c:1280:28: warning: symbol 'early_486_chipsets' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridgeVladimir Oltean
To rehash a previous explanation given in commit 1c44ce560b4d ("net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up"), the switch driver operates the in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. The configuration for this native VLAN is driven in 2 ways: - Set the egress port rewriter to strip the VLAN tag for the native VID (as it is egress-untagged, after all). - Configure the ingress port to drop untagged and priority-tagged traffic, if there is no native VLAN. The intention of this setting is that a trunk port with no native VLAN should not accept untagged traffic. Since both of the above configurations for the native VLAN should only be done if VLAN awareness is requested, they are actually done from the ocelot_port_vlan_filtering function, after the basic procedure of toggling the VLAN awareness flag of the port. But there's a problem with that simplistic approach: we are trying to juggle with 2 independent variables from a single function: - Native VLAN of the port - its value is held in port->vid. - VLAN awareness state of the port - currently there are some issues here, more on that later*. The actual problem can be seen when enslaving the switch ports to a VLAN filtering bridge: 0. The driver configures a pvid of zero for each port, when in standalone mode. While the bridge configures a default_pvid of 1 for each port that gets added as a slave to it. 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true. The VLAN-filtering-dependent portion of the native VLAN configuration is done, considering that the native VLAN is 0. 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true, untagged=true. The native VLAN changes to 1 (change which gets propagated to hardware). 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the VLAN-filtering-dependent portion of the native VLAN configuration, for the new native VLAN of 1. One can notice that after toggling "ip link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0 type bridge vlan_filtering 1", the new native VLAN finally makes it through and untagged traffic finally starts flowing again. But obviously that shouldn't be needed. So it is clear that 2 independent variables need to both re-trigger the native VLAN configuration. So we introduce the second variable as ocelot_port->vlan_aware. *Actually both the DSA Felix driver and the Ocelot driver already had each its own variable: - Ocelot: ocelot_port_private->vlan_aware - Felix: dsa_port->vlan_filtering but the common Ocelot library needs to work with a single, common, variable, so there is some refactoring done to move the vlan_aware property from the private structure into the common ocelot_port structure. Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15Merge tag 'mac80211-for-net-2020-04-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of fixes: * FTM responder policy netlink validation fix (but the only user validates again later) * kernel-doc fixes * a fix for a race in mac80211 radio registration vs. userspace * a mesh channel switch fix * a fix for a syzbot reported kasprintf() issue ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15i2c: tegra: Synchronize DMA before terminationDmitry Osipenko
DMA transfer could be completed, but CPU (which handles DMA interrupt) may get too busy and can't handle the interrupt in a timely manner, despite of DMA IRQ being raised. In this case the DMA state needs to synchronized before terminating DMA transfer in order not to miss the DMA transfer completion. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: tegra: Better handle case where CPU0 is busy for a long timeDmitry Osipenko
Boot CPU0 always handle I2C interrupt and under some rare circumstances (like running KASAN + NFS root) it may stuck in uninterruptible state for a significant time. In this case we will get timeout if I2C transfer is running on a sibling CPU, despite of IRQ being raised. In order to handle this rare condition, the IRQ status needs to be checked after completion timeout. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: remove i2c_new_probed_device APIWolfram Sang
All in-tree users have been converted to the new i2c_new_scanned_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: altera: use proper variable to hold errnoWolfram Sang
device_property_read_u32() returns errno or 0, so we should use the integer variable 'ret' and not the u32 'val' to hold the retval. Fixes: 0560ad576268 ("i2c: altera: Add Altera I2C Controller driver") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHTHans de Goede
We already set DPM_FLAG_SMART_PREPARE, so we completely skip all callbacks (other then prepare) where possible, quoting from dw_i2c_plat_prepare(): /* * If the ACPI companion device object is present for this device, it * may be accessed during suspend and resume of other devices via I2C * operation regions, so tell the PM core and middle layers to avoid * skipping system suspend/resume callbacks for it in that case. */ return !has_acpi_companion(dev); Also setting the DPM_FLAG_SMART_SUSPEND will cause acpi_subsys_suspend() to leave the controller runtime-suspended even if dw_i2c_plat_prepare() returned 0. Leaving the controller runtime-suspended normally, when the I2C controller is suspended during the suspend_late phase, is not an issue because the pm_runtime_get_sync() done by i2c_dw_xfer() will (runtime-)resume it. But for dw I2C controllers on Bay- and Cherry-Trail devices acpi_lpss.c leaves the controller alive until the suspend_noirq phase, because it may be used by the _PS3 ACPI methods of PCI devices and PCI devices are left powered on until the suspend_noirq phase. Between the suspend_late and resume_early phases runtime-pm is disabled. So for any ACPI I2C OPRegion accesses done after the suspend_late phase, the pm_runtime_get_sync() done by i2c_dw_xfer() is a no-op and the controller is left runtime-suspended. i2c_dw_xfer() has a check to catch this condition (rather then waiting for the I2C transfer to timeout because the controller is suspended). acpi_subsys_suspend() leaving the controller runtime-suspended in combination with an ACPI I2C OPRegion access done after the suspend_late phase triggers this check, leading to the following error being logged on a Bay Trail based Lenovo Thinkpad 8 tablet: [ 93.275882] i2c_designware 80860F41:00: Transfer while suspended [ 93.275993] WARNING: CPU: 0 PID: 412 at drivers/i2c/busses/i2c-designware-master.c:429 i2c_dw_xfer+0x239/0x280 ... [ 93.276252] Workqueue: kacpi_notify acpi_os_execute_deferred [ 93.276267] RIP: 0010:i2c_dw_xfer+0x239/0x280 ... [ 93.276340] Call Trace: [ 93.276366] __i2c_transfer+0x121/0x520 [ 93.276379] i2c_transfer+0x4c/0x100 [ 93.276392] i2c_acpi_space_handler+0x219/0x510 [ 93.276408] ? up+0x40/0x60 [ 93.276419] ? i2c_acpi_notify+0x130/0x130 [ 93.276433] acpi_ev_address_space_dispatch+0x1e1/0x252 ... So since on BYT and CHT platforms we want ACPI I2c OPRegion accesses to work until the suspend_noirq phase, we need the controller to be runtime-resumed during the suspend phase if it is runtime-suspended suspended at that time. This means that we must not set the DPM_FLAG_SMART_SUSPEND on these platforms. On BYT and CHT we already have a special ACCESS_NO_IRQ_SUSPEND flag to make sure the controller stays functional until the suspend_noirq phase. This commit makes the driver not set the DPM_FLAG_SMART_SUSPEND flag when that flag is set. Cc: stable@vger.kernel.org Fixes: b30f2f65568f ("i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-14net: marvell10g: soft-reset the PHY when coming out of low powerRussell King
Soft-reset the PHY when coming out of low power mode, which seems to be necessary with firmware versions 0.3.3.0 and 0.3.10.0. This depends on ("net: marvell10g: report firmware version") Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe") Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14net: marvell10g: report firmware versionRussell King
Report the firmware version when probing the PHY to allow issues attributable to firmware to be diagnosed. Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14net/cxgb4: Check the return from t4_query_params properlyJason Gunthorpe
Positive return values are also failures that don't set val, although this probably can't happen. Fixes gcc 10 warning: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized] 3747 | *phy_fw_ver = val; Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14net: stmmac: socfpga: Allow all RGMII modesAtsushi Nemoto
Allow all the RGMII modes to be used. (Not only "rgmii", "rgmii-id" but "rgmii-txid", "rgmii-rxid") Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14net: dsa: mv88e6xxx: Configure MAC when using fixed linkAndrew Lunn
The 88e6185 is reporting it has detected a PHY, when a port is connected to an SFP. As a result, the fixed-phy configuration is not being applied. That then breaks packet transfer, since the port is reported as being down. Add additional conditions to check the interface mode, and if it is fixed always configure the port on link up/down, independent of the PPU status. Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14ionic: fix unused assignmentShannon Nelson
Remove an unused initialized value. Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14ionic: add dynamic_debug headerShannon Nelson
Add the appropriate header for using dynamic_hex_dump(), which seems to be incidentally included in some configurations but not all. Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14net: phy: micrel: use genphy_read_status for KSZ9131Atsushi Nemoto
KSZ9131 will not work with some switches due to workaround for KSZ9031 introduced in commit d2fd719bcb0e83cb39cfee22ee800f98a56eceb3 ("net/phy: micrel: Add workaround for bad autoneg"). Use genphy_read_status instead of dedicated ksz9031_read_status. Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver") Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14Merge tag 'wireless-drivers-2020-04-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.7 First set of fixes for v5.6. Fixes for a crash and for two compiler warnings. brcmfmac * fix a crash related to monitor interface ath11k * fix compiler warnings without CONFIG_THERMAL rtw88 * fix compiler warnings related to suspend and resume functions ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - a series from Tianyu Lan to fix crash reporting on Hyper-V - three miscellaneous cleanup patches * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/Hyper-V: Report crash data in die() when panic_on_oops is set x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set x86/Hyper-V: Report crash register data or kmsg before running crash kernel x86/Hyper-V: Trigger crash enlightenment only once during system crash. x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump x86/Hyper-V: Unload vmbus channel in hv panic callback x86: hyperv: report value of misc_features hv_debugfs: Make hv_debug_root static hv: hyperv_vmbus.h: Replace zero-length array with flexible-array member
2020-04-14drm/amdgpu/gfx9: add gfxoff quirkAlex Deucher
Fix screen corruption with firefox. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=207171 Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-04-14drm/amdgpu: fix the hw hang during perform system reboot and resetPrike Liang
The system reboot failed as some IP blocks enter power gate before perform hw resource destory. Meanwhile use unify interface to set device CGPG to ungate state can simplify the amdgpu poweroff or reset ungate guard. Fixes: 487eca11a321ef ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)") Signed-off-by: Prike Liang <Prike.Liang@amd.com> Tested-by: Mengbing Wang <Mengbing.Wang@amd.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-04-14xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant statusJuergen Gross
xenbus_map_ring_valloc() maps a ring page and returns the status of the used grant (0 meaning success). There are Xen hypervisors which might return the value 1 for the status of a failed grant mapping due to a bug. Some callers of xenbus_map_ring_valloc() test for errors by testing the returned status to be less than zero, resulting in no error detected and crashing later due to a not available ring page. Set the return value of xenbus_map_ring_valloc() to GNTST_general_error in case the grant status reported by Xen is greater than zero. This is part of XSA-316. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wl@xen.org> Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-04-14rtw88: avoid unused function warningsArnd Bergmann
The rtw88 driver defines emtpy functions with multiple indirections but gets one of these wrong: drivers/net/wireless/realtek/rtw88/pci.c:1347:12: error: 'rtw_pci_resume' defined but not used [-Werror=unused-function] 1347 | static int rtw_pci_resume(struct device *dev) | ^~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/pci.c:1342:12: error: 'rtw_pci_suspend' defined but not used [-Werror=unused-function] 1342 | static int rtw_pci_suspend(struct device *dev) Better simplify it to rely on the conditional reference in SIMPLE_DEV_PM_OPS(), and mark the functions as __maybe_unused to avoid warning about it. I'm not sure if these are needed at all given that the functions don't do anything, but they were only recently added. Fixes: 44bc17f7f5b3 ("rtw88: support wowlan feature for 8822c") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200408185413.218643-1-arnd@arndb.de
2020-04-14mac80211_hwsim: Use kstrndup() in place of kasprintf()Tuomas Tynkkynen
syzbot reports a warning: precision 33020 too large WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471 vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547 kvasprintf+0xb2/0x170 lib/kasprintf.c:22 kasprintf+0xbb/0xf0 lib/kasprintf.c:59 hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] ... entry_SYSCALL_64_after_hwframe+0x49/0xbe Thus it seems that kasprintf() with "%.*s" format can not be used for duplicating a string with arbitrary length. Replace it with kstrndup(). Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64, but the code is simpler this way. Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi [johannes: add note about length limit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-14drm/i915/gvt: switch to user vfio_group_pin/upin_pagesYan Zhao
substitute vfio_pin_pages() and vfio_unpin_pages() with vfio_group_pin_pages() and vfio_group_unpin_pages(), so that it will not go through looking up, checking, referencing, dereferencing of VFIO group in each call. Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200313031151.8042-1-yan.y.zhao@intel.com
2020-04-14drm/i915/gvt: subsitute kvm_read/write_guest with vfio_dma_rwYan Zhao
As a device model, it is better to read/write guest memory using vfio interface, so that vfio is able to maintain dirty info of device IOVAs. Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200313031109.7989-1-yan.y.zhao@intel.com
2020-04-14drm/i915/gvt: hold reference of VFIO group during opening of vgpuYan Zhao
hold reference count of the VFIO group for each vgpu at vgpu opening and release the reference at vgpu releasing. Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Reviewed-by: Zhenyu Wang<zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang<zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200313031025.7936-1-yan.y.zhao@intel.com
2020-04-14efi/libstub/file: Merge file name buffers to reduce stack usageArd Biesheuvel
Arnd reports that commit 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine") reworks the file I/O routines in a way that triggers the following warning: drivers/firmware/efi/libstub/file.c:240:1: warning: the frame size of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=] We can work around this issue dropping an instance of efi_char16_t[256] from the stack frame, and reusing the 'filename' field of the file info struct that we use to obtain file information from EFI (which contains the file name even though we already know it since we used it to open the file in the first place) Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200409130434.6736-8-ardb@kernel.org
2020-04-14efi/x86: Always relocate the kernel for EFI handover entryArvind Sankar
Commit d5cdf4cfeac9 ("efi/x86: Don't relocate the kernel unless necessary") tries to avoid relocating the kernel in the EFI stub as far as possible. However, when systemd-boot is used to boot a unified kernel image [1], the image is constructed by embedding the bzImage as a .linux section in a PE executable that contains a small stub loader from systemd that will call the EFI stub handover entry, together with additional sections and potentially an initrd. When this image is constructed, by for example dracut, the initrd is placed after the bzImage without ensuring that at least init_size bytes are available for the bzImage. If the kernel is not relocated by the EFI stub, this could result in the compressed kernel's startup code in head_{32,64}.S overwriting the initrd. To prevent this, unconditionally relocate the kernel if the EFI stub was entered via the handover entry point. [1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images Fixes: d5cdf4cfeac9 ("efi/x86: Don't relocate the kernel unless necessary") Reported-by: Sergey Shatunov <me@prok.pw> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200406180614.429454-2-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200409130434.6736-5-ardb@kernel.org
2020-04-14efi/x86: Move efi stub globals from .bss to .dataArvind Sankar
Commit 3ee372ccce4d ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage") removed the .bss section from the bzImage. However, while a PE loader is required to zero-initialize the .bss section before calling the PE entry point, the EFI handover protocol does not currently document any requirement that .bss be initialized by the bootloader prior to calling the handover entry. When systemd-boot is used to boot a unified kernel image [1], the image is constructed by embedding the bzImage as a .linux section in a PE executable that contains a small stub loader from systemd together with additional sections and potentially an initrd. As the .bss section within the bzImage is no longer explicitly present as part of the file, it is not initialized before calling the EFI handover entry. Furthermore, as the size of the embedded .linux section is only the size of the bzImage file itself, the .bss section's memory may not even have been allocated. In particular, this can result in efi_disable_pci_dma being true even when it was not specified via the command line or configuration option, which in turn causes crashes while booting on some systems. To avoid issues, place all EFI stub global variables into the .data section instead of .bss. As of this writing, only boolean flags for a few command line arguments and the sys_table pointer were in .bss and will now move into the .data section. [1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images Fixes: 3ee372ccce4d ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage") Reported-by: Sergey Shatunov <me@prok.pw> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200406180614.429454-1-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200409130434.6736-4-ardb@kernel.org
generated by cgit (git 2.34.1) at 2025-09-11 05:41:32 +0000