summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-02-01drm/i915/pmu: Fix KMD and GuC race on accessing busynessUmesh Nerlige Ramappa
GuC updates shared memory and KMD reads it. Since this is not synchronized, we run into a race where the value read is inconsistent. Sometimes the inconsistency is in reading the upper MSB bytes of the last_switch_in value. 2 types of cases are seen - upper 8 bits are zero and upper 24 bits are zero. Since these are non-zero values, it is not trivial to determine validity of these values. Instead we read the values multiple times until they are consistent. In test runs, 3 attempts results in consistent values. The upper bound is set to 6 attempts and may need to be tuned as per any new occurences. Since the duration that gt is parked can vary, the patch also updates the gt timestamp on unpark before starting the worker. v2: - Initialize i - Use READ_ONCE to access engine record Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220125020124.788679-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit 512712a824de9b856a4e61343e3e4390eba2c391) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-02-01dma-buf: heaps: Fix potential spectre v1 gadgetJordy Zomer
It appears like nr could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec. Signed-off-by: Jordy Zomer <jordy@pwning.systems> Fixes: c02a81fba74f ("dma-buf: Add dma-buf heaps framework") Cc: <stable@vger.kernel.org> # v5.6+ Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: added fixes and cc: stable tags] Link: https://patchwork.freedesktop.org/patch/msgid/20220129150604.3461652-1-jordy@pwning.systems
2022-01-31net: macsec: Fix offload support for NETDEV_UNREGISTER eventLior Nahmanson
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31net: stmmac: dump gmac4 DMA registers correctlyCamel Guo
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers. This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0": BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30 Write of size 4 at addr ffffffc010177100 by task ethtool/1839 kasan_report+0x200/0x21c __asan_report_store4_noabort+0x34/0x60 dwmac4_dump_dma_regs+0x6d4/0xb30 stmmac_ethtool_gregs+0x110/0x204 ethtool_get_regs+0x200/0x4b0 dev_ethtool+0x1dac/0x3800 dev_ioctl+0x7c0/0xb50 sock_ioctl+0x298/0x6c4 ... Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods") Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHYArınç ÜNAL
Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to properly control MT7530 and MT7531 switch PHYs. A noticeable change is that the behaviour of switchport interfaces going up-down-up-down is no longer there. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31drm/amd: Warn users about potential s0ix problemsMario Limonciello
On some OEM setups users can configure the BIOS for S3 or S2idle. When configured to S3 users can still choose 's2idle' in the kernel by using `/sys/power/mem_sleep`. Before commit 6dc8265f9803 ("drm/amdgpu: always reset the asic in suspend (v2)"), the GPU would crash. Now when configured this way, the system should resume but will use more power. As such, adjust the `amdpu_acpi_is_s0ix function` to warn users about potential power consumption issues during their first attempt at suspending. Reported-by: Bjoren Dasse <bjoern.daase@gmail.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1824 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-31drm/amd/pm: correct the MGpuFanBoost support for Beige GobyEvan Quan
The existing way cannot handle Beige Goby well as a different PPTable data structure(PPTable_beige_goby_t instead of PPTable_t) is used there. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-01-31i40e: Fix reset path while removing the driverKaren Sornek
Fix the crash in kernel while dereferencing the NULL pointer, when the driver is unloaded and simultaneously the VSI rings are being stopped. The hardware requires 50msec in order to finish RX queues disable. For this purpose the driver spins in mdelay function for the operation to be completed. For example changing number of queues which requires reset would fail in the following call stack: 1) i40e_prep_for_reset 2) i40e_pf_quiesce_all_vsi 3) i40e_quiesce_vsi 4) i40e_vsi_close 5) i40e_down 6) i40e_vsi_stop_rings 7) i40e_vsi_control_rx -> disable requires the delay of 50msecs 8) continue back in i40e_down function where i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash When the driver was spinning vsi_release called i40e_vsi_free_arrays where the vsi->tx_rings resources were freed and the pointer was set to NULL. Fixes: 5b6d4a7f20b0 ("i40e: Fix crash during removing i40e driver") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31scsi: hisi_sas: Fix setting of hisi_sas_slot.is_internalJohn Garry
The hisi_sas_slot.is_internal member is not set properly for ATA commands which the driver sends directly. A TMF struct pointer is normally used as a test to set this, but it is NULL for those commands. It's not ideal, but pass an empty TMF struct to set that member properly. Link: https://lore.kernel.org/r/1643627607-138785-1-git-send-email-john.garry@huawei.com Fixes: dc313f6b125b ("scsi: hisi_sas: Factor out task prep and delivery code") Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31drm/nouveau: fix off by one in BIOS boundary checkingNick Lopez
Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed. Signed-off-by: Nick Lopez <github@glowingmonkey.org> Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image") Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
2022-01-31scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_taskJohn Garry
Currently a use-after-free may occur if a sas_task is aborted by the upper layer before we handle the I/O completion in mpi_ssp_completion() or mpi_sata_completion(). In this case, the following are the two steps in handling those I/O completions: - Call complete() to inform the upper layer handler of completion of the I/O. - Release driver resources associated with the sas_task in pm8001_ccb_task_free() call. When complete() is called, the upper layer may free the sas_task. As such, we should not touch the associated sas_task afterwards, but we do so in the pm8001_ccb_task_free() call. Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering. Link: https://lore.kernel.org/r/1643289172-165636-4-git-send-email-john.garry@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31scsi: pm8001: Fix use-after-free for aborted TMF sas_taskJohn Garry
Currently a use-after-free may occur if a TMF sas_task is aborted before we handle the IO completion in mpi_ssp_completion(). The abort occurs due to timeout. When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the sas_task is freed in pm8001_exec_internal_tmf_task(). However, if the I/O completion occurs later, the I/O completion still thinks that the sas_task is available. Fix this by clearing the ccb->task if the TMF times out - the I/O completion handler does nothing if this pointer is cleared. Link: https://lore.kernel.org/r/1643289172-165636-3-git-send-email-john.garry@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31scsi: pm8001: Fix warning for undescribed param in process_one_iomb()John Garry
make W=1 complains of an undescribed function parameter: drivers/scsi/pm8001/pm80xx_hwi.c:3938: warning: Function parameter or member 'circularQ' not described in 'process_one_iomb' Fix it. Link: https://lore.kernel.org/r/1643289172-165636-2-git-send-email-john.garry@huawei.com Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31i40e: Fix reset bw limit when DCB enabled with 1 TCJedrzej Jagielski
There was an AQ error I40E_AQ_RC_EINVAL when trying to reset bw limit as part of bw allocation setup. This was caused by trying to reset bw limit with DCB enabled. Bw limit should not be reset when DCB is enabled. The code was relying on the pf->flags to check if DCB is enabled but if only 1 TC is available this flag will not be set even though DCB is enabled. Add a check for number of TC and if it is 1 don't try to reset bw limit even if pf->flags shows DCB as disabled. Fixes: fa38e30ac73f ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31ACPI: require CRC32 to buildRandy Dunlap
ACPI core now requires crc32() but the kernel build can fail when CRC32 is not set/enabled, so select it in the ACPI Kconfig entry. Fixes this build error: ia64-linux-ld: drivers/acpi/scan.o: in function `acpi_store_pld_crc': include/acpi/platform/aclinuxex.h:62: undefined reference to `crc32_le' Fixes: 882c982dada4 ("acpi: Store CRC-32 hash of the _PLD in struct acpi_device") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-31scsi: core: Reallocate device's budget map on queue depth changeMing Lei
We currently use ->cmd_per_lun as initial queue depth for setting up the budget_map. Martin Wilck reported that it is common for the queue_depth to be subsequently updated in slave_configure() based on detected hardware characteristics. As a result, for some drivers, the static host template settings for cmd_per_lun and can_queue won't actually get used in practice. And if the default values are used to allocate the budget_map, memory may be consumed unnecessarily. Fix the issue by reallocating the budget_map after ->slave_configure() returns. At that time the device queue_depth should accurately reflect what the hardware needs. Link: https://lore.kernel.org/r/20220127153733.409132-1-ming.lei@redhat.com Cc: Bart Van Assche <bvanassche@acm.org> Reported-by: Martin Wilck <martin.wilck@suse.com> Suggested-by: Martin Wilck <martin.wilck@suse.com> Tested-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31scsi: bnx2fc: Make bnx2fc_recv_frame() mp safeJohn Meneghini
Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled. [ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_ [ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B [ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 1391.699183] Call Trace: [ 1391.699188] dump_stack_lvl+0x57/0x7d [ 1391.699198] check_preemption_disabled+0xc8/0xd0 [ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180 [ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc] [ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc] [ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc] [ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc] [ 1391.699258] kthread+0x364/0x420 [ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50 [ 1391.699268] ? set_kthread_struct+0x100/0x100 [ 1391.699273] ret_from_fork+0x22/0x30 Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section. Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism") Tested-by: Guangwu Zhang <guazhang@redhat.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31scsi: pm80xx: Fix double completion for SATA devicesAjish Koshy
Current code handles completions for SATA devices in mpi_sata_completion() and mpi_sata_event(). However, at the time when any SATA event happens, for almost all the event types, the command is still in the target. It is therefore incorrect to complete the task in sata_event(). There are some events for which we get sata_completions, some need recovery procedure and others abort. All the tasks must be completed via sata_completion() path. Removed the task done related code from sata_events(). For tasks where we don't get completions, let top layer call abort() to abort the command post timeout. Link: https://lore.kernel.org/r/20220124082255.86223-1-Ajish.Koshy@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Co-developed-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC statusdavid regan
The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.) The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected. The fix is to stop checking for bad bits only if we already have a bad bits status. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan <dregan@mail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02
2022-01-31iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()Guoqing Jiang
After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error. Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation. Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion. Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated") Suggested-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20220119063640.16864-1-guoqing.jiang@linux.dev Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220128031002.2219155-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-01-31iommu: Fix some W=1 warningsJohn Garry
The code is mostly free of W=1 warning, so fix the following: drivers/iommu/iommu.c:996: warning: expecting prototype for iommu_group_for_each_dev(). Prototype was for __iommu_group_for_each_dev() instead drivers/iommu/iommu.c:3048: warning: Function parameter or member 'drvdata' not described in 'iommu_sva_bind_device' drivers/iommu/ioasid.c:354: warning: Function parameter or member 'ioasid' not described in 'ioasid_get' drivers/iommu/omap-iommu.c:1098: warning: expecting prototype for omap_iommu_suspend_prepare(). Prototype was for omap_iommu_prepare() instead Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/1643366673-26803-1-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-01-31iommu: Fix potential use-after-free during probeVijayanand Jitta
Kasan has reported the following use after free on dev->iommu. when a device probe fails and it is in process of freeing dev->iommu in dev_iommu_free function, a deferred_probe_work_func runs in parallel and tries to access dev->iommu->fwspec in of_iommu_configure path thus causing use after free. BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4 Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x33c show_stack+0x18/0x24 dump_stack_lvl+0x16c/0x1e0 print_address_description+0x84/0x39c __kasan_report+0x184/0x308 kasan_report+0x50/0x78 __asan_load8+0xc0/0xc4 of_iommu_configure+0xb4/0x4a4 of_dma_configure_id+0x2fc/0x4d4 platform_dma_configure+0x40/0x5c really_probe+0x1b4/0xb74 driver_probe_device+0x11c/0x228 __device_attach_driver+0x14c/0x304 bus_for_each_drv+0x124/0x1b0 __device_attach+0x25c/0x334 device_initial_probe+0x24/0x34 bus_probe_device+0x78/0x134 deferred_probe_work_func+0x130/0x1a8 process_one_work+0x4c8/0x970 worker_thread+0x5c8/0xaec kthread+0x1f8/0x220 ret_from_fork+0x10/0x18 Allocated by task 1: ____kasan_kmalloc+0xd4/0x114 __kasan_kmalloc+0x10/0x1c kmem_cache_alloc_trace+0xe4/0x3d4 __iommu_probe_device+0x90/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Freed by task 1: kasan_set_track+0x4c/0x84 kasan_set_free_info+0x28/0x4c ____kasan_slab_free+0x120/0x15c __kasan_slab_free+0x18/0x28 slab_free_freelist_hook+0x204/0x2fc kfree+0xfc/0x3a4 __iommu_probe_device+0x284/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Fix this by setting dev->iommu to NULL first and then freeing dev_iommu structure in dev_iommu_free function. Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com> Link: https://lore.kernel.org/r/1643613155-20215-1-git-send-email-quic_vjitta@quicinc.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-01-31spi: mediatek: Avoid NULL pointer crash in interruptBenjamin Gaignard
In some case, like after a transfer timeout, master->cur_msg pointer is NULL which led to a kernel crash when trying to use master->cur_msg->spi. mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter avoid the problem by setting NULL as second parameter. Fixes: a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-31moxart: fix potential use-after-free on remove pathGreg Kroah-Hartman
It was reported that the mmc host structure could be accessed after it was freed in moxart_remove(), so fix this by saving the base register of the device and using it instead of the pointer dereference. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Xin Xiong <xiongx18@fudan.edu.cn> Cc: Xin Tan <tanxin.ctf@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Yang Li <yang.lee@linux.alibaba.com> Cc: linux-mmc@vger.kernel.org Cc: stable <stable@vger.kernel.org> Reported-by: whitehat002 <hackyzh002@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-31of: unittest: update text of expected warningsFrank Rowand
The text of various warning messages triggered by unittest has changed. Update the text of expected warnings to match. The expected vs actual warnings are most easily seen by filtering the boot console messages with the of_unittest_expect program at https://github.com/frowand/dt_tools.git. The filter prefixes problem lines with '***', and prefixes lines that match expected errors with 'ok '. All other lines are prefixed with ' '. Unrelated lines have been deleted in the following examples. The mismatch appears as: -> ### dt-test ### start of unittest - you will see error messages OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ** of_unittest_expect WARNING - not found ---> OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found ** of_unittest_expect WARNING - not found ---> platform testcase-data:testcase-device2: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 42 ** EXPECT not found : 4 With this commit applied, the mismatch is resolved: -> ### dt-test ### start of unittest - you will see error messages ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1 ok OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1 ok platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found -> ### dt-test ### end of unittest - 254 passed, 0 failed ** EXPECT statistics: ** ** EXPECT found : 46 ** EXPECT not found : 0 Fixes: 2043727c2882 ("driver core: platform: Make use of the helper function dev_err_probe()") Fixes: 94a4950a4acf ("of: base: Fix phandle argument length mismatch error message") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220127192643.2534941-1-frowand.list@gmail.com
2022-01-31mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_workJaeMan Park
In mac80211_hwsim, the probe_req frame is created and sent while scanning. It is sent with ieee80211_tx_info which is not initialized. Uninitialized ieee80211_tx_info can cause problems when using mac80211_hwsim with wmediumd. wmediumd checks the tx_rates field of ieee80211_tx_info and doesn't relay probe_req frame to other clients even if it is a broadcasting message. Call ieee80211_tx_prepare_skb() to initialize ieee80211_tx_info for the probe_req that is created by hw_scan_work in mac80211_hwsim. Signed-off-by: JaeMan Park <jaeman@google.com> Link: https://lore.kernel.org/r/20220113060235.546107-1-jaeman@google.com [fix memory leak] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-31mac80211_hwsim: report NOACK frames in tx_statusBenjamin Beichler
Add IEEE80211_TX_STAT_NOACK_TRANSMITTED to tx_status flags to have proper statistics for non-acked frames. Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de> Link: https://lore.kernel.org/r/20220111221327.1499881-1-benjamin.beichler@uni-rostock.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-31n_tty: wake up poll(POLLRDNORM) on receiving dataTATSUKAWA KOSUKE (立川 江介)
The poll man page says POLLRDNORM is equivalent to POLLIN when used as an event. $ man poll <snip> POLLRDNORM Equivalent to POLLIN. However, in n_tty driver, POLLRDNORM does not return until timeout even if there is terminal input, whereas POLLIN returns. The following test program works until kernel-3.17, but the test stops in poll() after commit 57087d515441 ("tty: Fix spurious poll() wakeups"). [Steps to run test program] $ cc -o test-pollrdnorm test-pollrdnorm.c $ ./test-pollrdnorm foo <-- Type in something from the terminal followed by [RET]. The string should be echoed back. ------------------------< test-pollrdnorm.c >------------------------ #include <stdio.h> #include <errno.h> #include <poll.h> #include <unistd.h> void main(void) { int n; unsigned char buf[8]; struct pollfd fds[1] = {{ 0, POLLRDNORM, 0 }}; n = poll(fds, 1, -1); if (n < 0) perror("poll"); n = read(0, buf, 8); if (n < 0) perror("read"); if (n > 0) write(1, buf, n); } ------------------------------------------------------------------------ The attached patch fixes this problem. Many calls to wake_up_interruptible_poll() in the kernel source code already specify "POLLIN | POLLRDNORM". Fixes: 57087d515441 ("tty: Fix spurious poll() wakeups") Cc: stable@vger.kernel.org Signed-off-by: Kosuke Tatsukawa <tatsu-ab1@nec.com> Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: f_uac2: Define specific wTerminalTypePavel Hofman
Several users have reported that their Win10 does not enumerate UAC2 gadget with the existing wTerminalType set to UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g. https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213. While the constant is officially defined by the USB terminal types document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines no undefined output terminal type in its usbaudio20.h header. Therefore wTerminalType of EP-IN is set to UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220131071813.7433-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transitionAdam Ford
The support the external role switch a variety of situations were addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE leaves the host up which can cause some error messages when switching from host to none, to gadget, to none, and then back to host again. xhci-hcd ee000000.usb: Abort failed to stop command ring: -110 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead xhci-hcd ee000000.usb: HC died; cleaning up usb 4-1: device not accepting address 6, error -108 usb usb4-port1: couldn't allocate usb_device After this happens it will not act as a host again. Fix this by releasing the host mode when transitioning to USB_ROLE_NONE. Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: raw-gadget: fix handling of dual-direction-capable endpointsJann Horn
Under dummy_hcd, every available endpoint is *either* IN or OUT capable. But with some real hardware, there are endpoints that support both IN and OUT. In particular, the PLX 2380 has four available endpoints that each support both IN and OUT. raw-gadget currently gets confused and thinks that any endpoint that is usable as an IN endpoint can never be used as an OUT endpoint. Fix it by looking at the direction in the configured endpoint descriptor instead of looking at the hardware capabilities. With this change, I can use the PLX 2380 with raw-gadget. Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface") Cc: stable <stable@vger.kernel.org> Tested-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20220126205214.2149936-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: usb251xb: add boost-up property supportTommaso Merciai
Add support for boost-up register of usb251xb hub. boost-up property control USB electrical drive strength This register can be set: - Normal mode -> 0x00 - Low -> 0x01 - Medium -> 0x10 - High -> 0x11 (Normal Default) References: - http://www.mouser.com/catalog/specsheets/2514.pdf p29 Reviewed-by: Richard Leitner <richard.leitner@linux.dev> Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> Link: https://lore.kernel.org/r/20220128181713.96856-1-tomm.merciai@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31Input: wm97xx: Simplify resource managementChristophe JAILLET
Since the commit in the Fixes tag below, 'wm->input_dev' is a managed resource that doesn't need to be explicitly unregistered or freed (see devm_input_allocate_device() documentation) So, remove some unless line of code to slightly simplify it. Fixes: c72f61e74073 ("Input: wm97xx: split out touchscreen registering") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/87dce7e80ea9b191843fa22415ca3aef5f3cc2e6.1643529968.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-31usb: ulpi: Call of_node_put correctlySean Anderson
of_node_put should always be called on device nodes gotten from of_get_*. Additionally, it should only be called after there are no remaining users. To address the first issue, call of_node_put if later steps in ulpi_register fail. To address the latter, call put_device if device_register fails, which will call ulpi_dev_release if necessary. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-3-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31usb: ulpi: Move of_node_put to ulpi_dev_releaseSean Anderson
Drivers are not unbound from the device when ulpi_unregister_interface is called. Move of_node-freeing code to ulpi_dev_release which is called only after all users are gone. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-2-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31pinctrl: microchip-sgpio: Fix support for regmapHoratiu Vultur
Initially the driver accessed the registers using u32 __iomem but then in the blamed commit it changed it to use regmap. The problem is that now the offset of the registers is not calculated anymore at word offset but at byte offset. Therefore make sure to multiply the offset with word size. Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com> Reviewed-by: Colin Foster <colin.foster@in-advantage.com> Fixes: 2afbbab45c261a ("pinctrl: microchip-sgpio: update to support regmap") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220131085201.307031-1-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-01-31USB: serial: option: add ZTE MF286D modemPawel Dembicki
Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=19d2 ProdID=1485 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=MF286DZTED000000 C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-01-31USB: serial: ch341: add support for GW Instek USB2.0-Serial devicesStephan Brunner
Programmable lab power supplies made by GW Instek, such as the GPP-2323, have a USB port exposing a serial port to control the device. Stringing the supplied Windows driver, references to the ch341 chip are found. Binding the existing ch341 driver to the VID/PID of the GPP-2323 ("GW Instek USB2.0-Serial" as per the USB product name) works out of the box, communication and control is now possible. This patch should work with any GPP series power supply due to similarities in the product line. Signed-off-by: Stephan Brunner <s.brunner@stephan-brunner.net> Link: https://lore.kernel.org/r/4a47b864-0816-6f6a-efee-aa20e74bcdc6@stephan-brunner.net Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-01-31usb: f_fs: Fix use-after-free for epfileUdipto Goswami
Consider a case where ffs_func_eps_disable is called from ffs_func_disable as part of composition switch and at the same time ffs_epfile_release get called from userspace. ffs_epfile_release will free up the read buffer and call ffs_data_closed which in turn destroys ffs->epfiles and mark it as NULL. While this was happening the driver has already initialized the local epfile in ffs_func_eps_disable which is now freed and waiting to acquire the spinlock. Once spinlock is acquired the driver proceeds with the stale value of epfile and tries to free the already freed read buffer causing use-after-free. Following is the illustration of the race: CPU1 CPU2 ffs_func_eps_disable epfiles (local copy) ffs_epfile_release ffs_data_closed if (last file closed) ffs_data_reset ffs_data_clear ffs_epfiles_destroy spin_lock dereference epfiles Fix this races by taking epfiles local copy & assigning it under spinlock and if epfiles(local) is null then update it in ffs->epfiles then finally destroy it. Extending the scope further from the race, protecting the ep related structures, and concurrent accesses. Fixes: a9e6f83c2df1 ("usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable") Co-developed-by: Udipto Goswami <quic_ugoswami@quicinc.com> Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Pratham Pratap <quic_ppratap@quicinc.com> Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Link: https://lore.kernel.org/r/1643256595-10797-1-git-send-email-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31drm/i915/adlp: Fix TypeC PHY-ready status readoutImre Deak
The TCSS_DDI_STATUS register is indexed by tc_port not by the FIA port index, fix this up. This only caused an issue on TC#3/4 ports in legacy mode, as in all other cases the two indices either match (on TC#1/2) or the TCSS_DDI_STATUS_READY flag is set regardless of something being connected or not (on TC#1/2/3/4 in dp-alt and tbt-alt modes). Reported-and-tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Fixes: 55ce306c2aa1 ("drm/i915/adl_p: Implement TC sequences") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4698 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v5.14+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220126104356.2022975-1-imre.deak@intel.com (cherry picked from commit 516b33460c5bee78b2055637b0547bdb0e6af754) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31drm/i915/pmu: Use PM timestamp instead of RING TIMESTAMP for referenceUmesh Nerlige Ramappa
All timestamps returned by GuC for GuC PMU busyness are captured from GUC PM TIMESTAMP. Since this timestamp does not tick when GuC goes idle, kmd uses RING_TIMESTAMP to measure busyness of an engine with an active context. In further stress testing, the MMIO read of the RING_TIMESTAMP is seen to cause a rare hang. Resolve the issue by using gt specific timestamp from PM which is in sync with the GuC PM timestamp. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220111015523.225562-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 721fd84ea1fe957453587efad5fdc44dfba58e04) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31drm/i915/overlay: Prevent divide by zero bugs in scalingDan Carpenter
Smatch detected a divide by zero bug in check_overlay_scaling(). drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_height'. drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_width'. Prevent this by ensuring that the dst height and width are non-zero. Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili (cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31drm/i915: Lock timeline mutex directly in error path of eb_pin_timelineMatthew Brost
Don't use the interruptable version of the timeline mutex lock in the error path of eb_pin_timeline as the cleanup must always happen. v2: (John Harrison) - Don't check for interrupt during mutex lock v3: (Tvrtko) - A comment explaining why lock helper isn't used Fixes: 544460c33821 ("drm/i915: Multi-BB execbuf") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220111163929.14017-1-matthew.brost@intel.com (cherry picked from commit cb935c4618bd2ff9058feee4af7088446da6a763) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31drm/i915: Allocate intel_engine_coredump_alloc with ALLOW_FAILMatthew Brost
Allocate intel_engine_coredump_alloc with ALLOW_FAIL rather than GFP_KERNEL to fully decouple the error capture from fence signalling. v2: (John Harrison) - Fix typo in commit message (s/do/to) Fixes: 8b91cdd4f8649 ("drm/i915: Use __GFP_KSWAPD_RECLAIM in the capture code") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220121043118.24886-2-matthew.brost@intel.com (cherry picked from commit 4f72fc3c7f3d9f29a438bb0e17c7773f2fc8242a) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31usb: dwc3: xilinx: fix uninitialized return valueRobert Hancock
A previous patch to skip part of the initialization when a USB3 PHY was not present could result in the return value being uninitialized in that case, causing spurious probe failures. Initialize ret to 0 to avoid this. Fixes: 9678f3361afc ("usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode") Cc: <stable@vger.kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220127221500.177021-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-31crypto: octeontx2 - Avoid stack variable overflowKees Cook
Building with -Warray-bounds showed a stack variable array index overflow. Increase the expected size of the array to avoid the warning: In file included from ./include/linux/printk.h:555, from ./include/asm-generic/bug.h:22, from ./arch/x86/include/asm/bug.h:84, from ./include/linux/bug.h:5, from ./include/linux/mmdebug.h:5, from ./include/linux/gfp.h:5, from ./include/linux/firmware.h:7, from drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c:5: drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c: In function 'otx2_cpt_print_uc_dbg_info': ./include/linux/dynamic_debug.h:162:33: warning: array subscript 4 is above array bounds of 'u32[4]' {aka 'unsigned int[4]'} [-Warray-bounds] 162 | _dynamic_func_call(fmt, __dynamic_pr_debug, \ | ^ ./include/linux/dynamic_debug.h:134:17: note: in definition of macro '__dynamic_func_call' 134 | func(&id, ##__VA_ARGS__); \ | ^~~~ ./include/linux/dynamic_debug.h:162:9: note: in expansion of macro '_dynamic_func_call' 162 | _dynamic_func_call(fmt, __dynamic_pr_debug, \ | ^~~~~~~~~~~~~~~~~~ ./include/linux/printk.h:570:9: note: in expansion of macro 'dynamic_pr_debug' 570 | dynamic_pr_debug(fmt, ##__VA_ARGS__) | ^~~~~~~~~~~~~~~~ drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c:1807:41: note: in expansion of macro 'pr_debug' 1807 | pr_debug("Mask: %8.8x %8.8x %8.8x %8.8x %8.8x", | ^~~~~~~~ drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c:1765:13: note: while referencing 'mask' 1765 | u32 mask[4]; | ^~~~ This is justified because the mask size (eng_grps->engs_num) can be at most 144 (OTX2_CPT_MAX_ENGINES bits), which is larger than available storage. 4 * 32 == 128, so this must be 5: 5 * 32bit = 160. Additionally clear the mask before conversion so trailing bits are zero. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Arnaud Ebalard <arno@natisbad.org> Cc: Srujana Challa <schalla@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Suheil Chandran <schandran@marvell.com> Cc: Shijith Thotton <sthotton@marvell.com> Cc: Lukasz Bartosik <lbartosik@marvell.com> Cc: linux-crypto@vger.kernel.org Fixes: d9d7749773e8 ("crypto: octeontx2 - add apis for custom engine groups") Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-01-30iio: Fix error handling for PMMiaoqian Lin
The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We should do this in error handling. Fix this problem for the following drivers: bmc150, bmg160, kmx61, kxcj-1013, mma9551, mma9553. Fixes: 7d0ead5c3f00 ("iio: Reconcile operation order between iio_register/unregister and pm functions") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220106112309.16879-1-linmq006@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-30iio: addac: ad74413r: correct comparator gpio getters mask usageCosmin Tanislav
The value of the GPIOs is currently altered using offsets rather than masks. Make use of __assign_bit and the BIT macro to turn the offsets into masks. Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220111074703.3677392-2-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-30iio: addac: ad74413r: use ngpio size when iterating over maskCosmin Tanislav
ngpio is the actual number of GPIOs handled by the GPIO chip, as opposed to the max number of GPIOs. Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220111074703.3677392-1-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-30iio: addac: ad74413r: Do not reference negative array offsetsKees Cook
Instead of aiming rx_buf at an invalid array-boundary-crossing location, just skip the first increment. Seen when building with -Warray-bounds: drivers/iio/addac/ad74413r.c: In function 'ad74413r_update_scan_mode': drivers/iio/addac/ad74413r.c:843:22: warning: array subscript -4 is below array bounds of 'u8[16]' { aka 'unsigned char[16]'} [-Warray-bounds] 843 | u8 *rx_buf = &st->adc_samples_buf.rx_buf[-1 * AD74413R_FRAME_SIZE]; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/iio/addac/ad74413r.c:84:20: note: while referencing 'rx_buf' 84 | u8 rx_buf[AD74413R_FRAME_SIZE * AD74413R_CHANNEL_MAX]; | ^~~~~~ Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220112203456.3950884-1-keescook@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-15 05:05:46 +0000