| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- pca955x: Add HW blink support, utilizing PWM0. It supports one
frequency across all blinking LEDs and falls back to software blink
if different frequencies are requested.
- trigger: netdev: Allow configuring LED blink interval via .blink_set
even when HW offload (.hw_control) is enabled.
- led-core: Fix a race condition where a quick LED_OFF followed by
another brightness set could leave the LED off incorrectly,
especially noticeable after the introduction of the ordered
workqueue.
- qcom-lpg: Add support for 6-bit PWM resolution alongside the existing
9-bit support.
- qcom-lpg: Fix PWM value capping to respect the selected resolution
(6-bit or 9-bit) for normal PWMs.
- qcom-lpg: Fix PWM value capping to respect the selected resolution
for Hi-Res PWMs.
- qcom-lpg: Fix calculation of the best period for Hi-Res PWMs to
prevent requested duty cycles from exceeding the maximum allowed by
the selected resolution.
- st1202: Add a check for the error code returned by devm_mutex_init().
- pwm-multicolor: Add a check for the return value of
fwnode_property_read_u32().
- st1202: Ensure hardware initialization (st1202_setup) happens before
DT node processing (st1202_dt_init).
- Kconfig: leds-st1202: Add select LEDS_TRIGGER_PATTERN as it's
required by the driver.
- lp8860: Drop unneeded explicit assignment to REGCACHE_NONE.
- pca955x: Refactor code with helper functions and rename some
functions/variables for clarity.
- pca955x: Pass driver data pointers instead of the I2C client to
helper functions.
- pca955x: Optimize probe LED selection logic to reduce I2C operations.
- pca955x: Revert the removal of pca95xx_num_led_regs() (renaming it to
pca955x_num_led_regs) as it's needed for HW blink support.
- st1202: Refactor st1202_led_set() to use the !! operator for boolean
conversion.
- st1202: Minor spacing and proofreading edits in comments.
- Directory Rename: Rename the drivers/leds/simple directory to
drivers/leds/simatic as the drivers within are not simple.
- mlxcpld: Remove unused include of acpi.h.
- nic78bx: Tidy up the ACPI ID table (remove ACPI_PTR, use
mod_devicetable.h, remove explicit driver_data initializer).
- tlc591xx: Convert text binding to YAML format, add child node
constraints, and fix typos/formatting in the example.
- qcom-lpg: Document the qcom,pm8937-pwm compatible string as a
fallback for qcom,pm8916-pwm.
* tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (23 commits)
leds: nic78bx: Tidy up ACPI ID table
leds: mlxcpld: Remove unused ACPI header inclusion
leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs
leds: rgb: leds-qcom-lpg: Fix pwm resolution max for Hi-Res PWMs
leds: rgb: leds-qcom-lpg: Fix pwm resolution max for normal PWMs
leds: Rename simple directory to simatic
leds: Kconfig: leds-st1202: Add select for required LEDS_TRIGGER_PATTERN
leds: leds-st1202: Spacing and proofreading editing
leds: leds-st1202: Initialize hardware before DT node child operations
leds: pwm-multicolor: Add check for fwnode_property_read_u32
leds: rgb: leds-qcom-lpg: Add support for 6-bit PWM resolution
leds: Fix LED_OFF brightness race
Revert "leds-pca955x: Remove the unused function pca95xx_num_led_regs()"
leds: st1202: Refactor st1202_led_set() to use !! operator for boolean conversion
dt-bindings: leds: qcom-lpg: Document PM8937 PWM compatible
leds: pca955x: Add HW blink support
leds: pca955x: Optimize probe LED selection
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Refactor with helper functions and renaming
dt-bindings: leds: Convert leds-tlc591xx.txt to yaml format
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Only a couple of small patches this release, one refactoring struct
regmap to pack it more efficiently and another which makes our way of
setting all bits consistent in the regmap-irq code"
* tag 'regmap-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Use one way of setting all bits in the register
regmap: Reorder 'struct regmap'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- drop parisc specific memcpy_fromio() function
- clean up coding style and fix compile warnings
* tag 'parisc-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: led: Use scnprintf() to avoid string truncation warning
Input: gscps2 - Describe missing function parameters
parisc: perf: use named initializers for struct miscdevice
parisc: PDT: Fix missing prototype warning
parisc: Remove memcpy_fromio
parisc: Fix formatting errors in io.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- Add support for multi-cluster configuration
- Add quirks for enabling multi-cluster mode on EyeQ6
- Add DTS clocks for ralink
- Cleanup realtek DTS
- Other cleanups and fixes
* tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (35 commits)
MIPS: config: omega2+, vocore2: enable CLK_MTMIPS
arch: mips: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
MIPS: cm: Fix warning if MIPS_CM is disabled
MIPS: Fix Macro name
MIPS: ds1287: Match ds1287_set_base_clock() function types
MIPS: cevt-ds1287: Add missing ds1287.h include
MIPS: dec: Declare which_prom() as static
MIPS: Loongson2ef: Replace deprecated strncpy() with strscpy()
mips: dts: ralink: mt7628a: update system controller node and its consumers
mips: dts: ralink: mt7620a: update system controller node and its consumers
mips: dts: ralink: rt3883: update system controller node and its consumers
mips: dts: ralink: rt3050: update system controller node and its consumers
mips: dts: ralink: rt2880: update system controller node and its consumers
dt-bindings: clock: add clock definitions for Ralink SoCs
MIPS: Use arch specific syscall name match function
mips: dts: realtek: Add restart to Cisco SG220-26P
mips: dts: realtek: Add RTL838x SoC peripherals
mips: dts: realtek: Replace uart clock property
mips: dts: realtek: Correct uart interrupt-parent
mips: dts: realtek: Add SoC IRQ node for RTL838x
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for debug
builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with
additional conditions, add a new ALT_TYPE_FEATURE alternative to
provide a static branch via alternative patching. Also, move machine
feature detection to the decompressor for early patching and add
debugging functionality to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to
mismatched semantics and lack of known users, relying on asm-generic
fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
* tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits)
s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies
s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool()
s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()
s390/boot: Ignore vmlinux.map
s390/sysctl: Remove "vm/allocate_pgste" sysctl
s390: Remove 2k vs 4k page table leftovers
s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
s390/lowcore: Use lghi instead llilh to clear register
s390/syscall: Merge __do_syscall() and do_syscall()
s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly
s390/smp: Implement raw_smp_processor_id() with inline assembly
s390/current: Implement current with inline assembly
s390/lowcore: Use inline qualifier for get_lowcore() inline assembly
s390: Move s390 sysctls into their own file under arch/s390
s390/syscall: Simplify syscall_get_arguments()
s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed
s390: Remove ioremap_wt() and pgprot_writethrough()
s390/mm: Add configurable STRICT_MM_TYPECHECKS
s390/mm: Convert pgste_val() into function
s390/mm: Convert pgprot_val() into function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Decouple mixed mode startup code from the traditional x86
decompressor
- Revert zero-length file hack in efivarfs
- Prevent EFI zboot from using the CopyMem/SetMem boot services after
ExitBootServices()
- Update EFI zboot to use the ZLIB/ZSTD library interfaces directly
* tag 'efi-next-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: Avoid legacy decompressor zlib/zstd wrappers
efi/libstub: Avoid CopyMem/SetMem EFI services after ExitBootServices
efi: efibc: change kmalloc(size * count, ...) to kmalloc_array()
efivarfs: Revert "allow creation of zero length files"
x86/efi/mixed: Move mixed mode startup code into libstub
x86/efi/mixed: Simplify and document thunking logic
x86/efi/mixed: Remove dependency on legacy startup_32 code
x86/efi/mixed: Set up 1:1 mapping of lower 4GiB in the stub
x86/efi/mixed: Factor out and clean up long mode entry
x86/efi/mixed: Check CPU compatibility without relying on verify_cpu()
x86/efistub: Merge PE and handover entrypoints
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix ref counting errors in interrupt parsing code
- Allow "nonposted-mmio" property per device and on non-Apple h/w
- Use typed accessors in platform driver code
- Fix mismatch between DT MAX_PHANDLE_ARGS and
NR_FWNODE_REFERENCE_ARGS and increase the maximum number args
- Rework of_resolve_phandles() to use __free() cleanup and fix ref
count error
- Use of_prop_cmp() in a few more places
- Improve make_fit.py script error handling
DT bindings:
- Update DT property ordering rules for properties within groups
(i.e. common suffix)
- Update DT submitting-patches doc to cover sending .dts patches and
SoC maintainer rules on being warning free against linux-next
- Add ti,tps53681, ti,tps53681, Maxim max15301, max15303, and
max20751 to trivial devices
- Add Renesas RZ/V2H(P) and Allwinner H616 support to Arm Mali
Bifrost GPU. Add Samsung exynos7870 support to Arm Mail Midgard.
- Rework qcom,ebi2 and samsung,exynos4210-sram memory controller
bindings to split child node properties. Fix the LAN9115 binding to
use the child node schema so all properties are documented.
- Convert nxp,lpc3220-mic and Altera ECC manager bindings to schema
- Fix some issues with LVDS display panels causing validation
warnings
- Drop some obsolete parts of Xilinx bindings"
* tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (48 commits)
scripts/make_fit: Print DT name before libfdt errors
dt-bindings: edac: altera: socfpga: Convert to YAML
dt-bindings: pps: gpio: Correct indentation and style in DTS example
media: dt-bindings: mediatek,vcodec-encoder: Drop assigned-clock properties
of: address: Allow to specify nonposted-mmio per-device
of: address: Expand nonposted-mmio to non-Apple Silicon platforms
docs: dt-bindings: Specify ordering for properties within groups
dt-bindings: gpu: arm,mali-midgard: add exynos7870-mali compatible
of: Move of_prop_val_eq() next to the single user
of/platform: Use typed accessors rather than of_get_property()
dt-bindings: trivial-devices: Add Maxim max15301, max15303, and max20751
dt-bindings: fsi: ibm,p9-scom: Add "ibm,fsi2pib" compatible
dt-bindings: memory-controllers: qcom,ebi2: Enforce child props
dt-bindings: memory-controllers: samsung,exynos4210-srom: Enforce child props
dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
dt-bindings: display: mitsubishi,aa104xd12: Allow jeida-18 for data-mapping
dt-bindings: interrupt-controller: Convert nxp,lpc3220-mic.txt to yaml format
docs: process: maintainer-soc-clean-dts: linux-next is decisive
docs: dt: submitting-patches: Document sending DTS patches
of: Align macro MAX_PHANDLE_ARGS with NR_FWNODE_REFERENCE_ARGS
...
|
|
Pull rdma updates from Jason Gunthorpe:
- Usual minor updates and fixes for bnxt_re, hfi1, rxe, mana, iser,
mlx5, vmw_pvrdma, hns
- Make rxe work on tun devices
- mana gains more standard verbs as it moves toward supporting
in-kernel verbs
- DMABUF support for mana
- Fix page size calculations when memory registration exceeds 4G
- On Demand Paging support for rxe
- mlx5 support for RDMA TRANSPORT flow tables and a new ucap mechanism
to access control use of them
- Optional RDMA_TX/RX counters per QP in mlx5
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (73 commits)
IB/mad: Check available slots before posting receive WRs
RDMA/mana_ib: Fix integer overflow during queue creation
RDMA/mlx5: Fix calculation of total invalidated pages
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
RDMA/mlx5: Fix page_size variable overflow
RDMA/mlx5: Drop access_flags from _mlx5_mr_cache_alloc()
RDMA/mlx5: Fix cache entry update on dereg error
RDMA/mlx5: Fix MR cache initialization error flow
RDMA/mlx5: Support optional-counters binding for QPs
RDMA/mlx5: Compile fs.c regardless of INFINIBAND_USER_ACCESS config
RDMA/core: Pass port to counter bind/unbind operations
RDMA/core: Add support to optional-counters binding configuration
RDMA/core: Create and destroy rdma_counter using rdma_zalloc_drv_obj()
RDMA/mlx5: Add optional counters for RDMA_TX/RX_packets/bytes
RDMA/core: Fix use-after-free when rename device name
RDMA/bnxt_re: Support perf management counters
RDMA/rxe: Fix incorrect return value of rxe_odp_atomic_op()
RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
RDMA/mana_ib: Handle net event for pointing to the current netdev
net: mana: Change the function signature of mana_get_primary_netdev_rcu
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl subsystem from Jason Gunthorpe:
"fwctl is a new subsystem intended to bring some common rules and order
to the growing pattern of exposing a secure FW interface directly to
userspace.
Unlike existing places like RDMA/DRM/VFIO/uacce that are exposing a
device for datapath operations fwctl is focused on debugging,
configuration and provisioning of the device. It will not have the
necessary features like interrupt delivery to support a datapath.
This concept is similar to the long standing practice in the "HW" RAID
space of having a device specific misc device to manage the RAID
controller FW. fwctl generalizes this notion of a companion debug and
management interface that goes along with a dataplane implemented in
an appropriate subsystem.
There have been three LWN articles written discussing various aspects
of this:
https://lwn.net/Articles/955001/
https://lwn.net/Articles/969383/
https://lwn.net/Articles/990802/
This includes three drivers to launch the subsystem:
- CXL provides a vendor scheme for executing commands and a way to
learn the 'command effects' (ie the security properties) of such
commands. The fwctl driver allows access to these mechanism within
the fwctl security model
- mlx5 is family of networking products, the driver supports all
current Mellanox HW still receiving FW feature updates. This
includes RDMA multiprotocol NICs like ConnectX and the Bluefield
family of Smart NICs.
- AMD/Pensando Distributed Services card is a multi protocol Smart
NIC with a multi PCI function design. fwctl works on the management
PCI function following a 'command effects' model similar to CXL"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (30 commits)
pds_fwctl: add Documentation entries
pds_fwctl: add rpc and query support
pds_fwctl: initial driver framework
pds_core: add new fwctl auxiliary_device
pds_core: specify auxiliary_device to be created
pds_core: make pdsc_auxbus_dev_del() void
cxl: Fixup kdoc issues for include/cxl/features.h
fwctl/cxl: Add documentation to FWCTL CXL
cxl/test: Add Set Feature support to cxl_test
cxl/test: Add Get Feature support to cxl_test
cxl: Add support to handle user feature commands for set feature
cxl: Add support to handle user feature commands for get feature
cxl: Add support for fwctl RPC command to enable CXL feature commands
cxl: Move cxl feature command structs to user header
cxl: Add FWCTL support to CXL
mlx5: Create an auxiliary device for fwctl_mlx5
fwctl/mlx5: Support for communicating with mlx5 fw
fwctl: Add documentation
fwctl: FWCTL_RPC to execute a Remote Procedure Call to device firmware
taint: Add TAINT_FWCTL
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove legacy compression interface
- Improve scatterwalk API
- Add request chaining to ahash and acomp
- Add virtual address support to ahash and acomp
- Add folio support to acomp
- Remove NULL dst support from acomp
Algorithms:
- Library options are fuly hidden (selected by kernel users only)
- Add Kerberos5 algorithms
- Add VAES-based ctr(aes) on x86
- Ensure LZO respects output buffer length on compression
- Remove obsolete SIMD fallback code path from arm/ghash-ce
Drivers:
- Add support for PCI device 0x1134 in ccp
- Add support for rk3588's standalone TRNG in rockchip
- Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93
- Fix bugs in tegra uncovered by multi-threaded self-test
- Fix corner cases in hisilicon/sec2
Others:
- Add SG_MITER_LOCAL to sg miter
- Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp"
* tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (187 commits)
crypto: testmgr - Add multibuffer acomp testing
crypto: acomp - Fix synchronous acomp chaining fallback
crypto: testmgr - Add multibuffer hash testing
crypto: hash - Fix synchronous ahash chaining fallback
crypto: arm/ghash-ce - Remove SIMD fallback code path
crypto: essiv - Replace memcpy() + NUL-termination with strscpy()
crypto: api - Call crypto_alg_put in crypto_unregister_alg
crypto: scompress - Fix incorrect stream freeing
crypto: lib/chacha - remove unused arch-specific init support
crypto: remove obsolete 'comp' compression API
crypto: compress_null - drop obsolete 'comp' implementation
crypto: cavium/zip - drop obsolete 'comp' implementation
crypto: zstd - drop obsolete 'comp' implementation
crypto: lzo - drop obsolete 'comp' implementation
crypto: lzo-rle - drop obsolete 'comp' implementation
crypto: lz4hc - drop obsolete 'comp' implementation
crypto: lz4 - drop obsolete 'comp' implementation
crypto: deflate - drop obsolete 'comp' implementation
crypto: 842 - drop obsolete 'comp' implementation
crypto: nx - Migrate to scomp API
...
|
|
io_cmd_buf points to an array of ublksrv_io_desc structs but its type is
char *. Indexing the array requires an explicit multiplication and cast.
The compiler also can't check the pointer types.
Change io_cmd_buf's type to struct ublksrv_io_desc * so it can be
indexed directly and the compiler can type-check the code.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250328194230.2726862-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
|
|
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"This includes a major refactoring of the fbcon packed pixel drawing
routines, contributed by Zsolt Kajtar. The original version duplicated
more or less the same algorithms for both system and i/o memory.
The new implementation is more robust, both implementations are now
feature complete (e.g. pixel order reversing now supported by both),
behaves the same way as it uses the identical code for both variants
and adds support for foreign endian framebuffers.
The other patches add some parameter checks, static attribute groups
for sysfs entries and console fixes:
- dummycon: only build module if there are users and fix rows/cols
(Arnd Bergmann)
- mdacon: rework dependency list (Arnd Bergmann)
- lcdcfb, fsl-diu-fb, fbcon: Fix registering and removing of sysfs
(Shixiong Ou)
- sm501fb: Add some geometry checks (Danila Chernetsov)
- omapfb: Remove unused code, add value checks (Leonid Arapov)
- au1100fb: Clean up variable assignment (Markus Elfring)
- pxafb: use devm_kmemdup*() (Raag Jadav)"
* tag 'fbdev-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: fsl-diu-fb: add missing device_remove_file()
fbcon: Use static attribute groups for sysfs entries
fbdev: sm501fb: Add some geometry checks.
fbdev: omapfb: Add 'plane' value check
fbdev: omapfb: Remove writeback deadcode
MAINTAINERS: Add contact info for fbdev packed pixel drawing
fbdev: Refactoring the fbcon packed pixel drawing routines
fbdev: wmt_ge_rops: Remove fb_draw.h includes
fbdev: mach64_cursor: Remove fb_draw.h includes
fbdev: Register sysfs groups through device_add_group
fbdev: lcdcfb: Register sysfs groups through driver core
mdacon: rework dependency list
dummycon: fix default rows/cols
dummycon: only build module if there are users
fbdev: au1100fb: Move a variable assignment behind a null pointer check
fbdev: pxafb: use devm_kmemdup*()
fbcon: Use correct erase colour for clearing in fbcon
fbdev: core: tileblit: Implement missing margin clearing for tileblit
|
|
Pass struct request *rq to ublk_cmd_tw_cb() through ublk_uring_cmd_pdu,
mirroring how it works for ublk_cmd_list_tw_cb(). This saves some
pointer dereferences, as well as the bounds check in blk_mq_tag_to_rq().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250328180411.2696494-6-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_queue_cmd_list() loads io->cmd twice. The intervening stores
prevent the compiler from combining the loads. Since struct ublk_io *io
is only used to compute io->cmd, replace the variable with io->cmd.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250328180411.2696494-5-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Save a few pointer dereferences by obtaining struct ublk_queue *ubq from
the ublk_uring_cmd_pdu instead of the request's mq_hctx.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250328180411.2696494-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_cmd_list_tw_cb() is always performed on a non-empty request list.
So don't check whether rq is NULL on the first iteration of the loop,
just on subsequent iterations.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250328180411.2696494-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_dispatch_req() never uses its struct io_uring_cmd *cmd argument.
Drop it so callers don't have to pass a value.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250328180411.2696494-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The new name is aligned with ublk_cmd_list_tw_cb(), and looks
more readable.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement ->queue_rqs() for improving perf in case of MQ.
In this way, we just need to call io_uring_cmd_complete_in_task() once for
whole IO batch, then both io_uring and ublk server can get exact batch from
ublk frontend.
Follows IOPS improvement:
- tests
tools/testing/selftests/ublk/kublk add -t null -q 2 [-z]
fio/t/io_uring -p0 /dev/ublkb0
- results:
more than 10% IOPS boost observed
Pass all ublk selftests, especially the io dispatch order test.
Cc: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IO split is usually bad in io_uring world, since -EAGAIN is caused and
IO handling may have to fallback to io-wq, this way does hurt performance.
ublk starts to support zero copy recently, for avoiding unnecessary IO
split, ublk driver's segment limit should be aligned with backend
device's segment limit.
Another reason is that io_buffer_register_bvec() needs to allocate bvecs,
which number is aligned with ublk request segment number, so that big
memory allocation can be avoided by setting reasonable max_segments limit.
So add segment parameter for providing ublk server chance to align
segment limit with backend, and keep it reasonable from implementation
viewpoint.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Call io_uring_cmd_to_pdu() to get uring_cmd pdu, and one big benefit
is the automatic pdu size build check.
Suggested-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250327095123.179113-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_need_map_io() is more readable.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove two unused fields(`io_addr` & `max_io_sz`) from `struct ublk_queue`.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In ublk_queue_rq(), ubq->canceling has to be handled after ->fail_io and
->force_abort are dealt with, otherwise the request may not be failed
when deleting disk.
Add comment on this usage.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now ublk driver depends on `ubq->canceling` for deciding if the request
can be dispatched via uring_cmd & io_uring_cmd_complete_in_task().
Once ubq->canceling is set, the uring_cmd can be done via ublk_cancel_cmd()
and io_uring_cmd_done().
So set ubq->canceling when queue is frozen, this way makes sure that the
flag can be observed from ublk_queue_rq() reliably, and avoids
use-after-free on uring_cmd.
Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This contains a new driver: a TPM FF-A driver.
FF comes from Firmware Framework, and A comes from Arm's A-profile.
FF-A is essentially a standard mechanism to communicate with TrustZone
apps such as TPM.
Other than that, this includes a pile of fixes and small improvments"
* tag 'tpmdd-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Make chip->{status,cancel,req_canceled} opt
MAINTAINERS: TPM DEVICE DRIVER: add missing includes
tpm: End any active auth session before shutdown
Documentation: tpm: Add documentation for the CRB FF-A interface
tpm_crb: Add support for the ARM FF-A start method
ACPICA: Add start method for ARM FF-A
tpm_crb: Clean-up and refactor check for idle support
tpm_crb: ffa_tpm: Implement driver compliant to CRB over FF-A
tpm/tpm_ftpm_tee: fix struct ftpm_tee_private documentation
tpm, tpm_tis: Workaround failed command reception on Infineon devices
tpm, tpm_tis: Fix timeout handling when waiting for TPM status
tpm: Convert warn to dbg in tpm2_start_auth_session()
tpm: Lazily flush auth session when getting random data
tpm: ftpm_tee: remove incorrect of_match_ptr annotation
tpm: do not start chip while suspended
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"
This reverts commit 36f5f026df6c1cd8a20373adc4388d2b3401ce91, reversing
changes made to 43a7eec035a5b64546c8adefdc9cf96a116da14b.
Thomas says:
"I just noticed that for some incomprehensible reason, probably sheer
incompetemce when trying to utilize b4, I managed to merge an outdated
_and_ buggy version of that series.
Can you please revert that merge completely?"
Done.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's a possible race condition in dm-ebs - dm bufio prefetch may be in
progress while the device is suspended. Fix this by calling
dm_bufio_client_reset in the postsuspend hook.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
There's a possible race condition in dm-verity - the prefetch work item
may race with suspend and it is possible that prefetch continues to run
while the device is suspended. Fix this by calling flush_workqueue and
dm_bufio_client_reset in the postsuspend hook.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
When using dm-integrity in standalone mode with a keyed hmac algorithm,
integrity tags are calculated and verified internally.
Using plain memcmp to compare the stored and computed tags may leak the
position of the first byte mismatch through side-channel analysis,
allowing to brute-force expected tags in linear time (e.g., by counting
single-stepping interrupts in confidential virtual machine environments).
Co-developed-by: Luca Wilke <work@luca-wilke.com>
Signed-off-by: Luca Wilke <work@luca-wilke.com>
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
Check if the pasid has been attached before going further in the detach
path. This fixes a crash found by syzkaller. Add a selftest as well.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 668 Comm: repro Not tainted 6.14.0-next-20250325-eb4bc4b07f66 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org4
RIP: 0010:iommufd_hw_pagetable_detach+0x8a/0x4d0
Code: 00 00 00 44 89 ee 48 89 c7 48 89 75 c8 48 89 45 c0 e8 ca 55 17 02 48 89 c2 49 89 c4 48 b8 00 00 00b
RSP: 0018:ffff888021b17b78 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff888014b5a000 RCX: ffff888021b17a64
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88801dad07fc
RBP: ffff888021b17bc8 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: ffff88801dad0e58 R12: 0000000000000000
R13: 0000000000000001 R14: ffff888021b17e18 R15: ffff8880132d3008
FS: 00007fca52013600(0000) GS:ffff8880e3684000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200006c0 CR3: 00000000112d0005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
iommufd_device_detach+0x2a/0x2e0
iommufd_test+0x2f99/0x5cd0
iommufd_fops_ioctl+0x38e/0x520
__x64_sys_ioctl+0x1ba/0x220
x64_sys_call+0x122e/0x2150
do_syscall_64+0x6d/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Link: https://patch.msgid.link/r/20250328133448.22052-1-yi.l.liu@intel.com
Reported-by: Lai Yi <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/linux-iommu/Z+X0tzxhiaupJT7b@ly-workstation
Fixes: c0e301b2978d ("iommufd/device: Add pasid_attach array to track per-PASID attach")
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The following commit:
0b0d81e3b733 ("objtool, drm/vmwgfx: Fix "duplicate frame pointer save" warning")
... marked vmw_send_msg() STACK_FRAME_NON_STANDARD because it uses RBP
in a non-standard way which violates frame pointer convention.
That issue only affects the frame pointer unwinder. Remove the
annotation for ORC.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/eff3102a7eeb77b4420fcb5e9d9cd9dd81d4514a.1743136205.git.jpoimboe@kernel.org
|
|
If execute_location()'s memcpy of do_nothing() gets inlined and unrolled
by the compiler, it copies one word at a time:
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x1374
mov %rax,0x38(%rbx)
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x136c
mov %rax,0x30(%rbx)
...
Those .text references point to the middle of the function, causing
objtool to complain about their lack of ENDBR.
Prevent that by resolving the function pointer at runtime rather than
build time. This fixes the following warning:
drivers/misc/lkdtm/lkdtm.o: warning: objtool: execute_location+0x23: relocation to !ENDBR: .text+0x1378
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/30b9abffbddeb43c4f6320b1270fa9b4d74c54ed.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503191453.uFfxQy5R-lkp@intel.com/
|
|
Bare unreachable() should be avoided as it generates undefined behavior,
e.g. falling through to the next function. Use BUG() instead so the
error is defined.
Fixes the following warnings:
drivers/iommu/dma-iommu.o: warning: objtool: iommu_dma_sw_msi+0x92: can't find jump dest instruction at .text+0x54d5
vmlinux.o: warning: objtool: iommu_dma_get_msi_page() falls through to next function __iommu_dma_unmap()
Link: https://patch.msgid.link/r/0c801ae017ec078cacd39f8f0898fc7780535f85.1743053325.git.jpoimboe@kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/314f8809-cd59-479b-97d7-49356bf1c8d1@infradead.org
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Closes: https://lore.kernel.org/5dd1f35e-8ece-43b7-ad6d-86d02d2718f6@paulmck-laptop
Fixes: 6aa63a4ec947 ("iommu: Sort out domain user data")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
iommufd_veventq_fops_read() decrements veventq->num_events when a vevent
is read out. However, the report path ony increments veventq->num_events
for normal events. To be balanced, make the read path decrement num_events
only for normal vevents.
Fixes: e36ba5ab808e ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/20250324120034.5940-3-yi.l.liu@intel.com
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The vevent->header.flags is not initialized per allocation, hence the
vevent read path may treat the vevent as lost_events_header wrongly.
Use kzalloc() to alloc memory for new vevent.
Fixes: e8e1ef9b77a7 ("iommufd/viommu: Add iommufd_viommu_report_event helper")
Link: https://patch.msgid.link/r/20250324120034.5940-2-yi.l.liu@intel.com
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
PASID usage requires PASID support in both device and IOMMU. Since the
iommu drivers always enable the PASID capability for the device if it
is supported, this extends the IOMMU_GET_HW_INFO to report the PASID
capability to userspace. Also, enhances the selftest accordingly.
Link: https://patch.msgid.link/r/20250321180143.8468-5-yi.l.liu@intel.com
Cc: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org> #aarch64 platform
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
commit 8a7d12d674ac ("net: usb: usbnet: fix name regression") assumed
that local addresses always came from the kernel, but some devices hand
out local mac addresses so we ended up with point-to-point devices with
a mac set by the driver, renaming to eth%d when they used to be named
usb%d.
Userspace should not rely on device name, but for the sake of stability
restore the local mac address check portion of the naming exception:
point to point devices which either have no mac set by the driver or
have a local mac handed out by the driver will keep the usb%d name.
(some USB LTE modems are known to hand out a stable mac from the locally
administered range; that mac appears to be random (different for
mulitple devices) and can be reset with device-specific commands, so
while such devices would benefit from getting a OUI reserved, we have
to deal with these and might as well preserve the existing behavior
to avoid breaking fragile openwrt configurations and such on upgrade.)
Link: https://lkml.kernel.org/r/20241203130457.904325-1-asmadeus@codewreck.org
Fixes: 8a7d12d674ac ("net: usb: usbnet: fix name regression")
Cc: stable@vger.kernel.org
Tested-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250326-usbnet_rename-v2-1-57eb21fcff26@atmark-techno.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When hw-gro is enabled, the maximum number of header entries that are
needed per wqe (hd_per_wqe) is calculated based on the size of the
reservations among other parameters.
Miscalculation of the size of reservations leads to incorrect
calculation of hd_per_wqe as 0, particularly in the case of large page
size like in aarch64, this prevents the SHAMPO header from being
correctly initialized in the device, ultimately causing the following
cqe err that indicates a violation of PD.
mlx5_core 0000:00:08.0 eth2: ERR CQE on RQ: 0x1180
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x510, ci 0x0, qn 0x1180, opcode 0xe, syndrome 0x4, vendor syndrome 0x32
00000000: 00 00 00 00 04 4a 00 00 00 00 00 00 20 00 93 32
00000010: 55 00 00 00 fb cc 00 00 00 00 00 00 07 18 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a
00000030: 00 00 00 9a 93 00 32 04 00 00 00 00 00 00 da e1
Use the correct formula for calculating the size of reservations,
precisely it shouldn't be dependent on page size, instead use the
correct multiply of MLX5E_SHAMPO_WQ_BASE_RESRV_SIZE.
Fixes: e5ca8fb08ab2 ("net/mlx5e: Add control path for SHAMPO feature")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742732906-166564-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Frag allocators, such as netdev_alloc_frag(), were not designed to
work for fragsz > PAGE_SIZE.
So, switch to page pool for jumbo frames instead of using page frag
allocators. This driver is using page pool for smaller MTUs already.
Cc: stable@vger.kernel.org
Fixes: 80f6215b450e ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/1742920357-27263-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Calling verity_verify_io in bh for IO of all sizes is not suitable for
embedded devices. From our tests, it can improve the performance of 4K
synchronise random reads.
For example:
./fio --name=rand_read --ioengine=psync --rw=randread --bs=4K \
--direct=1 --numjobs=8 --runtime=60 --time_based --group_reporting \
--filename=/dev/block/mapper/xx-verity
But it will degrade the performance of 512K synchronise sequential reads
on our devices.
For example:
./fio --name=read --ioengine=psync --rw=read --bs=512K --direct=1 \
--numjobs=8 --runtime=60 --time_based --group_reporting \
--filename=/dev/block/mapper/xx-verity
A parameter array is introduced by this change. And users can modify the
default config by /sys/module/dm_verity/parameters/use_bh_bytes.
The default limits for NONE/RT/BE is set to 8192.
The default limits for IDLE is set to 0.
Call verity_verify_io directly when verity_end_io is not in hardirq.
Signed-off-by: LongPing Wei <weilongping@oppo.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- New option "printk.debug_non_panic_cpus" allows to store printk
messages from non-panic CPUs during panic. It might be useful when
panic() fails. It is disabled by default because it increases the
chance to see the messages printed before panic() and on the
panic-CPU.
- New build option "CONFIG_NULL_TTY_DEFAULT_CONSOLE" allows to build
kernel without the virtual terminal support which prefers ttynull
over serial console.
- Do not unblank suspended consoles.
- Some code clean up.
* tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/panic: Add option to allow non-panic CPUs to write to the ring buffer.
printk: Add an option to allow ttynull to be a default console device
printk: Check CON_SUSPEND when unblanking a console
printk: Rename console_start to console_resume
printk: Rename console_stop to console_suspend
printk: Rename resume_console to console_resume_all
printk: Rename suspend_console to console_suspend_all
|
|
Choices aggregates passed to _aggregate_choices() are already filled
with ones, therefore we can avoid copying a new bitmap on the first
iteration.
This makes setting the PLATFORM_PROFILE_LAST bit on aggregates
unnecessary, so drop it as well.
While at it, add a couple empty lines to improve style.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20250325-pprof-opt-v2-1-736291e6e66b@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Depending on the secureboot signature on EFI\BOOT\BOOTX86.EFI the
Lenovo Yoga Tab 3 UEFI will switch its OSID ACPI variable between
1 (Windows) and 4 (Android(GMIN)).
In Windows mode a GPIO event handler gets installed for GPO1 pin 5,
causing Linux' x86-android-tables code which deals with the general
brokenness of this device's ACPI tables to fail to probe with:
[ 17.853705] x86_android_tablets: error -16 getting GPIO INT33FF:01 5
[ 17.859623] x86_android_tablets x86_android_tablets: probe with driver
which renders sound, the touchscreen, charging-management,
battery-monitoring and more non functional.
Add ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS to the existing quirks for this
device to fix this.
Reported-by: Agoston Lorincz <pipacsba@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAMEzqD+DNXrAvUOHviB2O2bjtcbmo3xH=kunKr4nubuMLbb_0A@mail.gmail.com/
Cc: All applicable <stable@kernel.org>
Fixes: fe820db35275 ("ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20250325210450.358506-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like the ASUS Vivobook X1504VAP and Vivobook X1704VAP, the ASUS Vivobook 14
X1404VAP has its keyboard IRQ (1) described as ActiveLow in the DSDT, which
the kernel overrides to EdgeHigh breaking the keyboard.
$ sudo dmidecode
[…]
System Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: ASUS Vivobook 14 X1404VAP_X1404VA
[…]
$ grep -A 30 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
Add the X1404VAP to the irq1_level_low_skip_override[] quirk table to fix
this.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Anton Shyndin <mrcold.il@gmail.com>
Link: https://patch.msgid.link/20250318160903.77107-1-pmenzel@molgen.mpg.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Intel Over-Clocking Watchdogs are described in ACPI tables by both the
generic PNP0C02 _CID and their ACPI _HID. The presence of the _CID then
causes the PNP scan handler to attach to the watchdog, preventing the
actual watchdog driver from binding. Address this by adding the ACPI
_HIDs to the list of non-PNP devices, so that the PNP scan handler is
bypassed.
Note that these watchdogs can be described by multiple _HIDs for what
seems to be identical hardware. This commit is not a complete list of
all the possible watchdog ACPI _HIDs.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Link: https://patch.msgid.link/20250317-ivo-intel_oc_wdt-v3-2-32c396f4eefd@siemens.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
