| Age | Commit message (Collapse) | Author |
|---|
|
Remove the system error worker thread and instead have the
execution environment worker handle that transition to serialize
processing and avoid any possible race conditions during
shutdown.
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While writing any sequence or session identifiers, it is possible that
the host could write a zero value, whereas only non-zero values should
be supported writes to those registers. Ensure that the host does not
write a non-zero value for them and also log them in debug messages. A
macro is introduced to simplify this check and the existing checks are
also converted to use this macro.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add log messages to track boot flow errors and timeouts in SBL or AMSS
firmware loading to aid in debug.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When loading AMSS firmware using BHIe protocol, return -ETIMEDOUT if no
response is received within the timeout or return -EIO in case of a
protocol returned failure or an MHI error state.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Upon power up, driver queues firmware worker thread if the execution
environment is PBL. Firmware worker is blocked with a timeout until
state worker gets a chance to run and unblock firmware worker. An
endpoint power up failure can be seen if state worker gets a chance to
run after firmware worker has timed out. Remove this dependency and
handle firmware load directly using state worker thread.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When MHI Driver receives an EOT event, it reads xfer_len from the
event in the last TRE. The value is under control of the MHI device
and never validated by Host MHI driver. The value should never be
larger than the real size of the buffer but a malicious device can
set the value 0xFFFF as maximum. This causes driver to memory
overflow (both read or write). Fix this issue by reading minimum of
transfer length from event and the buffer length provided.
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MHI data completion handler function reads channel id from event
ring element. Value is under the control of MHI devices and can be
any value between 0 and 255. In order to prevent out of bound access
add a bound check against the max channel supported by controller
and skip processing of that event ring element.
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver is using zero initialized intmod value from mhi channel when
configuring TRE for bei field. This prevents interrupt moderation to
take effect in case it is supported by an event ring. Fix this by
copying intmod value from associated event ring to mhi channel upon
registering mhi controller.
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move all the common code to generate TRE from mhi_queue_buf,
mhi_queue_dma and mhi_queue_skb to mhi_gen_tre. This helps
to centralize the TRE generation code which makes any future
bug fixing easier to manage in these APIs.
Suggested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next
Kishon writes:
phy: for 5.8
*) Add new PHY driver to support Cadence SALVO PHY which supports USB3 & USB2
*) Add new PHY driver to support Intel ComboPhy which supports PCIe, SATA and
EMAC
*) Add new PHY driver for Qualcomm IPQ40xx USB PHY
*) Add new PHY driver for Synopsys FemtoPHY V2 driver used in Qualcomm SOCs
*) Add support for Qualcomm SM8250 UFS PHY and SM8150 QMP USB3 PHY in
qcom-qmp-phy driver
*) Add support for Amlogic USB2 PHY on Meson8m2 in phy-meson8b-usb2 driver
*) Add DisplayPort mode support in Wiz (TI Cadence PHY wrapper), to enable eDP
in TI's J721E SoC
*) Add support for super speed USB PHY in TI's AM654 SoC
*) Add fix in Broadcom Stingray USB PHY to get USB PHY PLL lock reliably
*) Add fix in Samsung phy-s5pv210-usb2 to get USB working on s5pv210
*) Add fix in Amlogic phy-meson8b-usb2 to get host only mode working on Meson8
*) Add fix in Cadence phy-cadence-sierra to get USB3 device disconnect issue
*) Convert meson8b-usb2-phy, qcom-qmp-phy, rcar-gen3-phy-usb2 and
rcar-gen3-phy-usb3 device tree binding to YAML schema
*) Minor fixes and cleanups in phy-cpcap-usb, j721e-wiz, omap-usb2,
phy-bcm-sr-usb, phy-brcm-usb PHY driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
phy: intel: Add driver support for ComboPhy
dt-bindings: phy: Add YAML schemas for Intel ComboPhy
dt-bindings: phy: Add PHY_TYPE_XPCS definition
phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7180
dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY
dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml
phy: cadence: sierra: Fix for USB3 U1/U2 state
phy: ti: am654: add support for USB super-speed
phy: ti: am654: show up in regmap debugfs
drivers: phy: sr-usb: do not use internal fsm for USB2 phy init
dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
phy: qcom-qmp: Ensure register indirection arrays initialized
phy: omap-usb2: Clean up exported header
phy: phy-bcm-ns2-usbdrd: Constify phy_ops
phy: phy-brcm-usb: Constify static structs
phy: sr-usb: Constify phy_ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for v5.8-rc1
This contains sdw_master_device patches and other updates done by Intel
folks.
Details:
- sdw_master_device to represent the master instances.
- sysfs properties for sdw_master_device and sdw_slave.
- Documentation update for TDM modes.
- some code cleanup patches and odd updates.
* tag 'soundwire-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel: use a single module
soundwire: fix spelling mistake
soundwire: fix trailing line in sysfs_slave.c
soundwire: add Slave sysfs support
soundwire: master: add sysfs support
soundwire: disco: s/ch/channels/
soundwire: master: add runtime pm support
soundwire: bus_type: add sdw_master_device support
soundwire: bus: add unique bus id
soundwire: bus_type: introduce sdw_slave_type and sdw_master_type
soundwire: bus: rename sdw_bus_master_add/delete, add arguments
soundwire: intel: (cosmetic) remove multiple superfluous "else" statements
soundwire: (cosmetic) remove multiple superfluous "else" statements
soundwire: qcom: Use IRQF_ONESHOT
soundwire: bus: reduce verbosity on enumeration
soundwire: debugfs: clarify SDPX license with GPL-2.0-only
soundwire: slave: don't init debugfs on device registration error
Documentation: SoundWire: clarify TDM mode support
soundwire: qcom: fix error handling in probe
soundwire: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer
|
|
into char-misc-next
Georgi writes:
interconnect changes for 5.8
These are the interconnect changes for the 5.8-rc1 merge window:
Core changes:
- Convert the framework core from tristate to bool to make handling
dependencies between other core frameworks easier
- Add of_icc_get_by_index()
- Add devm_of_icc_get() helper function
- Add icc_enable() and icc_disable() helpers
New drivers:
- Platform driver for NXP i.MX8MM SoC
- Platform driver for NXP i.MX8MN SoC
- Platform driver for NXP i.MX8MQ SoC
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: Remove unused module exit code from core
interconnect: Disallow interconnect core to be built as a module
interconnect: Add of_icc_get_by_index() helper function
interconnect: Add helpers for enabling/disabling a path
interconnect: imx: Fix return value check in imx_icc_node_init_qos()
interconnect: imx: Add platform driver for imx8mn
interconnect: imx: Add platform driver for imx8mq
interconnect: imx: Add platform driver for imx8mm
interconnect: Add imx core driver
dt-bindings: interconnect: Add bindings for imx8m noc
interconnect: Add devm_of_icc_get() as exported API for users
|
|
To make the function easier to identify as being part of the ice driver,
prepend ice to the function name.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Self-explanatory.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The variable status cannot be zero due to a prior check of it; remove this
check.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The else conditional expression is always true due to the if conditional
expression; remove it and add a comment to make it obvious still.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In function ice_set_mac_address, we will remove old dev_addr before
adding the new MAC. In the removing and adding process of the MAC,
there is no need to return error if the check finds the to-be-removed
dev_addr does not exist in the MAC filter list or the to-be-added mac
already exists, keep going or return success accordingly.
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Move filter functions to separate file.
Add functions that prepare suitable ice_fltr_info struct
depending on the filter type and add this struct to earlier created
list:
- ice_fltr_add_mac_to_list
- ice_fltr_add_vlan_to_list
- ice_fltr_add_eth_to_list
This functions are used in adding and removing filters.
Create wrappers for functions mentioned above that alloc list,
add suitable ice_fltr_info to it and call add or remove function.
- ice_fltr_prepare_mac
- ice_fltr_prepare_mac_and_broadcast
- ice_fltr_prepare_vlan
- ice_fltr_prepare_eth
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Memory allocated in the ice_add_prof_id_vsig() function wasn't being
properly freed if an error occurred inside the for-loop in the function.
In particular, 'p' wasn't being freed if an error occurred before it was
added to the resource list at the end of the for-loop.
Signed-off-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The vf_id variable is dealt with in the code in inconsistent
ways of sign usage, preventing compilation with -Werror=sign-compare.
Fix this problem in the code by always treating vf_id as unsigned, since
there are no valid values of vf_id that are negative.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Change min() macros to min_t() which has compare type specified and it
helps avoid precision loss.
In some cases there was precision loss during calls or assignments.
Some fields in structs were unnecessarily large and gave multiple
warnings.
There were also some minor type differences which are now fixed as well as
some cases where a simple cast was needed.
Callers were were passing data that is a u16 to
ice_sched_cfg_node_bw_alloc() but the function was truncating that to a u8.
Fix that by changing the function to take a u16.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When printing the ice status or AQ error codes, instead of printing out the
numerical value, provide the description of the error code. This provides
more info about the issue than a number.
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
As soon as the driver registers the PF netdev, userspace utilities
like NetworkManager try to bring up the associated interface. When
this happens, the driver may not have finished initializing fully,
resulting in a bunch of errors in the interface up flow.
The driver already has a mechanism to indicate if it's not up yet;
by setting the __ICE_DOWN bit in pf->state, but this bit gets
cleared too early in the current flow. So clear this bit only when
the driver is fully up. Also check for the same bit in the ice_open
flow, and return -EBUSY if the bit is set.
Also in ice_open, replace references of vsi->back with a local
variable.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently, the ice driver is setting a PHY configuration,
which causes a link drop, and then additionally it calls
for a nway_reset, which restarts auto-negotiation on the
link, which also causes a link drop. These two link
events in such close timing is causing the FW to not be
able to generate a link interrupt for the driver to
respond to.
Remove the unnecessary auto-negotiation restart from the
set pauseparams flow. Also remove error path that
would have performed an ice_down/ice_up as that is
also unnecessary.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The current implementation for contiguous TC check
is assuming that the UPs will be mapped to TCs in
a linear progressing fashion. This is obviously
not always true.
Change the check to allow for various UP2TC mapping
configurations.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When there's a Tx timeout for a queue which belongs to a PFC enabled TC,
then it's not because the queue is hung but because PFC is in action.
In PFC, peer sends a pause frame for a specified period of time when its
buffer threshold is exceeded (due to congestion). Netdev on the other
hand checks if ACK is received within a specified time for a TX packet, if
not, it'll invoke the tx_timeout routine.
Signed-off-by: Avinash JD <avinash.dayanand@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Implement promiscuous support for VF VSIs. Behaviour of promiscuous support
is based on VF trust as well as the, introduced, vf-true-promisc flag.
A trusted VF with vf-true-promisc disabled will be the default VSI, which
means that all traffic without a matching destination MAC address in the
device's internal switch will be forwarded to this VF VSI.
A trusted VF with vf-true-promisc enabled will go into "true promiscuous
mode". This amounts to the VF receiving all ingress and egress traffic
that hits the device's internal switch.
An untrusted VF will only receive traffic destined for that VF.
The vf-true-promisc-support flag cannot be toggled while any VF is in
promiscuous mode. This flag should be set prior to loading the iavf driver
or spawning VF(s).
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Create a boost TCAM entry for each tunnel port in order to get a tunnel
PTYPE. Update netdev feature flags and implement the appropriate logic to
get and set values for hardware offloads.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The flash memory for the ice hardware contains a block of information
used for link management called the Netlist module.
As this essentially represents another section of firmware, add its
version information to the output of the driver's .info_get handler.
This includes both a version and the first few bytes of a hash of the
module contents.
fw.netlist -> the version information extracted from the netlist module
fw.netlist.build-> first 4 bytes of the hash of the contents, similar
to fw.mgmt.build
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
- HD audio fixes on recent systems
- vGPU detection (fail probe if we're on one, for now)
- Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
- SVM improvements/fixes
- NVIDIA format modifier support
- Misc other fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv6DcRFMDVEftdL7LxNtxuSQQ=qnfqdHXO0K=BmJ8Q2-+g@mail.gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.8
This include dpi pin mode swap, config mipi_tx current and impedance,
and some fixup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521014612.17175-1-chunkuang.hu@kernel.org
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
When calling OpenCL clEnqueueSVMMigrateMem() on a region of memory that
is backed by pte_none() or zero pages, migrate_vma_setup() will fill the
source PFN array with an entry indicating the source page is zero.
Use this to optimize migration to device private memory by allocating
GPU memory and zero filling it instead of failing to migrate the page.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
In nouveau_dmem_init(), a number of struct nouveau_dmem_chunk are allocated
and put on the dmem->chunk_empty list. Then in nouveau_dmem_pages_alloc(),
a nouveau_dmem_chunk is removed from the list and GPU memory is allocated.
However, the nouveau_dmem_chunk is never removed from the chunk_empty
list nor placed on the chunk_free or chunk_full lists. This results
in only one chunk ever being actually used (2MB) and quickly leads to
migration to device private memory failures.
Fix this by having just one list of free device private pages and if no
pages are free, allocate a chunk of device private pages and GPU memory.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Currently, the nv50_mstc_mode_valid() function is happy to take any and
all modes, even the ones we can't actually support sometimes like
interlaced modes.
Luckily, the only difference between the mode validation that needs to
be performed for MST vs. SST is that eventually we'll need to check the
minimum PBN against the MSTB's full PBN capabilities (remember-we don't
care about the current bw state here). Otherwise, all of the other code
can be shared.
So, we move all of the common mode validation in
nouveau_connector_mode_valid() into a separate helper,
nv50_dp_mode_valid(), and use that from both nv50_mstc_mode_valid() and
nouveau_connector_mode_valid(). Note that we allow for returning the
calculated clock that nv50_dp_mode_valid() came up with, since we'll
eventually want to use that for PBN calculation in
nv50_mstc_mode_valid().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This just limits the BPC for MST connectors to a maximum of 8 from
nv50_mstc_get_modes(), instead of doing so during
nv50_msto_atomic_check(). This doesn't introduce any functional changes
yet (other then userspace now lying about the max bpc, but we can't
support that yet anyway so meh). But, we'll need this in a moment so
that we can share mode validation between SST and MST which will fix
some real world issues.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
We advertise being able to set interlaced modes, so let's actually make
sure to do that. Otherwise, we'll end up hanging the display engine due
to trying to set a mode with timings adjusted for interlacing without
telling the hardware it's actually an interlaced mode.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Right now, we make the mistake of allowing interlacing on all
connectors. Nvidia hardware does not always support interlacing with DP
though, so we need to make sure that we don't allow interlaced modes to
be set in such situations as otherwise we'll end up accidentally hanging
the display HW.
This fixes some hangs with Turing, which would be caused by attempting
to set an interlaced mode on hardware that doesn't support it. This
patch likely fixes other hardware hanging in the same way as well.
Note that we say we probe PIOR caps, but they don't actually have any
interlacing caps. So, the get_caps() function for PIORs just sets
interlacing support to true.
Changes since v1:
* Actually probe caps correctly this time, both on EVO and NVDisplay.
Changes since v2:
* Fix probing for < GF119
* Use vfunc table, in prep for adding more caps in the future.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
We'll need the core channel initialized and ready by the time that we
start creating modesetting objects, so that we can call the
NV507D_GET_CAPABILITIES method to make the hardware expose it's
modesetting capabilities for later probing.
So, when loading the driver prepare the core channel from within
nouveau_display_create(). Everywhere else, we initialize the core
channel during resume.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Register has moved on GV100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
We're going to use the bound head to select HDA device entry.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Since the commit 742db30c4ee6 ("drm/nouveau: Add HD-audio component
notifier support"), the nouveau driver notifies and pokes the HD-audio
HPD and ELD via audio component, but this seems broken. The culprit
is the naive assumption that crtc->index corresponds to the HDA pin.
Actually this rather corresponds to the MST dev_id (alias "pipe" in
the audio component framework) while the actual port number is given
from the output ior id number.
This patch corrects the assignment of port and dev_id arguments in the
audio component ops to recover from the HDMI/DP audio regression.
Fixes: 742db30c4ee6 ("drm/nouveau: Add HD-audio component notifier support")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Using ENODEV as this prevents probe failed errors in dmesg.
v2: move check further down
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
