summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-15drm/amd/amdgpu: enable ASPM on navi1xKenneth Feng
enable ASPM on navi1x for the benifit of system power consumption without performance hurt. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/sriov no need to config GECC for sriovJack Zhang
No need to config GECC feature here for sriov Leave the host drvier to do the configuration job. Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/pm: Show updated clocks on aldebaranLijo Lazar
When GFXCLK range is updated in manual/determinism mode, show the updated min/max clock range. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: Fix kernel-doc for the RAS sysfs interfaceLuben Tuikov
Imporve the kernel-doc for the RAS sysfs interface. Fix the grammar, fix the context. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: Add bad_page_cnt_threshold to debugfsLuben Tuikov
Add bad_page_cnt_threshold to debugfs, an optional file system used for debugging, for reporting purposes only--it usually matches the size of EEPROM but may be different depending on the "bad_page_threshold" kernel module option. The "bad_page_cnt_threshold" is a dynamically computed value. It depends on three things: the VRAM size; the size of the EEPROM (or the size allocated to the RAS table therein); and the "bad_page_threshold" module parameter. It is a dynamically computed value, when the amdgpu module is run, on which further parameters and logic depend, and as such it is helpful to see the dynamically computed value in debugfs. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: Fix a bug in checking the result of reserve pageLuben Tuikov
Fix if (ret) --> if (!ret), a bug, for "retire_page", which caused the kernel to recall the method with *pos == end of file, and that bounced back with error. On the first run, we advanced *pos, but returned 0 back to fs layer, also a bug. Fix the logic of the check of the result of amdgpu_reserve_page_direct()--it is 0 on success, and non-zero on error, not the other way around. This patch fixes this bug. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: Fix a bug for input with double sscanfLuben Tuikov
Remove double-sscanf to scan for %llu and 0x%llx, as that is not going to work! The %llu will consume the "0" in "0x" of your input, and the hex value you think you're entering will always be 0. That is, a valid hex value can never be consumed. On the other hand, just entering a hex number without leading 0x will either be scanned as a string and not match, for instance FAB123, or the leading decimal portion is scanned as the %llu, for instance 123FAB will be scanned as 123, which is not correct. Thus remove the first %llu scan and leave only the %llx scan, removing the leading 0x since %llx can scan either. Addresses are usually always hex values, so this suffices. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Xinhui Pan <xinhui.pan@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: Add graphics cache rinse packet for sdmaJinzhou Su
Add emit mem sync callback for sdma_v5_2 In amdgpu sync object test, three threads created jobs to send GFX IB and SDMA IB in sequence. After the first GFX thread joined, sometimes the third thread will reuse the same physical page to store the SDMA IB. There will be a risk that SDMA will read GFX IB in the previous physical page. So it's better to flush the cache before commit sdma IB. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: Ensure dcefclk isn't created on AldebaranKent Russell
Like Arcturus, this isn't available on Aldebaran, so remove it accordingly Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: [FW Promotion] Release 0.0.61Anthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: 3.2.131Aric Cyr
DC version 3.2.131 brings improvements in multiple areas. In summary, we highlight: -Enhancement for multiple eDP BL control. -Add debug flag to enable eDP ILR by default and debugfs to repress HPD/HPR_RX IRQ. -Fixes for DSC enable sequence,Force vsync flip,hang when psr is enabled etc. -Firmware releases: 0.0.60 0.0.61 Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Fix hangs with psr enabled on dcn3.xxRoman Li
[Why] SKIP_CRTC_DISABLE bit should be applicable to all dcn asics not only Raven. [How] Replace check for Raven only with check for all DCNs. Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Added support for multiple eDP BL controlJake Wang
[WHY & HOW] Driver currently assumes only 1 eDP is connected. Added support for multiple eDP BL control. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/pm: add support for new smu metrics table for vangoghXiaojian Du
This patch is to add support for new smu metrics table for vangogh. It will support new and legacy smu metrics table in the meanwhile. New pmfw version is 4.63.36.00, and new smu interface version is #3. v1: check smu pmfw version to determine to use new or legacy smu metrics table v2: check smu interface version to determine to use new or legacy smu metrics table v3: revise wrong symbol Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/pm: update the driver interface header for vangoghXiaojian Du
This patch is to update the driver interface header for vangogh. New version driver interface header will support new version pmfw (from version 4.63.36.00) which uses new smu metrics table. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: [FW Promotion] Release 0.0.60Anthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: wait vblank when stream enabled and update dpp clockLewis Huang
[Why] When boot into OS, seamless boot device won't blank stream. Driver update dpp clock when scanline position in vactive will show garbage on screen. [How] Wait for vblank for seamless boot edp display when driver update dpp clock. The apply seamless boot flag will be clear when OS call SetVisibility on. Therefore we only wait for vblank once after boot into OS. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Add debugfs to repress HPD and HPR_RX IRQsHarry Wentland
[Why] For debugging reasons it can be beneficial to disable any hotplug and DP shortpulse interrupt handling. [How] Expose a debugfs to set a flag to bypass HPD IRQ handling and skip IRQ handling if flag is set. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Connect clock optimization function to dcn301Mikita Lipski
[why/how] Connecting clock optimization functions to dcn301 HWSS to enable power state enter/exit optimization Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Remove unused flag from stream stateMikita Lipski
[why & how] Removing unused DSC flag which is incorrect and is not used. We are only using stream->timing.flags.DSC for DSC's current state. Stream state as an input parameter and should not contain any past status flags. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Force vsync flip when reconfiguring MPCCAnthony Wang
[Why] Underflow observed when disabling PIP overlay in-game when vsync is disabled, due to OTC master lock not working with game pipe which is immediate flip. [How] When performing a full update, override flip_immediate value to false for all planes, so that flip occurs on vsync. Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Set LTTPR mode to non-LTTPR if no repeaters foundWesley Chalmers
[WHY] If no repeaters are found, we do not need or want to attempt to link-train repeaters, as this could cause bugs. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Fix DML validation of simple vs native 422 modesNicholas Kazlauskas
[Why] We're always validating DML with simple 422 DSC even if native 422 DSC is in use. [How] Use the mode configuration from the timing. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Remove static property from decide_edp_link_settingsMichael Strauss
[Why & How] Static cleanup for eDP ILR Support. Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Fix DSC enable sequenceMike Hsieh
[Why] DSC is enabled before reset link and potentially cause DSC enable fail problem. [How] Enable DSC after link is reseted Signed-off-by: Mike Hsieh <chun-wei.hsieh@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Disable boot optimizations if ILR optimzation is requiredMichael Strauss
[Why] VBIOS currently sets the max link rate found in eDP 1.4 SUPPORTED_LINK_RATES table If eDP fastboot optimizations are enabled, the link rate remains at max after init [How] Determine optimal link rate during boot, disable seamless boot and eDP fastboot optimizations if link rate optimization is required Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Add debug flag to enable eDP ILR by defaultMichael Strauss
[Why & How] Allow per-asic enablement of ILR feature with debug flag Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15i2c: nomadik: Fix space errorsTian Tao
Fix the following checkpatch errors: ERROR: space prohibited before that ',' (ctx:WxW) #280: FILE: drivers/i2c/busses/i2c-nomadik.c:280: + i2c_clr_bit(dev->virtbase + I2C_CR , I2C_CR_PE); ^ ERROR: space prohibited before that ',' (ctx:WxW) #528: FILE: drivers/i2c/busses/i2c-nomadik.c:528: + i2c_set_bit(dev->virtbase + I2C_CR , I2C_CR_PE); ^ No functional changes. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: iop3xx: Fix coding style issuesTian Tao
Fix 20 checkpatch errors. Among these errors, 18 of them are incorrect space usage, such as: ERROR: space prohibited after that open parenthesis '(' #128: FILE: drivers/i2c/busses/i2c-iop3xx.c:128: + if ( !rc ) rc = -I2C_ERR_BERR The remaining two errors are trailing statements should be on next line, such as: ERROR: trailing statements should be on next line #128: FILE: drivers/i2c/busses/i2c-iop3xx.c:128: + if ( !rc ) rc = -I2C_ERR_BERR; No functional changes. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: amd8111: Fix coding style issuesTian Tao
Fix the following checkpatch errors: ERROR: "foo * bar" should be "foo *bar" #189: FILE: drivers/i2c/busses/i2c-amd8111.c:189: ERROR: "foo * bar" should be "foo *bar" #191: FILE: drivers/i2c/busses/i2c-amd8111.c:191: ERROR: switch and case should be at the same indent #201: FILE: drivers/i2c/busses/i2c-amd8111.c:201: ERROR: switch and case should be at the same indent #359: FILE: drivers/i2c/busses/i2c-amd8111.c:359: No functional changes. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mv64xxx: Fix random system lock caused by runtime PMMarek Behún
I noticed a weird bug with this driver on Marvell CN9130 Customer Reference Board. Sometime after boot, the system locks with the following message: [104.071363] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0 The system does not respond afterwards, only warns about RCU stalls. This first appeared with commit e5c02cf54154 ("i2c: mv64xxx: Add runtime PM support"). With further experimentation I discovered that adding a delay into mv64xxx_i2c_hw_init() fixes this issue. This function is called before every xfer, due to how runtime PM works in this driver. It seems that in order to work correctly, a delay is needed after the bus is reset in this function. Since there already is a known erratum with this controller needing a delay, I assume that this is just another place this needs to be applied. Therefore I apply the delay only if errata_delay is true. Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource()Andy Shevchenko
devm_platform_ioremap_resource() prints a message in case of error. Drop custom one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Use device_get_match_data() helperAndy Shevchenko
Use the device_get_match_data() helper instead of open coding. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Remove CONFIG_PM_SLEEP ifdefferyAndy Shevchenko
Use __maybe_unused for the suspend()/resume() hooks and get rid of the CONFIG_PM_SLEEP ifdeffery to improve the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Use devm_clk_get_optional()Andy Shevchenko
The peripheral clock is optional and we may get an -EPROBE_DEFER error code which would not be propagated correctly, fix this by using devm_clk_get_optional(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Update license and copyrightChris Packham
Use SPDX-License-Identifier and add copyright for Allied Telesis because of the reasonably large rewrite in the preceding patch. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Interrupt driven transferChris Packham
The fsl-i2c controller will generate an interrupt after every byte transferred. Make use of this interrupt to drive a state machine which allows the next part of a transfer to happen as soon as the interrupt is received. This is particularly helpful with SMBUS devices like the LM81 which will timeout if we take too long between bytes in a transfer. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15drm/amdkfd: change MTYPEs for Aldebaran's HW requirementEric Huang
Due to changes of HW memory model, we need to change Aldebaran MTYPEs to meet HW changes. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: Introduce new SETUP_TMR interfaceOak Zeng
This new interface passes both virtual and physical address to PSP. It is backward compatible with old interface. v2: use a function to simplify tmr physical address calc (Lijo) Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: Calling address translation functions to simplify codesOak Zeng
Use amdgpu_gmc_vram_pa and amdgpu_gmc_vram_cpu_pa to simplify codes. No logic change. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: Introduce functions for vram physical addr calculationOak Zeng
Add one function to calculate BO's GPU physical address. And another function to calculate BO's CPU physical address. v2: Use functions vs macros (Christian) Use more proper function names (Christian) Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: update gfx 9.4.2 ras error reportingJohn Clements
only output ras error status if an error bit is set or error counter is set Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amdgpu: update mmhub 1.7 ras error reportingJohn Clements
only output ras error status if an error bit is set Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15ubi: Remove unnecessary struct declarationWan Jiabing
struct ubi_wl_entry is defined at 178th line. The declaration here is unnecessary. Remove it. Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-15drm/amd/pm: Use VBIOS PPTable for aldebaranLijo Lazar
Keep the logic to force-use VBIOS PPTable in aldebaran rather than in generic SMU13. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15ubi: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-15Merge tag 'nand/for-5.13' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next MTD core: * Handle possible -EPROBE_DEFER from parse_mtd_partitions() NAND core: * Fix error handling in nand_prog_page_op() (x2) * Add a helper to retrieve the number of ECC bytes per step * Add a helper to retrieve the number of ECC steps * Let ECC engines advertize the exact number of steps * ECC Hamming: - Populate the public nsteps field - Use the public nsteps field * ECC BCH: - Populate the public nsteps field - Use the public nsteps field Raw NAND core: * Add support for secure regions in NAND memory * Try not to use the ECC private structures * Remove duplicate include in rawnand.h * BBT: - Skip bad blocks when searching for the BBT in NAND Raw NAND controller drivers: * Qcom: - Convert bindings to YAML - Use dma_mapping_error() for error check - Add missing nand_cleanup() in error path - Return actual error code instead of -ENODEV - Update last code word register - Add helper to configure location register - Rename parameter name in macro - Add helper to check last code word - Convert nandc to chip in Read/Write helper - Update register macro name for 0x2c offset * GPMI: - Fix a double free in gpmi_nand_init * Rockchip: - Use flexible-array member instead of zero-length array * Atmel: - Update ecc_stats.corrected counter * MXC: - Remove unneeded of_match_ptr() * R852: - replace spin_lock_irqsave by spin_lock in hard IRQ * Brcmnand: - Move to polling in pio mode on oops write - Read/write oob during EDU transfer - Fix OOB R/W with Hamming ECC * FSMC: - Fix error code in fsmc_nand_probe() * OMAP: - Use ECC information from the generic structures SPI-NAND core: * Add missing MODULE_DEVICE_TABLE() SPI-NAND drivers: * gigadevice: Support GD5F1GQ5UExxG
2021-04-15Merge tag 'spi-nor/for-5.13' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - Add OTP support - Fix module unload while an op in progress - Add various cleanup patches SPI NOR controller drivers changes: - intel-spi: Move platform data header to x86 subfolder
2021-04-15Merge tag 'cfi/for-5.13' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next CFI changes Just a couple of fixes for v5.13-rc1 * Disable broken buffered writes for CFI chips within ID 0x2201 * Address a Coverity report for unused value
2021-04-15Merge branch 'for-5.12' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.13
generated by cgit (git 2.34.1) at 2025-09-24 14:43:50 +0000