| Age | Commit message (Collapse) | Author |
|---|
|
Convert the tables to make use of ETHTOOL link mode bits, rather than
the old u32 SUPPORTED speeds. Make use of the linkmode helps to set
bits and compare linkmodes. As a result, the _u32 members of keee are
no longer used, a step towards removing them.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for bit manipulation of EEE
advertise, support and link partner support. The aim is to drop the
restricted _u32 variants in the near future.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Rework determining if EEE is active to make is similar as to how
phylib decides, and make use of a phylib helper to validate if EEE is
valid in for the current link mode. This then requires that PHYLIB is
selected.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Moving struct ieee80211_sta *sta variable definition to the front
of the code to fix the ISO C90 forbids mixed declarations and code
warning.
Fixes: 43532c050f8e ("wifi: rtl8xxxu: support multiple interfaces in set_aifs()")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/TYAP286MB03157A408E0D69F2F6FBD88ABC552@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
This code wants to compare the obtained value, but as it also
has a special type for register addresses to find places doing
such compares and calculations wrong, we need explicit casts
here to silence sparse.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.976fcd59e97a.I0bba4ef7dc2847ce8ab5ec229149e1a09413b8b9@changeid
|
|
Clearly writing __le32 was intended here, so just put the
right casts into the code to silence sparse about it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.ce0c714124e9.I2b5710b761f63522574fbe7654d37151c31e0b77@changeid
|
|
sparse complains on this code about casts that lose bits
due to the usage of bitwise not, but really we do want
16 bits only, so clarify that by using masks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.06e5ade90bcd.I41a0cbae1fa259cfbf5fa117ddfce908877475a2@changeid
|
|
sparse complains on this code about casts that lose bits
due to the usage of bitwise not, but really we do want
16 bits only, so clarify that by using masks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.c64e2d348453.Iccc4ace1116721a044e5f31f40ea7709e72145f3@changeid
|
|
Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.
This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.
To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.
Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
<Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
Fixes: 5a5586112b929 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Updating link clock rate for different speeds is only needed when
using RGMII, as that mode requires changing clock speed when the link
speed changes. Let's restrict updating the link clock speed in
ethqos_update_link_clk() to just RGMII. Other modes such as SGMII
only need to enable the link clock (which is already done in probe).
Signed-off-by: Sarosh Hasan <quic_sarohasa@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a previous patch I added "select PHYLIB" at the wrong place for the
ADIN1110 driver symbol, so move it to its correct place under the
ADIN1110 kconfig symbol.
Fixes: a9f80df4f514 ("net: ethernet: adi: requires PHYLIB support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/lkml/77012b38-4b49-47f4-9a88-d773d52909ad@infradead.org/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3
Cc: Lennart Franzen <lennart@lfdomain.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Nuno Sa <nuno.sa@analog.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sun8i_ce_cipher_unprepare should be called before
crypto_finalize_skcipher_request, because client callbacks may
immediately free memory, that isn't needed anymore. But it will be
used by unprepare after free. Before removing prepare/unprepare
callbacks it was handled by crypto engine in crypto_finalize_request.
Usually that results in a pointer dereference problem during a in
crypto selftest.
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000030
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000004716d000
[0000000000000030] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
This problem is detected by KASAN as well.
==================================================================
BUG: KASAN: slab-use-after-free in sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce]
Read of size 8 at addr ffff00000dcdc040 by task 1c15000.crypto-/373
Hardware name: Pine64 PinePhone (1.2) (DT)
Call trace:
dump_backtrace+0x9c/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
print_report+0xf8/0x5d8
kasan_report+0x90/0xd0
__asan_load8+0x9c/0xc0
sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce]
crypto_pump_work+0x354/0x620 [crypto_engine]
kthread_worker_fn+0x244/0x498
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Allocated by task 379:
kasan_save_stack+0x3c/0x68
kasan_set_track+0x2c/0x40
kasan_save_alloc_info+0x24/0x38
__kasan_kmalloc+0xd4/0xd8
__kmalloc+0x74/0x1d0
alg_test_skcipher+0x90/0x1f0
alg_test+0x24c/0x830
cryptomgr_test+0x38/0x60
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Freed by task 379:
kasan_save_stack+0x3c/0x68
kasan_set_track+0x2c/0x40
kasan_save_free_info+0x38/0x60
__kasan_slab_free+0x100/0x170
slab_free_freelist_hook+0xd4/0x1e8
__kmem_cache_free+0x15c/0x290
kfree+0x74/0x100
kfree_sensitive+0x80/0xb0
alg_test_skcipher+0x12c/0x1f0
alg_test+0x24c/0x830
cryptomgr_test+0x38/0x60
kthread+0x168/0x178
ret_from_fork+0x10/0x20
The buggy address belongs to the object at ffff00000dcdc000
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 64 bytes inside of
freed 256-byte region [ffff00000dcdc000, ffff00000dcdc100)
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 4136212ab18e ("crypto: sun8i-ce - Remove prepare/unprepare request")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for resetting the device using a reset controller,
complementing the existing GPIO reset functionality (reset-gpios).
Although the reset is optional and the driver performs a soft reset
during setup, if the initial reset pin state was asserted, the driver
will not detect the device until the reset is deasserted.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
sysc_device_type variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Message-ID: <20240219-device_cleanup-ti-sysc-v1-1-13b53177d0a5@marliere.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Sanity check range bias with DRM_BUDDY_RANGE_ALLOCATION.
v2:
- Be consistent with u32 here.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219121851.25774-6-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Likely not a big deal for real users, but for consistency we should
respect the min_page_size here. Main issue is that bias allocations
turns into normal range allocation if the range and size matches
exactly, and in the next patch we want to add some unit tests for this
part of the api.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219121851.25774-5-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
There is a corner case here where start/end is after/before the block
range we are currently checking. If so we need to be sure that splitting
the block will eventually give use the block size we need. To do that we
should adjust the block range to account for the start/end, and only
continue with the split if the size/alignment will fit the requested
size. Not doing so can result in leaving split blocks unmerged when it
eventually fails.
Fixes: afea229fe102 ("drm: improve drm_buddy_alloc function")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219121851.25774-4-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.8-rc7
Few remaining fixes, hopefully the last wireless pull request to v6.8.
Two fixes to the stack and two to iwlwifi but no high priority fixes
this time.
* tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: only call drv_sta_rc_update for uploaded stations
MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files
MAINTAINERS: wifi: update Jeff Johnson e-mail address
wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
wifi: iwlwifi: mvm: ensure offloading TID queue exists
wifi: nl80211: reject iftype change with mesh ID change
====================
Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Disable BH around the call to napi_schedule() to avoid following
error:
NOHZ tick-stop error: local softirq work is pending, handler #08!!!
Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace macro MAC_ADDRESS_EQUAL() for null_mac_addr checking with inline
function__agg_has_partner(). When MAC_ADDRESS_EQUAL() is verifiying
aggregator's partner mac addr with null_mac_addr, means that seeing if
aggregator has a valid partner or not. Using __agg_has_partner() makes it
more clear to understand.
In ad_port_selection_logic(), since aggregator->partner_system and
port->partner_oper.system has been compared first as a prerequisite, it is
safe to replace the upcoming MAC_ADDRESS_EQUAL() for null_mac_addr checking
with __agg_has_partner().
Delete null_mac_addr, which is not required anymore in bond_3ad.c, since
all references to it are gone.
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/SI2PR04MB5097BCA8FF2A2F03D9A5A3EEDC5A2@SI2PR04MB5097.apcprd04.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently using plain XDP/ZC sockets on stmmac results in a kernel crash:
|[ 255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
|[...]
|[ 255.822764] Call trace:
|[ 255.822766] stmmac_tx_clean.constprop.0+0x848/0xc38
The program counter indicates xsk_tx_metadata_complete(). It works on
compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to
missing meta data. Therefore, call xsk_tx_metadata_complete() only when
meta data is actually used.
Tested on imx93 without XDP, with XDP and with XDP/ZC.
Fixes: 1347b419318d ("net: stmmac: Add Tx HWTS support to XDP ZC")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/netdev/87r0h7wg8u.fsf@kurt.kurt.home/
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240222-stmmac_xdp-v2-1-4beee3a037e4@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MII code does not check the return value of mdio_read (among
others), and therefore no error code should be sent. A previous fix to
the use of an uninitialized variable propagates negative error codes,
that might lead to wrong operations by the MII library.
An example of such issues is the use of mii_nway_restart by the dm9601
driver. The mii_nway_restart function does not check the value returned
by mdio_read, which in this case might be a negative number which could
contain the exact bit the function checks (BMCR_ANENABLE = 0x1000).
Return zero in case of error, as it is common practice in users of
mdio_read to avoid wrong uses of the return value.
Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "port_prox" variable is a pointer to "struct port_proxy" and
this structure ends in a flexible array:
struct port_proxy {
[...]
struct t7xx_port ports[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + size * count" in the
devm_kzalloc() function.
This way, the code is more readable and safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240224181932.2720-1-erick.archer@gmx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KUNIT_FAIL() is used to fail the xe_migrate test when an error occurs.
However, there's a mismatch in the format specifier: '%li' is used to
log 'err', which is an 'int'.
Use '%i' instead of '%li', and for the case where we're printing an
error pointer, just use '%pe', instead of extracting the error code
manually with PTR_ERR(). (This also results in a nicer output when the
error code is known.)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
'days' is a s64 (from div_s64), and so should use a %lld specifier.
This was found by extending KUnit's assertion macros to use gcc's
__printf attribute.
Fixes: 1d1bb12a8b18 ("rtc: Improve performance of rtc_time64_to_tm(). Add tests.")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In raid5_cache_count():
if (conf->max_nr_stripes < conf->min_nr_stripes)
return 0;
return conf->max_nr_stripes - conf->min_nr_stripes;
The current check is ineffective, as the values could change immediately
after being checked.
In raid5_set_cache_size():
...
conf->min_nr_stripes = size;
...
while (size > conf->max_nr_stripes)
conf->min_nr_stripes = conf->max_nr_stripes;
...
Due to intermediate value updates in raid5_set_cache_size(), concurrent
execution of raid5_cache_count() and raid5_set_cache_size() may lead to
inconsistent reads of conf->max_nr_stripes and conf->min_nr_stripes.
The current checks are ineffective as values could change immediately
after being checked, raising the risk of conf->min_nr_stripes exceeding
conf->max_nr_stripes and potentially causing an integer overflow.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including data races and atomicity violations. The above possible bug is
reported when our tool analyzes the source code of Linux 6.2.
To resolve this issue, it is suggested to introduce local variables
'min_stripes' and 'max_stripes' in raid5_cache_count() to ensure the
values remain stable throughout the check. Adding locks in
raid5_cache_count() fails to resolve atomicity violations, as
raid5_set_cache_size() may hold intermediate values of
conf->min_nr_stripes while unlocked. With this patch applied, our tool no
longer reports the bug, with the kernel configuration allyesconfig for
x86_64. Due to the lack of associated hardware, we cannot test the patch
in runtime testing, and just verify it according to the code logic.
Fixes: edbe83ab4c27 ("md/raid5: allow the stripe_cache to grow and shrink.")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240112071017.16313-1-2045gemini@gmail.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Use riscv_intc_aia_irq() as the low-level interrupt handler instead of the
existing riscv_intc_irq() default handler to make demultiplexing work
correctly.
Also print "using AIA" in the INTC boot banner when AIA is available.
Fixes: 3c46fc5b5507 ("irqchip/riscv-intc: Add support for RISC-V AIA")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240226040746.1396416-2-apatel@ventanamicro.com
|
|
With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n
linux kernel crashes when you try perf record:
$ perf record ls
[ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 46.750199] Oops [#1]
[ 46.750342] Modules linked in:
[ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2
[ 46.750906] Hardware name: riscv-virtio,qemu (DT)
[ 46.751184] epc : 0x0
[ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e
[ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0
[ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0
[ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930
[ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000
[ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004
[ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2
[ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000
[ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078
[ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001
[ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff
[ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30
[ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c
[ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec.
[ 46.754939] ---[ end trace 0000000000000000 ]---
[ 46.755131] note: perf-exec[107] exited with irqs disabled
[ 46.755546] note: perf-exec[107] exited with preempt_count 4
This happens because in the legacy case the ctr_get_width function was not
defined, but it is used in arch_perf_update_userpage.
Also remove extra check in riscv_pmu_ctr_get_width_mask
Signed-off-by: Vadim Shakirov <vadim.shakirov@syntacore.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Fixes: cc4c07c89aad ("drivers: perf: Implement perf event mmap support in the SBI backend")
Link: https://lore.kernel.org/r/20240227170002.188671-3-vadim.shakirov@syntacore.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Added the PERF_PMU_CAP_NO_INTERRUPT flag because the legacy pmu driver
does not provide sampling capabilities
Added the PERF_PMU_CAP_NO_EXCLUDE flag because the legacy pmu driver
does not provide the ability to disable counter incrementation in
different privilege modes
Suggested-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Vadim Shakirov <vadim.shakirov@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Fixes: 9b3e150e310e ("RISC-V: Add a simple platform driver for RISC-V legacy perf")
Link: https://lore.kernel.org/r/20240227170002.188671-2-vadim.shakirov@syntacore.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This reverts commit e490d60a2f76bff636c68ce4fe34c1b6c34bbd86.
This causes hangs on SI when DC is enabled and errors on driver
reboot and power off cycles.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3216
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2755
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Currently, GPU resets can now be performed successfully on the Raven
series. While GPU reset is required for the S3 suspend abort case.
So now can enable gpu reset for S3 abort cases on the Raven series.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's unreasonable to use 0 as the power1_min_cap when
OD is disabled. So, use the same lower limit as the value
used when OD is enabled.
Fixes: 1958946858a6 ("drm/amd/pm: Support for getting power1_cap_min value")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Adds a check in the map_hw_resources function to prevent a potential
buffer overflow. The function was accessing arrays using an index that
could potentially be greater than the size of the arrays, leading to a
buffer overflow.
Adds a check to ensure that the index is within the bounds of the
arrays. If the index is out of bounds, an error message is printed and
break it will continue execution with just ignoring extra data early to
prevent the buffer overflow.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7
Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2")
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/0bdce86b50e5aa50cffbc4add332cbfbad87521e.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/r/ac551b89025bafadce05102b94596f8cd3564a32.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1a80e31525d0b02063d2ff1baaaa5e87418f54b6.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/2d367ab738ed2e4cf58cffc10d64b0cbe8a1322c.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/6dc03cf63382d24f954c167aaa988f8e31d6b89d.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/071057cfdc0bc52c574f74156b410c0337adb69c.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/df977ad4c02ff913b01cdd6c348e7fae3e08e651.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/64c2f79760c53f29651e7126418c407ff699317d.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1e7143ca68ff0715e0f954504e750fc92e8c6d80.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/4c852a3359aa06bedcf3a10f3fd8c1e008cc5a3a.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/c0e5afe62256860150d25bcf644f2b8d62794c86.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/edeee074956dd943d3c67da894a01dc5f0d33bd7.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/472fc6f6bcd54b73f8af206d079a80cb8744d0ca.1703284359.git.u.kleine-koenig@pengutronix.de
|
|
Pass the initial queue limits to blk_mq_alloc_disk and use the
blkif_set_queue_limits API to update the limits on reconnect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240221125845.3610668-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkif_set_queue_limits already sets the max_sements limits, so don't do
it a second time. Also remove a comment about a long fixe bug in
blk_mq_update_nr_hw_queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240221125845.3610668-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer now sets the discard granularity to the physical
block size default. Take advantage of that in xen-blkfront and only
set the discard granularity if explicitly specified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240221125845.3610668-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
