| Age | Commit message (Collapse) | Author |
|---|
|
Currently, code retries n2 times to open control dlci in ABM mode before
switching to ADM mode, but only if DM has been received. This contradicts
to the comment that dlci is switched to control mode unconditionally if
DLCI_OPENING retries time out. Also, it does not make sense to continue
trying once DM has received.
Change the logic to switch to ADM mode upon DM received. That way control
channel state will change to DLCI_OPEN way faster. Fix the misleading
comment while at it.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20241228150100.100354-3-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently code does not wait for channel 0 open sequence to complete before
pushing data to the other channels. Also, if userland opens tty, it will
receive EL2NSYNC. Both issues result in hard to predict initialization
sequence and possible userland failures.
Fix that by waiting channel 0 open sequence to complete before attempting
opening of the other channels. Also, if tty open() is attempted while
channel 0 is opening, wait until sequence is complete before returning to
userland.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20241228150100.100354-2-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Need to flush UART RX and TX FIFO when lpuart is shutting down to make
sure restore a clean data transfer environment.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20250107074834.3115230-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some SoCs like the i.MX943 have aliases for up to 12 UARTs, need to
increase UART_NR from 8 to 12 to support lpuart9-12 to avoid
initialization failures.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20250103071154.3070924-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The error handling for the case `con_index == 0` should involve dropping
the pm usage counter, as ucsi_ccg_sync_control() gets it at the
beginning. Fix it.
Cc: stable <stable@kernel.org>
Fixes: e56aac6e5a25 ("usb: typec: fix potential array underflow in ucsi_ccg_sync_control()")
Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250107015750.2778646-1-gongruiqi1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes data corruption when accessing the internal SD card in mass
storage mode.
I am actually not too sure why. I didn't figure a straightforward way to
reproduce the issue, but i seem to get garbage when issuing a lot (over 50)
of large reads (over 120 sectors) are done in a quick succession. That is,
time seems to matter here -- larger reads are fine if they are done with
some delay between them.
But I'm not great at understanding this sort of things, so I'll assume
the issue other, smarter, folks were seeing with similar phones is the
same problem and I'll just put my quirk next to theirs.
The "Software details" screen on the phone is as follows:
V 04.06
07-08-13
RM-849
(c) Nokia
TL;DR version of the device descriptor:
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x06c2
bcdDevice 4.06
iManufacturer 1 Nokia
iProduct 2 Nokia 208
The patch assumes older firmwares are broken too (I'm unable to test, but
no biggie if they aren't I guess), and I have no idea if newer firmware
exists.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250101212206.2386207-1-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should do reverse selection of other components from
CONFIG_USB_F_MIDI2 which is tristate, instead of
CONFIG_USB_CONFIGFS_F_MIDI2 which is bool, for satisfying subtle
module dependencies.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250101131124.27599-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
At present, the SEV guest driver exclusively handles SNP guest messaging. All
routines for sending guest messages are embedded within it.
To support Secure TSC, SEV-SNP guests must communicate with the AMD Security
Processor during early boot. However, these guest messaging functions are not
accessible during early boot since they are currently part of the guest
driver.
Hence, relocate the core SNP guest messaging functions to SEV common code and
provide an API for sending SNP guest messages.
No functional change, but just an export symbol added for
snp_send_guest_request() and dropped the export symbol on
snp_issue_guest_request() and made it static.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-5-nikunj@amd.com
|
|
If a frame is going to be discarded by driver, this frame is never touched
by driver and the cache lines never become dirty obviously,
page_pool_recycle_direct() wastes CPU cycles on unnecessary calling of
page_pool_dma_sync_for_device() to sync entire frame.
page_pool_put_page() with sync_size setting to 0 is the proper method.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20250103093733.3872939-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the sev-guest driver is the only user of SNP guest messaging. All
routines for initializing SNP guest messaging are implemented within the
sev-guest driver and are not available during early boot.
In preparation for adding Secure TSC guest support, carve out APIs to allocate
and initialize the guest messaging descriptor context and make it part of
coco/sev/core.c. As there is no user of sev_guest_platform_data anymore,
remove the structure.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-4-nikunj@amd.com
|
|
Replace GFP_KERNEL_ACCOUNT with GFP_KERNEL in the sev-guest driver code.
GFP_KERNEL_ACCOUNT is typically used for accounting untrusted userspace
allocations. After auditing the sev-guest code, the following changes are
necessary:
* snp_init_crypto(): Use GFP_KERNEL as this is a trusted device probe
path.
Retain GFP_KERNEL_ACCOUNT in the following cases for robustness and
specific path requirements:
* alloc_shared_pages(): Although all allocations are limited, retain
GFP_KERNEL_ACCOUNT for future robustness.
* get_report() and get_ext_report(): These functions are on the unlocked
ioctl path and should continue using GFP_KERNEL_ACCOUNT.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-3-nikunj@amd.com
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-5-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-4-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Increase the PKG_C_LATENCY Pkg C Latency field by the added wake time.
v1: Initial version.
v2: Rebase and cosmetic changes.
v3:
- Place latency adjustment early to accommodate round-up. [Suraj]
- Modify commit description and cosmetic change. [Suraj]
WA: 22020432604
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106094408.1011063-1-animesh.manna@intel.com
|
|
Cache tag invalidation requests for a domain are accumulated until a
different iommu unit is found when traversing the cache_tags linked list.
But cache tags of same iommu unit can be distributed in the linked list,
this make batched flush less efficient. E.g., one device backed by iommu0
is attached to a domain in between two devices attaching backed by iommu1.
Group cache tags together for same iommu unit in cache_tag_assign() to
maximize the performance of batched flush.
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/r/20241219054358.8654-1-zhenzhong.duan@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When a device uses a PASID for SVA (Shared Virtual Address), it's possible
that the PASID entry is marked as non-present and FPD bit set before the
device flushes all ongoing DMA requests and removes the SVA domain. This
can occur when an exception happens and the process terminates before the
device driver stops DMA and calls the iommu driver to unbind the PASID.
There's no need to drain the PRQ in the mm release path. Instead, the PRQ
will be drained in the SVA unbind path. But in such case,
intel_pasid_tear_down_entry() only checks the presence of the pasid entry
and returns directly.
Add the code to clear the FPD bit and drain the PRQ.
Fixes: c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain removed from RID")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241217024240.139615-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The capability audit code was introduced by commit <ad3d19029979>
"iommu/vt-d: Audit IOMMU Capabilities and add helper functions", aiming
to verify the consistency of capabilities across all IOMMUs for supported
features.
Nowadays, all the kAPIs of the iommu subsystem have evolved to be device
oriented, in preparation for supporting heterogeneous IOMMU architectures.
There is no longer a need to require capability consistence among IOMMUs
for any feature.
Remove the iommu cap audit code to make the driver align with the design
in the iommu core.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20241216071828.22962-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This is duplicated by intel_iommu_domain_alloc_paging_flags(), just remove
it.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/0-v1-b101d00c5ee5+17645-vtd_paging_flags_jgg@nvidia.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a WARN_ON_ONCE to catch an unlikely situation when
domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless
happens we must avoid using a NULL pointer.
Signed-off-by: Kees Bakker <kees@ijzerbout.nl>
Link: https://lore.kernel.org/r/20241218201048.E544818E57E@bout3.ijzerbout.nl
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Remove is_vmpck_empty() which uses a local array allocation to check if the
VMPCK is empty and replace it with memchr_inv() to directly determine if the
VMPCK is empty without additional memory allocation.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-2-nikunj@amd.com
|
|
Currently, when bandwidth is insufficient for a given mode, we attempt
to use DSC. This is indicated by a debug print, followed by a check for
DSC support.
The debug message states that we are trying DSC, but DSC might not be
supported, which can give an incorrect picture in the logs if we bail
out later.
Correct the order for both DP and DP MST to:
- Check if DSC is required and supported, and return early if DSC is
not supported.
- Print a debug message to indicate that DSC will be tried next.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103031424.1732774-1-ankit.k.nautiyal@intel.com
|
|
Realtek's chips follow suggestion of PCIe spec to design the max timeout of
PCI completion, but some PCIe host reply too slow to meet it and lead PCI
AER. Disable PCI completion timeout function via PCI configuration to
avoid the AER.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241225122804.10214-1-pkshih@realtek.com
|
|
_opp_add_static_v2() leaks the obtained OF node reference when
_of_opp_alloc_required_opps() fails. Add an of_node_put() call in the
error path.
Fixes: 3466ea2cd6b6 ("OPP: Don't drop opp->np reference while it is still in use")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The new customer ID was found on a MPG X870E CARBON WIFI (MS-7E49) with
a NCT6687D chip.
Signed-off-by: John Audia <therealgraysky@proton.me>
[groeck: Resolved conflicts in Documentation/hwmon/nct6683.rst]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Every case in the switch-block ends with return statement, and the
default: branch handles the cases where rsrc_type is invalid and
returns "Unknown", this makes the return statement at the end of the
function unreachable and redundant.
The semi-colon is not required after the switch-block's curly braces.
Remove the semi-colon after the switch-block's curly braces and the
return statement at the end of the function.
This issue was reported by Coverity Scan.
Signed-off-by: Nihar Chaithanya <niharchaithanya@gmail.com>
Link: https://patch.msgid.link/20250104171905.13293-1-niharchaithanya@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Variable 'info' is obtained via container_of() of struct work_struct, so
it cannot be NULL. Simplify the code and solve Smatch warning:
drivers/nfc/st21nfca/dep.c:119 st21nfca_tx_work() warn: can 'info' even be NULL?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250104142043.116045-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During ARP failure, tid is not inserted but _c4iw_free_ep()
attempts to remove tid which results in error.
This patch fixes the issue by avoiding removal of uninserted tid.
Fixes: 59437d78f088 ("cxgb4/chtls: fix ULD connection failures due to wrong TID base")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20250103092327.1011925-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DIM work will call the firmware to adjust the coalescing parameters on
the RX rings. We should cancel DIM work before we call the firmware
to free the RX rings. Otherwise, FW will reject the call from DIM
work if the RX ring has been freed. This will generate an error
message like this:
bnxt_en 0000:21:00.1 ens2f1np1: hwrm req_type 0x53 seq id 0x6fca error 0x2
and cause unnecessary concern for the user. It is also possible to
modify the coalescing parameters of the wrong ring if the ring has
been re-allocated.
To prevent this, cancel DIM work right before freeing the RX rings.
We also have to add a check in NAPI poll to not schedule DIM if the
RX rings are shutting down. Check that the VNIC is active before we
schedule DIM. The VNIC is always disabled before we free the RX rings.
Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown")
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250104043849.3482067-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When hwrm_req_replace() fails, the driver is not invoking bnxt_req_drop()
which could cause a memory leak.
Fixes: bbf33d1d9805 ("bnxt_en: update all firmware calls to use the new APIs")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250104043849.3482067-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only part of the __scm_smc_call() function uses 'mempool' variable, so
narrow the scope to make it more readable.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-6-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit ca61d6836e6f ("firmware: qcom: scm: fix a NULL-pointer
dereference") makes it explicit that qcom_scm_get_tzmem_pool() can
return NULL, therefore its users should handle this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-5-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
If SCM driver fails the probe, it should not leave global '__scm'
variable assigned, because external users of this driver will assume the
probe finished successfully. For example TZMEM parts ('__scm->mempool')
are initialized later in the probe, but users of it (__scm_smc_call())
rely on the '__scm' variable.
This fixes theoretical NULL pointer exception, triggered via introducing
probe deferral in SCM driver with call trace:
qcom_tzmem_alloc+0x70/0x1ac (P)
qcom_tzmem_alloc+0x64/0x1ac (L)
qcom_scm_assign_mem+0x78/0x194
qcom_rmtfs_mem_probe+0x2d4/0x38c
platform_probe+0x68/0xc8
Fixes: 40289e35ca52 ("firmware: qcom: scm: enable the TZ mem allocator")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-4-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq
completion variable initialization") introduced a write barrier in probe
function to store global '__scm' variable. We all known barriers are
paired (see memory-barriers.txt: "Note that write barriers should
normally be paired with read or address-dependency barriers"), therefore
accessing it from concurrent contexts requires read barrier. Previous
commit added such barrier in qcom_scm_is_available(), so let's use that
directly.
Lack of this read barrier can result in fetching stale '__scm' variable
value, NULL, and dereferencing it.
Note that barrier in qcom_scm_is_available() satisfies here the control
dependency.
Fixes: ca61d6836e6f ("firmware: qcom: scm: fix a NULL-pointer dereference")
Fixes: 449d0d84bcd8 ("firmware: qcom: scm: smc: switch to using the SCM allocator")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-2-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq
completion variable initialization") introduced a write barrier in probe
function to store global '__scm' variable. It also claimed that it
added a read barrier, because as we all known barriers are paired (see
memory-barriers.txt: "Note that write barriers should normally be paired
with read or address-dependency barriers"), however it did not really
add it.
The offending commit used READ_ONCE() to access '__scm' global which is
not a barrier.
The barrier is needed so the store to '__scm' will be properly visible.
This is most likely not fatal in current driver design, because missing
read barrier would mean qcom_scm_is_available() callers will access old
value, NULL. Driver does not support unbinding and does not correctly
handle probe failures, thus there is no risk of stale or old pointer in
'__scm' variable.
However for code correctness, readability and to be sure that we did not
mess up something in this tricky topic of SMP barriers, add a read
barrier for accessing '__scm'. Change also comment from useless/obvious
what does barrier do, to what is expected: which other parts of the code
are involved here.
Fixes: 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization")
Cc: stable@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-1-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Consolidate BWC polling for completion into one function
and set a time limit on the loop that polls for completion.
This can happen only if there is some issue with FW/PCI/HW,
such as FW being stuck, PCI issue, etc.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-16-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since sampler isn't currently supported via HWS, use a FW island
that forwards any packets to the supplied sampler.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-15-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When writing arg data, wrong size was used - fixing this.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-14-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handle all negative return values as errors, not just -1.
The code previously treated -ENOMEM (and potentially other negative
values) as valid segment numbers, leading to incorrect behavior.
This fix ensures that any negative return value is treated as an error.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When bit offset for HWS_SET32 macro is negative,
UBSAN complains about the shift-out-of-bounds:
UBSAN: shift-out-of-bounds in
drivers/net/ethernet/mellanox/mlx5/core/steering/hws/definer.c:177:2
shift exponent -8 is negative
Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mark the HWS SQ as 'non_wire' so that 'Flow Update' flow
won't mix with network traffic.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rule counter in matcher's struct is used in two places:
1. As heuristics to decide when the number of rules have crossed a
certain percentage threshold and the matcher should be resized.
We don't mind here if the number will be off by 1-2 due to concurrency.
2. When destroying matcher, the counter value is checked and the
user is warned if it is not 0. Here we lock all the queues, so the
counter will be correct.
We don't need to always have *exact* number, but we do need this
number to not be corrupted, which is what is happening when the
counter isn't atomic, due to update by different threads.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of having a large array of action templates allocated with
kmalloc, have smaller array and allocate it with kvmalloc.
The size of the array represents the max number of AT attach
operations for the same matcher. This number is not expected
to be very high. In any case, when the limit is reached, the
next attempt to attach new AT will result in creation of a new
matcher and moving all the rules to this matcher.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove wrong cleanup of the old miss table list and
simplify the error flow in the function.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, when firmware failure occurs during matcher disconnect flow,
the error flow of the function reconnects the matcher back and returns
an error, which continues running the calling function and eventually
frees the matcher that is being disconnected.
This leads to a case where we have a freed matcher on the matchers list,
which in turn leads to use-after-free and eventual crash.
This patch fixes that by not trying to reconnect the matcher back when
some FW command fails during disconnect.
Note that we're dealing here with FW error. We can't overcome this
problem. This might lead to bad steering state (e.g. wrong connection
between matchers), and will also lead to resource leakage, as it is
the case with any other error handling during resource destruction.
However, the goal here is to allow the driver to continue and not crash
the machine with use-after-free error.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add error message for failure to move rules from
old matcher to new one during rehash.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In pools, STCs and actions: no need to allocate array for various
table types, as HWS is used to manage only FDB flow tables.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some HWS structs have refcounts that are just u32.
Comment how they are protected and add '__must_hold()'
annotation where applicable.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove functions that manage alias objects - they are not used.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove definition in HWS of structs that are already defined
in mlx5_ifc.h, and fix the usage of these structs.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250102181415.1477316-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The gcc_xo_clk is required for the functionality of the WiFi
copy engine block. Therefore, add the gcc_xo_clk in gcc driver.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20241210064110.130466-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
