summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-12-20Merge tag 'rtc-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - Remove nvram ABI. There was no complaints about the deprecation for the last 3 years. - Improve RTC device allocation and registration - Now available for ARCH=um Drivers: - at91rm9200: correction and sam9x60 support - ds1307: improve ACPI support - mxc: now DT only - pcf2127: watchdog support now needs the reset-source property - pcf8523: set range - rx6110: i2c support" * tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (43 commits) rtc: pcf2127: only use watchdog when explicitly available dt-bindings: rtc: add reset-source property rtc: fix RTC removal rtc: s3c: Remove dead code related to periodic tick handling rtc: s3c: Disable all enable (RTC, tick) bits in the probe rtc: ep93xx: Fix NULL pointer dereference in ep93xx_rtc_read_time rtc: test: remove debug message rtc: mxc{,_v2}: enable COMPILE_TEST rtc: enable RTC framework on ARCH=um rtc: pcf8523: use BIT rtc: pcf8523: set range rtc: pcf8523: switch to devm_rtc_allocate_device rtc: destroy mutex when releasing the device rtc: shrink devm_rtc_allocate_device() rtc: rework rtc_register_device() resource management rtc: nvmem: emit an error message when nvmem registration fails rtc: add devm_ prefix to rtc_nvmem_register() rtc: nvmem: remove nvram ABI Documentation: list RTC devres helpers in devres.rst rtc: omap: use devm_pinctrl_register() ...
2020-12-20mt76: mt7915: fix MESH ifdef blockRandy Dunlap
Fix a build error when CONFIG_MAC80211_MESH is not enabled: ../drivers/net/wireless/mediatek/mt76/mt7915/init.c:47:2: error: expected expression before '}' token }, { ^ Fixes: af901eb4ab80 ("mt76: mt7915: get rid of dbdc debugfs knob") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Shayne Chen <shayne.chen@mediatek.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201218173202.23159-1-rdunlap@infradead.org
2020-12-20mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queueLorenzo Bianconi
Fix a possible NULL pointer dereference in mt76s_process_tx_queue that can occur if status thread runs before allocating tx queues Fixes: 6a618acb7e62 ("mt76: sdio: convert {status/net}_work to mt76_worker") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/b49c1b4edacd87b2241a9fd0431dd4864c8963f6.1607418933.git.lorenzo@kernel.org
2020-12-20mt76: sdio: remove wake logic in mt76s_process_tx_queueLorenzo Bianconi
Similar to mmio/usb code path, remove wake logic in mt76s_process_tx_queue routine. Starting from commit 90d494c99a99 ("mt76: improve tx queue stop/wake"), the wake queue logic on the sdio status path is no longer necessary since the hw queues are no longer stopped on the mt76 tx path. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/d2d7d9d437f4dec2ef1df0ed070b9cf299f021ad.1607164041.git.lorenzo@kernel.org
2020-12-20mt76: usb: remove wake logic in mt76u_status_workerLorenzo Bianconi
Similar to mmio code path, remove wake logic in mt76u_status_worker handler. Starting from commit 90d494c99a99 ("mt76: improve tx queue stop/wake")', the wake queue logic on the usb status path is no longer necessary since the hw queues are no longer stopped on the mt76 tx path. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/00009bf0cfdc9565e4432cad3ed51888c667c25d.1607164041.git.lorenzo@kernel.org
2020-12-20Merge ath-current from ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 5.11. Major changes: ath11k * add null check for skb allocation * fix crash found during connect/disconnect stress testing * fix for HT disabled case * brown paperbag fixes for my bugs in suspend code * fix an unnecessary qmi allocation during firmware bootup * disable ASPM during firmware bootup to avoid issues
2020-12-19clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"Geert Uytterhoeven
Commit 45c940184b501fc6 ("dt-bindings: clk: versaclock5: convert to yaml") accidentally changed "idt,voltage-microvolts" to "idt,voltage-microvolt" in the DT bindings, while the driver still used the former. Update the driver to match the bindings, as Documentation/devicetree/bindings/property-units.txt actually recommends using "microvolt". Fixes: 260249f929e81d3d ("clk: vc5: Enable addition output configurations of the Versaclock") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201218125253.3815567-1-geert+renesas@glider.be Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: ingenic: Fix divider calculation with div tablesPaul Cercueil
The previous code assumed that a higher hardware value always resulted in a bigger divider, which is correct for the regular clocks, but is an invalid assumption when a divider table is provided for the clock. Perfect example of this is the PLL0_HALF clock, which applies a /2 divider with the hardware value 0, and a /1 divider otherwise. Fixes: a9fa2893fcc6 ("clk: ingenic: Add support for divider tables") Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201212135733.38050-1-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: sunxi-ng: Make sure divider tables have sentinelJernej Skrabec
Two clock divider tables are missing sentinel at the end. Effect of that is that clock framework reads past the last entry. Fix that with adding sentinel at the end. Issue was discovered with KASan. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201202203817.438713-1-jernej.skrabec@siol.net Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: s2mps11: Fix a resource leak in error handling paths in the probe functionChristophe JAILLET
Some resource should be released in the error handling path of the probe function, as already done in the remove function. The remove function was fixed in commit bf416bd45738 ("clk: s2mps11: Add missing of_node_put and of_clk_del_provider") Fixes: 7cc560dea415 ("clk: s2mps11: Add support for s2mps11") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201212122818.86195-1-christophe.jaillet@wanadoo.fr Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9Terry Zhou
There is an error in the current code that the XTAL MODE pin was set to NB MPP1_31 which should be NB MPP1_9. The latch register of NB MPP1_9 has different offset of 0x8. Signed-off-by: Terry Zhou <bjzhou@marvell.com> [pali: Fix pin name in commit message] Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 7ea8250406a6 ("clk: mvebu: Add the xtal clock for Armada 3700 SoC") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201106100039.11385-1-pali@kernel.org Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: si5351: Wait for bit clear after PLL resetSascha Hauer
Documentation states that SI5351_PLL_RESET_B and SI5351_PLL_RESET_A bits are self clearing bits, so wait until they are cleared before continuing. This fixes a case when the clock doesn't come up properly after a PLL reset. It worked properly when the frequency was below 900MHz, but with 900MHz it only works when we are waiting for the bit to clear. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20201130091033.1687-1-s.hauer@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sam9x60: remove atmel,osc-bypass supportAlexandre Belloni
The sam9x60 doesn't have the MOSCXTBY bit to enable the crystal oscillator bypass. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201202125816.168618-1-alexandre.belloni@bootlin.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19Merge tag 'for-linus-5.11-rc1b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Some minor cleanup patches and a small series disentangling some Xen related Kconfig options" * tag 'for-linus-5.11-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Kconfig: remove X86_64 depends from XEN_512GB xen/manage: Fix fall-through warnings for Clang xen-blkfront: Fix fall-through warnings for Clang xen: remove trailing semicolon in macro definition xen: Kconfig: nest Xen guest options xen: Remove Xen PVH/PVHVM dependency on PCI x86/xen: Convert to DEFINE_SHOW_ATTRIBUTE
2020-12-19Merge branch 'pcmcia-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux Pull pcmcia updates from Dominik Brodowski: "Besides a few PCMCIA odd fixes, the NEC VRC4173 CARDU driver is removed, as it has not compiled in ages" * 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: pcmcia: omap: Fix error return code in omap_cf_probe() pcmcia: Remove NEC VRC4173 CARDU pcmcia: db1xxx_ss: remove unneeded semicolon pcmcia/electra_cf: Fix some return values in 'electra_cf_probe()' in case of error
2020-12-19Merge tag 'i3c/for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Boris Brezillon: - Add the HCI driver - Add a missing destroy_workqueue() in an error path - Flag Alexandre Belloni as the new maintainer * tag 'i3c/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c/master/mipi-i3c-hci: quiet maybe-unused variable warning i3c: Resign from my maintainer role i3c/master: Fix uninitialized variable next_addr i3c/master: introduce the mipi-i3c-hci driver dt-bindings: i3c: MIPI I3C Host Controller Interface i3c master: fix missing destroy_workqueue() on error in i3c_master_register
2020-12-19Merge tag 'for-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Battery/charger driver changes: - collie_battery, generic-adc-battery, s3c-adc-battery: convert to GPIO descriptors (incl ARM board files) - misc cleanup and fixes Reset drivers: - new poweroff driver for force disabling a regulator - use printk format symbol resolver - ocelot: add support for Luton and Jaguar2" * tag 'for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (31 commits) power: supply: Fix a typo in warning message Documentation: DT: binding documentation for regulator-poweroff power: reset: new driver regulator-poweroff power: supply: ab8500: Use dev_err_probe() for IIO channels power: supply: ab8500_fg: Request all IRQs as threaded power: supply: ab8500_charger: Oneshot threaded IRQs power: supply: ab8500: Convert to dev_pm_ops power: supply: ab8500: Use local helper power: supply: wm831x_power: remove unneeded break power: supply: bq24735: Drop unused include power: supply: bq24190_charger: Drop unused include power: supply: generic-adc-battery: Use GPIO descriptors power: supply: collie_battery: Convert to GPIO descriptors power: supply: bq24190_charger: fix reference leak power: supply: s3c-adc-battery: Convert to GPIO descriptors power: reset: Use printk format symbol resolver power: supply: axp20x_usb_power: Use power efficient workqueue for debounce power: supply: axp20x_usb_power: fix typo power: supply: max8997-charger: Improve getting charger status power: supply: max8997-charger: Fix platform data retrieval ...
2020-12-19Merge tag 'hsi-for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: "Misc cleanups" * tag 'hsi-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: core: fix a kernel-doc markup HSI: omap_ssi: Don't jump to free ID in ssi_add_controller()
2020-12-19Merge tag 'pwm/for-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This is a fairly big release cycle from the PWM framework's point of view. There's a large patcheset here which converts drivers to use the new devm_platform_ioremap_resource() helper and a bunch of minor fixes to existing drivers. Some of the existing drivers also add support for more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183. Finally there's a couple of new drivers for Intel Keem Bay and LGM SoCs as well as the DesignWare PWM controller" * tag 'pwm/for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (66 commits) pwm: sun4i: Remove erroneous else branch pwm: sl28cpld: Set driver data before registering the PWM chip pwm: Remove unused function pwmchip_add_inversed() pwm: imx27: Fix overflow for bigger periods pwm: bcm2835: Support apply function for atomic configuration pwm: keembay: Fix build failure with -Os pwm: core: Use octal permission pwm: lpss: Make compilable with COMPILE_TEST pwm: Fix dependencies on HAS_IOMEM pwm: Use -EINVAL for unsupported polarity pwm: sti: Remove unnecessary blank line pwm: sti: Avoid conditional gotos pwm: Add PWM fan controller driver for LGM SoC Add DT bindings YAML schema for PWM fan controller of LGM SoC pwm: Add DesignWare PWM Controller Driver dt-bindings: pwm: mtk-disp: add MT8167 SoC binding pwm: mediatek: Add MT8183 SoC support pwm: mediatek: Always use bus clock dt-bindings: pwm: pwm-mediatek: Add documentation for MT8183 SoC pwm: Add PWM driver for Intel Keem Bay ...
2020-12-19clk: at91: sama7g5: register cpu clockClaudiu Beznea
Register CPU clock as being the master clock prescaler. This would be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the frequencies supported by SAMA7G5 could be directly received from CPUPLL + master clock prescaler and the extra divider would do no work in case it would be enabled. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: re-factor master clockClaudiu Beznea
Re-factor master clock driver by splitting it into 2 clocks: prescaller and divider clocks. Based on registered clock flags the prescaler's rate could be changed at runtime. This is necessary for platforms supporting DVFS (e.g. SAMA7G5) where master clock could be changed at run-time. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHzClaudiu Beznea
Since CPU PLL feeds both CPU clock and MCK0, MCK0 cannot go higher than 200MHz and MCK0 maximum prescaller is 5 limit the CPU PLL at 1GHz to avoid MCK0 overclocking while CPU PLL is changed by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-10-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: decrease lower limit for MCK0 rateClaudiu Beznea
On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is also changed by DVFS to avoid over/under clocking of MCK0 consumers. The lower limit is changed to be able to set MCK0 accordingly by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: remove mck0 from parent list of other clocksClaudiu Beznea
MCK0 is changed at runtime by DVFS. Due to this, since not all IPs are glitch free aware at MCK0 changes, remove MCK0 from parent list of other clocks (e.g. generic clock, programmable/system clock, MCKX). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-8-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-sam9x60-pll: allow runtime changes for pllClaudiu Beznea
Allow runtime frequency changes for PLLs registered with proper flags. This is necessary for CPU PLL on SAMA7G5 which is used by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristicsEugen Hristev
This SoC has the 5th divisor for the mck0 master clock. Adapt the characteristics accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: add 5th divisor for mck masterEugen Hristev
clk-master can have 5 divisors with a field width of 3 bits on some products. Change the mask and number of divisors accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-5-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DTEugen Hristev
Allow SYSPLL and CPUPLL to be referenced as a PMC_TYPE_CORE clock from phandle in DT. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt commit message, add CPU PLL] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19dt-bindings: clock: at91: add sama7g5 pll definesEugen Hristev
Add SAMA7G5 specific PLL defines to be referenced in a phandle as a PMC_TYPE_CORE clock. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: fix compilation errorClaudiu Beznea
pmc_data_allocate() has been changed. pmc_data_free() was removed. Adapt the code taking this into consideration. With this the programmable clocks were also saved in sama7g5_pmc so that they could be later referenced. Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: Add MODULE_DEVICE_TABLE()Nicolas Saenz Julienne
Add MODULE_DEVICE_TABLE() so as to be able to use the driver as a module. More precisely, for the driver to be loaded automatically at boot. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201202103518.21889-1-nsaenzjulienne@suse.de Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: drop a variable that is assigned to onlyUwe Kleine-König
The third parameter to devm_platform_get_and_ioremap_resource() is used only to provide the used resource. As this variable isn't used afterwards, switch to the function devm_platform_ioremap_resource() which doesn't provide this output parameter. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201120132121.2678997-1-u.kleine-koenig@pengutronix.de Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19net: mvpp2: prs: fix PPPoE with ipv6 packet parseStefan Chulski
Current PPPoE+IPv6 entry is jumping to 'next-hdr' field and not to 'DIP' field as done for IPv4. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Liron Himi <lironh@marvell.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608230266-22111-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-19net: mvpp2: Add TCAM entry to drop flow control pause framesStefan Chulski
Issue: Flow control frame used to pause GoP(MAC) was delivered to the CPU and created a load on the CPU. Since XOFF/XON frames are used only by MAC, these frames should be dropped inside MAC. Fix: According to 802.3-2012 - IEEE Standard for Ethernet pause frame has unique destination MAC address 01-80-C2-00-00-01. Add TCAM parser entry to track and drop pause frames by destination MAC. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608229817-21951-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-19net: mvpp2: disable force link UP during port init procedureStefan Chulski
Force link UP can be enabled by bootloader during tftpboot and breaks NFS support. Force link UP disabled during port init procedure. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-19rtc: pcf2127: only use watchdog when explicitly availableUwe Kleine-König
Most boards using the pcf2127 chip (in my bubble) don't make use of the watchdog functionality and the respective output is not connected. The effect on such a board is that there is a watchdog device provided that doesn't work. So only register the watchdog if the device tree has a "reset-source" property. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [RV: s/has-watchdog/reset-source/] Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201218101054.25416-3-rasmus.villemoes@prevas.dk
2020-12-18Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-17 Sylwester fixes an issue where PF was not properly being rebuilt following VF removal for i40e. Jakub Kicinski fixes a double release of rtnl_lock on iavf_lan_add_device() error for iavf. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: fix double-release of rtnl_lock i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFs ==================== Link: https://lore.kernel.org/r/20201217223418.3134992-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-18vdpa: Use simpler version of ida allocationParav Pandit
vdpa doesn't have any specific need to define start and end range of the device index. Hence use the simper version of the ida allocator. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20201112064005.349268-3-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18vhost scsi: fix error return code in vhost_scsi_set_endpoint()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 25b98b64e284 ("vhost scsi: alloc cmds per vq instead of session") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1607071411-33484-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18virtio_ring: Fix two use after free bugsDan Carpenter
The "vq" struct is added to the "vdev->vqs" list prematurely. If we encounter an error later in the function then the "vq" is freed, but since it is still on the list that could lead to a use after free bug. Fixes: cbeedb72b97a ("virtio_ring: allocate desc state for split ring separately") Reported-by: Robert Buhren <robert.buhren@sect.tu-berlin.de> Reported-by: Felicitas Hetzelt <file@sect.tu-berlin.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8pGaG/zkI3jk8mk@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-12-18virtio_net: Fix error code in probe()Dan Carpenter
Set a negative error code intead of returning success if the MTU has been changed to something invalid. Fixes: fe36cbe0671e ("virtio_net: clear MTU when out of range") Reported-by: Robert Buhren <robert.buhren@sect.tu-berlin.de> Reported-by: Felicitas Hetzelt <file@sect.tu-berlin.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8pGVJSeeCdII1Ys@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-12-18virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed()Dan Carpenter
There is a copy and paste bug in the error handling of this code and it uses "ring_dma_addr" three times instead of "device_event_dma_addr" and "driver_event_dma_addr". Fixes: 1ce9e6055fa0 (" virtio_ring: introduce packed ring support") Reported-by: Robert Buhren <robert.buhren@sect.tu-berlin.de> Reported-by: Felicitas Hetzelt <file@sect.tu-berlin.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8pGRJlEzyn+04u2@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-12-18vdpa/mlx5: Use write memory barrier after updating CQ indexEli Cohen
Make sure to put dma write memory barrier after updating CQ consumer index so the hardware knows that there are available CQE slots in the queue. Failure to do this can cause the update of the RX doorbell record to get updated before the CQ consumer index resulting in CQ overrun. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20201209140004.15892-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18vdpa: split vdpasim to core and net modulesMax Gurtovoy
Introduce new vdpa_sim_net and vdpa_sim (core) drivers. This is a preparation for adding a vdpa simulator module for block devices. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> [sgarzare: various cleanups/fixes] Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-19-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iovStefano Garzarella
vringh_getdesc_iotlb() manages 2 iovs for writable and readable descriptors. This is very useful for the block device, where for each request we have both types of descriptor. Let's split the vdpasim_virtqueue's iov field in out_iov and in_iov to use them with vringh_getdesc_iotlb(). We are using VIRTIO terminology for "out" (readable by the device) and "in" (writable by the device) descriptors. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-18-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18vdpa_sim: make vdpasim->buffer size configurableStefano Garzarella
Allow each device to specify the size of the buffer allocated in vdpa_sim. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-17-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18vdpa_sim: use kvmalloc to allocate vdpasim->bufferStefano Garzarella
The next patch will make the buffer size configurable from each device. Since the buffer could be larger than a page, we use kvmalloc() instead of kmalloc(). Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-16-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18vdpa_sim: set vringh notify callbackStefano Garzarella
Instead of calling the vq callback directly, we can leverage the vringh_notify() function, adding vdpasim_vq_notify() and setting it in the vringh notify callback. Suggested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-15-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18vdpa_sim: add set_config callback in vdpasim_dev_attrStefano Garzarella
The set_config callback can be used by the device to parse the config structure modified by the driver. The callback will be invoked, if set, in vdpasim_set_config() after copying bytes from caller buffer into vdpasim->config buffer. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-14-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18vdpa_sim: add get_config callback in vdpasim_dev_attrStefano Garzarella
The get_config callback can be used by the device to fill the config structure. The callback will be invoked in vdpasim_get_config() before copying bytes into caller buffer. Move vDPA-net config updates from vdpasim_set_features() in the new vdpasim_net_get_config() callback. This is safe since in vdpa_get_config() we already check that .set_features() callback is called before .get_config(). Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-13-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 21:32:49 +0000