summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-05-29cpuidle: Fix three reference count leaksQiushi Wu
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb718348b8" fixed a similar problem. Signed-off-by: Qiushi Wu <wu000273@umn.edu> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-29PCI: vmd: Filter resource type bits from shadow registerJon Derrick
Versions of VMD with the Host Physical Address shadow register use this register to calculate the bus address offset needed to do guest passthrough of the domain. This register shadows the Host Physical Address registers including the resource type bits. After calculating the offset, the extra resource type bits lead to the VMD resources being over-provisioned at the front and under-provisioned at the back. Example: pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit] Expected: pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit] If other devices are mapped in the over-provisioned front, it could lead to resource conflict issues with VMD or those devices. Link: https://lore.kernel.org/r/20200528030240.16024-3-jonathan.derrick@intel.com Fixes: a1a30170138c9 ("PCI: vmd: Fix shadow offsets to reflect spec changes") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-05-29PM: runtime: Replace pm_runtime_callbacks_present()Rafael J. Wysocki
The name of pm_runtime_callbacks_present() is confusing, because it suggests that the device has PM-runtime callbacks if 'true' is returned by that function, but in fact that may not be the case, so replace it with pm_runtime_has_no_callbacks() which is not ambiguous. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29rt2800: enable MFP support unconditionallyRui Salvaterra
This gives us WPA3 support out of the box without having to manually disable hardware crypto. The driver will fall back to software crypto if the connection requires management frame protection. Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200525134906.1672-1-rsalvaterra@gmail.com
2020-05-29vmci_host: get rid of pointless access_ok()Al Viro
get_user_pages_fast() doesn't need the caller to check that. NB: reachable only from ioctl(2) and only under USER_DS Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29hfi1: get rid of pointless access_ok()Al Viro
pin_user_pages_fast() doesn't need that from its caller. NB: only reachable from ->ioctl(), and only under USER_DS Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29usb: get rid of pointless access_ok() callsAl Viro
in all affected cases addresses are passed only to copy_from()_user or copy_to_user(). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29lpfc_debugfs: get rid of pointless access_ok()Al Viro
No, you do NOT need to "protect copy from user" that way. Incidentally, your userland ABI stinks. I understand that you wanted to accept "reset" and "reset\n" as equivalent, but I suspect that accepting "reset this, you !@^!@!" had been an accident. Nothing to do about that now - it is a userland ABI... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29efi_test: get rid of pointless access_ok()Al Viro
really, people - get_user(), copy_from_user(), memdup_user(), etc. all fail if access_ok() does. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29drm_read(): get rid of pointless access_ok()Al Viro
address is passed only to copy_to_user() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29via-pmu: don't bother with access_ok()Al Viro
we are using copy_to_user() for actual copying Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()Al Viro
Contrary to the comments, those do *NOT* verify anything about writability of memory, etc. In all cases addresses are passed only to copy_to_user(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29omapfb: get rid of pointless access_ok() callsAl Viro
address is passed only to copy_to_user() Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29amifb: get rid of pointless access_ok() callsAl Viro
addresses passed only to get_user() and put_user() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()Al Viro
Address is passed to get_user_pages_fast(), which does access_ok(). NB: this is called only from ->ioctl(), and only under USER_DS. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()Al Viro
followed by copy_from_user() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()Al Viro
copy_to_user()/copy_from_user() for everything Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29nvram: drop useless access_ok()Al Viro
we are using copy_to_user()/memdup_user() anyway Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29n_hdlc_tty_read(): remove pointless access_ok()Al Viro
only copy_to_user() is done to the address in question Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29spi: dw: Use regset32 DebugFS method to create regdump fileSerge Semin
DebugFS kernel interface provides a dedicated method to create the registers dump file. Use it instead of creating a generic DebugFS file with manually written read callback function. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-16-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add DMA support to the DW SPI MMIO driverSerge Semin
Since the common code in the spi-dw-dma.c driver is ready to be used by the MMIO driver and now provides a method to generically (on any DT or ACPI-based platforms) retrieve the Tx/Rx DMA channel handlers, we can use it and a set of the common DW SPI DMA callbacks to enable DMA at least for generic "snps,dw-apb-ssi" and "snps,dwc-ssi-1.01a" devices. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-15-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Cleanup generic DW DMA code namingsSerge Semin
Since from now the former Intel MID platform layer is used as a generic DW SPI DMA module, let's alter the internal methods naming to be DMA-related instead of having the "mid_" prefix. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-14-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI coreSerge Semin
Seeing all of the DW SPI driver components like DW SPI DMA/PCI/MMIO depend on the DW SPI core code it's better to use the if-endif conditional kernel config statement to signify that common dependency. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-13-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Remove DW DMA code dependency from DW_DMAC_PCISerge Semin
Since there is a generic method available to initialize the DW SPI DMA interface on any DT and ACPI-based platforms, which in general can be designed with not only DW DMAC but with any DMA engine on board, we can freely remove the CONFIG_DW_DMAC_PCI config from dependency list of CONFIG_SPI_DW_DMA. Especially seeing that we don't use anything DW DMAC specific in the new driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-12-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Move Non-DMA code to the DW PCIe-SPI driverSerge Semin
This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add core suffix to the DW APB SSI core source fileSerge Semin
Generic DMA support is going to be part of the DW APB SSI core object. In order to preserve the kernel loadable module name as spi-dw.ko, let's add the "-core" suffix to the object with generic DW APB SSI code and build it into the target spi-dw.ko driver. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-10-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Fix Rx-only DMA transfersSerge Semin
Tx-only DMA transfers are working perfectly fine since in this case the code just ignores the Rx FIFO overflow interrupts. But it turns out the SPI Rx-only transfers are broken since nothing pushing any data to the shift registers, so the Rx FIFO is left empty and the SPI core subsystems just returns a timeout error. Since DW DMAC driver doesn't support something like cyclic write operations of a single byte to a device register, the only way to support the Rx-only SPI transfers is to fake it by using a dummy Tx-buffer. This is what we intend to fix in this commit by setting the SPI_CONTROLLER_MUST_TX flag for DMA-capable platform. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Use DMA max burst to set the request thresholdsSerge Semin
Each channel of DMA controller may have a limited length of burst transaction (number of IO operations performed at ones in a single DMA client request). This parameter can be used to setup the most optimal DMA Tx/Rx data level values. In order to avoid the Tx buffer overrun we can set the DMA Tx level to be of FIFO depth minus the maximum burst transactions length. To prevent the Rx buffer underflow the DMA Rx level should be set to the maximum burst transactions length. This commit setups the DMA channels and the DW SPI DMA Tx/Rx levels in accordance with these rules. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Parameterize the DMA Rx/Tx burst lengthSerge Semin
It isn't good to have numeric literals in the code especially if there are multiple of them and they are related. Let's replace the Tx and Rx burst level literals with the corresponding constants. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add SPI Rx-done wait method to DMA-based transferSerge Semin
Having any data left in the Rx FIFO after the DMA engine claimed it has finished all DMA transactions is an abnormal situation, since the DW SPI controller driver expects to have all the data being fetched and placed into the SPI Rx buffer at that moment. In case if that has happened we hopefully assume that the DMA engine may still be doing the data fetching, thus we give it sometime to finish. If after a short period of time the data is still left in the Rx FIFO, the driver will give up waiting and return an error indicating that the SPI controller/DMA engine must have hung up or failed at some point of doing their duties. Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support") Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add SPI Tx-done wait method to DMA-based transferSerge Semin
Since DMA transfers are performed asynchronously with actual SPI bus transfers, then even if DMA transactions are finished it doesn't mean all data is actually pushed to the SPI bus. Some data might still be in the controller FIFO. This is specifically true for Tx-only transfers. In this case if the next SPI transfer is recharged while a tail of the previous one is still in FIFO, we'll loose that tail data. In order to fix that problem let's add the wait procedure of the Tx SPI transfer completion after the DMA transactions are finished. Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support") Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Locally wait for the DMA transfers completionSerge Semin
In general each DMA-based SPI transfer can be split up into two stages: DMA data transmission/reception and SPI-bus transmission/reception. DMA asynchronous transactions completion can be tracked by means of the DMA async Tx-descriptor completion callback. But that callback being called indicates that the DMA transfer has been finished, it doesn't mean that SPI data transmission is also done. Moreover in fact it isn't for at least Tx-only SPI transfers. Upon DMA transfer completion some data is left in the Tx FIFO and being pushed out by the SPI controller. So in order to make sure that an SPI transfer is completely pushed to the SPI-bus, the driver has to wait for both DMA transaction and the SPI-bus transmission/reception are finished. Note if there is a way to asynchronously track the former event by means of the DMA async Tx callback, there isn't easy one for the later (IRQ-based solution won't work since SPI controller doesn't notify about Rx FIFO being empty). The DMA transfer completion callback isn't suitable to wait for the SPI controller activity finish either. The callback might (in case of DW DMAC it will) be called in the tasklet context. Waiting for the SPI controller to complete the transfer might take a considerable amount of time since SPI-bus might be pretty slow. In this case delaying the execution in the tasklet atomic context might cause significant system performance drop. So to speak the best option we've got to solve the problem is to consequently wait for both stages being finished in the locally implemented SPI transfer execution procedure even if it costs us of the local wait-function re-implementation. In this case we don't need to use the SPI-core transfer-wait functionality, but we'll make sure that all DMA and SPI-bus transactions are completely finished before the SPI-core transfer_one callback returns. In this commit we provide an implementation of the DMA-transfers completion wait functionality. The DW APB SSI DMA-specific SPI transfer_one function waits for both Tx and Rx DMA transfers being finished, and only then exits with zero returned signalling to the SPI core that the SPI transfer is finished. This implementation is fully equivalent to the currently used DMA-execution-SPI-core-wait algorithm. The SPI-bus transmission/reception wait methods will be added in the follow-up commits. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Return any value retrieved from the dma_transfer callbackSerge Semin
DW APB SSI DMA-part of the driver may need to perform the requested SPI-transfer synchronously. In that case the dma_transfer() callback will return 0 as a marker of the SPI transfer being finished so the SPI core doesn't need to wait and may proceed with the SPI message trasnfers pumping procedure. This will be needed to fix the problem when DMA transactions are finished, but there is still data left in the SPI Tx/Rx FIFOs being sent/received. But for now make dma_transfer to return 1 as the normal dw_spi_transfer_one() method. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Set xfer effective_speed_hzSerge Semin
Seeing DW APB SSI controller doesn't support setting the exactly requested SPI bus frequency, but only a rounded frequency determined by means of the odd-numbered half-worded reference clock divider, it would be good to tune the SPI core up and initialize the current transfer effective_speed_hz. By doing so the core will be able to execute the xfer-related delays with better accuracy. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.8. Major changes: ath10k * SDIO and SNOC are not experimental anymore
2020-05-29comedi: get rid of compat_alloc_user_space() mess in COMEDI_CMD{,TEST} compatAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29comedi: do_cmd_ioctl(): lift copyin/copyout into the callerAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29comedi: do_cmdtest_ioctl(): lift copyin/copyout into the callerAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29comedi: lift copy_from_user() into callers of __comedi_get_user_cmd()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compatAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSN compatAl Viro
Just take copy_from_user() out of do_insn_ioctl() into the caller and have compat_insn() build a native version and pass it to do_insn_ioctl() directly. One difference from the previous commits is that the helper used to convert 32bit variant to native has two users - compat_insn() and compat_insnlist(). The latter will be converted in next commit; for now we simply split the helper in two variants - "userland 32bit to kernel native" and "userland 32bit to userland native". The latter is renamed old get_compat_insn(); it will be gone in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-29Bluetooth: hci_qca: Fix qca6390 enable failure after warm rebootZijun Hu
Warm reboot can not reset controller qca6390 due to lack of controllable power supply, so causes firmware download failure during enable. Fixed by sending VSC EDL_SOC_RESET to reset qca6390 within added device shutdown implementation. Signed-off-by: Zijun Hu <zijuhu@codeaurora.org> Tested-by: Zijun Hu <zijuhu@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-29Merge series "Fix regulators coupling for Exynos5800" from Marek Szyprowski ↵Mark Brown
<m.szyprowski@samsung.com>: Hi! This patchset is another attempt to fix the regulator coupling on Exynos5800/5422 SoCs. Here are links to the previous attempts: https://lore.kernel.org/linux-samsung-soc/20191008101709.qVNy8eijBi0LynOteWFMnTg4GUwKG599n6OyYoX1Abs@z/ https://lore.kernel.org/lkml/20191017102758.8104-1-m.szyprowski@samsung.com/ https://lore.kernel.org/linux-pm/cover.1589528491.git.viresh.kumar@linaro.org/ https://lore.kernel.org/linux-pm/20200528131130.17984-1-m.szyprowski@samsung.com/ The problem is with "vdd_int" regulator coupled with "vdd_arm" on Odroid XU3/XU4 boards family. "vdd_arm" is handled by CPUfreq. "vdd_int" is handled by devfreq. CPUfreq initialized quite early during boot and it starts changing OPPs and "vdd_arm" value. Sometimes CPU activity during boot goes down and some low-frequency OPPs are selected, what in turn causes lowering "vdd_arm". This happens before devfreq applies its requirements on "vdd_int". Regulator balancing code reduces "vdd_arm" voltage value, what in turn causes lowering "vdd_int" value to the lowest possible value. This is much below the operation point of the wcore bus, which still runs at the highest frequency. The issue was hard to notice because in the most cases the board managed to boot properly, even when the regulator was set to lowest value allowed by the regulator constraints. However, it caused some random issues, which can be observed as "Unhandled prefetch abort" or low USB stability. Adding more and more special cases to the generic code has been rejected, so the only way to ensure the desired behavior on Exynos5800-based SoCs is to make a custom regulator coupler driver. Best regards, Marek Szyprowski Patch summary: Marek Szyprowski (2): regulator: extract voltage balancing code to separate function soc: samsung: Add simple voltage coupler for Exynos5800 arch/arm/mach-exynos/Kconfig | 1 + drivers/regulator/core.c | 49 ++++++++------- drivers/soc/samsung/Kconfig | 3 + drivers/soc/samsung/Makefile | 1 + .../soc/samsung/exynos-regulator-coupler.c | 59 +++++++++++++++++++ include/linux/regulator/coupler.h | 8 +++ 6 files changed, 101 insertions(+), 20 deletions(-) create mode 100644 drivers/soc/samsung/exynos-regulator-coupler.c -- 2.17.1 base-commit: 8f3d9f354286745c751374f5f1fcafee6b3f3136
2020-05-29regulator: extract voltage balancing code to the separate functionMarek Szyprowski
Move the coupled regulators voltage balancing code to the separate function and allow to call it from the custom regulator couplers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200529124940.10675-2-m.szyprowski@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29iommu: Fix reference count leak in iommu_group_alloc.Qiushi Wu
kobject_init_and_add() takes reference even when it fails. Thus, when kobject_init_and_add() returns an error, kobject_put() must be called to properly clean up the kobject. Fixes: d72e31c93746 ("iommu: IOMMU Groups") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200527210020.6522-1-wu000273@umn.edu Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-29EDAC/amd64: Remove redundant assignment to variable ret in hw_info_get()Colin Ian King
The variable ret is being assigned with a value that is never read and it is being updated later with a new value. The initialization is redundant so remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200429154847.287001-1-colin.king@canonical.com
2020-05-29Merge remote-tracking branch 'regmap/for-5.8' into regmap-nextMark Brown
2020-05-29Merge remote-tracking branch 'regmap/for-5.7' into regmap-linusMark Brown
2020-05-29Merge series "regmap: provide simple bitops and use them in a driver" from ↵Mark Brown
Bartosz Golaszewski <brgl@bgdev.pl> Bartosz Golaszewski <bgolaszewski@baylibre.com>: From: Bartosz Golaszewski <bgolaszewski@baylibre.com> I noticed that oftentimes I use regmap_update_bits() for simple bit setting or clearing. In this case the fourth argument is superfluous as it's always 0 or equal to the mask argument. This series proposes to add simple bit operations for setting, clearing and testing specific bits with regmap. The second patch uses all three in a driver that got recently picked into the net-next tree. The patches obviously target different trees so - if you're ok with the change itself - I propose you pick the first one into your regmap tree for v5.8 and then I'll resend the second patch to add the first user for these macros for v5.9. v1 -> v2: - convert the new macros to static inline functions v2 -> v3: - drop unneeded ternary operator Bartosz Golaszewski (2): regmap: provide helpers for simple bit operations net: ethernet: mtk-star-emac: use regmap bitops drivers/base/regmap/regmap.c | 22 +++++ drivers/net/ethernet/mediatek/mtk_star_emac.c | 80 ++++++++----------- include/linux/regmap.h | 36 +++++++++ 3 files changed, 93 insertions(+), 45 deletions(-) base-commit: 8f3d9f354286745c751374f5f1fcafee6b3f3136 -- 2.26.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-05-29regmap: provide helpers for simple bit operationsBartosz Golaszewski
In many instances regmap_update_bits() is used for simple bit setting and clearing. In these cases the last argument is redundant and we can hide it with a static inline function. This adds three new helpers for simple bit operations: set_bits, clear_bits and test_bits (the last one defined as a regular function). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200528154503.26304-2-brgl@bgdev.pl Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 22:56:47 +0000