| Age | Commit message (Collapse) | Author |
|---|
|
If USB cable is connected prior to boot, we don't get any interrupts
so we must manually check the VBUS state and report it during probe.
If we don't do it then USB controller will never know that peripheral
cable was connected till the user unplugs and replugs the cable.
Fixes: b7aad8e2685b ("extcon: palmas: Add the support for VBUS detection by using GPIO")
Cc: stable@vger.kernel.org
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
* 'linux-4.7' of git://github.com/skeggsb/linux:
drm/nouveau/iccsense: fix memory leak
drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This reverts commit 1733a2ad36741b1812cf8b3f3037c28d0af53f50.
There is apparently something amiss with the way the TTM code handles
DMA buffers, which the above commit was attempting to work around for
arm64 systems with non-coherent PCI. Unfortunately, this completely
breaks systems *with* coherent PCI (which appear to be the majority).
Booting a plain arm64 defconfig + CONFIG_DRM + CONFIG_DRM_NOUVEAU on
a machine with a PCI GPU having coherent dma_map_ops (in this case a
7600GT card plugged into an ARM Juno board) results in a fatal crash:
[ 2.803438] nouveau 0000:06:00.0: DRM: allocated 1024x768 fb: 0x9000, bo ffffffc976141c00
[ 2.897662] Unable to handle kernel NULL pointer dereference at virtual address 000001ac
[ 2.897666] pgd = ffffff8008e00000
[ 2.897675] [000001ac] *pgd=00000009ffffe003, *pud=00000009ffffe003, *pmd=0000000000000000
[ 2.897680] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[ 2.897685] Modules linked in:
[ 2.897692] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc5+ #543
[ 2.897694] Hardware name: ARM Juno development board (r1) (DT)
[ 2.897699] task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000
[ 2.897711] PC is at __memcpy+0x7c/0x180
[ 2.897719] LR is at OUT_RINGp+0x34/0x70
[ 2.897724] pc : [<ffffff80083465fc>] lr : [<ffffff800854248c>] pstate: 80000045
[ 2.897726] sp : ffffffc9768ab360
[ 2.897732] x29: ffffffc9768ab360 x28: 0000000000000001
[ 2.897738] x27: ffffffc97624c000 x26: 0000000000000000
[ 2.897744] x25: 0000000000000080 x24: 0000000000006c00
[ 2.897749] x23: 0000000000000005 x22: ffffffc97624c010
[ 2.897755] x21: 0000000000000004 x20: 0000000000000004
[ 2.897761] x19: ffffffc9763da000 x18: ffffffc976b2491c
[ 2.897766] x17: 0000000000000007 x16: 0000000000000006
[ 2.897771] x15: 0000000000000001 x14: 0000000000000001
[ 2.897777] x13: 0000000000e31b70 x12: ffffffc9768a0080
[ 2.897783] x11: 0000000000000000 x10: fffffffffffffb00
[ 2.897788] x9 : 0000000000000000 x8 : 0000000000000000
[ 2.897793] x7 : 0000000000000000 x6 : 00000000000001ac
[ 2.897799] x5 : 00000000ffffffff x4 : 0000000000000000
[ 2.897804] x3 : 0000000000000010 x2 : 0000000000000010
[ 2.897810] x1 : ffffffc97624c010 x0 : 00000000000001ac
...
[ 2.898494] Call trace:
[ 2.898499] Exception stack(0xffffffc9768ab1a0 to 0xffffffc9768ab2c0)
[ 2.898506] b1a0: ffffffc9763da000 0000000000000004 ffffffc9768ab360 ffffff80083465fc
[ 2.898513] b1c0: ffffffc976801e00 ffffffc9762b8000 ffffffc9768ab1f0 ffffff80080ec158
[ 2.898520] b1e0: ffffffc9768ab230 ffffff8008496d04 ffffffc975ce6d80 ffffffc9768ab36e
[ 2.898527] b200: ffffffc9768ab36f ffffffc9768ab29d ffffffc9768ab29e ffffffc9768a0000
[ 2.898533] b220: ffffffc9768ab250 ffffff80080e70c0 ffffffc9768ab270 ffffff8008496e44
[ 2.898540] b240: 00000000000001ac ffffffc97624c010 0000000000000010 0000000000000010
[ 2.898546] b260: 0000000000000000 00000000ffffffff 00000000000001ac 0000000000000000
[ 2.898552] b280: 0000000000000000 0000000000000000 fffffffffffffb00 0000000000000000
[ 2.898558] b2a0: ffffffc9768a0080 0000000000e31b70 0000000000000001 0000000000000001
[ 2.898566] [<ffffff80083465fc>] __memcpy+0x7c/0x180
[ 2.898574] [<ffffff800853e164>] nv04_fbcon_imageblit+0x1d4/0x2e8
[ 2.898582] [<ffffff800853d6d0>] nouveau_fbcon_imageblit+0xd8/0xe0
[ 2.898591] [<ffffff80083c4db4>] soft_cursor+0x154/0x1d8
[ 2.898598] [<ffffff80083c47b4>] bit_cursor+0x4fc/0x538
[ 2.898605] [<ffffff80083c0cfc>] fbcon_cursor+0x134/0x1a8
[ 2.898613] [<ffffff800841c280>] hide_cursor+0x38/0xa0
[ 2.898620] [<ffffff800841d420>] redraw_screen+0x120/0x228
[ 2.898628] [<ffffff80083bf268>] fbcon_prepare_logo+0x370/0x3f8
[ 2.898635] [<ffffff80083bf640>] fbcon_init+0x350/0x560
[ 2.898641] [<ffffff800841c634>] visual_init+0xac/0x108
[ 2.898648] [<ffffff800841df14>] do_bind_con_driver+0x1c4/0x3a8
[ 2.898655] [<ffffff800841e4f4>] do_take_over_console+0x174/0x1e8
[ 2.898662] [<ffffff80083bf8c4>] do_fbcon_takeover+0x74/0x100
[ 2.898669] [<ffffff80083c3e44>] fbcon_event_notify+0x8cc/0x920
[ 2.898680] [<ffffff80080d7e38>] notifier_call_chain+0x50/0x90
[ 2.898685] [<ffffff80080d8214>] __blocking_notifier_call_chain+0x4c/0x90
[ 2.898691] [<ffffff80080d826c>] blocking_notifier_call_chain+0x14/0x20
[ 2.898696] [<ffffff80083c5e1c>] fb_notifier_call_chain+0x1c/0x28
[ 2.898703] [<ffffff80083c81ac>] register_framebuffer+0x1cc/0x2e0
[ 2.898712] [<ffffff800845da80>] drm_fb_helper_initial_config+0x288/0x3e8
[ 2.898719] [<ffffff800853da20>] nouveau_fbcon_init+0xe0/0x118
[ 2.898727] [<ffffff800852d2f8>] nouveau_drm_load+0x268/0x890
[ 2.898734] [<ffffff8008466e24>] drm_dev_register+0xbc/0xc8
[ 2.898740] [<ffffff8008468a88>] drm_get_pci_dev+0xa0/0x180
[ 2.898747] [<ffffff800852cb28>] nouveau_drm_probe+0x1a0/0x1e0
[ 2.898755] [<ffffff80083a32e0>] pci_device_probe+0x98/0x110
[ 2.898763] [<ffffff800858e434>] driver_probe_device+0x204/0x2b0
[ 2.898770] [<ffffff800858e58c>] __driver_attach+0xac/0xb0
[ 2.898777] [<ffffff800858c3e0>] bus_for_each_dev+0x60/0xa0
[ 2.898783] [<ffffff800858dbc0>] driver_attach+0x20/0x28
[ 2.898789] [<ffffff800858d7b0>] bus_add_driver+0x1d0/0x238
[ 2.898796] [<ffffff800858ed50>] driver_register+0x60/0xf8
[ 2.898802] [<ffffff80083a20dc>] __pci_register_driver+0x3c/0x48
[ 2.898809] [<ffffff8008468eb4>] drm_pci_init+0xf4/0x120
[ 2.898818] [<ffffff8008c56fc0>] nouveau_drm_init+0x21c/0x230
[ 2.898825] [<ffffff80080829d4>] do_one_initcall+0x8c/0x190
[ 2.898832] [<ffffff8008c31af4>] kernel_init_freeable+0x14c/0x1f0
[ 2.898839] [<ffffff80088a0c20>] kernel_init+0x10/0x100
[ 2.898845] [<ffffff8008085e10>] ret_from_fork+0x10/0x40
[ 2.898853] Code: a88120c7 a8c12027 a88120c7 a8c12027 (a88120c7)
[ 2.898871] ---[ end trace d5713dcad023ee04 ]---
[ 2.898888] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
In a toss-up between the GPU seeing stale data artefacts on some systems
vs. catastrophic kernel crashes on other systems, the latter would seem
to take precedence, so revert this change until the real underlying
problem can be fixed.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
[acourbot@nvidia.com: port to Nouveau tree, remove bits in lib/]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
to handle pptable format change on Polaris boards
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function geneve_dev_create_fb() (only used by ovs) never calls
rtnl_configure_link(). The consequence is that dev->rtnl_link_state is
never set to RTNL_LINK_INITIALIZED.
During the deletion phase, the function rollback_registered_many() sends
a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED.
Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.")
CC: Pravin B Shelar <pshelar@nicira.com>
CC: Jesse Gross <jesse@nicira.com>
CC: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function vxlan_dev_create() (only used by ovs) never calls
rtnl_configure_link(). The consequence is that dev->rtnl_link_state is
never set to RTNL_LINK_INITIALIZED.
During the deletion phase, the function rollback_registered_many() sends
a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED.
Note that the function vxlan_dev_create() is moved after the rtnl stuff so
that vxlan_dellink() can be called in this function.
Fixes: dcc38c033b32 ("openvswitch: Re-add CONFIG_OPENVSWITCH_VXLAN")
CC: Thomas Graf <tgraf@suug.ch>
CC: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After ipgre_newlink()/geneve_configure() call, the netdev is registered.
Fixes: 7e059158d57b ("vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices")
CC: David Wragg <david@weave.works>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The untagged command case in the 53c700 driver has been broken since
host wide tags were enabled because the replaced scsi_find_tag()
function had a special case for the tag value SCSI_NO_TAG to retrieve
sdev->current_cmnd. The replacement function scsi_host_find_tag() has
no such special case and returns NULL causing untagged commands to
trigger a BUG() in the driver. Inspection shows that the 53c700 is the
only driver using this SCSI_NO_TAG case, so a local fix in the driver
suffices to fix this problem globally.
Fixes: 64d513ac31b - "scsi: use host wide tags by default"
Cc: stable@vger.kernel.org # 4.4+
Reported-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch.
Fixes: 91a25e463130 ("drm/dp/mst: deallocate payload on port destruction")
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Cc: stable@vger.kernel.org
Cc: Mykola Lysenko <Mykola.Lysenko@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
|
|
drm_crtc_helper_set_config only potentially touches connector->encoder
and encoder->crtc, so we only have to store those for all connectors
and encoders, respectively.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
drm_crtc_helper_set_config
Since commit 0955c1250e96 ("drm/crtc: take references to connectors used
in a modeset. (v2)"), the reference counts of all connectors in the
drm_mode_set given to drm_crtc_helper_set_config are incremented, and then
the reference counts of all connectors are decremented on success, but in a
temporary copy of the connector structure. This leads to the following
error after the first modeset on imx-drm:
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = ad8c4000
[00000004] *pgd=3d9c5831, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 190 Comm: kmsfb-manage Not tainted 4.7.0-rc1+ #657
Hardware name: Freescale i.MX6 Quad/DualLit: [<80506098>] lr : [<80252e94>] psr: 200c0013
sp : adca7ca8 ip : adca7b90 fp : adca7cd4
r10: 00000000 r9 : 00000100 r8 : 00000200
r7 : af3c9800 r6 : aded7848 r5 : aded7800 r4 : 00000000
r3 : af3ca058 r2 : 00000200 r1 : af3ca058 r0 : 00000000
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 3d8c404a DAC: 00000051
Process kmsfb-manage (pid: 190, stack limit = 0xadca6210)
Stack: (0xadca7ca8 to 0xadca8000)
7ca0: 805190e0 aded7800 aded7820 80501a88 8155a290 af3c9c6c
7cc0: adca7ddc 0000000f adca7cec adca7cd8 80519104 80506044 805190e0 aded7800
7ce0: adca7d04 adca7cf0 80501ac0 805190ec aded7820 aded7814 adca7d24 adca7d08
7d00: 804fdb80 80501a94 aded7800 af3ca010 aded7afc af3c9c60 adca7d94 adca7d28
7d20: 804e3518 804fdb20 00000000 af3c9b1c adca7d50 81506f44 00000000 8093c500
7d40: af3c9c6c ae4f2ca8 ae4f2c18 00000000 00000000 ae637f00 00000000 aded7800
7d60: 00000001 af3c9800 af23c300 ae77fcc0 ae4f2c18 00000001 af3c9800 8155a290
7d80: af1af700 adca6000 adca7db4 adca7d98 804fea6c 804e2de4 adca7e50 adb3d940
7da0: 00000001 af3c9800 adca7e24 adca7db8 8050440c 804fea0c ae77fcc0 00000003
7dc0: adca7e24 adb3d940 af1af700 ae77fcc0 ae77fccc ae4f2c18 8083d44c ae77fcc0
7de0: ae4002 80d03040 adca7e64 adca7e40 adca7e50 80503f08
7e40: 7ebd5630 adca7e50 00000068 c06864a2 7ebd5be8 00000000 00000001 00000018
7e60: 00000026 00000000 00000000 00000000 00000001 000115bc 05010500 05a0059f
7e80: 03200000 03360321 00000337 0000003c 00000000 00000040 30383231 30303878
7ea0: 00000000 00000000 00000000 00000000 00000000 00000000 80173058 80172e30
7ec0: 80d77d32 00004000 adf7d900 00000003 00000000 7ebd5630 af342bb0 adfe3b80
7ee0: 80272f50 00000003 adca6000 00000000 adca7f7c adca7f00 802725ec 804f52cc
7f00: 802809cc 80178450 00000000 00000000 80280880 80145904 adb3d8c0 adf7d990
7f20: ffffffff 00000003 00004000 01614c10 c06864a2 00000003 adca6000 00000000
7f40: adca7f6c adca7f50 80280b04 8028088c 000115bc adfe3b81 7ebd5630 adfe3b80
7f60: c06864a2 00000003 adca6000 00000000 adca7fa4 adca7f80 80272f50 80272548
7f80: 000115bc 00017050 00000001 01614c10 00000036 801089e4 00000000 adca7fa8
7fa0: 80108840 80272f18 00017050 00000001 00000003 c06864a2 7ebd5630 000115bc
7fc0: 00017050 00000001 01614c10 00000036 00000003 00000000 00000026 00000018
7fe0: 00016f38 7ebd562c 0000b5e9 76ef31e6 400c0030 00000003 ff5f37db bfe7dd4d
Backtrace:
[<80506038>] (drm_connector_cleanup) from [<80519104>] (dw_hdmi_connector_destroy+0x24/0x28)
r10:0000000f r9:adca7ddc r8:af3c9c6c r7:8155a290 r6:80501a88 r5:aded7820
r4:aded7800 r3:805190e0
[<805190e0>] (dw_hdmi_connector_destroy) from [<80501ac0>] (drm_connector_free+0x38/0x3c)
r4:aded7800 nreference) from [<804e3518>] (drm_crtc_helper_set_config+0x740/0xbf4)
r6:af3c9c60 r5:aded7afc r4:af3ca010 r3:aded7800
[<804e2dd8>] (drm_crtc_helper_set_config) from [<804fea6c>] (drm_mode_set_config_internal+0x6c/0xf4)
r10:adca6000 r9:af1af700 r8:8155a290 r7:af3c9800 r6:00000001 r5:ae4f2c18
r4:ae77fcc0
[<804fea00>] (drm_mode_set_config_internal) from [<8050440c>] (drm_mode_setcrtc+0x504/0x57c)
r7:af3c9800 r6:00000001 r5:adb3d940 r4:adca7e50
[<80503f08>] (drm_mode_setcrtc) from [<804f5404>] (drm_ioctl+0x144/0x4dc)
r10:ada2e000 r9:000000a2 r8:af3c9800 r7:8155a290 r6:809320b4 r5:00000051
r4:adca7e50
[<804f52c0>] (drm_ioctl) from [<802725ec>] (do_vfs_ioctl+0xb0/0x9d0)
r10:00000000 r9:adca6000 r8:00000003 r7:80272f50 r6:adfe3b80 r5:af342bb0
r4:7ebd5630
[<8027253c>] (do_vfs_ioctl) from [<80272f50>] (SyS_ioctl+0x44/0x6c)
r10:00000000 r9:adca6000 r8:00000003 r7:c06864a2 r6:adfe3b80 r5:7ebd5630
r4:adfe3b81
[<80272f0c>] (SyS_ioctl) from [<80108840>] (ret_fast_syscall+0x0/0x1c)
r8:801089e4 r7:00000036 r6:01614c10 r5:00000001 r4:00017050 r3:000115bc
Code: 0a00000c e5932004 e1a01003 e1a0a004 (e5842004)
---[ end trace 9a7257572ccacb16 ]---
Only the reference count of connectors that weren't previously bound to
an encoder should be incremented after a call to drm_crtc_helper_set_config.
And only the reference count of connectors that were previously bound to
an encoder and are unbound afterwards should ever be decremented.
The reference counts of the temporary copies in the save_connectors
should not be touched at all.
This patch fixes the above error by only incrementing the reference count
of those connectors in the set that are initially not bound to any encoder,
and also by restoring the reference count of only those connectors in the
set in the failure case.
"Note that this can only be hit when fbdev emulation is disabled, since
then the refcount drops from 1 to 0 and we call the connector destroy
functions on the backup copy, which eventually results in tears. With
fbdev emulation the refcount only goes down from 2 to 1 ever. And since we
unconditionally increment the refcount on the real object, the refcount of
that will slowly increase. The backup connector's refcount doesn't matter,
since we kfree() that either way in the end of
drm_crtc_helper_set_config()."
Fixes: 0955c1250e96 ("drm/crtc: take references to connectors used in a modeset. (v2)")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
"Pretty much all regression fixes, or black screens."
* tag 'drm-intel-fixes-2016-06-14' of git://anongit.freedesktop.org/drm-intel:
drm/i915/ilk: Don't disable SSC source if it's in use
drm/i915: Extract physical display dimensions from VBT
drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
drm/i915: Only ignore eDP ports that are connected
drm/i915: Silence "unexpected child device config size" for VBT on 845g
drm/i915: Fix NULL pointer deference when out of PLLs in IVB
|
|
acpi_hw_write()"
Revert commit 66b1ed5aa8dd "ACPICA: ACPI 2.0, Hardware: Add
access_width/bit_offset support for acpi_hw_write()" that is reported
to break suspend-to-RAM (ACPI S3) on one system.
The root cause of the failure is a wrong access width value for one of
the involved registers provided by the ACPI tables, but before commit
66b1ed5aa8dd that value was not taken into account at all and things
worked.
Fixes: 66b1ed5aa8dd "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()"
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The maximum turbo P-State used by the intel_pstate driver may be
limited by ACPI _PSS table entry 0. After commit 9522a2ff9cde
(cpufreq: intel_pstate: Enforce _PPC limits), the maximum performance
on servers will be capped by the _PSS table entry 0 by default.
Even though that is formally correct, it may lead to preformance
regressions in some cases. Namely, if the _PSS table entry 0 is
not the maximum turbo P-State, performance measured after commit
9522a2ff9cde will not match the performance measured before that
commit on the same system.
For this reason, modify the code to always use the maximum turbo
frequency as the one that corresponds to _PSS table entry 0 if turbo
is enabled in the BIOS. This way, the performance levels from
before commit 9522a2ff9cde will be restored on the affected systems.
Fixes: 9522a2ff9cde (cpufreq: intel_pstate: Enforce _PPC limits)
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw : Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Thanks to Ville Syrjälä for pointing me towards the cause of this issue.
Unfortunately one of the sideaffects of having the refclk for a DPLL set
to SSC is that as long as it's set to SSC, the GPU will prevent us from
powering down any of the pipes or transcoders using it. A couple of
BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL
configurations. This causes issues on the first modeset, since we don't
expect SSC to be left on and as a result, can't successfully power down
the pipes or the transcoders using it. Here's an example from this Dell
OptiPlex 990:
[drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled
[drm:intel_modeset_init] 2 display pipes available.
[drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
[drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:intel_crt_reset] crt adpa set to 0xf40000
[drm:intel_dp_init_connector] Adding DP connector on port C
[drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0
[drm:ironlake_init_pch_refclk] Disabling SSC entirely
… later we try committing the first modeset …
[drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A
[drm:intel_dump_pipe_config] cpu_transcoder: A
…
[drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07
[drm:intel_dump_pipe_config] planes on this crtc
[drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
[drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258
[drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600
[drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
[drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
[drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A
[drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A
[drm:intel_disable_pipe] disabling pipe A
------------[ cut here ]------------
WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915]
pipe_off wait timed out
…
---[ end trace 94fc8aa03ae139e8 ]---
[drm:intel_dp_link_down]
[drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A
Later modesets succeed since they reset the DPLL's configuration anyway,
but this is enough to get stuck with a big fat warning in dmesg.
A better solution would be to add refcounts for the SSC source, but for
now leaving the source clock on should suffice.
Changes since v4:
- Fix calculation of final for systems with LVDS panels (fixes BUG() on
CI test suite)
Changes since v3:
- Move temp variable into loop
- Move checks for using_ssc_source to after we've figured out has_ck505
- Add using_ssc_source to debug output
Changes since v2:
- Fix debug output for when we disable the CPU source
Changes since v1:
- Leave the SSC source clock on instead of just shutting it off on all
of the DPLL configurations.
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The comment is wrong, glue is devm_kzalloc-ed mem attached to the
"allwinner,sun4i-a10-musb" compatible platform-dev. Where as
glue->musb_pdev is a newly created "musb-hdrc" platform-dev.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[b-liu@ti.com: revise subject prefix]
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Stop using the return value of platform_device_register_full() to get to
the struct musb in sunxi_musb_work(). If a gadget has been registered
(insmod-ed) before the musb driver, then musb_start will get called
from the musb_core probe function and sunxi_musb_work() may run before
platform_device_register_full() has returned.
Instead store a pointer to struct musb in struct sunxi_glue when
sunxi_musb_enable gets called. Note that sunxi_musb_enable always gets
called before sunxi_musb_work() can run.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[b-liu@ti.com: revise subject prefix]
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 26c5f03 uses a new skb allocator to avoid the RFD overflow
issue.
But from debugging without datasheet, we found the error always
happen when the DMA RX address is set to 0x....fc0, which is very
likely to be a HW/silicon problem.
So one idea is instead of adding a new allocator, why not just
hitting the right target by avaiding the error-prone DMA address?
This patch will actually
* Remove the commit 26c5f03
* Apply rx skb with 64 bytes longer space, and if the allocated skb
has a 0x...fc0 address, it will use skb_resever(skb, 64) to
advance the address, so that the RX overflow can be avoided.
In theory this method should also apply to atl1c driver, which
I can't find anyone who can help to test on real devices.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Tested-by: Ole Lukoie <olelukoie@mail.ru>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Configuring the PHY LED registers for the Marvell 88E1510 and others is
not possible, because regardless of the values in marvell,reg-init, it
is later overridden in m88e1121_config_aneg with a non-standard default.
This patch moves that default configuration to .config_init to allow
setting the LED configuration through marvell,reg-init in the device
tree, which should override said default if it exists.
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change power_supply_read_temp() to use power_supply_get_property()
so that it will check the use_cnt and ensure it is > 0. The use_cnt
will be incremented at the end of __power_supply_register, so this
will block to case where get_property can be called before the supply
is fully registered. This fixes the issue show in the stack below:
[ 1.452598] power_supply_read_temp+0x78/0x80
[ 1.458680] thermal_zone_get_temp+0x5c/0x11c
[ 1.464765] thermal_zone_device_update+0x34/0xb4
[ 1.471195] thermal_zone_device_register+0x87c/0x8cc
[ 1.477974] __power_supply_register+0x364/0x424
[ 1.484317] power_supply_register_no_ws+0x10/0x18
[ 1.490833] bq27xxx_battery_setup+0x10c/0x164
[ 1.497003] bq27xxx_battery_i2c_probe+0xd0/0x1b0
[ 1.503435] i2c_device_probe+0x174/0x240
[ 1.509172] driver_probe_device+0x1fc/0x29c
[ 1.515167] __driver_attach+0xa4/0xa8
[ 1.520643] bus_for_each_dev+0x58/0x98
[ 1.526204] driver_attach+0x20/0x28
[ 1.531505] bus_add_driver+0x1c8/0x22c
[ 1.537067] driver_register+0x68/0x108
[ 1.542630] i2c_register_driver+0x38/0x7c
[ 1.548457] bq27xxx_battery_i2c_driver_init+0x18/0x20
[ 1.555321] do_one_initcall+0x38/0x12c
[ 1.560886] kernel_init_freeable+0x148/0x1ec
[ 1.566972] kernel_init+0x10/0xfc
[ 1.572101] ret_from_fork+0x10/0x40
Also make the same change to ps_get_max_charge_cntl_limit() and
ps_get_cur_chrage_cntl_limit() to be safe. Lastly, change the return
value of power_supply_get_property() to -EAGAIN from -ENODEV if
use_cnt <= 0.
Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core")
Cc: stable@vger.kernel.org
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
|
|
The incorrect GPIO mask cause kernel warning, when AR9462 access GPIO11.
Also fix the mask for AR9565.
WARNING: CPU: 1 PID: 199 at ../drivers/net/wireless/ath/ath9k/hw.c:2778 ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw]
CPU: 1 PID: 199 Comm: kworker/u16:9 Not tainted 4.7.0-rc1-next-20160530+ #5
Hardware name: Acer TravelMate P243/BA40_HC, BIOS V1.01 04/20/2012
Workqueue: events_power_efficient rfkill_poll
0000000000000000 ffff88002cf73d28 ffffffff813b8ddc 0000000000000000
0000000000000000 ffff88002cf73d68 ffffffff8107a331 00000ada00000086
ffff880148d9c018 000000000000000b ffff880147e68720 0000000000000200
Call Trace:
[<ffffffff813b8ddc>] dump_stack+0x63/0x87
[<ffffffff8107a331>] __warn+0xd1/0xf0
[<ffffffff8107a41d>] warn_slowpath_null+0x1d/0x20
[<ffffffffc0775b19>] ath9k_hw_gpio_get+0x1a9/0x1b0 [ath9k_hw]
[<ffffffffc047f3e4>] ath9k_rfkill_poll_state+0x34/0x60 [ath9k]
[<ffffffffc06dbb53>] ieee80211_rfkill_poll+0x33/0x40 [mac80211]
[<ffffffffc03ad65a>] cfg80211_rfkill_poll+0x2a/0xc0 [cfg80211]
[<ffffffff817c5514>] rfkill_poll+0x24/0x50
[<ffffffff81093183>] process_one_work+0x153/0x3f0
[<ffffffff8109393b>] worker_thread+0x12b/0x4b0
[<ffffffff81093810>] ? rescuer_thread+0x340/0x340
[<ffffffff81099129>] kthread+0xc9/0xe0
[<ffffffff817d8f1f>] ret_from_fork+0x1f/0x40
[<ffffffff81099060>] ? kthread_park+0x60/0x60
Fixes: a01ab81b09c5 ("ath9k: define correct GPIO numbers and bits mask")
Reported-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
commit 5c86d97bcc1d ("ath10k: combine txrx and replenish task")
introduced deadlock while processing rx in order indication message
for qca6174 based devices. While merging replenish and txrx tasklets,
replenish task should be called out of htt rx ring locking since it
is also try to acquire the same lock.
Unfortunately this issue is not exposed by other solutions (qca988x,
qca99x0 & qca4019), as rx_in_ord_ind message is specific to qca6174
based devices. This patch fixes
=============================================
[ INFO: possible recursive locking detected ]
4.7.0-rc2-wt-ath+ #1353 Tainted: G E
---------------------------------------------
swapper/3/0 is trying to acquire lock:
(&(&htt->rx_ring.lock)->rlock){+.-...}, at: [<f8d7ef19>]
ath10k_htt_rx_msdu_buff_replenish+0x29/0x90 [ath10k_core]
but task is already holding lock:
(&(&htt->rx_ring.lock)->rlock){+.-...}, at: [<f8d82cab>]
ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&htt->rx_ring.lock)->rlock);
lock(&(&htt->rx_ring.lock)->rlock);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by swapper/3/0:
#0: (&(&htt->rx_ring.lock)->rlock){+.-...}, at: [<f8d82cab>]
ath10k_htt_txrx_compl_task+0x21b/0x250 [ath10k_core]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=119151
Fixes: 5c86d97bcc1d ("ath10k: combine txrx and replenish task")
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
When allocating a new device IRQ, gic_dev_domain_alloc() correctly calls
irq_domain_set_hwirq_and_chip(), but gic_irq_domain_alloc() does not. This
means that gic_irq_domain believes all IRQs from the dev domain have an
hwirq of 0 and creates incorrect mappings in the linear_revmap. As
gic_irq_domain is a parent of the gic_dev_domain, this leads to an
inability to boot on devices with a GIC. Excerpt of the error:
[ 2.297649] irq 0: nobody cared (try booting with the "irqpoll" option)
...
[ 2.436963] handlers:
[ 2.439492] Disabling IRQ #0
Fix this by calling irq_domain_set_hwirq_and_chip() for both the dev and
irq domain.
Now that we are modifying the parent domain, be sure to clear it up in
case of an allocation error.
Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain")
Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain")
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Tested-by: Govindraj Raja <Govindraj.Raja@imgtec.com> # On Pistachio SoC
Reviewed-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1464001552-31174-1-git-send-email-harvey.hunt@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over
1MHz SPI bus takes way longer than that. Calculate the timeout from the
actual time the transfer is supposed to take and multiply by 2 for good
measure.
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
When testing SPI without DMA I noticed that filling the FIFO on the
spi controller causes timeout.
Always leave room for one byte in the FIFO.
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
The PWM device exposed by the HLCDC IP is configured with an inverted
polarity by default. Registering the PWM chip with the normal polarity
was not a problem before commit 42e8992c58d4 ("pwm: Add core
infrastructure to allow atomic updates") because the ->set_polarity()
hook was called no matter the current polarity state, but this is no longer
the case.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Directly accessing inode fields bypasses ->getattr()
and can cause problems when the underlying filesystem
does not have the default ->getattr() implementation.
So instead of obtaining the backing inode via d_backing_inode()
use vfs_getattr() and obtain what we need from the kstat struct.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This reverts commit 87f15d4add758fb7fc76655721af94be57a4c17d.
vfs_stat() can only be used on user supplied buffers.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This reverts commit 322ea0bbf3003df17b6253f76e572c37d79a6810.
vfs_stat() can only be used on user supplied buffers.
UBI's kapi.c is the API to the kernel and therefore vfs_stat()
is inappropriate.
This solves the problem that mounting any UBIFS will immediately
fail with -EINVAL.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Fix warning about tainted kernel because usb-otg-fsm has no license.
WARNING: with this patch usb-otg-fsm module can be loaded
but then the kernel will hang. Tested with a udoo quad board.
Cc: <stable@vger.kernel.org> #v4.1+
Signed-off-by: Oscar <oscar@naiandei.net>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
|
|
Acquire a reference to the carrier's kernel module in bus code, so
it can't be removed from the kernel while it still has a bus and thus
possibly devices attached to it.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mcb_probe() does not aqcuire a reference to the probed device but drops one
when removing the device. As it is actually using the device, it should grab
a reference via get_device().
This could lead to a panic found with a rmmod/modprobe stress test
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Andreas Werner <andreas.werner@men.de>
Tested-by: Andreas Werner <andreas.werner@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 2ba272d7bde27e1db2cf1c6cee49b01b7ea08989.
The issue fixed by this patch is specific to compute rings and the
previous patch was enough. Additionally, this patch as been traced
to strange behavior on some CZ systems so we might as well drop it.
|
|
Wrong operator.
Reported-by: David Binderman <linuxdev.baldrick@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
When executing in a PCI passthrough based virtuzliation environment, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.
Ported from amdgpu commit:
amdgpu: fix asic initialization for virtualized environments
Cc: Andres Rodriguez <andres.rodriguez@amd.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
When executing in a PCI passthrough based virtuzliation environemnt, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.
However, if we are operating in SR-IOV mode it is up to the GIM driver
to manage the asic state, therefore we should not post the card (and
shouldn't be able to do it either).
v2: add missing semi-colon
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Seems to cause problems for some older hardware. Kudos to Thom Kouwenhoven
for working a lot with the PLLs and figuring this out.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Seems r600/r700 does not like hard reset while freezing for hibernation
(regression due to 274ad65c9d02bdcbee9bae045517864c3521d530 which itself
is a fix for hibernation on some GPU families). Until i can debug further
issue with r600, let just disable this for r600/r700 as they are very
similar family and bug affecting one likely affect the other.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'regulator/fix/tps51632' into regulator-linus
|
|
Commit 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for
SMI interfaces") changed handle_new_recv_msgs() to call handle_one_recv_msg()
for a smi_msg while the smi_msg is still connected to waiting_rcv_msgs list.
That could lead to following list corruption problems:
1) low-level function treats smi_msg as not connected to list
handle_one_recv_msg() could end up calling smi_send(), which
assumes the msg is not connected to list.
For example, the following sequence could corrupt list by
doing list_add_tail() for the entry still connected to other list.
handle_new_recv_msgs()
msg = list_entry(waiting_rcv_msgs)
handle_one_recv_msg(msg)
handle_ipmb_get_msg_cmd(msg)
smi_send(msg)
spin_lock(xmit_msgs_lock)
list_add_tail(msg)
spin_unlock(xmit_msgs_lock)
2) race between multiple handle_new_recv_msgs() instances
handle_new_recv_msgs() once releases waiting_rcv_msgs_lock before calling
handle_one_recv_msg() then retakes the lock and list_del() it.
If others call handle_new_recv_msgs() during the window shown below
list_del() will be done twice for the same smi_msg.
handle_new_recv_msgs()
spin_lock(waiting_rcv_msgs_lock)
msg = list_entry(waiting_rcv_msgs)
spin_unlock(waiting_rcv_msgs_lock)
|
| handle_one_recv_msg(msg)
|
spin_lock(waiting_rcv_msgs_lock)
list_del(msg)
spin_unlock(waiting_rcv_msgs_lock)
Fixes: 7ea0ed2b5be8 ("ipmi: Make the message handler easier to use for SMI interfaces")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
[Added a comment to describe why this works.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 3.19
Tested-by: Ye Feng <yefeng.yl@alibaba-inc.com>
|
|
Fixes: 9ae482104cb9 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The hash buffer is really HASH_BLOCK_SIZE bytes, someone
must have thought that memmove takes n*u32 words by mistake.
Tests work as good/bad as before after this patch.
Cc: Joakim Bech <joakim.bech@linaro.org>
Cc: stable@vger.kernel.org
Reported-by: David Binderman <linuxdev.baldrick@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All of the VMX AES ciphers (AES, AES-CBC and AES-CTR) are set at
priority 1000. Unfortunately this means we never use AES-CBC and
AES-CTR, because the base AES-CBC cipher that is implemented on
top of AES inherits its priority.
To fix this, AES-CBC and AES-CTR have to be a higher priority. Set
them to 2000.
Testing on a POWER8 with:
cryptsetup benchmark --cipher aes --key-size 256
Shows decryption speed increase from 402.4 MB/s to 3069.2 MB/s,
over 7x faster. Thanks to Mike Strosaker for helping me debug
this issue.
Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module")
Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When calling ppc-xlate.pl, we pass it either linux-ppc64 or
linux-ppc64le. The script however was expecting linux64le, a result
of its OpenSSL origins. This means we aren't obeying the ppc64le
ABIv2 rules.
Fix this by checking for linux-ppc64le.
Fixes: 5ca55738201c ("crypto: vmx - comply with ABIs that specify vrsave as reserved.")
Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The map_sg callback is missing from arm_smmu_ops, but is required by
iommu.h. Similarly to most other IOMMU drivers, connect it to
default_iommu_map_sg.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This patch adds support to list_voltage callback, so that consumers
like mmc core, can get information of supported voltage range.
Without this patch there is no way for mmc core to know this voltage range.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no reason to destroy channels that are destroyed while
cpdma_ctlr destroy. In this case no need to remember how much
channels where created and destroy them by one, as cpdma_ctlr
destroys all of them.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
