summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-03-07lcs: Return zero from ccwgroup devs set_offline functionKlaus-Dieter Wacker
A return code of non-zero of the devs ccwgroup set_offline function leaves the dev in online state. Having done a partly offlining may leave the dev in unusable state. To make sure the dev is set to offline, zero is returned. A setup trace entry is written in case the offlining steps encountered some trouble. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07qeth: meaningful return code for set_mac_addressUrsula Braun
Setting an invalid mac-address for a qeth layer2 device returns with a strange error code: # ip link set hsi1 address 00:00:00:00:00:01 RTNETLINK answers: Unknown error 18446744073709486085 Problem is caused by wrong usage of the return_code field within structure qeth_ipa_cmd. With this patch the ip command above returns SIOCSIFHWADDR: Invalid argument Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07ctcm: use correct idal word list for ctcmpcBelinda Thompson
Communication Server Linux uses the ctcmpc code of the ctcm driver. Sending problems have shown up caused by a wrong idal word list for the first ccw. Function ctcmpc_chx_txdone() invokes the function to prepare the idal word list without setting an appropriate length for the first ccw, which may lead to an incomplete idal word list. This patch sets the maximum buffer size as data length of the first ccw. Thus correct idal word lists are guaranteed in all cases. Signed-off-by: Belinda Thompson <belindat@us.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07ctcm: make ctcmpc debugging compilableUrsula Braun
ctcmpc debugging can be activated defining constant DEBUGCCW. The debugging part contains wrong checks for 64 bit addresses. Thus the debugging version does not compile. This patch corrects the 64-bit address checks to make it compilable. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Belinda Thompson <belindat@us.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-07qeth: synchronize discipline module loadingFrank Blaschka
During system startup udev may try to configure devices in parallel so we have to synchronize discipline module loading. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012.Eran
The bluetooth module in the Asus UX31/UX21 is based on Atheros AR3012 and requires a firmware to be uploaded before it's usable. output of usb-devices for this module: T: Bus=01 Lev=02 Prnt=02 Port=07 Cnt=03 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3375 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Eran <eran@over-here.org> Tested-by: Michal Labedzki <michal.labedzki@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-08Bluetooth: fix conding style issues all over the treeGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-07PCI: ignore pre-1.1 ASPM quirking when ASPM is disabledMatthew Garrett
Right now we won't touch ASPM state if ASPM is disabled, except in the case where we find a device that appears to be too old to reliably support ASPM. Right now we'll clear it in that case, which is almost certainly the wrong thing to do. The easiest way around this is just to disable the blacklisting when ASPM is disabled. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-03-07Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-03-07regulator: tps65910: Configure correct value for VDDCTRL vout regLaxman Dewangan
As per datasheet, the voltage output is defined as from SEL[6:0] = 3 to 64 (dec) Vout= (SEL[6:0] × 12.5 mV + 562.5 mV) The list_voltage returns the vout as 600mV + selector * 12.5mV and so equivalent VSEL is selector + 3. Adding 3 on selector when configuring VSEL register for VDDCTRL output. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-07dm raid: fix flush supportJonathan E Brassow
Fix dm-raid flush support. Both md and dm have support for flush, but the dm-raid target forgot to set the flag to indicate that flushes should be passed on. (Important for data integrity e.g. with writeback cache enabled.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm raid: set MD_CHANGE_DEVS when rebuildingJonathan E Brassow
The 'rebuild' parameter is used to rebuild individual devices in an array (e.g. resynchronize a RAID1 device or recalculate a parity device in higher RAID). The MD_CHANGE_DEVS flag must be set when this parameter is given in order to write out the superblocks and make the change take immediate effect. The code that handles new devices in super_load already sets MD_CHANGE_DEVS and 'FirstUse'. (The 'FirstUse' flag was being set as a special case for rebuilds in super_init_validation.) Add a condition for rebuilds in super_load to take care of both flags without the special case in 'super_init_validation'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm thin metadata: decrement counter after removing mapped blockJoe Thornber
Correct the number of mapped sectors shown on a thin device's status line by decrementing td->mapped_blocks in __remove() each time a block is removed. Signed-off-by: Joe Thornber <ejt@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm thin metadata: unlock superblock in init_pmd error pathJoe Thornber
If dm_sm_disk_create() fails the superblock must be unlocked. Signed-off-by: Joe Thornber <ejt@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm thin metadata: remove incorrect close_device on creation error pathsMike Snitzer
The __open_device() error paths in __create_thin() and __create_snap() incorrectly call __close_device() even if td was not initialized by __open_device(). Remove this. Also document __open_device() return values, remove a redundant td->changed = 1 in __create_thin(), and insert an additional safeguard against creating an already-existing device. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm flakey: fix crash on read when corrupt_bio_byte not setMike Snitzer
The following BUG is hit on the first read that is submitted to a dm flakey test device while the device is "down" if the corrupt_bio_byte feature wasn't requested when the device's table was loaded. Example DM table that will hit this BUG: 0 2097152 flakey 8:0 2048 0 30 This bug was introduced by commit a3998799fb4df0b0af8271a7d50c4269032397aa (dm flakey: add corrupt_bio_byte feature) in v3.1-rc1. BUG: unable to handle kernel paging request at ffff8801cfce3fff IP: [<ffffffffa008c233>] corrupt_bio_data+0x6e/0xae [dm_flakey] PGD 1606063 PUD 0 Oops: 0002 [#1] SMP ... Call Trace: <IRQ> [<ffffffffa008c2b5>] flakey_end_io+0x42/0x48 [dm_flakey] [<ffffffffa00dca98>] clone_endio+0x54/0xb6 [dm_mod] [<ffffffff81130587>] bio_endio+0x2d/0x2f [<ffffffff811c819a>] req_bio_endio+0x96/0x9f [<ffffffff811c94b9>] blk_update_request+0x1dc/0x3a9 [<ffffffff812f5ee2>] ? rcu_read_unlock+0x21/0x23 [<ffffffff811c96a6>] blk_update_bidi_request+0x20/0x6e [<ffffffff811c9713>] blk_end_bidi_request+0x1f/0x5d [<ffffffff811c978d>] blk_end_request+0x10/0x12 [<ffffffff8128f450>] scsi_io_completion+0x1e5/0x4b1 [<ffffffff812882a9>] scsi_finish_command+0xec/0xf5 [<ffffffff8128f830>] scsi_softirq_done+0xff/0x108 [<ffffffff811ce284>] blk_done_softirq+0x84/0x98 [<ffffffff81048d19>] __do_softirq+0xe3/0x1d5 [<ffffffff8138f83f>] ? _raw_spin_lock+0x62/0x69 [<ffffffff810997cf>] ? handle_irq_event+0x4c/0x61 [<ffffffff8139833c>] call_softirq+0x1c/0x30 [<ffffffff81003b37>] do_softirq+0x4b/0xa3 [<ffffffff81048a39>] irq_exit+0x53/0xca [<ffffffff81398acd>] do_IRQ+0x9d/0xb4 [<ffffffff81390333>] common_interrupt+0x73/0x73 ... Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm io: fix discard supportMilan Broz
This patch fixes a crash by recognising discards in dm_io. Currently dm_mirror can send REQ_DISCARD bios if running over a discard-enabled device and without support in dm_io the system crashes badly. BUG: unable to handle kernel paging request at 00800000 IP: __bio_add_page.part.17+0xf5/0x1e0 ... bio_add_page+0x56/0x70 dispatch_io+0x1cf/0x240 [dm_mod] ? km_get_page+0x50/0x50 [dm_mod] ? vm_next_page+0x20/0x20 [dm_mod] ? mirror_flush+0x130/0x130 [dm_mirror] dm_io+0xdc/0x2b0 [dm_mod] ... Introduced in 2.6.38-rc1 by commit 5fc2ffeabb9ee0fc0e71ff16b49f34f0ed3d05b4 (dm raid1: support discard). Signed-off-by: Milan Broz <mbroz@redhat.com> Cc: stable@kernel.org Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07dm ioctl: do not leak argv if target message only contains whitespaceJesper Juhl
If 'argc' is zero we jump to the 'out:' label, but this leaks the (unused) memory that 'dm_split_args()' allocated for 'argv' if the string being split consisted entirely of whitespace. Jump to the 'out_argv:' label instead to free up that memory. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-07rtl8187: Add AD-HOC supportAttila Fazekas
Add AD-HOC support to the rtl8187 based on the rtl8180 source Signed-off-by: Attila Fazekas <turul64@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07bcma: silence PMU warning for BCM4331Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: make iwl_fill_probe_req staticJohannes Berg
This function is only used in iwl-scan.c, so if we move it up a little in the file it can be made static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: clean up iwl-commands.hJohannes Berg
Do some cleanups here: * remove an unused prototype * remove some unused constants * clean up includes Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: don't include iwl-prph.h everywhereJohannes Berg
It's only needed in a few places. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove PA type configurationJohannes Berg
No need to have a special config variable for the PA type, we can just use the additional NIC config function to config the hardware correctly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove priv from sharedJohannes Berg
Finally nothing needs to access priv from shared any more, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: virtualize nic_configJohannes Berg
The nic_config sets uCode dependent register bits, so it must be virtual in the op_mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move packet to transportJohannes Berg
The base packet structure will (hopefully) be the same for all transports, but what is in it differs. Remove the union of all the possible contents and move the packet itself into the transport header file. This requires changing all users of the union to just use pkt->data. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move irq to PCIeJohannes Berg
Even if the variable might also be used by other transports, there's no need for anything outside of the transport itself to access it, so move it into the private area. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move all uCode load variablesJohannes Berg
All variables related to uCode loading (the waitqueue and done indication) should be in the PCI-E transport's private data as this is transport specific. Move them there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move ucode_owner to privJohannes Berg
The transport doesn't really need to know as we can enforce it in the command wrapper. Move the ucode_owner variable into priv and do all enforcing there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: abstract out notification wait supportJohannes Berg
This will be sharable, but needs to live in the op_mode as it is dependent on command processing. Make a library out of the notification wait code. Since I wrote all of the code originally and only Intel employees changed it, we can also relicense it to dual BSD/GPL. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: fix notification wait bugJohannes Berg
In "iwlwifi: consolidate the start_device flow" Emmanuel added the return if the fw isn't there but forgot to take into account that the struct for notification wait needs to be added only after the check -- fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: constify remaining config dataJohannes Berg
The HW configuration settings base_params, ht_params and bt_params all should be const, make it so. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: put use_rts_for_aggregation into hw_paramsJohannes Berg
The hardware config ht_params shouldn't be modified, so copy the use_rts_for_aggregation parameter into hw_params and use/modify it there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: use watchdog timeout from hw_paramsJohannes Berg
This is the version that can be modified, the config params should be read-only. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: keep plcp_delta_threshold in privJohannes Berg
The base_params shouldn't be writable, so keep a copy of this in priv that can be modified. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove max_txq_num from hw_paramsJohannes Berg
This can be used directly from the config now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07drm/i915: support 32 bit BGR formats in sprite planesJesse Barnes
intel_framebuffer_init does some basic sanity checking of the pixel format, but is used by the plane code in addition to the primary crtc. So it needs to contain any formats used in either place. Add the XBGR8888 format to the checklist so the plane code can use it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-03-07iwlwifi: remove num_of_queues module parameterJohannes Berg
This is a hardware parameter, so it shouldn't be configurable by the user. Users can disable aggregation (which is the only thing affected) with 11n_disable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: clean up iwl-core.h inclusionsJohannes Berg
The transport doesn't need to include iwl-core.h any more. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: virtualize command queue full behaviourJohannes Berg
When the command queue is full, the transport will return -ENOSPC, but the reaction to that depends on the op_mode. Virtualize that, the DVM op_mode checks for CT-kill and restarts the hardware otherwise. We may be able to get rid of this callback by putting the behaviour check into the wrapper but that needs more careful evaluation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: make tracing use device as identifierJohannes Berg
Tracing used the priv pointer as an identifier, which has the problem that we don't have it in all code, and also some people say no pointers should be "leaked" to userspace. Use the device name instead, it is more useful anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move status check functions out of sharedJohannes Berg
They are only used in the DVM op_mode. Also move the rfkill debug macros that depend on them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove shadow_reg_enable from hw_paramsJohannes Berg
There's no need to copy shadow_reg_enable into hw_params since it is a pure hardware parameter that will never change, we can access it from the config directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: remove AMT check from transportJohannes Berg
As iwl_prepare_card_hw() is idempotent (and many cards support AMT anyway) there's no point in calling iwl_prepare_card_hw() only for AMT capable devices -- call it always and simplify the code that way. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: rename ucode.h to fw-file.hJohannes Berg
That name better reflects the contents of the file and the fact that it isn't related to iwl-ucode.c. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move rfkill status handling out of transportJohannes Berg
The transport layer should only check the hardware RF kill status, not impose any policy or reaction based on it, so move that out of it into the op_mode. For now keep the restriction on loading firmware, that will have to be removed later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move mutex out of sharedJohannes Berg
Now the mutex no longer needs to be shared, so move it into iwl_priv. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move lockdep assertion into DVMJohannes Berg
The fact that the mutex must be held is an implementation detail of DVM, but something has to ensure that no two synchronous cmds are submitted concurrently. Move the lockdep assertion into the DVM-specific code, but also make the transport abort if there are two concurrently commands. The assertion is much more useful though as the transport check can only catch it when it actually happens, while the assertion makes sure it can't possibly happen. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07iwlwifi: move RF/CT kill check to command wrapperJohannes Berg
Currently, we cannot send any commands when the uCode is in RF or CT kill, but that will not be true for all new uCode versions, so we need to move the check into the uCode specific code. Also remove the duplicate rfkill check. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-10-01 16:05:13 +0000