| Age | Commit message (Collapse) | Author |
|---|
|
In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry
that we are attempting to steer is already found. This is not the
correct behavior. The return code should be the value/index that
corresponds to the entry. Returning zero all the time causes the
RFS records to be incorrect unless entry '0' is the correct one. As
flows migrate to different cores this can create entries that are not
correct.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: Akshay Navgire <anavgire@purestorage.com>
Signed-off-by: Alex Barba <alex.barba@broadcom.com>
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the error recovery sequence, the rtnl_lock is not held for the
entire duration and some datastructures may be freed during the sequence.
Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure
that the device is fully operational before proceeding to reconfigure
the coalescing settings.
This will fix a possible crash like this:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019
RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en]
Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6
RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5
RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28
RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c
R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0
FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
ethnl_set_coalesce+0x3ce/0x4c0
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? coalesce_fill_reply+0x480/0x480
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? syscall_trace_enter+0x1d3/0x2c0
? __audit_syscall_exit+0x249/0x2a0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f38524163bb
Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the sequence required for PCIE-AER. While slot reset occurs, firmware
might not be ready and the driver needs to check for its recovery. We
also need to remap the health registers for some chips and clear the
resource reservations. The resources will be allocated again during
bnxt_io_resume().
Fixes: fb1e6e562b37 ("bnxt_en: Fix AER recovery.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce bnxt_clear_reservations() to clear the reserved attributes only.
This will be used in the next patch to fix PCI AER handling.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 54cc3dbfc10dc3db7cb1cf49aee4477a8398fbde.
Zev Weiss reports that the reverted patch may cause a regulator
undercount. Here is his report:
... having regulator-dummy set as a supply on my PMBus regulators
(instead of having them as their own top-level regulators without
an upstream supply) leads to enable-count underflow errors when
disabling them:
# echo 0 > /sys/bus/platform/devices/efuse01/state
[ 906.094477] regulator-dummy: Underflow of regulator enable count
[ 906.100563] Failed to disable vout: -EINVAL
[ 136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22
Zev reports that reverting the patch fixes the problem. So let's do that
for now.
Fixes: 54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into macro")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Available sensors are enumerated and reported by the SCMI platform server
using a 16bit identification number; not all such sensors are of a type
supported by hwmon subsystem and, among the supported ones, only a subset
could be temperature sensors that have to be registered with the Thermal
Framework.
Potential clashes between hwmon channels indexes and the underlying real
sensors IDs do not play well with the hwmon<-->thermal bridge automatic
registration routines and could need a sensible number of fake dummy
sensors to be made up in order to keep indexes and IDs in sync.
Avoid to use the hwmon<-->thermal bridge dropping the HWMON_C_REGISTER_TZ
attribute and instead explicit register temperature sensors directly with
the Thermal Framework.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221031114018.59048-1-cristian.marussi@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
At region creation time the next region-id is atomically cached so that
there is predictability of region device names. If that region is
destroyed and then a new one is created the region id increments. That
ends up looking like a memory leak, or is otherwise surprising that
identifiers roll forward even after destroying all previously created
regions.
Try to reuse rather than free old region ids at region release time.
While this fixes a cosmetic issue, the needlessly advancing memory
region-id gives the appearance of a memory leak, hence the "Fixes" tag,
but no "Cc: stable" tag.
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 779dd20cfb56 ("cxl/region: Add region creation support")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752186062.947915.13200195701224993317.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When programming port decode targets, the algorithm wants to ensure that
two devices are compatible to be programmed as peers beneath a given
port. A compatible peer is a target that shares the same dport, and
where that target's interleave position also routes it to the same
dport. Compatibility is determined by the device's interleave position
being >= to distance. For example, if a given dport can only map every
Nth position then positions less than N away from the last target
programmed are incompatible.
The @distance for the host-bridge's cxl_port in a simple dual-ported
host-bridge configuration with 2 direct-attached devices is 1, i.e. An
x2 region divided by 2 dports to reach 2 region targets.
An x4 region under an x2 host-bridge would need 2 intervening switches
where the @distance at the host bridge level is 2 (x4 region divided by
2 switches to reach 4 devices).
However, the distance between peers underneath a single ported
host-bridge is always zero because there is no limit to the number of
devices that can be mapped. In other words, there are no decoders to
program in a passthrough, all descendants are mapped and distance only
starts matters for the intervening descendant ports of the passthrough
port.
Add tracking for the number of dports mapped to a port, and use that to
detect the passthrough case for calculating @distance.
Cc: <stable@vger.kernel.org>
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Fixes: 27b3f8d13830 ("cxl/region: Program target lists")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752185440.947915.6617495912508299445.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When a cxl_nvdimm object goes through a ->remove() event (device
physically removed, nvdimm-bridge disabled, or nvdimm device disabled),
then any associated regions must also be disabled. As highlighted by the
cxl-create-region.sh test [1], a single device may host multiple
regions, but the driver was only tracking one region at a time. This
leads to a situation where only the last enabled region per nvdimm
device is cleaned up properly. Other regions are leaked, and this also
causes cxl_memdev reference leaks.
Fix the tracking by allowing cxl_nvdimm objects to track multiple region
associations.
Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/blob/main/test/cxl-create-region.sh [1]
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Fixes: 04ad63f086d1 ("cxl/region: Introduce cxl_pmem_region objects")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183647.947915.2045230911503793901.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When a region is deleted any targets that have been previously assigned
to that region hold references to it. Trigger those references to
drop by detaching all targets at unregister_region() time.
Otherwise that region object will leak as userspace has lost the ability
to detach targets once region sysfs is torn down.
Cc: <stable@vger.kernel.org>
Fixes: b9686e8c8e39 ("cxl/region: Enable the assignment of endpoint decoders to regions")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183055.947915.17681995648556534844.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Some regions may not have any address space allocated. Skip them when
validating HPA order otherwise a crash like the following may result:
devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9
BUG: kernel NULL pointer dereference, address: 0000000000000000
[..]
RIP: 0010:store_targetN+0x655/0x1740 [cxl_core]
[..]
Call Trace:
<TASK>
kernfs_fop_write_iter+0x144/0x200
vfs_write+0x24a/0x4d0
ksys_write+0x69/0xf0
do_syscall_64+0x3a/0x90
store_targetN+0x655/0x1740:
alloc_region_ref at drivers/cxl/core/region.c:676
(inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850
(inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290
(inlined by) attach_target at drivers/cxl/core/region.c:1410
(inlined by) store_targetN at drivers/cxl/core/region.c:1453
Cc: <stable@vger.kernel.org>
Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166752182461.947915.497032805239915067.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- A pair of tweaks to the EFI random seed code so that externally
provided version of this config table are handled more robustly
- Another fix for the v6.0 EFI variable refactor that turned out to
break Apple machines which don't provide QueryVariableInfo()
- Add some guard rails to the EFI runtime service call wrapper so we
can recover from synchronous exceptions caused by firmware
* tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Recover from synchronous exceptions occurring in firmware
efi: efivars: Fix variable writes with unsupported query_variable_store()
efi: random: Use 'ACPI reclaim' memory for random seed
efi: random: reduce seed size to 32 bytes
efi/tpm: Pass correct address to memblock_reserve
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are not a lot of important fixes for the soc tree yet this time,
but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource
leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller
nodes, CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
URLs"
* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
arm64: dts: juno: Add thermal critical trip points
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
ARM: dts: ux500: Add trips to battery thermal zones
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
...
|
|
The devm_ioremap() function returns NULL on error, it doesn't return
error pointers.
Fixes: 99d9ccd973852 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Link: https://lore.kernel.org/r/20220911060053.123594-1-wupeng58@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We shouldn't be calling runtime PM APIs from within the genpd
enable/disable path for a couple reasons.
First, this causes an AA lockdep splat[1] because genpd can call into
genpd code again while holding the genpd lock.
WARNING: possible recursive locking detected
5.19.0-rc2-lockdep+ #7 Not tainted
--------------------------------------------
kworker/2:1/49 is trying to acquire lock:
ffffffeea0370788 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x24/0x30
but task is already holding lock:
ffffffeea03710a8 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x24/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&genpd->mlock);
lock(&genpd->mlock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/2:1/49:
#0: 74ffff80811a5748 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x320/0x5fc
#1: ffffffc008537cf8 ((work_completion)(&genpd->power_off_work)){+.+.}-{0:0}, at: process_one_work+0x354/0x5fc
#2: ffffffeea03710a8 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x24/0x30
stack backtrace:
CPU: 2 PID: 49 Comm: kworker/2:1 Not tainted 5.19.0-rc2-lockdep+ #7
Hardware name: Google Lazor (rev3 - 8) with KB Backlight (DT)
Workqueue: pm genpd_power_off_work_fn
Call trace:
dump_backtrace+0x1a0/0x200
show_stack+0x24/0x30
dump_stack_lvl+0x7c/0xa0
dump_stack+0x18/0x44
__lock_acquire+0xb38/0x3634
lock_acquire+0x180/0x2d4
__mutex_lock_common+0x118/0xe30
mutex_lock_nested+0x70/0x7c
genpd_lock_mtx+0x24/0x30
genpd_runtime_suspend+0x2f0/0x414
__rpm_callback+0xdc/0x1b8
rpm_callback+0x4c/0xcc
rpm_suspend+0x21c/0x5f0
rpm_idle+0x17c/0x1e0
__pm_runtime_idle+0x78/0xcc
gdsc_disable+0x24c/0x26c
_genpd_power_off+0xd4/0x1c4
genpd_power_off+0x2d8/0x41c
genpd_power_off_work_fn+0x60/0x94
process_one_work+0x398/0x5fc
worker_thread+0x42c/0x6c4
kthread+0x194/0x1b4
ret_from_fork+0x10/0x20
Second, this confuses runtime PM on CoachZ for the camera devices by
causing the camera clock controller's runtime PM usage_count to go
negative after resuming from suspend. This is because runtime PM is
being used on the clock controller while runtime PM is disabled for the
device.
The reason for the negative count is because a GDSC is represented as a
genpd and each genpd that is attached to a device is resumed during the
noirq phase of system wide suspend/resume (see the noirq suspend ops
assignment in pm_genpd_init() for more details). The camera GDSCs are
attached to camera devices with the 'power-domains' property in DT.
Every device has runtime PM disabled in the late system suspend phase
via __device_suspend_late(). Runtime PM is not usable until runtime PM
is enabled in device_resume_early(). The noirq phases run after the
'late' and before the 'early' phase of suspend/resume. When the genpds
are resumed in genpd_resume_noirq(), we call down into gdsc_enable()
that calls pm_runtime_resume_and_get() and that returns -EACCES to
indicate failure to resume because runtime PM is disabled for all
devices.
Upon closer inspection, calling runtime PM APIs like this in the GDSC
driver doesn't make sense. It was intended to make sure the GDSC for the
clock controller providing other GDSCs was enabled, specifically the
MMCX GDSC for the display clk controller on SM8250 (sm8250-dispcc), so
that GDSC register accesses succeeded. That will already happen because
we make the 'dev->pm_domain' a parent domain of each GDSC we register in
gdsc_register() via pm_genpd_add_subdomain(). When any of these GDSCs
are accessed, we'll enable the parent domain (in this specific case
MMCX).
We also remove any getting of runtime PM during registration, because
when a genpd is registered it increments the count on the parent if the
genpd itself is already enabled.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Satya Priya <quic_c_skakit@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Reported-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/CAE-0n52xbZeJ66RaKwggeRB57fUAwjvxGxfFMKOKJMKVyFTe+w@mail.gmail.com [1]
Fixes: 1b771839de05 ("clk: qcom: gdsc: enable optional power domain support")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20221103183030.3594899-1-swboyd@chromium.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for rc4. Misc fixes across rockchip, imx,
amdgpu and i915.
The biggest change is for amdkfd where the trap handler needs an
updated fw from a header which makes it a bit larger. I hadn't noticed
this particular file before so I'm going to figure out what the magic
is for, but the fix should be fine for now.
amdgpu:
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 11.x fixes
- Virtual display fix
- Fail suspend if resources can't be evicted
- SR-IOV fix
- Display PSR fix
amdkfd:
- Fix possible NULL pointer deref
- GC 11.x trap handler fix
i915:
- Add locking around DKL PHY register accesses
- Stop abusing swiotlb_max_segment
- Filter out invalid outputs more sensibly
- Setup DDC fully before output init
- Simplify intel_panel_add_edid_alt_fixed_modes()
- Grab mode_config.mutex during LVDS init to avoid WARNs
rockchip:
- fix probing issues
- fix framebuffer without iommu
- fix vop selection
- fix NULL ptr access
imx:
- Fix Kconfig
- fix mode_valid function"
* tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm: (35 commits)
drm/amdkfd: update GFX11 CWSR trap handler
drm/amd/display: Investigate tool reported FCLK P-state deviations
drm/amd/display: Add DSC delay factor workaround
drm/amd/display: Round up DST_after_scaler to nearest int
drm/amd/display: Use forced DSC bpp in DML
drm/amd/display: Fix DCN32 DSC delay calculation
drm/amdgpu: Disable GPU reset on SRIOV before remove pci.
drm/amdgpu: disable GFXOFF during compute for GFX11
drm/amd: Fail the suspend if resources can't be evicted
drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
drm/amdgpu: correct MES debugfs versions
drm/amdgpu: set fb_modifiers_not_supported in vkms
drm/amd/display: cursor update command incomplete
drm/amd/display: Enable timing sync on DCN32
drm/amd/display: Set memclk levels to be at least 1 for dcn32
drm/amd/display: Update latencies on DCN321
drm/amd/display: Limit dcn32 to 1950Mhz display clock
drm/amd/display: Ignore Cable ID Feature
drm/amd/display: Update DSC capabilitie for DCN314
drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes in clk drivers and some clk rate range fixes in the core as
well:
- Make sure the struct clk_rate_request is more sane
- Remove a WARN_ON that was triggering for clks with no parents that
can change frequency
- Fix bad i2c bus transactions on Renesas rs9
- Actually return an error in clk_mt8195_topck_probe() on an error
path
- Keep the GPU memories powered while the clk isn't enabled on
Qualcomm's sc7280 SoC
- Fix the parent clk for HSCIF modules on Renesas' R-Car V4H SoC"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: Update the force mem core bit for GPU clocks
clk: Initialize max_rate in struct clk_rate_request
clk: Initialize the clk_rate_request even if clk_core is NULL
clk: Remove WARN_ON NULL parent in clk_core_init_rate_req()
clk: renesas: r8a779g0: Fix HSCIF parent clocks
clk: renesas: r8a779g0: Add SASYNCPER clocks
clk: mediatek: clk-mt8195-topckgen: Fix error return code in clk_mt8195_topck_probe()
clk: sifive: select by default if SOC_SIFIVE
clk: rs9: Fix I2C accessors
|
|
According to data sheet SPI_SPD7 should be set to 7.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221104100637.13376-1-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
kmemleak reports after running test_progs:
unreferenced object 0xffff8881b1672dc0 (size 232):
comm "test_progs", pid 394388, jiffies 4354712116 (age 841.975s)
hex dump (first 32 bytes):
e0 84 d7 a8 81 88 ff ff 80 2c 67 b1 81 88 ff ff .........,g.....
00 40 c5 9b 81 88 ff ff 00 00 00 00 00 00 00 00 .@..............
backtrace:
[<00000000c8f01748>] napi_skb_cache_get+0xd4/0x150
[<0000000041c7fc09>] __napi_build_skb+0x15/0x50
[<00000000431c7079>] __napi_alloc_skb+0x26e/0x540
[<000000003ecfa30e>] napi_get_frags+0x59/0x140
[<0000000099b2199e>] tun_get_user+0x183d/0x3bb0 [tun]
[<000000008a5adef0>] tun_chr_write_iter+0xc0/0x1b1 [tun]
[<0000000049993ff4>] do_iter_readv_writev+0x19f/0x320
[<000000008f338ea2>] do_iter_write+0x135/0x630
[<000000008a3377a4>] vfs_writev+0x12e/0x440
[<00000000a6b5639a>] do_writev+0x104/0x280
[<00000000ccf065d8>] do_syscall_64+0x3b/0x90
[<00000000d776e329>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
The issue occurs in the following scenarios:
tun_get_user()
napi_gro_frags()
napi_frags_finish()
case GRO_NORMAL:
gro_normal_one()
list_add_tail(&skb->list, &napi->rx_list);
<-- While napi->rx_count < READ_ONCE(gro_normal_batch),
<-- gro_normal_list() is not called, napi->rx_list is not empty
<-- not ask to complete the gro work, will cause memory leaks in
<-- following tun_napi_del()
...
tun_napi_del()
netif_napi_del()
__netif_napi_del()
<-- &napi->rx_list is not empty, which caused memory leaks
To fix, add napi_complete() after napi_gro_frags().
Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In scenarios where multiple errors have occurred
for a SQ before SW starts handling error interrupt,
SQ_CTX[OP_INT] may get overwritten leading to
NIX_LF_SQ_OP_INT returning incorrect value.
To workaround this read LMT, MNQ and SQ individual
error status registers to determine the cause of error.
Fixes: 4ff7d1488a84 ("octeontx2-pf: Error handling support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move am65_cpsw_nuss_phylink_cleanup() call to after
am65_cpsw_nuss_cleanup_ndev() so phylink is still valid
to prevent the below Segmentation fault on module remove when
first slave link is up.
[ 31.652944] Unable to handle kernel paging request at virtual address 00040008000005f4
[ 31.684627] Mem abort info:
[ 31.687446] ESR = 0x0000000096000004
[ 31.704614] EC = 0x25: DABT (current EL), IL = 32 bits
[ 31.720663] SET = 0, FnV = 0
[ 31.723729] EA = 0, S1PTW = 0
[ 31.740617] FSC = 0x04: level 0 translation fault
[ 31.756624] Data abort info:
[ 31.759508] ISV = 0, ISS = 0x00000004
[ 31.776705] CM = 0, WnR = 0
[ 31.779695] [00040008000005f4] address between user and kernel address ranges
[ 31.808644] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 31.814928] Modules linked in: wlcore_sdio wl18xx wlcore mac80211 libarc4 cfg80211 rfkill crct10dif_ce phy_gmii_sel ti_am65_cpsw_nuss(-) sch_fq_codel ipv6
[ 31.828776] CPU: 0 PID: 1026 Comm: modprobe Not tainted 6.1.0-rc2-00012-gfabfcf7dafdb-dirty #160
[ 31.837547] Hardware name: Texas Instruments AM625 (DT)
[ 31.842760] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 31.849709] pc : phy_stop+0x18/0xf8
[ 31.853202] lr : phylink_stop+0x38/0xf8
[ 31.857031] sp : ffff80000a0839f0
[ 31.860335] x29: ffff80000a0839f0 x28: ffff000000de1c80 x27: 0000000000000000
[ 31.867462] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000a083b98
[ 31.874589] x23: 0000000000000800 x22: 0000000000000001 x21: ffff000001bfba90
[ 31.881715] x20: ffff0000015ee000 x19: 0004000800000200 x18: 0000000000000000
[ 31.888842] x17: ffff800076c45000 x16: ffff800008004000 x15: 000058e39660b106
[ 31.895969] x14: 0000000000000144 x13: 0000000000000144 x12: 0000000000000000
[ 31.903095] x11: 000000000000275f x10: 00000000000009e0 x9 : ffff80000a0837d0
[ 31.910222] x8 : ffff000000de26c0 x7 : ffff00007fbd6540 x6 : ffff00007fbd64c0
[ 31.917349] x5 : ffff00007fbd0b10 x4 : ffff00007fbd0b10 x3 : ffff00007fbd3920
[ 31.924476] x2 : d0a07fcff8b8d500 x1 : 0000000000000000 x0 : 0004000800000200
[ 31.931603] Call trace:
[ 31.934042] phy_stop+0x18/0xf8
[ 31.937177] phylink_stop+0x38/0xf8
[ 31.940657] am65_cpsw_nuss_ndo_slave_stop+0x28/0x1e0 [ti_am65_cpsw_nuss]
[ 31.947452] __dev_close_many+0xa4/0x140
[ 31.951371] dev_close_many+0x84/0x128
[ 31.955115] unregister_netdevice_many+0x130/0x6d0
[ 31.959897] unregister_netdevice_queue+0x94/0xd8
[ 31.964591] unregister_netdev+0x24/0x38
[ 31.968504] am65_cpsw_nuss_cleanup_ndev.isra.0+0x48/0x70 [ti_am65_cpsw_nuss]
[ 31.975637] am65_cpsw_nuss_remove+0x58/0xf8 [ti_am65_cpsw_nuss]
Cc: <Stable@vger.kernel.org> # v5.18+
Fixes: e8609e69470f ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack
offloading context to pass it to the drivers, but leaves it there when
it's done. Clear it with memzero_explicit as soon as it's not needed
anymore.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macsec_is_configured incorrectly uses secy->n_rx_sc to check if some
RXSCs exist. secy->n_rx_sc only counts the number of active RXSCs, but
there can also be inactive SCs as well, which may be stored in the
driver (in case we're disabling offloading), or would have to be
pushed to the device (in case we're trying to enable offloading).
As long as RXSCs active on creation and never turned off, the issue is
not visible.
Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a
secy. This is then used by macsec_send_sci to help decide if we should
add the SCI to the header or not.
This logic is currently broken when we create a new RXSC and turn it
off at creation, as create_rx_sc always sets ->active to true (and
immediately uses that to increment n_rx_sc), and only later
macsec_add_rxsc sets rx_sc->active.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently we get an inconsistent state:
- netlink returns the error to userspace
- the RXSC is installed but not offloaded
Then the device could get confused when we try to add an RXSA, because
the RXSC isn't supposed to exist.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit c850240b6c4132574a00f2da439277ab94265b66.
That commit tried to improve the performance of macsec offload by
taking advantage of some of the NIC's features, but in doing so, broke
macsec offload when the lower device supports both macsec and ipsec
offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP)
were copied from the real device. Since the macsec device doesn't
provide xdo_* ops, the XFRM core rejects the registration of the new
macsec device in xfrm_api_check.
Example perf trace when running
ip link add link eni1np1 type macsec port 4 offload mac
ip 737 [003] 795.477676: probe:xfrm_dev_event__REGISTER name="macsec0" features=0x1c000080014869
xfrm_dev_event+0x3a
notifier_call_chain+0x47
register_netdevice+0x846
macsec_newlink+0x25a
ip 737 [003] 795.477687: probe:xfrm_dev_event__return ret=0x8002 (NOTIFY_BAD)
notifier_call_chain+0x47
register_netdevice+0x846
macsec_newlink+0x25a
dev->features includes NETIF_F_HW_ESP (0x04000000000000), so
xfrm_api_check returns NOTIFY_BAD because we don't have
dev->xfrmdev_ops on the macsec device.
We could probably propagate GSO and a few other features from the
lower device, similar to macvlan. This will be done in a future patch.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the argument struct hnae3_handle *h of function hclge_get_dscp_prio()
can be other client registered in hnae3 layer, we need to transform it
into hnae3_handle of local nic client to get right dscp settings for
other clients.
Fixes: dfea275e06c2 ("net: hns3: optimize converting dscp to priority process of hns3_nic_select_queue()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix build errors when MACSEC=m and OCTEONTX2_PF=y by having
OCTEONTX2_PF depend on MACSEC if it is enabled. By adding
"|| !MACSEC", this means that MACSEC is not required -- it can
be disabled for this driver.
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove':
../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x2fd0): undefined reference to `cn10k_mcs_free'
mips64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify':
../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x4610): undefined reference to `cn10k_handle_mcs_event'
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When support was added for devices using an explicit 3rd barrel switch,
the logic used by devices emulating this feature was broken. The 'if'
statement / block that was introduced only handles the case where the
button is pressed (i.e. 'barrelswitch' and 'barrelswitch2' are both set)
but not the case where it is released (i.e. one or both being cleared).
This results in a BTN_STYLUS3 "down" event being sent when the button
is pressed, but no "up" event ever being sent afterwards.
This patch restores the previously-used logic for determining button
states in the emulated case so that switches are reported correctly
again.
Link: https://github.com/linuxwacom/xf86-input-wacom/issues/292
Fixes: 6d09085b38e5 ("HID: wacom: Adding Support for new usages")
CC: stable@vger.kernel.org #v5.19+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.1
Second set of fixes for v6.1. Some fixes to char type usage in
drivers, memory leaks in the stack and also functionality fixes. The
rt2x00 char type fix is a larger (but still simple) commit, otherwise
the fixes are small in size.
* tag 'wireless-2022-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()
wifi: ath11k: Fix QCN9074 firmware boot on x86
wifi: mac80211: Set TWT Information Frame Disabled bit as 1
wifi: mac80211: Fix ack frame idr leak when mesh has no route
wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit()
wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()
wifi: airo: do not assign -1 to unsigned char
wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support
wifi: cfg80211: Fix bitrates overflow issue
wifi: cfg80211: fix memory leak in query_regdb_file()
wifi: mac80211: fix memory free error when registering wiphy fail
wifi: cfg80211: silence a sparse RCU warning
wifi: rt2x00: use explicitly signed or unsigned types
====================
Link: https://lore.kernel.org/r/20221103125315.04E57C433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"Two driver fixes:
- Fix the PIO mode configuration of the pdc20230 (pata_legacy)
driver. This also removes a compilation warning with clang and W=1
(Sergey)
- Fix devm_platform_ioremap_resource() return value check in the
palmld driver (Yang)"
* tag 'ata-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: palmld: fix return value check in palmld_pata_probe()
ata: pata_legacy: fix pdc20230_set_piomode()
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Add locking around DKL PHY register accesses (Imre Deak)
- Stop abusing swiotlb_max_segment (Robert Beckett)
- Filter out invalid outputs more sensibly (Ville Syrjälä)
- Setup DDC fully before output init (Ville Syrjälä)
- Simplify intel_panel_add_edid_alt_fixed_modes() (Ville Syrjälä)
- Grab mode_config.mutex during LVDS init to avoid WARNs (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2ODlCGM4nACmzsJ@tursulin-desk
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.1-2022-11-02:
amdgpu:
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 11.x fixes
- Virtual display fix
- Fail suspend if resources can't be evicted
- SR-IOV fix
- Display PSR fix
amdkfd:
- Fix possible NULL pointer deref
- GC 11.x trap handler fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103023257.10446-1-alexander.deucher@amd.com
|
|
On ACPI systems (irq_pin_access_method == IRQ_PIN_ACCESS_ACPI_*) the driver
does not reset the controller at probe time, because sometimes the system
firmware loads a config and resetting might loose this config.
On the Nanote UMPC-01 device OTOH the config is in flash of the controller,
the controller needs a reset to load this; and the system firmware does not
reset the controller on a cold boot.
To fix the Nanote UMPC-01 touchscreen not working on a cold boot, try
resetting the controller and then re-reading the config when encountering
a config with 0 width/height/max_touch_num value and the controller has
not already been reset by goodix_ts_probe().
This should be safe to do in general because normally we should never
encounter a config with 0 width/height/max_touch_num. Doing this in
general not only avoids the need for a DMI quirk, but also might help
other systems.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20221025122930.421377-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
"struct_size() + n" may cause a integer overflow,
use size_add() to handle it.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20220927070247.23148-1-yuzhe@nfschina.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- net: several zerocopy flags fixes
- netfilter: fix possible memory leak in nf_nat_init()
- openvswitch: add missing .resv_start_op
Previous releases - regressions:
- neigh: fix null-ptr-deref in neigh_table_clear()
- sched: fix use after free in red_enqueue()
- dsa: fall back to default tagger if we can't load the one from DT
- bluetooth: fix use-after-free in l2cap_conn_del()
Previous releases - always broken:
- netfilter: netlink notifier might race to release objects
- nfc: fix potential memory leak of skb
- bluetooth: fix use-after-free caused by l2cap_reassemble_sdu
- bluetooth: use skb_put to set length
- eth: tun: fix bugs for oversize packet when napi frags enabled
- eth: lan966x: fixes for when MTU is changed
- eth: dwmac-loongson: fix invalid mdio_node"
* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
vsock: fix possible infinite sleep in vsock_connectible_wait_data()
vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
ipv6: fix WARNING in ip6_route_net_exit_late()
bridge: Fix flushing of dynamic FDB entries
net, neigh: Fix null-ptr-deref in neigh_table_clear()
net/smc: Fix possible leaked pernet namespace in smc_init()
stmmac: dwmac-loongson: fix invalid mdio_node
ibmvnic: Free rwi on reset success
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
netfilter: ipset: enforce documented limit to prevent allocating huge memory
isdn: mISDN: netjet: fix wrong check of device registration
...
|
|
The local variable 'vector' must be u32 rather than u8: see the
struct hv_msi_desc3.
'vector_count' should be u16 rather than u8: see struct hv_msi_desc,
hv_msi_desc2 and hv_msi_desc3.
Fixes: a2bad844a67b ("PCI: hv: Fix interrupt mapping for multi-MSI")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221027205256.17678-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add a data structure to represent the reference TSC MSR similar to
other MSRs. This simplifies the code for updating the MSR.
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221027095729.1676394-2-anrayabh@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When this driver is used with a driver that uses preallocated spi_transfer
structs. The speed_hz is halved by every run. This results in:
spi_stm32 44004000.spi: SPI transfer setup failed
ads7846 spi0.0: SPI transfer failed: -22
Example when running with DIV_ROUND_UP():
- First run; speed_hz = 1000000, spi->clk_rate 125000000
div 125 -> mbrdiv = 7, cur_speed = 976562
- Second run; speed_hz = 976562
div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281
- Third run; speed_hz = 488281
div 256,000131072067109 (roundup to 257) and then -EINVAL is returned.
Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the
set speed.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at
runtime_resume") reintroduced the call to clk_set_min_rate in an attempt
to fix the boot without a monitor connected on the RaspberryPi3.
However, that introduced a regression breaking the display output
entirely (black screen but no vblank timeout) on the Pi4.
This is due to the fact that we now have in a typical modeset at boot,
in vc4_hdmi_encoder_pre_crtc_configure(), we have a first call to
clk_set_min_rate() asking for the minimum rate of the HSM clock for our
given resolution, and then a call to pm_runtime_resume_and_get(). We
will thus execute vc4_hdmi_runtime_resume() which, since the commit
mentioned above, will call clk_set_min_rate() a second time with the
absolute minimum rate we want to enforce on the HSM clock.
We're thus effectively erasing the minimum mandated by the mode we're
trying to set. The fact that only the Pi4 is affected is due to the fact
that it uses a different clock driver that tries to minimize the HSM
clock at all time. It will thus lower the HSM clock rate to 120MHz on
the second clk_set_min_rate() call.
The Pi3 doesn't use the same driver and will not change the frequency on
the second clk_set_min_rate() call since it's still within the new
boundaries and it doesn't have the code to minimize the clock rate as
needed. So even though the boundaries are still off, the clock rate is
still the right one for our given mode, so everything works.
There is a lot of moving parts, so I couldn't find any obvious
solution:
- Reverting the original is not an option, as that would break the Pi3
again.
- We can't move the clk_set_min_rate() call in _pre_crtc_configure()
since because, on the Pi3, the HSM clock has the CLK_SET_RATE_GATE
flag which prevents the clock rate from being changed after it's
been enabled. Our calls to clk_set_min_rate() can change it, so they
need to be done before clk_prepare_enable().
- We can't remove the call to clk_prepare_enable() from the
runtime_resume hook to put it into _pre_crtc_configure() either,
since we need that clock to be enabled to access the registers, and
we can't count on the fact that the display will be active in all
situations (doing any CEC operation, or listing the modes while
inactive are valid for example()).
- We can't drop the call to clk_set_min_rate() in
_pre_crtc_configure() since we would need to still enforce the
minimum rate for a given resolution, and runtime_resume doesn't have
access to the current mode, if there's any.
- We can't copy the TMDS character rate into vc4_hdmi and reuse it
since, because it's part of the KMS atomic state, it needs to be
protected by a mutex. Unfortunately, some functions (CEC operations,
mostly) can be reentrant (through the CEC framework) and still need
a pm_runtime_get.
However, we can work around this issue by leveraging the fact that the
clk_set_min_rate() calls set boundaries for its given struct clk, and
that each different clk_get() call will return a different instance of
struct clk. The clock framework will then aggregate the boundaries for
each struct clk instances linked to a given clock, plus its hardware
boundaries, and will use that.
We can thus get an extra HSM clock user for runtime_pm use only, and use
our different clock instances depending on the context: runtime_pm will
use its own to set the absolute minimum clock setup so that we never
lock the CPU waiting for a register access, and the modeset part will
set its requirement for the current resolution. And we let the CCF do
the coordination.
It's not an ideal solution, but it's fairly unintrusive and doesn't
really change any part of the logic so it looks like a rather safe fix.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2136234
Fixes: ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at runtime_resume")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20221021131339.2203291-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
A comment introduced by commit 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link
on hotplug") mentions a drm_atomic_helper_connector_hdmi_reset_link()
function that was part of the earlier versions but got moved internally
and is now named vc4_hdmi_reset_link(). Let's fix the function name.
Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
We access some fields protected by our internal mutex in
vc4_hdmi_reset_link() (saved_adjusted_mode, output_bpc, output_format)
and are calling functions that need to have that lock taken
(vc4_hdmi_supports_scrambling()).
However, the current code doesn't lock that mutex. Let's make sure it
does.
Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1-rc4:
- Small fixes to make rockchip work better.
- Fix imx Kconfig.
- Small fix to imx' mode_valid.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5476ef52-f91a-c2bc-f4b2-d338216d1e11@linux.intel.com
|
|
In current code "plat->mdio_node" is always NULL, the mdio
support is lost as there is no "mdio_bus_data". The original
driver could work as the "mdio" variable is never set to
false, which is described in commit <b0e03950dd71> ("stmmac:
dwmac-loongson: fix uninitialized variable ......"). And
after this commit merged, the "mdio" variable is always
false, causing the mdio supoort logic lost.
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221101060218.16453-1-liupeibao@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Free the rwi structure in the event that the last rwi in the list
processed successfully. The logic in commit 4f408e1fa6e1 ("ibmvnic:
retry reset if there are no other resets") introduces an issue that
results in a 32 byte memory leak whenever the last rwi in the list
gets processed.
Fixes: 4f408e1fa6e1 ("ibmvnic: retry reset if there are no other resets")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221031150642.13356-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
__mdiobus_register+0x49d/0x4e0
fixed_mdio_bus_init+0xd8/0x12d
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function gsm_dlci_t1() is a timer handler that runs in an
atomic context, but it calls "kzalloc(..., GFP_KERNEL)" that
may sleep. As a result, the sleep-in-atomic-context bug will
happen. The process is shown below:
gsm_dlci_t1()
gsm_dlci_open()
gsm_modem_update()
gsm_modem_upd_via_msc()
gsm_control_send()
kzalloc(sizeof(.., GFP_KERNEL) //may sleep
This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to
GFP_ATOMIC in order to mitigate the bug.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20221002040709.27849-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit c9ab053e56ce13a949977398c8edc12e6c02fc95.
The above commit is reverted as it was a prerequisite for tx_mutex
introduction and tx_mutex has been removed as it does not correctly
work in order to protect tx data.
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20221008110221.13645-3-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 902e02ea9385373ce4b142576eef41c642703955.
The above commit is reverted as the usage of tx_mutex seems not to solve
the problem described in 902e02ea9385 ("tty: n_gsm: avoid call of sleeping
functions from atomic context") and just moves the bug to another place.
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20221008110221.13645-2-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The following warning is seen with non-console UART instance when
system hibernates.
[ 37.371969] ------------[ cut here ]------------
[ 37.376599] uart3_root_clk already disabled
[ 37.380810] WARNING: CPU: 0 PID: 296 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0
...
[ 37.506986] Call trace:
[ 37.509432] clk_core_disable+0xa4/0xb0
[ 37.513270] clk_disable+0x34/0x50
[ 37.516672] imx_uart_thaw+0x38/0x5c
[ 37.520250] platform_pm_thaw+0x30/0x6c
[ 37.524089] dpm_run_callback.constprop.0+0x3c/0xd4
[ 37.528972] device_resume+0x7c/0x160
[ 37.532633] dpm_resume+0xe8/0x230
[ 37.536036] hibernation_snapshot+0x288/0x430
[ 37.540397] hibernate+0x10c/0x2e0
[ 37.543798] state_store+0xc4/0xd0
[ 37.547203] kobj_attr_store+0x1c/0x30
[ 37.550953] sysfs_kf_write+0x48/0x60
[ 37.554619] kernfs_fop_write_iter+0x118/0x1ac
[ 37.559063] new_sync_write+0xe8/0x184
[ 37.562812] vfs_write+0x230/0x290
[ 37.566214] ksys_write+0x68/0xf4
[ 37.569529] __arm64_sys_write+0x20/0x2c
[ 37.573452] invoke_syscall.constprop.0+0x50/0xf0
[ 37.578156] do_el0_svc+0x11c/0x150
[ 37.581648] el0_svc+0x30/0x140
[ 37.584792] el0t_64_sync_handler+0xe8/0xf0
[ 37.588976] el0t_64_sync+0x1a0/0x1a4
[ 37.592639] ---[ end trace 56e22eec54676d75 ]---
On hibernating, pm core calls into related hooks in sequence like:
.freeze
.freeze_noirq
.thaw_noirq
.thaw
With .thaw_noirq hook being absent, the clock will be disabled in a
unbalanced call which results the warning above.
imx_uart_freeze()
clk_prepare_enable()
imx_uart_suspend_noirq()
clk_disable()
imx_uart_thaw
clk_disable_unprepare()
Adding the missing .thaw_noirq hook as imx_uart_resume_noirq() will have
the call sequence corrected as below and thus fix the warning.
imx_uart_freeze()
clk_prepare_enable()
imx_uart_suspend_noirq()
clk_disable()
imx_uart_resume_noirq()
clk_enable()
imx_uart_thaw
clk_disable_unprepare()
Fixes: 09df0b3464e5 ("serial: imx: fix endless loop during suspend")
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20221012121353.2346280-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
