summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-03-12media: imx: imx7_mipi_csis: Add greyscale formats supportLaurent Pinchart
Add support for the 8-, 10- and 12-bit greyscale media bus formats, and map them to the CSI-2 RAW8, RAW10 and RAW12 formats respectively. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: imx: imx7_mipi_csis: Print the RESOL_CH0 registerLaurent Pinchart
Add the RESOL_CH0 register to the list of registers printed through the debugfs debug infrastructure for the driver, as it can be useful to verify proper configuration of the CSI-2 receiver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: imx: imx7_mipi_csis: Power off the source when stopping streamingLaurent Pinchart
The .s_stream() implementation incorrectly powers on the source when stopping the stream. Power it off instead. Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: mtk-mdp: Check return value of of_clk_getMatthias Brugger
Check the return value of of_clk_get and print an error message if not EPROBE_DEFER. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: platform: stm32: don't print an error on probe deferralEtienne Carriere
Change stm32-cec driver to not print an error message when the device probe operation is deferred. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: platform: stm32: defer probe for auxiliary clockEtienne Carriere
Change stm32-cec driver to defer probe when auxiliary clock "hdmi-cec" is registered in the system not has not been probed yet. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: xirlink_cit: add missing descriptor sanity checksJohan Hovold
Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays. This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors. Note that the sanity check in cit_get_packet_size() is not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide. Fixes: 659fefa0eb17 ("V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01") Fixes: 59f8b0bf3c12 ("V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 alt setting") Cc: stable <stable@vger.kernel.org> # 2.6.37 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: stv06xx: add missing descriptor sanity checksJohan Hovold
Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays. This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors. Note that the sanity checks in stv06xx_start() and pb0100_start() are not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide. Fixes: 8668d504d72c ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor") Fixes: c0b33bdc5b8d ("[media] gspca-stv06xx: support bandwidth changing") Cc: stable <stable@vger.kernel.org> # 2.6.31 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: ov519: add missing endpoint sanity checksJohan Hovold
Make sure to check that we have at least one endpoint before accessing the endpoint array to avoid dereferencing a NULL-pointer on stream start. Note that these sanity checks are not redundant as the driver is mixing looking up altsettings by index and by number, which need not coincide. Fixes: 1876bb923c98 ("V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge") Fixes: b282d87332f5 ("V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)") Cc: stable <stable@vger.kernel.org> # 2.6.31 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: i2c: s5c73m3: Fix number in auto focus clusterSebastian Gross
As of `s5c73m3.h` the auto focus cluster in `s5c73m3_ctrls` has 5 and not 6 controls. Signed-off-by: Sebastian Gross <sebastian.gross@emlix.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: videobuf2-core: fix dprintk levelAlexandre Courbot
This dprintk is supposed to be informational, not an error. Set it to the same level as the other messages related to memory allocations so the kernel log does not get filled by messages during normal operation. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: imx214: Remove redundant codeRicardo Ribalda Delgado
The pad is now checked by v4l2_subdev_call_wappers call_g_frame_interval-> check_frame_interval-> check_pad Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: i2c: ov5695: Fix power on and off sequencesDongchun Zhu
From the measured hardware signal, OV5695 reset pin goes high for a short period of time during boot-up. From the sensor specification, the reset pin is active low and the DT binding defines the pin as active low, which means that the values set by the driver are inverted and thus the value requested in probe ends up high. Fix it by changing probe to request the reset GPIO initialized to high, which makes the initial state of the physical signal low. In addition, DOVDD rising must occur before DVDD rising from spec., but regulator_bulk_enable() API enables all the regulators asynchronously. Use an explicit loops of regulator_enable() instead. For power off sequence, it is required that DVDD falls first. Given the bulk API does not give any guarantee about the order of regulators, change the driver to use regulator_disable() instead. The sensor also requires a delay between reset high and first I2C transaction, which was assumed to be 8192 XVCLK cycles, but 1ms is recommended by the vendor. Fix this as well. Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: i2c: imx219: Add support for cropped 640x480 resolutionLad Prabhakar
This patch adds mode table entry for capturing cropped 640x480 resolution Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: i2c: imx219: Add support for RAW8 bit bayer formatLad Prabhakar
IMX219 sensor is capable for RAW8/RAW10 modes. This commit adds support for RAW8 bayer format. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: i2c: imx219: Fix power sequenceLad Prabhakar
When supporting Rpi Camera v2 Module on the RZ/G2E, found the driver had some issues with rcar mipi-csi driver. The sensor never entered into LP-11 state. The powerup sequence in the datasheet[1] shows the sensor entering into LP-11 in streaming mode, so to fix this issue transitions are performed from "streaming -> standby" in the probe() after power up. With this commit the sensor is able to enter LP-11 mode during power up, as expected by some CSI-2 controllers. [1] https://publiclab.org/system/images/photos/000/023/294/original/ RASPBERRY_PI_CAMERA_V2_DATASHEET_IMX219PQH5_7.0.0_Datasheet_XXX.PDF Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: staging: imgu: make imgu work on low frequency for low inputBingbu Cao
Currently, imgu is working on 450MHz for all cases, however in some cases (input frame less than 2048x1152), the imgu did not need work in high frequency. This patch make imgu work on 200MHz if the imgu input frame is less than 2048x1152 to save power. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12serial: core: Refactor uart_unlock_and_check_sysrq()Andy Shevchenko
Refactor uart_unlock_and_check_sysrq() to: - explicitly show that we release a port lock which makes static analyzers happy: CHECK drivers/tty/serial/serial_core.c .../serial_core.c:3290:17: warning: context imbalance in 'uart_unlock_and_check_sysrq' - unexpected unlock - use flags instead of irqflags to avoid confusion with IRQ flags - provide one return point - be more compact Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20200310174337.74109-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12serial: core: Use uart_console() helper in SysRq codeAndy Shevchenko
Use uart_console() helper in SysRq code instead of open coded variant. This eliminates the conditional entirely for SERIAL_CORE_CONSOLE=n case. While here, refactor the conditional to be more compact. Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200310174337.74109-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12serial: core: Print escaped SysRq Magic sequence if enabledAndy Shevchenko
It is useful to see on the serial console the magic sequence itself to enable SysRq without rummaging source code. Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200310174337.74109-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12serial: core: Use string length for SysRq magic sequenceAndy Shevchenko
Compiler is not happy about using ARRAY_SIZE() in comparison to smaller type: CC drivers/tty/serial/serial_core.o .../serial_core.c: In function ‘uart_try_toggle_sysrq’: .../serial_core.c:3222:24: warning: comparison is always false due to limited range of data type [-Wtype-limits] 3222 | if (++port->sysrq_seq < (ARRAY_SIZE(sysrq_toggle_seq) - 1)) { | ^ Looking at the code it appears that there is an additional weirdness, i.e. use ARRAY_SIZE() against simple string literal. Yes, the idea probably was to allow '\0' in the sequence, but it's impractical: kernel configuration won't accept it to begin with followed by a comment about '\0' before comparison in question. Drop all these by switching to strlen() and convert code accordingly. Note, GCC seems clever enough to calculate string length at compile time. Fixes: 68af43173d3f ("serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE") Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200310174337.74109-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12media: Fix build failure due to missing select REGMAP_I2CIan Kumlien
While upgrading from 5.5.2 -> 5.5.6 I was surprised by: ld: drivers/media/i2c/tvp5150.o: in function `tvp5150_probe': tvp5150.c:(.text+0x11ac): undefined reference to `__devm_regmap_init_i2c' make: *** [Makefile:1078: vmlinux] Error 1 The fix was quick enough, make VIDEO_TVP5150 select REGMAP_I2C And a quick grep showed that it was needed by more targets. Signed-off-by: Ian Kumlien <ian.kumlien@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12slimbus: ngd: add v2.1.0 compatibleSrinivas Kandagatla
This patch adds compatible for SlimBus Controller on SDM845. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200312152510.12224-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-12media: tvp5150: make debug output more readableMarco Felsch
The debug output for tvp5150_selmux() isn't really intuitive. Register values are printed decimal formatted and the input/output driver states are printed as enum. Even more the "normal" output enum mapps to zero so a active output will printing output=0 and a inactive output=1. Change this by brinting the register values hex formatted and the states as more readable string. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add support to limit sdtv standardsMarco Felsch
The tvp5150 accepts NTSC(M,J,4.43), PAL (B,D,G,H,I,M,N) and SECAM video data and is able to auto-detect the input signal. The auto-detection does not work if the connector does not receive an input signal and the tvp5150 might not be configured correctly. This misconfiguration leads into wrong decoded video streams if the tvp5150 gets powered on before the video signal is present. Limit the supported sdtv standards according to the actual selected connector to avoid a misconfiguration. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add subdev open/close callbacksMarco Felsch
Bring the device into a working state upon a open/close call. Currently this involves only the interrupt enable/disable process but can be extended in the future. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add v4l2-event supportMarco Felsch
Currently the driver notifies internal subdevs if the signal is locked or not. This information is also useful for userpace applications e.g. to switch to another input device upon a signal lost event. This commit adds the support for the userspace to subscribe to the V4L2_EVENT_SOURCE_CHANGE and V4L2_EVENT_CTRL events. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: move irq en-/disable into runtime-pm opsMarco Felsch
As documented in [1] the runtime-pm ops are used to set the device into a fully 'workable' state. Therefore it can be used to enable or disable the irqs. [1] https://www.kernel.org/doc/html/latest/power/runtime_pm.html Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: initialize subdev before parsing device treeMichael Tretter
There are several debug prints in the tvp5150_parse_dt() function, which do not print the prefix, because the v4l2_subdev is not initialized, yet. Initialize the v4l2_subdev before parsing the device tree to fix the debug messages. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add FORMAT_TRY support for get/set selection handlersMarco Felsch
Since commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") the 'which' field for set/get_selection must be FORMAT_ACTIVE. There is no way to try different selections. The patch adds a helper function to select the correct selection memory space (sub-device file handle or driver state) which will be set/returned. The selection rectangle is updated if the format is FORMAT_ACTIVE and the rectangle position and/or size differs from the current set rectangle. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: fix set_selection rectangle handlingMarco Felsch
Currently a local copy of sel->r is made and adapted to the hardware constraints. After the adaption the value is applied to the hardware but the driver forgot to reflect the adapted value to the user space. Drop the local copy and work directly on the requested rectangle instead to fix this. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: tvp5150: add input source selection of_graph supportMarco Felsch
This patch adds the of_graph support to describe the tvp input connections. Physical the TVP5150 has three ports: AIP1A, AIP1B and YOUT. As result of discussion [1],[2] the device-tree maps these ports 1:1. Look at the Documentation for more information. Since the TVP5150 is a converter/bridge the device-tree must contain at least 1-input and 1-output port. The mc-connectors and mc-links are only created if the device-tree contains the corresponding connector nodes. If more than one connector is available the media_entity_operations.link_setup() callback ensures that only one connector is active. [1] https://www.spinics.net/lists/linux-media/msg138545.html [2] https://www.spinics.net/lists/linux-media/msg138546.html Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: partial revert of "[media] tvp5150: add HW input connectors support"Javier Martinez Canillas
Commit f7b4b54e6364 ("[media] tvp5150: add HW input connectors support") added input signals support for the tvp5150, but the approach was found to be incorrect so the corresponding DT binding commit 82c2ffeb217a ("[media] tvp5150: document input connectors DT bindings") was reverted. This left the driver with an undocumented (and wrong) DT parsing logic, so lets get rid of this code as well until the input connectors support is implemented properly. It's a partial revert due other patches added on top of mentioned commit not allowing the commit to be reverted cleanly anymore. But all the code related to the DT parsing logic and input entities creation are removed. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [m.felsch@pengutronix.de: rm TVP5150_INPUT_NUM define] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: v4l2-fwnode: add initial connector parsing supportMarco Felsch
The patch adds the initial connector parsing code, so we can move from a driver specific parsing code to a generic one. Currently only the generic fields and the analog-connector specific fields are parsed. Parsing the other connector specific fields can be added by a simple callbacks. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> [hverkuil-cisco@xs4all.nl: replace ; with break; in a empty case] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: v4l2-fwnode: add endpoint id field to v4l2_fwnode_linkMarco Felsch
A link is between two endpoints not between two ports to be more precise. Add the local_id/remote_id field which stores the endpoint reg/port property to the link. Now the link holds all necessary information about a link. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: v4l2-fwnode: simplify v4l2_fwnode_parse_linkMarco Felsch
This helper was introduced before those helpers where awailable. Convert it to cleanup the code and improbe readability. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: v4l2-fwnode: fix v4l2_fwnode_parse_link handlingMarco Felsch
Currently the driver differentiate the port number property handling for ACPI and DT. This is wrong as because ACPI should use the "reg" val too [1]. [1] https://patchwork.kernel.org/patch/11421985/ Fixes: ca50c197bd96 ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: am437x-vpfe: exclude illegal values for enum when validing params ↵Changming Liu
from user space When calling ccdc_data_size_max_bit() to validate data_sz in vpfe_ccdc_validate_param(), it's treated as an enumeration ranging from 0 to 7 while essentially it's an 32 bit unsigned integer directly from user space. This can make the return value of ccdc_data_size_max_bit() underflow and bypass the following check. To fix this, an additional check is added to the following if clause to keep this enumaration variable in range. And if its value is not legal, return -EINVAL properly. Signed-off-by: Changming Liu <charley.ashbringer@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: ti-vpe: cal: fix a kernel oops when unloading moduleBenoit Parrot
After the switch to use v4l2_async_notifier_add_subdev() and v4l2_async_notifier_cleanup(), unloading the ti_cal module would cause a kernel oops. This was root cause to the fact that v4l2_async_notifier_cleanup() tries to kfree the asd pointer passed into v4l2_async_notifier_add_subdev(). In our case the asd reference was from a statically allocated struct. So in effect v4l2_async_notifier_cleanup() was trying to free a pointer that was not kalloc. So here we switch to using a kzalloc struct instead of a static one. To achieve this we re-order some of the calls to prevent asd allocation from leaking. Fixes: d079f94c9046 ("media: platform: Switch to v4l2_async_notifier_add_subdev") Cc: stable@vger.kernel.org Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: mtk-vpu: avoid unaligned access to DTCM buffer.Hsin-Yi Wang
Previously, vpu->recv_buf and send_buf are forced cast from void __iomem *tcm. vpu->recv_buf->share_buf is passed to vpu_ipi_desc.handler(). It's not able to do unaligned access. Otherwise kernel would crash due to unable to handle kernel paging request. struct vpu_run { u32 signaled; char fw_ver[VPU_FW_VER_LEN]; unsigned int dec_capability; unsigned int enc_capability; wait_queue_head_t wq; }; fw_ver starts at 4 byte boundary. If system enables CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, strscpy() will do read_word_at_a_time(), which tries to read 8-byte: *(unsigned long *)addr vpu_init_ipi_handler() calls strscpy(), which would lead to crash. vpu_init_ipi_handler() and several other handlers (eg. vpu_dec_ipi_handler) only do read access to this data, so they can be const, and we can use memcpy_fromio() to copy the buf to another non iomem buffer then pass to handler. Fixes: 85709cbf1524 ("media: replace strncpy() by strscpy()") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12null_blk: fix spurious IO errors after failed past-wp accessAlexey Dobriyan
Steps to reproduce: BLKRESETZONE zone 0 // force EIO pwrite(fd, buf, 4096, 4096); [issue more IO including zone ioctls] It will start failing randomly including IO to unrelated zones because of ->error "reuse". Trigger can be partition detection as well if test is not run immediately which is even more entertaining. The fix is of course to clear ->error where necessary. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12spi: spi-nxp-fspi: Fix a NULL vs IS_ERR() check in probeDan Carpenter
The platform_get_resource_byname() function returns NULL on error, it doesn't return error pointers. Fixes: d166a73503ef ("spi: fspi: dynamically alloc AHB memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200312113154.GC20562@mwanda Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-12nbd: requeue command if the soecket is changedHou Pu
In commit 2da22da5734 (nbd: fix zero cmd timeout handling v2), it is allowed to reset timer when it fires if tag_set.timeout is set to zero. If the server is shutdown and a new socket is reconfigured, the request should be requeued to be processed by new server instead of waiting for response from the old one. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12nbd: enable replace socket if only one connection is configuredHou Pu
Nbd server with multiple connections could be upgraded since 560bc4b (nbd: handle dead connections). But if only one conncection is configured, after we take down nbd server, all inflight IO would finally timeout and return error. We could requeue them like what we do with multiple connections and wait for new socket in submit path. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12block/drbd: delete invalid function drbd_md_mark_dirty_Jackie Liu
We deleted last_md_mark_dirty long ago, this function no longer needs to exist, delete it, otherwise a compilation error will occur when DEBUG is opened. Fixes: ac0acb9e39ac ("drbd: use drbd_device_post_work() in more place") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12AHCI: Add support for Loongson 7A1000 SATA controllerTiezhu Yang
Loongson 7A1000 SATA controller uses BAR0 as the base address register. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12ssb: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-12prism54: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-12ipw2x00: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-12b43legacy: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: b43-dev@lists.infradead.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-24 23:15:04 +0000