summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-02-27net/mlx5e: Use NL_SET_ERR_MSG_MOD() extack for errorsRoi Dayan
This to be consistent and adds the module name to the error message. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5e: Use netdev_warn() instead of pr_err() for errorsRoi Dayan
This is for added netdev prefix that helps identify the source of the message. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5e: Use netdev_warn() for errors for added prefixRoi Dayan
This helps identify the source of the message. If netdev still doesn't exists use mlx5_core_warn(). Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5: DR, Improve log messagesErez Shitrit
Few print messages are in debug level where they should be in error, and few messages are missing. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5: DR, Change matcher priority parameter typeHamdan Igbaria
Change matcher priority parameter type from u16 to u32, this change is needed since sometimes upper levels create a matcher with priority bigger than 2^16. Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5e: Add devlink fdb_large_groups parameterJianbo Liu
Add a devlink parameter to control the number of large groups in a autogrouped flow table. The default value is 15, and the range is between 1 and 1024. The size of each large group can be calculated according to the following formula: size = 4M / (fdb_large_groups + 1). Examples: - Set the number of large groups to 20. $ devlink dev param set pci/0000:82:00.0 name fdb_large_groups \ cmode driverinit value 20 Then run devlink reload command to apply the new value. $ devlink dev reload pci/0000:82:00.0 - Read the number of large groups in flow table. $ devlink dev param show pci/0000:82:00.0 name fdb_large_groups pci/0000:82:00.0: name fdb_large_groups type driver-specific values: cmode driverinit value 20 Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5: Change the name of steering mode param idJianbo Liu
The prefix should be "MLX5_DEVLINK_PARAM_ID_" for all in mlx5_devlink_param_id enum. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5e: Add support for devlink-port in non-representors modeVladyslav Tarasiuk
Added devlink_port field to mlx5e_priv structure and a callback to netdev ops to enable devlink to get info about the port. The port registration happens at driver initialization. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5e: Rename representor get devlink port functionVladyslav Tarasiuk
Rename representor's mlx5e_get_devlink_port() to mlx5e_rep_get_devlink_port(). The downstream patch will add a non-representor mlx5e function called mlx5e_get_devlink_phy_port(). Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5: E-Switch, Allow goto earlier chain if FW supports itRoi Dayan
Mellanox FW can support this if ignore_flow_level capability exists. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5e: Eswitch, Use per vport tables for mirroringEli Cohen
When using port mirroring, we forward the traffic to another table and use that table to forward to the mirrored vport. Since the hardware loses the values of reg c, and in particular reg c0, we fail the match on the input vport which previously existed in reg c0. To overcome this situation, we use a set of per vport tables, positioned at the lowest priority, and forward traffic to those tables. Since these tables are per vport, we can avoid matching on reg c0. Fixes: c01cfd0f1115 ("net/mlx5: E-Switch, Add match on vport metadata for rule in fast path") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5: Eswitch, avoid redundant maskEli Cohen
misc_params.source_port is a 16 bit field already so no need for redundant masking against 0xffff. Also change local variables type to u16. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-27net/mlx5e: Don't allow forwarding between uplinkTonghao Zhang
We can install forwarding packets rule between uplink in switchdev mode, as show below. But the hardware does not do that as expected (mlnx_perf -i $PF1, we can't get the counter of the PF1). By the way, if we add the uplink PF0, PF1 to Open vSwitch and enable hw-offload, the rules can be offloaded but not work fine too. This patch add a check and if so return -EOPNOTSUPP. $ tc filter add dev $PF0 protocol all parent ffff: prio 1 handle 1 \ flower skip_sw action mirred egress redirect dev $PF1 $ tc -d -s filter show dev $PF0 ingress skip_sw in_hw in_hw_count 1 action order 1: mirred (Egress Redirect to device enp130s0f1) stolen ... Sent hardware 408954 bytes 4173 pkt ... Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-28crypto: chelsio - un-register crypto algorithmsDevulapally Shiva Krishna
When a PCI device will be removed, cxgb4(LLD) will notify chcr(ULD). Incase if it's a last pci device, chcr should un-register all the crypto algorithms. Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-28crypto: xilinx - Add Xilinx AES driverKalyani Akula
This patch adds AES driver support for the Xilinx ZynqMP SoC. Signed-off-by: Mohan Marutirao Dhanawade <mohan.dhanawade@xilinx.com> Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-28firmware: xilinx: Add ZynqMP aes API for AES functionalityKalyani Akula
Add ZynqMP firmware AES API to perform encryption/decryption of given data. Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix leak in nl80211 AP start where we leak the ACL memory, from Johannes Berg. 2) Fix double mutex unlock in mac80211, from Andrei Otcheretianski. 3) Fix RCU stall in ipset, from Jozsef Kadlecsik. 4) Fix devlink locking in devlink_dpipe_table_register, from Madhuparna Bhowmik. 5) Fix race causing TX hang in ll_temac, from Esben Haabendal. 6) Stale eth hdr pointer in br_dev_xmit(), from Nikolay Aleksandrov. 7) Fix TX hash calculation bounds checking wrt. tc rules, from Amritha Nambiar. 8) Size netlink responses properly in schedule action code to take into consideration TCA_ACT_FLAGS. From Jiri Pirko. 9) Fix firmware paths for mscc PHY driver, from Antoine Tenart. 10) Don't register stmmac notifier multiple times, from Aaro Koskinen. 11) Various rmnet bug fixes, from Taehee Yoo. 12) Fix vsock deadlock in vsock transport release, from Stefano Garzarella. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() unix: It's CONFIG_PROC_FS not CONFIG_PROCFS net: rmnet: fix packet forwarding in rmnet bridge mode net: rmnet: fix bridge mode bugs net: rmnet: use upper/lower device infrastructure net: rmnet: do not allow to change mux id if mux id is duplicated net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device() net: rmnet: fix suspicious RCU usage net: rmnet: fix NULL pointer dereference in rmnet_changelink() net: rmnet: fix NULL pointer dereference in rmnet_newlink() net: phy: marvell: don't interpret PHY status unless resolved mlx5: register lag notifier for init network namespace only unix: define and set show_fdinfo only if procfs is enabled hinic: fix a bug of rss configuration hinic: fix a bug of setting hw_ioctxt hinic: fix a irq affinity bug net/smc: check for valid ib_client_data ...
2020-02-27ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()Rafael J. Wysocki
If the status value returned by acpi_install_address_space_handler() in ec_install_handlers() is AE_NOT_FOUND, it is treated in a special way, apparently because it might mean a _REG method evaluation failure (at least that is the case according to the comment in there), but acpi_install_address_space_handler() does not take _REG evaluation errors into account at all, so the AE_NOT_FOUND special handling is confusing at best. For this reason, change ec_install_handlers() to stop the EC and return -ENODEV on all acpi_install_address_space_handler() errors. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-27ACPI: EC: Avoid passing redundant argument to functionsRafael J. Wysocki
After commit 406857f773b0 ("ACPI: EC: add support for hardware-reduced systems") the handle_events argument passed to ec_install_handlers() and acpi_ec_setup() is redundant, because it is always 'false' when the device argument passed to them in NULL and it is always 'true' otherwise, so the device argument can be tested against NULL instead of testing the handle_events one. Accordingly, modify ec_install_handlers() and acpi_ec_setup() to take two arguments and reduce the number of checks in the former. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-27ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()Rafael J. Wysocki
It doesn't really make sense to pass ec->handle of the ECDT EC to acpi_handle_info(), because it is set to ACPI_ROOT_OBJECT in acpi_ec_ecdt_probe(), so rework acpi_ec_setup() to avoid using acpi_handle_info() for printing messages. First, notice that the "Used as first EC" message is not really useful, because it is immediately followed by a more meaningful one from either acpi_ec_ecdt_probe() or acpi_ec_dsdt_probe() (the latter also includes the EC object path), so drop it altogether. Second, use pr_info() for printing the EC configuration information. While at it, make the code in question avoid printing invalid GPE or IRQ numbers and make it print the GPE/IRQ information only when the driver is ready to handle events. Fixes: 72c77b7ea9ce ("ACPI / EC: Cleanup first_ec/boot_ec code") Fixes: 406857f773b0 ("ACPI: EC: add support for hardware-reduced systems") Cc: 5.5+ <stable@vger.kernel.org> # 5.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-27dm zoned: Fix reference counter initial value of chunk worksShin'ichiro Kawasaki
Dm-zoned initializes reference counters of new chunk works with zero value and refcount_inc() is called to increment the counter. However, the refcount_inc() function handles the addition to zero value as an error and triggers the warning as follows: refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 1506 at lib/refcount.c:25 refcount_warn_saturate+0x68/0xf0 ... CPU: 7 PID: 1506 Comm: systemd-udevd Not tainted 5.4.0+ #134 ... Call Trace: dmz_map+0x2d2/0x350 [dm_zoned] __map_bio+0x42/0x1a0 __split_and_process_non_flush+0x14a/0x1b0 __split_and_process_bio+0x83/0x240 ? kmem_cache_alloc+0x165/0x220 dm_process_bio+0x90/0x230 ? generic_make_request_checks+0x2e7/0x680 dm_make_request+0x3e/0xb0 generic_make_request+0xcf/0x320 ? memcg_drain_all_list_lrus+0x1c0/0x1c0 submit_bio+0x3c/0x160 ? guard_bio_eod+0x2c/0x130 mpage_readpages+0x182/0x1d0 ? bdev_evict_inode+0xf0/0xf0 read_pages+0x6b/0x1b0 __do_page_cache_readahead+0x1ba/0x1d0 force_page_cache_readahead+0x93/0x100 generic_file_read_iter+0x83a/0xe40 ? __seccomp_filter+0x7b/0x670 new_sync_read+0x12a/0x1c0 vfs_read+0x9d/0x150 ksys_read+0x5f/0xe0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... After this warning, following refcount API calls for the counter all fail to change the counter value. Fix this by setting the initial reference counter value not zero but one for the new chunk works. Instead, do not call refcount_inc() via dmz_get_chunk_work() for the new chunks works. The failure was observed with linux version 5.4 with CONFIG_REFCOUNT_FULL enabled. Refcount rework was merged to linux version 5.5 by the commit 168829ad09ca ("Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"). After this commit, CONFIG_REFCOUNT_FULL was removed and the failure was observed regardless of kernel configuration. Linux version 4.20 merged the commit 092b5648760a ("dm zoned: target: use refcount_t for dm zoned reference counters"). Before this commit, dm zoned used atomic_t APIs which does not check addition to zero, then this fix is not necessary. Fixes: 092b5648760a ("dm zoned: target: use refcount_t for dm zoned reference counters") Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-27dm writecache: verify watermark during resumeMikulas Patocka
Verify the watermark upon resume - so that if the target is reloaded with lower watermark, it will start the cleanup process immediately. Fixes: 48debafe4f2f ("dm: add writecache target") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-27dm: report suspended device during destroyMikulas Patocka
The function dm_suspended returns true if the target is suspended. However, when the target is being suspended during unload, it returns false. An example where this is a problem: the test "!dm_suspended(wc->ti)" in writecache_writeback is not sufficient, because dm_suspended returns zero while writecache_suspend is in progress. As is, without an enhanced dm_suspended, simply switching from flush_workqueue to drain_workqueue still emits warnings: workqueue writecache-writeback: drain_workqueue() isn't complete after 10 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 100 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 200 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 300 tries workqueue writecache-writeback: drain_workqueue() isn't complete after 400 tries writecache_suspend calls flush_workqueue(wc->writeback_wq) - this function flushes the current work. However, the workqueue may re-queue itself and flush_workqueue doesn't wait for re-queued works to finish. Because of this - the function writecache_writeback continues execution after the device was suspended and then concurrently with writecache_dtr, causing a crash in writecache_writeback. We must use drain_workqueue - that waits until the work and all re-queued works finish. As a prereq for switching to drain_workqueue, this commit fixes dm_suspended to return true after the presuspend hook and before the postsuspend hook - just like during a normal suspend. It allows simplifying the dm-integrity and dm-writecache targets so that they don't have to maintain suspended flags on their own. With this change use of drain_workqueue() can be used effectively. This change was tested with the lvm2 testsuite and cryptsetup testsuite and the are no regressions. Fixes: 48debafe4f2f ("dm: add writecache target") Cc: stable@vger.kernel.org # 4.18+ Reported-by: Corey Marthaler <cmarthal@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-02-27media: vsp1: tidyup VI6_HGT_LBn_H() macroKuninori Morimoto
The address of VSP2_VI6_HGT_LBx_H are VSP2_VI6_HGT_LB0_H : 0x3428 VSP2_VI6_HGT_LB1_H : 0x3430 VSP2_VI6_HGT_LB2_H : 0x3438 VSP2_VI6_HGT_LB3_H : 0x3440 Thus, VI6_HGT_LBn_H() macro should start from 0x3420 instead of 0x3430. This patch fixes it. Fixes: 26e0ca22c3b8 ("[media] v4l: Renesas R-Car VSP1 driver") Reported-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27media: smiapp: Move definitions under driver directorySakari Ailus
include/media/i2c/smiapp.h was meant to serve systems where the sensor is enumerated through platform data. That's no longer necessary, hopefully not even in out-of-tree use cases. Move the definitions to the appropriate headers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27media: smiapp: Refactor reading SMIA limitsSakari Ailus
Combine the two trivial functions reading limits into one. Also rename smiapp_get_all_limits() as smiapp_read_all_smia_limits(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27media: smiapp: Move SMIA limit reading upSakari Ailus
Move SMIA limit reading up, where other limit and capability handling takes place. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27media: smiapp: Turn limit lookup into a functionSakari Ailus
Instead of direct array access, turn accessing limit information into a function. Going forward, more elaborate CCS limits will replace most SMIA limits, and conversion will be less complicated this way. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27media: smiapp: Use unaligned get and put functionsSakari Ailus
Use get_unaligned_be* and put_unaligned_be* functions to convert register values to CPU endianness. Consequently, two instances of BUG() are removed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()Jason Gunthorpe
The algorithm pre-allocates a cm_id since allocation cannot be done while holding the cm.lock spinlock, however it doesn't free it on one error path, leading to a memory leak. Fixes: 067b171b8679 ("IB/cm: Share listening CM IDs") Link: https://lore.kernel.org/r/20200221152023.GA8680@ziepe.ca Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-27media: smiapp: Simplify condition for choosing 8-bit accessSakari Ailus
Use the only8 boolean to determine whether 8-bit access is required for reading. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27net: dsa: mv88e6xxx: Fix masking of egress portAndrew Lunn
Add missing ~ to the usage of the mask. Reported-by: Kevin Benson <Kevin.Benson@zii.aero> Reported-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 5c74c54ce6ff ("net: dsa: mv88e6xxx: Split monitor port configuration") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27media: omap3isp: Prevent enabling CCDC when stopping streamingSakari Ailus
Commit ... prevented restarting CCDC through its interrupt handler when it's about to be disabled. It missed to address the case when CCDC might be enabled due to queueing a buffer. Do that now. Fixes: dd12ed17ce9e ("omap3isp: Don't restart CCDC if we're about to stop") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27media: staging: media: ipu3: Change 'unsigned long int' to 'unsigned long'Jean-Baptiste Jouband
This patch fixes the checkpatch.pl warning: WARNING: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary Signed-off-by: Jean-Baptiste Jouband <jj.jouband@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27media: i2c: Add driver for Sony IMX219 sensorDave Stevenson
Adds a driver for the 8MPix Sony IMX219 CSI2 sensor. Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver currently only supports 2 lanes. 8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned) @ 30fps are currently supported. [Sakari Ailus: make imx219_check_hwcfg static] Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27media: ipu3.rst: add imgu pipe config tool linkBingbu Cao
A specific tool which can be used to generate imgu intermedia resolutions now is public on github, this patch adds this information into ipu3.rst. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27media: ov5675: add vflip/hflip control supportShawn Tu
- Add V4L2 controls: horizontal/vertical flip, keep SGRBG10 Bayer order output (via change v/hflip) - Fix Bayer order output in 1296x972 binning registers Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2020-02-27mlxsw: pci: Wait longer before accessing the device after resetAmit Cohen
During initialization the driver issues a reset to the device and waits for 100ms before checking if the firmware is ready. The waiting is necessary because before that the device is irresponsive and the first read can result in a completion timeout. While 100ms is sufficient for Spectrum-1 and Spectrum-2, it is insufficient for Spectrum-3. Fix this by increasing the timeout to 200ms. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27mlxsw: reg: Update module_type values in PMTM register and map them to widthJiri Pirko
There are couple new values that PMTM register can return in module_type field. Add them and map them to module width in mlxsw_core_module_max_width(). Fix the existing names on the way. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27WAN: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27NFC: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27sfc: fix timestamp reconstruction at 16-bit rollover pointsAlex Maftei (amaftei)
We can't just use the top bits of the last sync event as they could be off-by-one every 65,536 seconds, giving an error in reconstruction of 65,536 seconds. This patch uses the difference in the bottom 16 bits (mod 2^16) to calculate an offset that needs to be applied to the last sync event to get to the current time. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: mvpp2: use resolved link config in mac_link_up()Russell King
Convert the Marvell mvpp2 ethernet driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: mvneta: use resolved link config in mac_link_up()Russell King
Convert the Marvell mvneta ethernet driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: macb: use resolved link config in mac_link_up()Russell King
Convert the macb ethernet driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: dpaa2-mac: use resolved link config in mac_link_up()Russell King
Convert the DPAA2 ethernet driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(), which are more suited to the needs of the DPAA2 MC firmware than those available via mac_config(). Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: axienet: use resolved link config in mac_link_up()Russell King
Convert the Xilinx AXI ethernet driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: mv88e6xxx: use resolved link config in mac_link_up()Russell King
Use the resolved link configuration to set the MAC configuration when mac_link_up() for non-internal-PHY ports. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: dsa: propagate resolved link config via mac_link_up()Russell King
Propagate the resolved link configuration down via DSA's phylink_mac_link_up() operation to allow split PCS/MAC to work. Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: phylink: propagate resolved link config via mac_link_up()Russell King
Propagate the resolved link parameters via the mac_link_up() call for MACs that do not automatically track their PCS state. We propagate the link parameters via function arguments so that inappropriate members of struct phylink_link_state can't be accessed, and creating a new structure just for this adds needless complexity to the API. Tested-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-01 00:55:24 +0000