summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-05-24ath5k: consistently use rx_bufsize for RX DMABruno Randolf
We should use the same buffer size we set up for DMA also in the hardware descriptor. Previously we used common->rx_bufsize for setting up the DMA mapping, but used skb_tailroom(skb) for the size we tell to the hardware in the descriptor itself. The problem is that skb_tailroom(skb) can give us a larger value than the size we set up for DMA before. This allows the hardware to write into memory locations not set up for DMA. In practice this should rarely happen because all packets should be smaller than the maximum 802.11 packet size. On the tested platform rx_bufsize is 2528, and we allocated an skb of 2559 bytes length (including padding for cache alignment) but sbk_tailroom() was 2592. Just consistently use rx_bufsize for all RX DMA memory sizes. Also use the return value of the descriptor setup function. Cc: stable@kernel.org Signed-off-by: Bruno Randolf <br1@einfach.org> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-24HID: Add the GYR4101US USB ID to hid-gyrationCory Maccarrone
This change adds in the USB product ID for the Gyration GYR4101US USB media center remote control. This remote is similar enough to the other two devices that this driver can be used without any other changes to get full support for the remote. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-24[SCSI] ipr: improve interrupt service routine performanceWayne Boyer
During performance testing on P7 machines it was observed that the interrupt service routine was doing unnecessary MMIO operations. This patch rearranges the logic of the routine and moves some of the code out of the main routine. The result is that there are now fewer MMIO operations in the performance path of the code. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] ipr: set the data list length in the request control blockWayne Boyer
In bring up testing for the new 64 bit adapters, the first read command failed after loading the driver. The cause was that the command requires more than one scatter gather element and the corresponding code to set the data list length in the request control block was missing. This patch adds the correct assignment. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] ipr: fix a register read to use the correct address for 64 bit adaptersWayne Boyer
Fix ipr_reset_enable_ioa() to read the correct IOA to host interrupt register address for 64 bit adapters. We need to read the lower 32 bits, not the upper 32 bits. Also change the write of the 64 bit mask value to a single writeq instead of two writel calls. Finally, use the correct u8 type for the type field in the ipr_resource_entry structure. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] ipr: include the resource path in the IOA status area structureWayne Boyer
The IOA status area now includes the new resource path field for 64 bit adapters. This patch changes the driver to fix the ioasa structure and to use the correct structure definition based on the type of adatper. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] ipr: implement fixes for 64 bit adapter supportWayne Boyer
Implement some small fixes for 64 bit support that were preventing the adapter from becoming operational. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24[SCSI] be2iscsi: correct return value in mgmt_invalidate_icds()Dan Carpenter
This function should return 0 on error. Returning -1 would cause a crash. Also there is an extra space before the newline character and a missing space between the "for" and the "mgmt_invalidate_icds". I put the string on one line. The current version of checkpatch.pl complains that the line is too long, but it makes grepping easier. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: cmd640: fix kernel oops in test_irq() method pdc202xx_old: ignore "FIFO empty" bit in test_irq() method pdc202xx_old: wire test_irq() method for PDC2026x IDE: pass IRQ flags to the IDE core ide: fix comment typo in ide.h
2010-05-24Merge branch 'bkl/ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: uml: Pushdown the bkl from harddog_kern ioctl sunrpc: Pushdown the bkl from sunrpc cache ioctl sunrpc: Pushdown the bkl from ioctl autofs4: Pushdown the bkl from ioctl uml: Convert to unlocked_ioctls to remove implicit BKL ncpfs: BKL ioctl pushdown coda: Clean-up whitespace problems in pioctl.c coda: BKL ioctl pushdown drivers: Push down BKL into various drivers isdn: Push down BKL into ioctl functions scsi: Push down BKL into ioctl functions dvb: Push down BKL into ioctl functions smbfs: Push down BKL into ioctl function coda/psdev: Remove BKL from ioctl function um/mmapper: Remove BKL usage sn_hwperf: Kill BKL usage hfsplus: Push down BKL into ioctl function
2010-05-24Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: ds2760_battery: Document ABI change ds2760_battery: Make charge_now and charge_full writeable power_supply: Add support for writeable properties power_supply: Use attribute groups power_supply: Add test_power driver tosa_battery: Fix build error due to direct driver_data usage wm97xx_battery: Quieten sparse warning (bat_set_pdata not declared) ds2782_battery: Get rid of magic numbers in driver_data ds2782_battery: Add support for ds2786 battery gas gauge pda_power: Add function callbacks for suspend and resume wm831x_power: Use genirq Driver for Zipit Z2 battery chip ds2782_battery: Fix clientdata on removal
2010-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits) sh: fix up sh7785lcr_32bit_defconfig. arch/sh/lib/strlen.S: Checkpatch cleanup sh: fix up sh7786 dmaengine build. sh: guard cookie consistency across termination in the DMA driver sh: prevent the DMA driver from unloading, while in use sh: fix Oops in the serial SCI driver sh: allow platforms to specify SD-card supported voltages mmc: let MFD's provide supported Vdd card voltages to tmio_mmc sh: disable SD-card write-protection detection on kfr2r09 mfd: pass platform flags down to the tmio_mmc driver tmio: add a platform flag to disable card write-protection detection sh: Add SDHI DMA support to migor sh: Add SDHI DMA support to kfr2r09 sh: Add SDHI DMA support to ms7724se sh: Add SDHI DMA support to ecovec mmc: add DMA support to tmio_mmc driver, when used on SuperH sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell sh: add DMA slave definitions to sh7724 sh: add DMA slaves for two SDHI controllers to sh7722 ...
2010-05-24Revert "ath9k: Group Key fix for VAPs"Linus Torvalds
This reverts commit 03ceedea972a82d343fa5c2528b3952fa9e615d5, since it breaks resume from suspend-to-ram on Rafael's Acer Ferrari One. NetworkManager thinks everything is ok, but it can't connect to the AP to get an IP address after the resume. In fact, it even breaks resume for non-ath9k chipsets: reverting it also fixes Rafael's Toshiba Protege R500 with the iwlagn driver. As Johannes says: "Indeed, this patch needs to be reverted. That mac80211 change is wrong and completely unnecessary." Reported-and-requested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Johannes Berg <johannes@sipsolutions.net> Cc: Daniel Yingqiang Ma <yma.cool@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: of: change of_match_device to work with struct device of: Remove duplicate fields from of_platform_driver drivercore: Add of_match_table to the common device drivers arch/microblaze: Move dma_mask from of_device into pdev_archdata arch/powerpc: Move dma_mask from of_device into pdev_archdata of: eliminate of_device->node and dev_archdata->{of,prom}_node of: Always use 'struct device.of_node' to get device node pointer. i2c/of: Allow device node to be passed via i2c_board_info driver-core: Add device node pointer to struct device of: protect contents of of_platform.h and of_device.h of/flattree: Make unflatten_device_tree() safe to call from any arch of/flattree: make of_fdt.h safe to unconditionally include.
2010-05-24fusion: fix kernel-doc notationBen Hutchings
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24scsi_scan.c: fix/convert functions to use kernel-docRandy Dunlap
scsi_scan.c: fix incorrectly formatted kernel-doc notation & convert documentation of 2 functions into kernel-doc. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24HID: fix hid-roccat-kone for bin_attr API changeStephen Rothwell
After merging the driver-core tree, today's linux-next build (x86_64 allmodconfig) produced these warnings: drivers/hid/hid-roccat-kone.c:694: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:696: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:701: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:703: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:708: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:710: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:715: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:717: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:722: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:724: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:729: warning: initialization from incompatible pointer type drivers/hid/hid-roccat-kone.c:731: warning: initialization from incompatible pointer type Introduced by commit 867040163f10f2b52b45bc573f330d6eb28f5914 ("sysfs: add struct file* to bin_attr callbacks") from the driver-core tree interacting with commit 14bf62cde79423a02a590e02664ed29a36facec1 ("HID: add driver for Roccat Kone gaming mouse") from the hid tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-24fec: add support for PHY interface platform dataBaruch Siach
The i.MX25 PDK uses RMII to communicate with its PHY. This patch adds the ability to configure RMII, based on platform data. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-24tun: Update classid on packet injectionHerbert Xu
This patch makes tun update its socket classid every time we inject a packet into the network stack. This is so that any updates made by the admin to the process writing packets to tun is effected. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23net/irda: bfin_sir: IRDA is not affected by anomaly 05000230Graf Yang
Anomaly 05000230 (over sampling of the UART STOP bit) applies only when the peripheral is operating in UART mode. So drop the anomaly handling in the IRDA code. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23isdn/gigaset: remove dummy CAPI method implementationsTilman Schmidt
Dummy implementations for the optional CAPI controller operations load_firmware and reset_ctr can cause userspace callers to hang indefinitely. It's better not to implement them at all. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23isdn/capi: make reset_ctr op truly optionalTilman Schmidt
The CAPI controller operation reset_ctr is marked as optional, and not all drivers do implement it. Add a check to the kernel CAPI whether it exists before trying to call it. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23pppoe: uninitialized variable in pppoe_flush_dev()Dan Carpenter
This assignment got deleted along with the checks by mistake. This comes from: 8753d29fd "pppoe: remove unnecessary checks in pppoe_flush_dev" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23bfin_mac: fix memleak in mii_bus{probe|remove}Denis Kirjanov
Fix memory leak with miibus->irq Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23ethoc: fix null dereference in ethoc_probeThomas Chou
Dan reported the patch 0baa080c75c: "ethoc: use system memory as buffer" introduced a potential null dereference. 1060 free: 1061 if (priv->dma_alloc) ^^^^^^^^^^^^^^^ priv can be null here. He also suggested that the error handling is not complete. This patch fixes the null priv issue and improves resources releasing in ethoc_probe() and ethoc_remove(). Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23enic: Use random mac addr when associating port-profileScott Feldman
Use random mac addr for interface when associating port-profile to dynamic enic device, in the case no mac addr was previous assigned. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23enic: bug fix: sprintf UUID to string as u8[] rather than u16[] arrayScott Feldman
Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23IB/ipath: Remove support for QLogic PCIe QLE devicesRalph Campbell
The ib_qib driver is taking over support for QLogic PCIe QLE devices, so remove support for them from ib_ipath. The ib_ipath driver now supports only the obsolete QLogic Hyper-Transport IB host channel adapter (model QHT7140). Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-23IB/qib: Add new qib driver for QLogic PCIe InfiniBand adaptersRalph Campbell
Add a low-level IB driver for QLogic PCIe adapters. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-23IB/mad: Make needlessly global mad_sendq_size/mad_recvq_size staticRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-23DMA: PL330: Add dma api driverJassi Brar
Add DMA Engine API driver for the PL330 DMAC. This driver is supposed to be reusable by various platforms that have one or more PL330 DMACs. Atm, DMA_SLAVE and DMA_MEMCPY capabilities have been implemented. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> [dan.j.williams@intel.com: missing slab.h and ->device_control() fixups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-24drm: Fixes linux-next & linux-2.6 checkstack warnings:Prarit Bhargava
drivers/gpu/drm/nouveau/nv40_graph.c: In function `nv40_graph_init': drivers/gpu/drm/nouveau/nv40_graph.c:400: warning: the frame size of 1184 bytes is larger than 1024 bytes drivers/gpu/drm/radeon/radeon_atombios.c: In function `radeon_get_atom_connector_info_from_supported_devices_table': drivers/gpu/drm/radeon/radeon_atombios.c:857: warning: the frame size of 1872 bytes is larger than 1024 bytes Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-24nouveau: fix acpi_lid_open undefinedRandy Dunlap
When CONFIG_ACPI_BUTTON=m (and probably when ACPI_BUTTON is not enabled) and NOUVEAU is built-in (not as a loadable module): nouveau_connector.c:(.text+0xe17ce): undefined reference to `acpi_lid_open' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-24drm/radeon/kms: release AGP bridge at suspendJerome Glisse
I think it's good to release the AGP bridge at suspend and reacquire it at resume. Also fix : https://bugzilla.kernel.org/show_bug.cgi?id=15969 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-22spi/spi_mpc8xxx: fix potential memory corruption.Joakim Tjernlund
tx_dma/rx_dma are already set to a dummy buffer when no tx/rx buffer and t->tx_dma/t->rx_dma does not contain a dma address, but NULL. This may lead to corruption of kernel memory. Fix this by leaving tx_dma/rx_dma alone. Do not INIT_TX_RX while controller is enabled, this is bad according to the MPC8321 manual. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22sh: guard cookie consistency across termination in the DMA driverGuennadi Liakhovetski
If all descriptors on a channel are terminated or the channel is released, update the completed cookie counter to match the last cookie. This prevents inconsistency warning on resumed DMA operation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: prevent the DMA driver from unloading, while in useGuennadi Liakhovetski
This prevents the driver from unloading, while it is in use. Unloading of the driver, while its DMA channels are held, leads to a kernel Oops. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: fix Oops in the serial SCI driverGuennadi Liakhovetski
Fix an Oops, triggering, if the DMA buffer allocation for the Rx channel in sh-sci.c fails. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: allow platforms to specify SD-card supported voltagesGuennadi Liakhovetski
Boards can have different supplied voltages on different SD card slots. This information has to be passed down to the SD/MMC driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22mmc: let MFD's provide supported Vdd card voltages to tmio_mmcGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22mfd: pass platform flags down to the tmio_mmc driverGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22tmio: add a platform flag to disable card write-protection detectionGuennadi Liakhovetski
Write-protection status is not always available, e.g., micro-SD cards do not have a write-protection switch at all. This patch adds a flag to let platforms force tmio_mmc to consider the card writable. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22Input: twl4030-vibra - correct the power down sequencePeter Ujfalusi
It is better to turn off the first APLL, than the codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-22Input: enable onkey driver of max8925Haojian Zhuang
When ONKEY is held for 3 seconds, KEY_POWER event is reported. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-22mmc: add DMA support to tmio_mmc driver, when used on SuperHGuennadi Liakhovetski
SDHI controllers on SuperH, served by the tmio_mmc driver, can use slave DMA for data transfer. This patch adds support for the dmaengine API to the tmio_mmc driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.cGuennadi Liakhovetski
Pass DMA slave IDs from platform down to the tmio_mmc driver, to be used for dmaengine configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: change of_match_device to work with struct deviceGrant Likely
The of_node pointer is now stored directly in struct device, so of_match_device() should work with any device, not just struct of_device. This patch changes the interface to of_match_device() to accept a struct device instead of struct of_device. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-22drivercore: Add of_match_table to the common device driversGrant Likely
OF-style matching can be available to any device, on any type of bus. This patch allows any driver to provide an OF match table when CONFIG_OF is enabled so that drivers can be bound against devices described in the device tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2025-10-03 00:22:28 +0000