summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-10-24Merge tag 'iio-for-5.16b' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 2nd set of IIO new driver, cleanups and features for the 5.16 cycle New device support * adrf6780 microwave upconverter. - New driver for this interesting device including bindings. Features * lite-on ltr501 - Add dt-bindings including vendor ID and of_device_id table. - Add regulator support. * sensiron,scd4x - Add reporting of channel scale. Cleanups including fixes for things in this cycle * Tree wide: Another set of dev_err_probe() introductions to reduce noise in logs when deferred probing is needed and provide more debug info. Devices included this time: - amlogic,meson_saradc - capella,cm3605 - fsl,imx7d - maxim,max1118 - maxim,max1241 - nxp,lpc18xx - qcom,pm8xxxx-xoadc - rockchip,saradc - sharp,gp2ap002 - sterricson,ab8500 - ti,ads7950 * core - iio:buffer - Fix a path where a ret value is not intialized. * channel-mux - Add support to mux core subsystem for a settling delay and use it in the iio-channel-mux driver. - Fix a few dt binding warnings. * nxp,lpc18xx - Convert to devm_ functions for all of probe and drop remove() * st,lsm6dsx - Suppress a warning due to lack of handling of an enum *_MAX entry that is just there to get the size. * st,stm32-adc - Add generic channel binding, deprecating the old approach. - Add nvmem support to get calibration data for the vrefint channel and use it to perform such calibration. - Add a binding for sample-time to the generic channel description as it can be per channel. * ti,adc128s052 - Use devm_ managed functions and drop remove() * vti,sca3000 - Use sign_extend32() rather than opencoding. * xilinx,xadc - Drop irq field from state structure as now just used in probe. * tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (36 commits) dt-bindings: iio: frequency: add adrf6780 doc iio: frequency: adrf6780: add support for ADRF6780 iio: chemical: scd4x: Add a scale for the co2 concentration reading dt-bindings: iio: io-channel-mux: allow duplicate channel, labels dt-bindings: iio: io-channel-mux: add optional #io-channel-cells iio: adc: adc128s052: Simplify adc128_probe() iio: multiplexer: iio-mux: Support settle-time-us property dt-bindings: iio: io-channel-mux: Add property for settle time mux: add support for delay after muxing iio: adc: stm32-adc: use generic binding for sample-time iio: adc: stm32-adc: add vrefint calibration support iio: adc: stm32-adc: add support of internal channels iio: adc: stm32-adc: add support of generic channels binding iio: adc: stm32-adc: split channel init into several routines dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel dt-bindings: iio: stm32-adc: add generic channel binding iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension. iio: xilinx-xadc: Remove `irq` field from state struct iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr() iio: light: gp2ap002: Make use of the helper function dev_err_probe() ...
2021-10-24Merge tag 'iio-fixes-for-5.16a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of IIO fixes for the 5.16 cycle As these are very late in the 5.15 cycle and non are particularly urgent, they can wait for the merge window. Key element in this set is Yang Yingliang has identified a number of issues in error paths introduced recently when we added multiple buffer support. Other fixes: * adi,ad5662 - Fix handling of i2c_master_send() return value. * adi,ad5766 - Fix a wrong dt-property name that indicated wrong units and did not mach the bindings. - Associated 'fix' of the bindings example to have a possible scale. * st,pressure-spi - Add some missing entries to the spi_device_id table to ensure auto-loading works. * ti,tsc2046 - Fix a backwards comparison leading to a false dev_warn * tag 'iio-fixes-for-5.16a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: buffer: Fix memory leak in iio_buffers_alloc_sysfs_and_mask() iio: adc: tsc2046: fix scan interval warning iio: core: fix double free in iio_device_unregister_sysfs() iio: core: check return value when calling dev_set_name() iio: buffer: Fix memory leak in iio_buffer_register_legacy_sysfs_groups() iio: buffer: Fix double-free in iio_buffers_alloc_sysfs_and_mask() iio: buffer: Fix memory leak in __iio_buffer_alloc_sysfs_and_mask() iio: buffer: check return value of kstrdup_const() iio: dac: ad5446: Fix ad5622_write() return value Documentation:devicetree:bindings:iio:dac: Fix val drivers: iio: dac: ad5766: Fix dt property name iio: st_pressure_spi: Add missing entries SPI to device ID table
2021-10-24platform/x86: system76_acpi: fix Kconfig dependenciesArnd Bergmann
When CONFIG_INPUT is disabled, this driver now fails to link: ld.lld: error: undefined symbol: devm_input_allocate_device >>> referenced by system76_acpi.c >>> platform/x86/system76_acpi.o:(system76_add) in archive drivers/built-in.a ld.lld: error: undefined symbol: input_set_capability >>> referenced by system76_acpi.c >>> platform/x86/system76_acpi.o:(system76_add) in archive drivers/built-in.a ld.lld: error: undefined symbol: devm_hwmon_device_register_with_info >>> referenced by system76_acpi.c >>> platform/x86/system76_acpi.o:(system76_add) in archive drivers/built-in.a ld.lld: error: undefined symbol: battery_hook_unregister >>> referenced by system76_acpi.c >>> platform/x86/system76_acpi.o:(system76_remove) in archive drivers/built-in.a Add Kconfig dependencies for each of these three. Fixes: 0de30fc684b3 ("platform/x86: system76_acpi: Replace Fn+F2 function for OLED models") Fixes: 95563d45b5da ("platform/x86: system76_acpi: Report temperature and fan speed") Fixes: 76f7eba3e0a2 ("platform/x86: system76_acpi: Add battery charging thresholds") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211022154901.904984-1-arnd@kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-24platform/x86: barco-p50-gpio: use KEY_VENDOR for button instead of KEY_RESTARTPeter Korsgaard
It turns out that systemd-logind by default listens for KEY_RESTART input events and reboots the machine, which isn't great - So use KEY_VENDOR for the vendor specific identify button instead to not conflict. Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> Link: https://lore.kernel.org/r/20211022124612.19780-1-peter@korsgaard.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-10-23soc: qcom: qcom_stats: Fix client votes offsetMaulik Shah
Client votes starts at 0x20 offset. Correct the offset. Reported-and-suggested-by: Shawn Guo <shawn.guo@linaro.org> Fixes: 1d7724690344 ("soc: qcom: Add Sleep stats driver") Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1634719753-26064-1-git-send-email-mkshah@codeaurora.org
2021-10-23soc: qcom: rpmhpd: fix sm8350_mxc's peer domainDmitry Baryshkov
The sm8350_mxc's domain description incorrectly references sm8150_mmcx_ao as a peer instead of sm8350_mxc_ao. Correct this typo. Fixes: 639c85628757 ("soc: qcom: rpmhpd: Add SM8350 power domains") Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020012639.1183806-1-dmitry.baryshkov@linaro.org
2021-10-23firmware: qcom: scm: Add support for MC boot address APIStephan Gerhold
It looks like the old QCOM_SCM_BOOT_SET_ADDR API is broken on some MSM8916 firmware versions that implement the newer SMC32 calling convention. It just returns -EINVAL no matter which arguments are being passed. This does not cause any problems downstream because it first tries to use the new multi-cluster API replacement which is working fine. Implement support for the multi-cluster variant of the SCM call by attempting it first but still fallback to the old call in case of an error. Also, to be absolutely sure only use the multi-cluster variant with the SMC calling convention since older platforms should not need this. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004204955.21077-12-stephan@gerhold.net
2021-10-23soc: qcom: spm: Add 8916 SPM register dataLina Iyer
Add SPM register information and initialization values for QCOM 8916 SoC. Link: https://lore.kernel.org/linux-arm-msm/1429314549-6730-5-git-send-email-lina.iyer@linaro.org/ Signed-off-by: Lina Iyer <lina.iyer@linaro.org> [stephan: rebase patch and fix conflicts] Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004204955.21077-11-stephan@gerhold.net
2021-10-23soc: qcom: socinfo: Add PM8150C and SMB2351 modelsBjorn Andersson
Add PM8150C and SMB2351 to the list of known PMIC models. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20211005024025.2037810-1-bjorn.andersson@linaro.org
2021-10-23firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()Guru Das Srinagesh
Since __qcom_scm_is_call_available() returns bool, have it return false instead of -EINVAL if an invalid SMC convention is detected. This fixes the Smatch static checker warning: drivers/firmware/qcom_scm.c:255 __qcom_scm_is_call_available() warn: signedness bug returning '(-22)' Fixes: 9d11af8b06a8 ("firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1633982414-28347-1-git-send-email-quic_gurus@quicinc.com
2021-10-23regmap: spi: Set regmap max raw r/w from max_transfer_sizeLucas Tanure
Set regmap raw read/write from spi max_transfer_size so regmap_raw_read/write can split the access into chunks Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> [André: fix build warning] Signed-off-by: André Almeida <andrealmeid@collabora.com> Link: https://lore.kernel.org/r/20211021132721.13669-1-andrealmeid@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-23Merge series "Remove TPS80031 driver" from Dmitry Osipenko <digetx@gmail.com>:Mark Brown
TPS80031 driver was upstreamed back in 2013 and never got a user. I noticed that driver is abandoned while was about to write a patch to switch it to a new power-off API (that I'm working on). Driver requires platform data that nobody provides. Instead of changing the dead code, let's remove it. Dmitry Osipenko (3): rtc: tps80031: Remove driver regulator: tps80031: Remove driver mfd: tps80031: Remove driver drivers/mfd/Kconfig | 14 - drivers/mfd/Makefile | 1 - drivers/mfd/tps80031.c | 526 ----------------- drivers/regulator/Kconfig | 9 - drivers/regulator/Makefile | 1 - drivers/regulator/tps80031-regulator.c | 753 ------------------------- drivers/rtc/Kconfig | 8 - drivers/rtc/Makefile | 1 - drivers/rtc/rtc-tps80031.c | 324 ----------- include/linux/mfd/tps80031.h | 637 --------------------- 10 files changed, 2274 deletions(-) delete mode 100644 drivers/mfd/tps80031.c delete mode 100644 drivers/regulator/tps80031-regulator.c delete mode 100644 drivers/rtc/rtc-tps80031.c delete mode 100644 include/linux/mfd/tps80031.h -- 2.32.0
2021-10-23drm/msm/dpu: Remove dynamic allocation from atomic contextRob Clark
We know the upper bound on # of mixers (ie. two), so lets just allocate this on the stack. Fixes: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:201 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0 INFO: lockdep is turned off. irq event stamp: 43642 hardirqs last enabled at (43641): [<ffffffe24dd276bc>] cpuidle_enter_state+0x158/0x25c hardirqs last disabled at (43642): [<ffffffe24dfff450>] enter_el1_irq_or_nmi+0x10/0x1c softirqs last enabled at (43620): [<ffffffe24d4103fc>] __do_softirq+0x1e4/0x464 softirqs last disabled at (43615): [<ffffffe24d48bd90>] __irq_exit_rcu+0x104/0x150 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.0-rc3-debug+ #105 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Call trace: dump_backtrace+0x0/0x18c show_stack+0x24/0x30 dump_stack_lvl+0xa0/0xd4 dump_stack+0x18/0x34 ___might_sleep+0x1e0/0x1f0 __might_sleep+0x78/0x8c slab_pre_alloc_hook.constprop.0+0x48/0x6c __kmalloc+0xc8/0x21c dpu_crtc_vblank_callback+0x158/0x1f8 dpu_encoder_vblank_callback+0x70/0xc4 dpu_encoder_phys_vid_vblank_irq+0x50/0x12c dpu_core_irq+0x1bc/0x1d0 dpu_irq+0x1c/0x28 msm_irq+0x34/0x40 __handle_irq_event_percpu+0x15c/0x308 handle_irq_event_percpu+0x3c/0x90 handle_irq_event+0x54/0x98 handle_level_irq+0xa0/0xd0 handle_irq_desc+0x2c/0x44 generic_handle_domain_irq+0x28/0x34 dpu_mdss_irq+0x90/0xe8 handle_irq_desc+0x2c/0x44 handle_domain_irq+0x54/0x80 gic_handle_irq+0xd4/0x148 call_on_irq_stack+0x2c/0x54 do_interrupt_handler+0x4c/0x64 el1_interrupt+0x30/0xd0 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x78/0x7c arch_local_irq_enable+0xc/0x14 cpuidle_enter+0x44/0x5c do_idle+0x248/0x268 cpu_startup_entry+0x30/0x48 rest_init+0x188/0x19c arch_call_rest_init+0x1c/0x28 start_kernel+0x704/0x744 __primary_switched+0xc0/0xc8 Fixes: 78d9b458cc21 ("drm/msm/dpu: Add CRC support for DPU") Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20211023160016.3322052-2-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-23drm/msm/dpu: Remove impossible NULL checkRob Clark
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jessica Zhang <jesszhan@codeaurora.org> Link: https://lore.kernel.org/r/20211023160016.3322052-1-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-23regulator: Don't error out fixed regulator in regulator_sync_voltage()Dmitry Osipenko
Fixed regulator can't change voltage and regulator_sync_voltage() returns -EINVAL in this case. Make regulator_sync_voltage() to succeed for regulators that are incapable to change voltage. On NVIDIA Tegra power management driver needs to sync voltage and we have one device (Trimslice) that uses fixed regulator which is getting synced. The syncing error isn't treated as fatal, but produces a noisy error message. This patch silences that error. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211021183308.27786-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-23regulator: tps80031: Remove driverDmitry Osipenko
Driver was upstreamed in 2013 and never got a user, remove it. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211021192258.21968-3-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-23regulator: Fix SY7636A breakageMark Brown
The MFD for SY7636A still isn't merged so we need a dependency even if it ends up not having a real driver due to the header file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2021-10-23mt76: connac: fix unresolved symbols when CONFIG_PM is unsetFelix Fietkau
mt76_connac_mcu_reg_* functions are always needed by connac based drivers Fixes: 87f9bf24ea84 ("mt76: connac: move mcu reg access utility routines in mt76_connac_lib module") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: Make use of the helper macro kthread_run()Cai Huoqing
Repalce kthread_create/wake_up_process() with kthread_run() to simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: Print error message when reading EEPROM from mtd failedHauke Mehrtens
When the EEPROM data is stored on a MTD partition print an error message when reading this MTD partition failed. This is currently happening often in OpenWrt because the initial data was written with using a flash driver which ignores the error detection data and now OpenWrt uses a driver which checks it. With this patch a better error message is shown: [ 8.986988] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20201105222323 [ 9.100508] mt7915e 0000:01:00.0: reading EEPROM from mtd factory failed: -117 [ 9.144289] mt7915e: probe of 0000:01:00.0 failed with error -22 mt7915 does not work without an EEPROM, MT7922 still works. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7921: disable 4addr capabilityLorenzo Bianconi
4addr is not supported by the driver/firmware yet Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add debugfs knobs for MCU utilizationShayne Chen
Add debugfs knobs to read MCU utilization, which helps user know firmware status more easily to narrow down CPU bottleneck issues. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: add WA firmware log supportShayne Chen
Support to turn on/off WA firmware log from debugfs. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: fix endiannes warning mt7915_mcu_beacon_check_capsLorenzo Bianconi
Fix the following sparse warning mt7915_mcu_beacon_check_caps routine: warning: cast to restricted __le32 warning: cast from restricted __le16 Fixes: 22dffbddf0167 ("mt76: mt7915: introduce mt7915_mcu_beacon_check_caps()") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework debugfs fixed-rate knobRyder Lee
Switch to use new mt7915_mcu_set_fixed_rate_ctrl(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: rework .set_bitrate_mask() to support more optionsRyder Lee
With this patch, driver can support single rate, (HE)GI and HE_LTF configuration through .set_bitrate_mask(). Tested-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7915: remove mt7915_mcu_add_he()Ryder Lee
Make mt7915_mcu_sta_he_tlv() as a part of mt7915_mcu_add_rate_ctrl() as firmware rate control should get HE rate information from sta_rec_he, and reduce a global function accordingly. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7615: apply cached RF data for DBDCRyder Lee
Band0 and band1 share the same hardware, so band0 will stop Tx/Rx when band1 performs Rx calibration. cal_cache is introduced to solve such corner cases by moving necessary datas from channel_switch to bootup. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-23mt76: mt7615: mt7622: fix ibss and meshpointNick Hainke
commit 7f4b7920318b ("mt76: mt7615: add ibss support") introduced IBSS and commit f4ec7fdf7f83 ("mt76: mt7615: enable support for mesh") meshpoint support. Both used in the "get_omac_idx"-function: if (~mask & BIT(HW_BSSID_0)) return HW_BSSID_0; With commit d8d59f66d136 ("mt76: mt7615: support 16 interfaces") the ibss and meshpoint mode should "prefer hw bssid slot 1-3". However, with that change the ibss or meshpoint mode will not send any beacon on the mt7622 wifi anymore. Devices were still able to exchange data but only if a bssid already existed. Two mt7622 devices will never be able to communicate. This commits reverts the preferation of slot 1-3 for ibss and meshpoint. Only NL80211_IFTYPE_STATION will still prefer slot 1-3. Tested on Banana Pi R64. Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces") Signed-off-by: Nick Hainke <vincent@systemli.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211007225725.2615-1-vincent@systemli.org
2021-10-23mt76: mt7921: fix Wformat build warningRandy Dunlap
ARRAY_SIZE() is of type size_t, so the format specfier should be %zu instead of %lu. Fixes this build warning: ../drivers/net/wireless/mediatek/mt76/mt7921/main.c: In function ‘mt7921_get_et_stats’: ../drivers/net/wireless/mediatek/mt76/mt7921/main.c:1024:26: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘unsigned int’ [-Wformat=] dev_err(dev->mt76.dev, "ei: %d SSTATS_LEN: %lu", Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sean Wang <sean.wang@mediatek.com> Cc: linux-wireless@vger.kernel.org Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211022233251.29987-1-rdunlap@infradead.org
2021-10-23mt76: mt7921: fix mt7921s KconfigLorenzo Bianconi
Add missing MMC dependency in mt7921s Kconfig: ld: drivers/net/wireless/mediatek/mt76/sdio.o: in function `mt76s_rr': sdio.c:(.text+0x1263): undefined reference to `sdio_claim_host' ld: sdio.c:(.text+0x1278): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x12c8): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x1327): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x134d): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x138c): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x140f): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x1498): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x14e5): undefined reference to `sdio_release_host' ld: drivers/net/wireless/mediatek/mt76/sdio.o: in function `mt76s_wr': sdio.c:(.text+0x1599): undefined reference to `sdio_claim_host' ld: sdio.c:(.text+0x15ae): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x15f9): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x1646): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x16a5): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x16cb): undefined reference to `sdio_writel' ld: sdio.c:(.text+0x170a): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x1782): undefined reference to `sdio_readl' ld: sdio.c:(.text+0x17e9): undefined reference to `sdio_release_host' Fixes: 48fab5bbef409 ("mt76: mt7921: introduce mt7921s support") Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1ce6cb04ba1ab5aabd2b06b45fd8266537ef5359.1634893214.git.lorenzo@kernel.org
2021-10-22net: dsa: sja1105: Add of_node_put() before returnWan Jiabing
Fix following coccicheck warning: ./drivers/net/dsa/sja1105/sja1105_main.c:1193:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before return. Early exits from for_each_available_child_of_node should decrement the node reference counter. Fixes: 9ca482a246f0 ("net: dsa: sja1105: parse {rx, tx}-internal-delay-ps properties for RGMII delays") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211021094606.7118-1-wanjiabing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22Merge tag 'hyperv-fixes-signed-20211022' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyper-v fix from Wei Liu: - Fix vmbus ARM64 build (Arnd Bergmann) * tag 'hyperv-fixes-signed-20211022' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyperv/vmbus: include linux/bitops.h
2021-10-22hyperv/vmbus: include linux/bitops.hArnd Bergmann
On arm64 randconfig builds, hyperv sometimes fails with this error: In file included from drivers/hv/hv_trace.c:3: In file included from drivers/hv/hyperv_vmbus.h:16: In file included from arch/arm64/include/asm/sync_bitops.h:5: arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly In file included from include/asm-generic/bitops/hweight.h:5: include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration] include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration] Include the correct header first. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-10-22Merge tag 'acpi-5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix two regressions, one related to ACPI power resources management and one that broke ACPI tools compilation. Specifics: - Stop turning off unused ACPI power resources in an unknown state to address a regression introduced during the 5.14 cycle (Rafael Wysocki). - Fix an ACPI tools build issue introduced recently when the minimal stdarg.h was added (Miguel Bernal Marin)" * tag 'acpi-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Do not turn off power resources in unknown state ACPI: tools: fix compilation error
2021-10-22net: liquidio: Make use of the helper macro kthread_run()Cai Huoqing
Repalce kthread_create/wake_up_process() with kthread_run() to simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20211021084158.2183-1-caihuoqing@baidu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22Merge tag 'wireless-drivers-next-2021-10-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.16 Second set of patches for v5.16 and this time we have a big one. We have the new Realtek driver rtw89 with over 90 kLOC and also over 150 patches for mt76. ath9k also got few new small features. And the usual cleanups and fixes all over. Major changes: rtw89 * new Realtek 802.11ax driver * supports Realtek 8852AE 802.11ax 2x2 chip ath9k * add option to reset the wifi chip via debugfs * convert Device Tree bindings to the json-schema * support Device Tree ieee80211-freq-limit property to limit channels mt76 * mt7921 aspm support * mt7921 testmode support * mt7915 LED support * mt7921 6GHz band support * support for eeprom data in DT * mt7915 TWT support * mt7921s SDIO support * tag 'wireless-drivers-next-2021-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (213 commits) zd1201: use eth_hw_addr_set() wl3501_cs: use eth_hw_addr_set() ray_cs: use eth_hw_addr_set() ... ==================== Link: https://lore.kernel.org/r/20211022075845.0E679C4360D@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22Merge tag 'mac80211-next-for-net-next-2021-10-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Quite a few changes: * the applicable eth_hw_addr_set() and const hw_addr changes * various code cleanups/refactorings * stack usage reductions across the wireless stack * some unstructured find_ie() -> structured find_element() changes * a few more pieces of multi-BSSID support * some 6 GHz regulatory support * 6 GHz support in hwsim, for testing userspace code * Light Communications (LC, 802.11bb) early band definitions to be able to add a first driver soon * tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits) cfg80211: fix kernel-doc for MBSSID EMA mac80211: Prevent AP probing during suspend nl80211: Add LC placeholder band definition to nl80211_band ... ==================== Link: https://lore.kernel.org/r/20211021154953.134849-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: hldc_fr: use dev_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: sb1000,rionet: use eth_hw_addr_set()Jakub Kicinski
Get these two oldies ready for constant netdev->dev_addr. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: plip: use eth_hw_addr_set()Jakub Kicinski
Get it ready for constant netdev->dev_addr. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: s390: constify and use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Make sure local references to netdev->dev_addr are constant. Acked-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: hippi: use dev_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: fjes: constify and use eth_hw_addr_set()Jakub Kicinski
Get it ready for constant netdev->dev_addr. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22fddi: skfp: constify and use dev_addr_set()Jakub Kicinski
Get it ready for constant netdev->dev_addr. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22fddi: defxx,defza: use dev_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: usb: don't write directly to netdev->dev_addrJakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Manually fix all net/usb drivers without separate maintainers. v2: catc does DMA to the buffer, leave the conversion to Oliver Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: qmi_wwan: use dev_addr_mod()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22usb: smsc: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22net: xen: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 00:52:57 +0000